Items with Index Term: construction and demolition

Abadi, M and Sammuneh, M A (2020) Integrating circular economy and constructability research: An initial development of a lifecycle "circularity" assessment framework and indicators. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Abdelshafy, A and Walther, G (2023) Using dynamic-locational material flow analysis to model the development of urban stock. Building Research & Information, 51(1), pp. 5-20. ISSN 0961-3218

Abdullahi, A L (2016) Ethnomimicry: the development of a conceptual model of the Nigerian practice of the end-of-life management of buildings. PhD thesis, University of Huddersfield, UK.

Adjei, S; Ankrah, N; Ndekugri, I and Searle, D (2015) Investigating the extent to which waste management legislation affects waste management practices within the UK construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Adjei, S D; Ankrah, N A; Adukpo, S E; Ndekugri, I and Searle, D (2024) Factors influencing the extent of waste management on construction sites. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Ajisomo, T. O.; Saka, A.; Dauda, J. and Osuolale, M. (2025) Investigating circular economy barriers for construction and demolition waste in the construction industry: A Delphi and interpretive structural modelling approach. Construction Innovation, 26(4), pp. 1278-1308. ISSN 1471-4175

Ali, A (2018) Development of a framework for sustainable construction waste management: a case study of three major Libyan cities. PhD thesis, University of Wolverhampton, UK.

Ali, S (2022) Identification of key factors that aid the decision on whether to refurbish-reuse or demolish-rebuild existing and newly designed buildings and highways. PhD thesis, London South Bank University, UK.

Alkhraisha, A (2023) Approaches for enhancing the construction and demolition waste management strategy in Jordan. PhD thesis, Anglia Ruskin University, UK.

Alshdiefat, A S; Sharif, A A; Alharahsheh, A I; Albrka, S I; Olsson, N O E; Younes, M and Bang, S (2025) Construction and demolition waste management in Jordan: A multifaceted perspective. Construction Innovation, 25(2), pp. 290-305. ISSN 1471-4175

Andersson, R and Buser, M (2020) On the road to nowhere? The challenges of aligning construction and demolition waste practices with circular economy. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Andersson, R and Buser, M (2022) From waste to resource management? Construction and demolition waste management through the lens of institutional work. Construction Management and Economics, 40(6), pp. 477-496. ISSN 01446193

Andersson, R; Buser, M and Bosch, P (2019) Improving renovation waste management in Sweden: The role of the demolition company. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Anike, E E; Saidani, M; Ganjian, E; Tyrer, M and Olubanwo, A O (2019) The potency of recycled aggregate in new concrete: a review. Construction Innovation, 19(4), pp. 594-613. ISSN 1471-4175

Babahaji Meibodi, A (2015) On-site concrete waste minimisation in Iran. PhD thesis, Kingston University, UK.

Besklubova, S; Kravchenko, E; Kasprzhitskii, A; Lazorenko, G and Zhong, R Y (2026) Establishing a market for carbon-neutral technology in concrete waste recycling by sequestering flue co 2: An evolutionary game theory-based case study in Hong Kong. Journal of Construction Engineering and Management, 152(4): 04026017, ISSN 0733-9364

Bohne, R A (2005) Eco-efficiency and performance strategies in construction and demolition waste recycling systems. PhD thesis, Norges Teknisk-Naturvitenskapelige Universitet, Norway.

Bosch-Sijtsema, P and Buser, M (2017) Construction and demolition waste management on the building site: A literature review. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Buser, M and Bosch-Sijtsema, P (2018) Attributing value to waste: The difficult road to efficient waste management for renovation projects. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Carollo, Federica Carla (2023) Circularity in the construction and demolition waste management chain. PhD thesis, Politecnico di Milano, Italy.

Chen, Z; Zhou, X; Zhang, Z; Yan, H; Niu, X and Li, Y (2025) Using the decomposed theory of planned behavior and a structural equation model with partial least squares to investigate construction and demolition waste reduction behavior. Journal of Construction Engineering and Management, 151(8): 04025105, ISSN 0733-9364

Chen, Z; li, H and Wong, C T C (2003) Webfill before landfill: An e-commerce model for waste exchange in Hong Kong. Construction Innovation, 3(1), pp. 27-43. ISSN 1471-4175

Cheng, B; Huang, J; Guo, Z; Li, J and Chen, H (2023) Towards sustainable construction through better construction and demolition waste management practices: A SWOT analysis of Suzhou, China. International Journal of Construction Management, 23(15), pp. 2614-2624. ISSN 1562-3599

Cho, N (2020) Using industry data to make an impact on construction practices over the project lifecycle. PhD thesis, Arizona State University, USA.

Cochran, K M (2006) Construction and demolition debris recycling: Methods, markets, and policy. PhD thesis, University of Florida, USA.

Cordoba, Rodrigo Eduardo (2014) Study of the influence of leachates from civil construction waste landfills on water resource quality. PhD thesis, Universidade de São Paulo, Brazil.

Correia, J M F; De Oliveira Neto, G C; Leite, R R and Da Silva, D (2021) Plan to overcome barriers to reverse logistics in construction and demolition waste: Survey of the construction industry. Journal of Construction Engineering and Management, 147(2): 04020172, ISSN 0733-9364

Craighill, A L (2002) Lifecycle assessment and evaluation of construction and demolition waste management. PhD thesis, University of East Anglia, UK.

Cruz Rios, F (2018) Beyond recycling: Design for disassembly, reuse, and circular economy in the built environment. PhD thesis, Arizona State University, USA.

Daoud, A O; Othman, A A E; Ebohon, O J and Bayyati, A (2023) Analysis of factors affecting construction and demolition waste reduction in Egypt. International Journal of Construction Management, 23(8), pp. 1395-1404. ISSN 1562-3599

Daoud, A O E (2021) Materials procurement conceptual framework for minimising waste in the Egyptian construction industry. PhD thesis, London South Bank University, UK.

De Luca, A; Chen, L and Gharehbaghi, K (2021) Sustainable utilization of recycled aggregates: Robust construction and demolition waste reduction strategies. International Journal of Building Pathology and Adaptation, 39(4), pp. 666-682. ISSN 23984708

De Venny, A S (1999) Recycling of demolished masonry rubble. PhD thesis, Edinburgh Napier University, UK.

Ding, Z; Nie, W; Tam, V W Y and Illankoon, C (2025) Consumer purchase intention for extrinsic and intrinsic cues of construction and demolition waste recycled products. Engineering, Construction and Architectural Management, 32(6), pp. 3565-3586. ISSN 0969-9988

Doan, D. T.; Albsoul, H.; Shobha, A. R.; GhaffarianHoseini, A. and Ghaffarianhoseini, A. (2026) An integrated challenge-strategy framework for construction waste management in New Zealand: Behavioural and organisational challenges and strategies. Engineering, Construction and Architectural Management, pp. 1-22. ISSN 0969-9988

Doan, D T (2019) Enhancing green star certification by improving bim uptake through system dynamics modelling. PhD thesis, Auckland University of Technology, New Zealand.

Doan, D T and Chinda, T (2016) Modeling construction and demolition waste recycling program in Bangkok: Benefit and cost analysis. Journal of Construction Engineering and Management, 142(12): 05016015, ISSN 0733-9364

Domingo, N; Osmani, M and Price, A D F (2008) Reducing construction waste in healthcare facilities: A project lifecycle approach. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Eghbali-Zarch, M; Tavakkoli-Moghaddam, R; Dehghan-Sanej, K and Kaboli, A (2022) Prioritizing the effective strategies for construction and demolition waste management using fuzzy idocriw and waspas methods. Engineering, Construction and Architectural Management, 29(3), pp. 1109-1138. ISSN 0969-9988

Elshaboury, N and Marzouk, M (2021) Optimizing construction and demolition waste transportation for sustainable construction projects. Engineering, Construction and Architectural Management, 28(9), pp. 2411-2425. ISSN 0969-9988

Emmer, M J (2009) A decision process model for closing the structural steel materials loop in construction. PhD thesis, University of Florida, USA.

Esa, Mohd Reza (2018) Moving towards sustainable construction in Malaysia: A holistic model for construction and demolition (c&d) waste management. PhD thesis, University of Queensland, Australia.

Esguicero, Fabio Jose (2020) Framework applied to process modeling in municipal management of construction waste. PhD thesis, Universidade Estadual Paulista Júlio de Mesquita Filho, Brazil.

Farias, Izaura Pereira (2014) Proposal of a construction waste management model for the eastern zone of the city of Teresina, Piauí. PhD thesis, Universidade Estadual Paulista Júlio de Mesquita Filho, Brazil.

Forghani, R; Sher, W and Kanjanabootra, S (2023) Critical technical design principles for maximizing the reuse of building components. International Journal of Construction Management, 23(7), pp. 1187-1195. ISSN 1562-3599

Geus, Lucio Marcos de (2016) A support model for defining the location of voluntary delivery points for small construction and demolition waste generators. PhD thesis, Pontifícia Universidade Católica do Paraná, Brazil.

Gholami Rostam, Mehdi (2024) Energy efficiency assessment in building designs integrating climate resilience and long-term environmental sustainability. PhD thesis, University of New South Wales, Australia.

Giorgi, Serena (2020) Circular economy and regeneration of building stock: Policy improvements, strategic partnerships and life cycle decision-making tools. PhD thesis, Politecnico di Milano, Italy.

Guerra, B C; Koo, H J; Caldas, C and Leite, F (2024) Prediction of waste diversion and identification of trends in construction and demolition waste data using data mining. International Journal of Construction Management, 24(4), pp. 374-383. ISSN 1562-3599

Guerra, Beatriz Chinelato (2021) BIM-based construction waste management and circular economy for resource recovery. PhD thesis, University of Texas at Austin, USA.

Gupta, S; Jha, K N and Vyas, G (2022) Proposing building information modeling-based theoretical framework for construction and demolition waste management: Strategies and tools. International Journal of Construction Management, 22(12), pp. 2345-2355. ISSN 1562-3599

Gupta, S; Jha, K N and Vyas, G (2024) Construction and demolition waste causative factors in building projects: Survey of the Indian construction industry experiences. International Journal of Construction Management, 24(4), pp. 432-442. ISSN 1562-3599

Hao, J L; Hills, M J and Huang, T (2007) A simulation model using system dynamic method for construction and demolition waste management in Hong Kong. Construction Innovation, 7(1), pp. 7-21. ISSN 1471-4175

Hao, J L J; Tam, V W Y; Yuan, H P; Wang, J Y and Li, J R (2010) Dynamic modeling of construction and demolition waste management processes: An empirical study in Shenzhen, China. Engineering, Construction and Architectural Management, 17(5), pp. 476-492. ISSN 0969-9988

Hasan, M R; Sagar, M S I and Ray, B C (2023) Barriers to improving construction and demolition waste management in Bangladesh. International Journal of Construction Management, 23(14), pp. 2333-2347. ISSN 1562-3599

Hassan, N M and Alashwal, A (2025) Developing a model for the implementation of designing out waste in construction. Architectural Engineering and Design Management, 21(1), pp. 154-170. ISSN 1745-2007

Hiete, M; Stengel, J; Ludwig, J and Schultmann, F (2011) Matching construction and demolition waste supply to recycling demand: A regional management chain model. Building Research & Information, 39(4), pp. 333-351. ISSN 0961-3218

Huuhka, S and Lahdensivu, J (2016) Statistical and geographical study on demolished buildings. Building Research & Information, 44(1), pp. 73-96. ISSN 0961-3218

Inácio, M F M (1999) The building deconstruction process and the debris trail: towards a dynamic model. PhD thesis, University of Salford, UK.

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Jain, S; Singhal, S and Jain, N K (2021) Construction and demolition waste (C&DW) in India: Generation rate and implications of C&DW recycling. International Journal of Construction Management, 21(3), pp. 261-270. ISSN 1562-3599

Jones, W; Gibb, A; Goodier, C and Bust, P (2017) Managing the unknown: Addressing the potential health risks of nanomaterials in the built environment. Construction Management and Economics, 35(3), pp. 122-136. ISSN 0144-6193

Kabirifar, Kamyar (2022) Effective construction and demolition waste management assessment: A case of Australian large construction companies. PhD thesis, University of New South Wales, Australia.

Kamma, R C and Jha, K N (2026) Significant causes of construction waste in road projects. International Journal of Construction Management, 26(6), pp. 944-959. ISSN 1562-3599

Kamma, R C and Jha, K N (2022) Quantifying building construction and demolition waste using permit data. Journal of Construction Engineering and Management, 148(9): 04022091, ISSN 0733-9364

Karunasena, G and Amaratunga, D (2015) Capacity gaps in post disaster construction and demolition waste management. Engineering, Construction and Architectural Management, 22(4), pp. 446-466. ISSN 0969-9988

Karunasena, G I (2012) Capacity building for post disaster waste management: Construction and demolition waste. PhD thesis, University of Salford, UK.

Khan, M W and Ali, Y (2020) Sustainable construction: Lessons learned from life cycle assessment (LCA) and life cycle cost analysis (LCCA). Construction Innovation, 20(2), pp. 191-207. ISSN 1471-4175

Kim, S Y; Nguyen, M V and Luu, V T (2020) A performance evaluation framework for construction and demolition waste management: Stakeholder perspectives. Engineering, Construction and Architectural Management, 27(10), pp. 3189-3213. ISSN 0969-9988

Kretzschmar, D and Schiller, G (2023) Non-domestic building stock: Linking dynamics and spatial distributions. Buildings & Cities, 4(1), pp. 727-748. ISSN 2632-6655

Lara, Beatriz Leão Evangelista de (2024) Construction and demolition waste prevention analysis of benefits in the context of social housing. PhD thesis, Universidade Estadual de Campinas, Brazil.

Li, Guokai (2024) A research on construction and demolition waste management. PhD thesis, Università degli Studi di Padova, Italy.

Li, J; Zuo, J; Jiang, W; Zhong, X; Li, J and Pan, Y (2020) Policy instrument choice for construction and demolition waste management: The case study of Shenzhen, China. Engineering, Construction and Architectural Management, 27(6), pp. 1283-1297. ISSN 0969-9988

Li, K; Salleh, H B; Wang, R and Yang, Y (2025) How do different policy instruments influence circular economy implementation in the construction sector? Building Research & Information, 53(3), pp. 359-374. ISSN 0961-3218

Li, Liancheng (2025) Towards sustainable recovery of waste plastics with the Australian construction industry: Transition scenarios and environmental impact evaluation. PhD thesis, University of Adelaide, Australia.

Li Hao, J; Hill, M J and Yin Shen, L (2008) Managing construction waste on-site through system dynamics modelling: The case of Hong Kong. Engineering, Construction and Architectural Management, 15(2), pp. 103-113. ISSN 0969-9988

Lima, Rosimeire Midori Suzuki Rosa (2012) Evaluation system of integrated construction and demolition waste management at the municipal level. PhD thesis, Universidade de São Paulo, Brazil.

Lingard, H; Graham, P and Smithers, G (1997) Waste management in the Australian construction industry: A human factors approach. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Lingard, H; Graham, P and Smithers, G (2000) Employee perceptions of the solid waste management system operating in a large Australian contracting organization: Implications for company policy implementation. Construction Management and Economics, 18(4), pp. 383-393. ISSN 01446193

Liu, J.; Liu, H. and Li, Y. (2026) Facilitating collaborative construction and demolition waste governance: An sfic approach. International Journal of Construction Management, 26(9), pp. 1836-1857. ISSN 1562-3599

Lu, W; Webster, C; Peng, Y; Chen, X and Zhang, X (2017) Estimating and calibrating the amount of building-related construction and demolition waste in urban China. International Journal of Construction Management, 17(1), pp. 13-24. ISSN 1562-3599

Marcellus-Zamora, K A (2015) An evaluation of material stocks and flows found during construction and demolition activities in the Philadelphia region of the United States. PhD thesis, Drexel University, USA.

Marques Neto, José da Costa (2009) Study on municipal management of construction and demolition wastes in the turvo grande watershed (urghi-15). PhD thesis, Universidade de São Paulo, Brazil.

Marrero, M and Ramirez-De-Arellano, A (2010) The building cost system in andalusia: Application to construction and demolition waste management. Construction Management and Economics, 28(5), pp. 495-507. ISSN 1466433X

Mater, Y; Kamel, M; Karam, A and Bakhoum, E (2023) Ann-python prediction model for the compressive strength of green concrete. Construction Innovation, 23(2), pp. 340-359. ISSN 1471-4175

Munaro, M R and Tavares, S F (2025) Design for adaptability and disassembly: Guidelines for building deconstruction. Construction Innovation, 25(2), pp. 665-687. ISSN 1471-4175

Newaz, M T; Davis, P; Sher, W and Simon, L (2022) Factors affecting construction waste management streams in Australia. International Journal of Construction Management, 22(13), pp. 2625-2633. ISSN 1562-3599

Nie, P; Dahanayake, K C and Sumanarathna, N (2024) Exploring uae's transition towards circular economy through construction and demolition waste management in the pre-construction stage–a case study approach. Smart and Sustainable Built Environment, 13(2), pp. 246-266. ISSN 2046-6099

Nikmehr, B; Hosseini, M R; Rameezdeen, R; Chileshe, N; Ghoddousi, P and Arashpour, M (2017) An integrated model for factors affecting construction and demolition waste management in Iran. Engineering, Construction and Architectural Management, 24(6), pp. 1246-1268. ISSN 0969-9988

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) A review of the advanced treatment techniques for enriching the recycled concrete aggregates for recycled-based concrete: Economic, environmental and technical analysis. Smart and Sustainable Built Environment, 13(3), pp. 560-583. ISSN 2046-6099

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart and Sustainable Built Environment, 13(2), pp. 395-424. ISSN 2046-6099

Ollár, A (2024) Spatial design for circularity in residential buildings: Exploring the case of the kitchen. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Ortlepp, R; Gruhler, K and Schiller, G (2016) Material stocks in Germany's non-domestic buildings: A new quantification method. Building Research & Information, 44(8), pp. 840-862. ISSN 0961-3218

Oyenuga, A (2016) Economic and environmental impact assessment of construction and demolition waste recycling and reuse using LCA and MCDA management tools. PhD thesis, London South Bank University, UK.

Park, K; Hwang, Y; Seo, S and Seo, H (2003) Quantitative assessment of environmental impacts on life cycle of highways. Journal of Construction Engineering and Management, 129(1), pp. 25-31. ISSN 0733-9364

Paz, Diogo Henrique Fernandes da (2019) Development of a system to support integrated management of construction and demolition waste. PhD thesis, Universidade Federal de Pernambuco, Brazil.

Peng, C L; Scorpio, D E and Kibert, C J (1997) Strategies for successful construction and demolition waste recycling operations. Construction Management and Economics, 15(1), pp. 49-58. ISSN 01446193

Pittri, H; Agyekum, K; Botchway, E A; Alencastro, J; Oladinrin, O T and Dompey, A M A (2024) Drivers for design for deconstruction (DfD) implementation among design professionals. Smart and Sustainable Built Environment, 13(5), pp. 1134-1154. ISSN 2046-6099

Poon, C S; Yu, A T W and Ng, L H (2003) Comparison of low-waste building technologies adopted in public and private housing projects in Hong Kong. Engineering, Construction and Architectural Management, 10(2), pp. 88-98. ISSN 0969-9988

Poon, C S; Yu, A T W; See, S C and Cheung, E (2004) Minimizing demolition wastes in Hong Kong public housing projects. Construction Management and Economics, 22(8), pp. 799-805. ISSN 01446193

Poon, C S; Yu, A T W; Wong, A and Yip, R (2013) Quantifying the impact of construction waste charging scheme on construction waste management in Hong Kong. Journal of Construction Engineering and Management, 139(5), pp. 466-479. ISSN 0733-9364

Poon, C S; Yu, A T W; Wong, S W and Cheung, E (2004) Management of construction waste in public housing projects in Hong Kong. Construction Management and Economics, 22(7), pp. 675-689. ISSN 01446193

Purushothaman, M B and Seadon, J (2024) System-wide construction waste and their connectivity to construction phases, impacting 5m factors and effects: A systematic review. Smart and Sustainable Built Environment, 13(2), pp. 354-369. ISSN 2046-6099

Ramos, M A P (2023) Determining factors and strategies to promote construction and demolition waste management on a local scale. PhD thesis, Universidade NOVA de Lisboa, Portugal.

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Exploring the barriers for implementing waste trading practices in the construction industry in Australia. Built Environment Project and Asset Management, 11(4), pp. 559-576. ISSN 2044-124X

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Investigation of waste diversion rates in the construction and demolition sector in Australia. Built Environment Project and Asset Management, 11(3), pp. 427-439. ISSN 2044-124X

Rayhan, D S A and Bhuiyan, I U (2025) A framework for evaluation of construction and demolition waste management alternatives using MCDA techniques in the context of Dhaka City. International Journal of Construction Management, 25(4), pp. 481-493. ISSN 1562-3599

Rodrigo, N; Omrany, H; Chang, R and Zuo, J (2024) Leveraging digital technologies for circular economy in construction industry: A way forward. Smart and Sustainable Built Environment, 13(1), pp. 85-116. ISSN 2046-6099

Rondinel-Oviedo, D R (2023) Construction and demolition waste management in developing countries: A diagnosis from 265 construction sites in the lima metropolitan area. International Journal of Construction Management, 23(2), pp. 371-382. ISSN 1562-3599

Rosado, Lais Peixoto (2019) Life cycle assessment of construction and demolition waste management in a Brazilian watershed. PhD thesis, Universidade Estadual de Campinas, Brazil.

Rossetto, Daniel Marc (2024) Incentivising the recovery and utilisation of construction and demolition waste. PhD thesis, University of Adelaide, Australia.

Saeed, F; Mostafa, K; Rauch, C and Hegazy, T (2023) Environmental impact and cost assessment for reusing waste during end-of-life activities on building projects. Journal of Construction Engineering and Management, 149(10): 04023099, ISSN 0733-9364

Salgin, B; Mersky, R L and Agyekum, K (2025) Exploring waste reduction approaches in the architectural design stage of university buildings in the United States. International Journal of Construction Management, 25(5), pp. 510-518. ISSN 1562-3599

Santos, Raphael Lucio Reis dos (2023) Development of a prediction model for generation of construction and demolition waste for proposing a management network in medium-sized municipalities. PhD thesis, Centro Federal de Educação Tecnológica de Minas Gerais, Brazil.

Saradara, S M; Lara, J C F; Swarnakar, V; Rauf, A; Qureshi, R; Fadel, M E and Khalfan, M M A (2024) Construction and demolition waste management in the United Arab Emirates through the 3R principle. Engineering, Construction and Architectural Management, 31(13), pp. 430-454. ISSN 0969-9988

Sayed, N; Badawy, A; Attia, T and Ahmed, A (2025) Cost-benefit analysis of recycled materials in road asphalt layer: A case study in Egypt. Built Environment Project and Asset Management, 15(4), pp. 791-807. ISSN 2044-124X

Sayed Zayed, N.; Badawy Abu-Sena, A. B.; Attia, T. M. and Ahmed, A. (2026) Integrating recycled materials in road construction: A cost-effective and sustainable approach. International Journal of Construction Management, 26(7), pp. 1222-1238. ISSN 1562-3599

Schamne, Annelise Nairne (2022) Building information modeling in construction waste management: Proposal of a conceptual model in the IFC standard. PhD thesis, Universidade Tecnológica Federal do Paraná, Brazil.

Schultmann, F and Sunke, N (2007) Energy-oriented deconstruction and recovery planning. Building Research & Information, 35(6), pp. 602-615. ISSN 0961-3218

Shakantu, M W (2004) An investigation into building material and waste logistics: The case of Cape Town. PhD thesis, Glasgow Caledonian University, UK.

Shakantu, W; Muya, M; Tookey, J and Bowen, P (2008) Flow modelling of construction site materials and waste logistics: A case study from Cape Town, South Africa. Engineering, Construction and Architectural Management, 15(5), pp. 423-439. ISSN 0969-9988

Sharma, R (2021) Effect of wastes and admixtures on compressive strength of concrete. Journal of Engineering, Design and Technology, 19(1), pp. 219-244. ISSN 1726-0531

Shooshtarian, S; Caldera, S; Maqsood, T; Ryley, T and Khalfan, M (2022) An investigation into challenges and opportunities in the Australian construction and demolition waste management system. Engineering, Construction and Architectural Management, 29(10), pp. 4313-4330. ISSN 0969-9988

Shooshtarian, S; Hosseini, M R; Kocaturk, T; Arnel, T and T. Garofano, N (2023) Circular economy in the Australian AEC industry: Investigation of barriers and enablers. Building Research & Information, 51(1), pp. 56-68. ISSN 0961-3218

Shooshtarian, S; Maqsood, T; Wong, P S P; Caldera, S; Ryley, T; Zaman, A and Cáceres Ruiz, A M (2024) Circular economy in action: The application of products with recycled content in construction projects: a multiple case study approach. Smart and Sustainable Built Environment, 13(2), pp. 370-394. ISSN 2046-6099

Sierra, L A; Pellicer, E and Yepes, V (2016) Social sustainability in the lifecycle of Chilean public infrastructure. Journal of Construction Engineering and Management, 142(5): 05015020, ISSN 0733-9364

Sirimewan, Diani Chamathya (2025) Optimising construction and demolition waste handling using computer vision techniques. PhD thesis, Monash University, Australia.

Sjökvist, S; Francart, N; Balouktsi, M and Birgisdottir, H (2025) Embodied climate impacts in urban development: a neighbourhood case study. Buildings & Cities, 6(1), pp. 25-49. ISSN 2632-6655

Small-Warner, K (2022) Adopting sustainable business models in small island developing states (SIDS): buildings and construction sector. PhD thesis, De Montfort University, UK.

Souza, Fernando da Silva (2021) Reinsertion of construction and demolition waste into the production chain of civil construction in Rio Branco, Acre. PhD thesis, Universidade Federal de Ouro Preto, Brazil.

Tam, V W Y and Hao, J J L (2014) Prefabrication as a mean of minimizing construction waste on site. International Journal of Construction Management, 14(2), pp. 113-121. ISSN 1562-3599

Tangtinthai, N (2016) Extraction, use and disposal of construction materials in Great Britain and Thailand. PhD thesis, University of Newcastle upon Tyne, UK.

Tighnavard Balasbaneh, A.; Sher, W. and Ashour, A. (2026) Combining the circular economy and bio-based materials for alternative waste wood applications for the construction industry. Engineering, Construction and Architectural Management, 33(5), pp. 4257-4277. ISSN 0969-9988

Tikam, H. and Kothari, C. (2026) Policy instruments for effective construction and demolition waste management. Engineering, Construction and Architectural Management, pp. 1-34. ISSN 0969-9988

Tran, V D (2017) Evaluating the economics of construction and demolition waste minimisation and zero waste in the New Zealand construction industry. PhD thesis, Auckland University of Technology, New Zealand.

Van Der Bent, H S; Visscher, H J; Meijer, A and Mouter, N (2021) Monitoring energy performance improvement: Insights from Dutch housing association dwellings. Buildings & Cities, 2(1), pp. 779-796. ISSN 2632-6655

Victar, H C and Waidyasekara, K G A S (2026) Circular economy strategies for minimising construction waste in Sri Lanka: Focus on the preconstruction stage. Construction Innovation, 26(3), pp. 814-842. ISSN 1471-4175

Victar, H C and Waidyasekara, A S (2025) Optimising construction waste management in Sri Lanka through Circular economy strategies: A focus on construction and renovation and use and operate stages. Engineering, Construction and Architectural Management, 32(7), pp. 4275-4309. ISSN 0969-9988

Volpintesta, Francesco (2024) New eco-sustainable construction materials derived from industrial wastes. PhD thesis, Università degli Studi di Camerino, Italy.

Wang, L (2018) Deconstructable systems for sustainable design of steel and composite structures. PhD thesis, Northeastern University, USA.

Wang, L; Lv, Y; Wang, T; Wan, S and Ye, Y (2025) Assessment of the impacts of the life cycle of construction waste on human health: Lessons from developing countries. Engineering, Construction and Architectural Management, 32(2), pp. 1348-1369. ISSN 0969-9988

Wang, Z; Han, F; Xia, B; Liu, J and Zhang, C (2023) Regional differences and heterogeneity of construction and demolition waste with economic growth: Evidence from China. Construction Management and Economics, 41(1), pp. 44-59. ISSN 01446193

Wang, Z; Xie, W and Liu, J (2022) Regional differences and driving factors of construction and demolition waste generation in China. Engineering, Construction and Architectural Management, 29(6), pp. 2300-2327. ISSN 0969-9988

Wang, Ze (2025) Advancing circular construction in sydney: Integrating system dynamics, evolutionary game theory, and robust optimization for construction and demolition waste management. PhD thesis, University of Sydney, Australia.

Wijewickrama, M K C S; Chileshe, N; Rameezdeen, R and Ochoa, J J (2020) Best practices for diverting demolition waste from landfill: A systematic literature review. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Wilson, B; An, M and Evdorides, H (2006) The effects of building and planning regulations on construction and demolition waste management. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Withana-Gamage, I S (2011) A waste minimisation framework for the procurement of design and build construction projects. PhD thesis, Loughborough University, UK.

Wong, E O W and Yip, R C P (2004) Promoting sustainable construction waste management in Hong Kong. Construction Management and Economics, 22(6), pp. 563-566. ISSN 01446193

Wu, Huanyu (2020) Impacts of cross-regional mobility of construction and demolition waste in Australia. PhD thesis, University of Adelaide, Australia.

Xu, J; Shi, Y and Zhao, S (2019) Reverse logistics network-based multiperiod optimization for construction and demolition waste disposal. Journal of Construction Engineering and Management, 145(2): 04018124, ISSN 0733-9364

Yi, Yanqing (2025) New model for integration life cycle assessment and system dynamics to support the process of construction and demolition waste management. PhD thesis, Università degli Studi di Padova, Italy.

Yu, A T W; Javed, A A; Lam, T I; Shen, G Q and Sun, M (2018) Integrating value management into sustainable construction projects in Hong Kong. Engineering, Construction and Architectural Management, 25(11), pp. 1475-1500. ISSN 0969-9988

Yu, A T W; Mok, K S H and Wong, I (2023) Minimisation and management strategies for refurbishment and renovation waste in Hong Kong. Engineering, Construction and Architectural Management, 30(2), pp. 869-888. ISSN 0969-9988

Yuan, H (2011) A dynamic model for assessing the effectiveness of construction and demolition waste management. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Zhao, Y (2023) Sustainability, acceptance risk analysis and machine learning in assessing mechanical properties and the impact of highway materials in transportation infrastructure. PhD thesis, University of Maryland, College Park, USA.

Šelih, J (2005) Improvement of construction and demolition (C&D) waste management on construction sites. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.