Items with Index Term: compression

Ahmed, M; Shakaib, M and Siddiqui, M A (2024) Analysis and comparison of flow velocities and in-cylinder temperature distributions to quantify oxides of nitrogen in a compression ignition engine using diesel and biodiesel fuels. Journal of Engineering, Design and Technology, 22(2), pp. 422-437. ISSN 1726-0531

Almusharraf, A and Whyte, A (2016) Task-based defect management: Anatomical classification. Built Environment Project and Asset Management, 6(3), pp. 345-358. ISSN 2044-124X

Barker, R; Childerhouse, P; Naim, M; Masat, J and Wilson, D (2004) Potential of total cycle time compression in construction: Focus on program development and design. Journal of Construction Engineering and Management, 130(2), pp. 177-187. ISSN 0733-9364

Beyh, S (2004) Computer and communication engineering: internet protocol telephony in construction. PhD thesis, University of Salford, UK.

Binti Ismail, S H (2016) Musculoskeletal modelling for ergonomics: shoulder & low back loading in bricklaying. PhD thesis, Imperial College London, UK.

Bradley, R A; Gohnert, M and Bulovic, I (2018) Construction considerations for low-cost earth brick shells. Journal of Construction in Developing Countries, 23(1), pp. 43-60. ISSN 1823-6499

Chang, C-K (2004) Quantifying the impact of schedule compression on construction labor productivity. PhD thesis, University of Wisconsin - Madison, USA.

Chen, R; Tan, Y; Zhang, B; Shen, W; Liu, G and Wang, Z (2018) Installation of integral prefabricated bridge abutment and pier with flexible water stop curtain. Journal of Construction Engineering and Management, 144(9): 04018087, ISSN 0733-9364

Coşkunoḡlu, O (1984) Optimal probabilistic compression of PERT networks. Journal of Construction Engineering and Management, 110(4), pp. 437-446. ISSN 0733-9364

De Venny, A S (1999) Recycling of demolished masonry rubble. PhD thesis, Edinburgh Napier University, UK.

França, Valério Henrique (2017) Behavior of piles molded "in loco" instrumented and made witch concrete incorporating rubber residue. PhD thesis, Universidade Estadual de Campinas, Brazil.

Gai, X (2012) Fibre reinforced polymer (FRP) stay-in-place (SIP) participating formwork for new construction. PhD thesis, University of Bath, UK.

Gao, Y; Gan, Y; Chen, Y and Chen, Y (2025) Application of large language models to intelligently analyze long construction contract texts. Construction Management and Economics, 43(3), pp. 226-242. ISSN 0144-6193

Gil, N; Tommelein, I D and Ballard, G (2004) Theoretical comparison of alternative delivery systems for projects in unpredictable environments. Construction Management and Economics, 22(5), pp. 495-508. ISSN 01446193

Halliday, S; Beggs, C and Muneer, T (1999) Is solar air conditioning feasible? Building Research & Information, 27(3), pp. 149-164. ISSN 0961-3218

Hong-minh, S M T (2002) Re-engineering the UK private house building supply chain. PhD thesis, University of Wales College of Cardiff, UK.

Hopkin, D J (2011) The fire performance of engineered timber products and systems. EngD thesis, Loughborough University, UK.

Hoque, M I; Hasan, M and Datta, S D (2026) Undrained shear strength of soft clay reinforced with encapsulated stone dust columns. International Journal of Building Pathology and Adaptation, 44(1), pp. 1-14. ISSN 2398-4708

Jagtap, P R and Pore, S M (2019) Effectiveness of CFRP composites on compression flange of structural I-beam. Journal of Engineering, Design and Technology, 17(4), pp. 782-792. ISSN 1726-0531

Kalasapudi, V S (2017) Automatic change-based diagnosis of structures using spatiotemporal data and as-designed model. PhD thesis, Arizona State University, USA.

Kim, W S; Minh Tam, N and Jung, D H (2005) Experimental study on strength of cement stabilized clay. Journal of Engineering, Design and Technology, 3(2), pp. 116-126. ISSN 1726-0531

Korishetti, A. C. and Malemath, V. S. (2026) Optimal block search mechanism using deep recurrent neural network for enabling the code-efficiency in hevc. Journal of Engineering, Design and Technology, 24(4), pp. 35-62. ISSN 1726-0531

Kourkoulis, S K; Pasiou, E D; Markides, C F; Loukidis, A; Stavrakas, I and Triantis, D (2024) The determination of mode-I fracture toughness (by means of the Brazilian disc configuration) in the light of data provided by the 3D digital image correlation technique. International Journal of Building Pathology and Adaptation, 42(1), pp. 175-192. ISSN 23984708

Lataniotis, C (2019) Data-driven uncertainty quantification for high-dimensional engineering problems. DSc thesis, ETH Zürich, Switzerland.

Li, S; Lin, J; Lin, W; Zheng, J; Tu, Y and Zheng, J (2026) A new energy-saving block and invisible multiribbed frame structure. Construction Innovation, 26(2), pp. 313-327. ISSN 1471-4175

Liu, H; Zhang, F; Ma, R; Wang, L; Chen, Z; Zhang, Q and Guo, L (2024) Intelligent noncontact structural displacement detection method based on computer vision and deep learning. Journal of Construction Engineering and Management, 150(10): 04024127, ISSN 0733-9364

Liu, L and Wan, S (2024) Flexural bearing capacity of reinforced concrete beams reinforced with carbon fiber reinforced plastics strips and ultra-high performance concrete layers. International Journal of Building Pathology and Adaptation, 42(6), pp. 1126-1146. ISSN 2398-4708

Lizana, J; Miranda, N D; Gross, L; Mazzone, A; Cohen, F; Palafox-Alcantar, G; Fahr, P; Jani, A; Renaldi, R; McCulloch, M and Khosla, R (2022) Overcoming the incumbency and barriers to sustainable cooling. Buildings & Cities, 3(1), pp. 1075-1097. ISSN 2632-6655

Lu, H; Wang, H; Yu, D and Ye, J (2023) Sharp schedule compression in urgent emergency construction projects via activity crashing, substitution and overlapping: A case study of huoshengshan and leishenshan hospital projects in wuhan. Engineering, Construction and Architectural Management, 30(8), pp. 3696-3712. ISSN 0969-9988

Marti, P; Trümpi, S and Heinzmann, D (2009) Hydraulic joint for pipe jacking. Journal of Construction Engineering and Management, 135(6), pp. 439-447. ISSN 0733-9364

Mohseni, Mehdi (2012) Dynamic vulnerability assessment of highway and railway bridges. PhD thesis, University of Nebraska - Lincoln, USA.

Moselhi, O and Roofigari-Esfahan, N (2013) Project schedule compression: A multi-objective methodology. Construction Innovation, 13(4), pp. 374-393. ISSN 1471-4175

Moussourakis, J and Haksever, C (2007) Models for accurate computation of earliest and latest start times and optimal compression in project networks. Journal of Construction Engineering and Management, 133(8), pp. 600-608. ISSN 0733-9364

Moussourakis, J and Haksever, C (2010) Project compression with nonlinear cost functions. Journal of Construction Engineering and Management, 136(2), pp. 251-259. ISSN 0733-9364

Mustapha, K; Alhiyafi, J; Shafi, A and Olatunji, S O (2023) Support vector machines for predicting the compressive response of defected 3D printed polymeric sandwich structures. Journal of Engineering, Design and Technology, 21(3), pp. 819-839. ISSN 1726-0531

Nganpet, N G and Biermann, E (2016) Image compression system for a 3U CubeSat. Journal of Engineering, Design and Technology, 14(3), pp. 446-460.

Niu, Y; Nwagboso, C; Proverbs, D and Olomolaiye, P (2004) Developing supply chain integration in building technologies cluster. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Ofori-Boadu, A N; Abrokwah, R Y; Gbewonyo, S and Fini, E (2018) Effect of swine-waste bio-char on the water absorption characteristics of cement pastes. International Journal of Building Pathology and Adaptation, 36(3), pp. 283-299. ISSN 23984708

Ofori-Boadu, A N; Bryant, D; Bock-Hyeng, C; Assefa, Z; Aryeetey, F; Munkaila, S and Fini, E (2022) Physiochemical characterization of agricultural waste biochars for partial cement replacement. International Journal of Building Pathology and Adaptation, 40(4), pp. 569-586. ISSN 23984708

Ohura, T and Kato, M (1993) Erection and field test of concrete arch bridge applying composite tube. Journal of Construction Engineering and Management, 119(4), pp. 666-680. ISSN 0733-9364

Onitiri, M A and Adedayo, S M (2015) Compressive behaviour of polypropylene filled with iron ore tailings. Journal of Engineering, Design and Technology, 13(2), pp. 198-212.

Pleités Lemus, G R (2020) Wage inequality and policy in the United States unionized construction industry from 1907 to 2012. PhD thesis, University of Utah, USA.

Riad, N I (1990) MODA: An expert system for managing owner-directed acceleration. PhD thesis, Illinois Institute of Technology, USA.

Riad, N I; Arditi, D and Mohammadi, J (1994) Integrated system for managing owner-directed project acceleration. Journal of Construction Engineering and Management, 120(1), pp. 77-95. ISSN 0733-9364

Safikhani, S.; Shafaat, A. and Sartipipour, M. (2026) Automated project rescheduling with preemptive activity splitting for baseline restoration. Journal of Construction Engineering and Management, 152(6): 04026065, ISSN 0733-9364

Saleem, M (2024) Internal damage detection in reinforced concrete member using ultrasonic pulse velocity nondestructive testing. Journal of Construction Engineering and Management, 150(8): 04024084, ISSN 0733-9364

Singh, S; Kulkarni, K; Pandey, R and Singh, H (2012) Buckling analysis of thin rectangular plates with cutouts subjected to partial edge compression using FEM. Journal of Engineering, Design and Technology, 10(1), pp. 128-142. ISSN 1726-0531

Sullivan, S (2007) Construction and behavior of precast bridge deck panel systems. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Thanaraj, D P; Anand, N and Arulraj, P (2019) Experimental investigation of mechanical properties and physical characteristics of concrete under standard fire exposure. Journal of Engineering, Design and Technology, 17(5), pp. 878-903. ISSN 1726-0531

Thomas, J C and Le Van, A (2021) Deflections of pneumatic masts and columns. Architectural Engineering and Design Management, 17(3-4), pp. 299-315. ISSN 1745-2007

Tien, I (2014) Bayesian network methods for modeling and reliability assessment of infrastructure systems. PhD thesis, University of California, Berkeley, USA.

Towill, D R (2003) Construction and the time compression paradigm. Construction Management and Economics, 21(6), pp. 581-591. ISSN 01446193

Ubesingha, Buddhinie (2025) Professionalism and ethics in post-disaster reconstruction projects. PhD thesis, London South Bank University, UK.

Velasco-Aquino, A A; Espuna-Mujica, J A; Perez-Sanchez, J F; Zuñiga-Leal, C; Palacio-Perez, A and Suarez-Dominguez, E J (2021) Compressed earth block reinforced with coconut fibers and stabilized with aloe vera and lime. Journal of Engineering, Design and Technology, 19(3), pp. 795-807. ISSN 1726-0531

Wang, L (2018) Deconstructable systems for sustainable design of steel and composite structures. PhD thesis, Northeastern University, USA.

Williamson, K C (2018) The effect of course time compression on academic performance in construction surveying. International Journal of Construction Education and Research, 14(4), pp. 277-294. ISSN 1557-8771

Wong, M K (2006) A study of capacity predictions for driven piles by dynamic pile testing. PhD thesis, University of Hong Kong, Hong Kong.

Wu, K (2019) Robotic assembly: A generative architectural design strategy through component arrangements in highly-constrained design spaces. PhD thesis, Princeton University, USA.

Wu, S; Xie, H; Zeng, Z; Wang, M; Zhao, H and Liu, Y (2023) Influence of pea-gravel layer on segment ring support performance in shield TBM tunnels: A discrete-continuous coupling simulation and model test. Journal of Construction Engineering and Management, 149(10): 04023097, ISSN 0733-9364

Yuan, L (2006) Biomechanical analysis of the physical loads on the low back and shoulder during drywall installation. ScD thesis, University of Massachusetts Lowell, USA.

van Tonder, P and Low, M S (2021) The effect of CO loading on the properties of normal concrete vs fly ash concrete. Journal of Engineering, Design and Technology, 19(6), pp. 1472-1487. ISSN 1726-0531