Items with Index Term: circular economy

Ababio, B K and Lu, W (2023) Barriers and enablers of circular economy in construction: A multi-system perspective towards the development of a practical framework. Construction Management and Economics, 41(1), pp. 3-21. ISSN 01446193

Ababio, B K; Lu, W and Ghansah, F A (2023) Transitioning from green to circular procurement in developing countries: A conceptual framework for Ghana's construction sector. Building Research & Information, 51(7), pp. 798-815. ISSN 0961-3218

Abad, F; Rameezdeen, R and Chileshe, N (2026) Understanding barriers to circular economy design in mass timber construction: An innovation diffusion theory perspective. Engineering, Construction and Architectural Management, 33(15), pp. 22-46. ISSN 0969-9988

Abadi, M; Huang, J; Yeow, J; Mohandes, S R and Zhang, L (2025) Towards a complex push-to-pull dynamics in circular construction supply chains: A systematic literature review. Engineering, Construction and Architectural Management, 32(2), pp. 912-938. ISSN 0969-9988

Abadi, M; Moore, D R and Sammuneh, M A (2021) A framework of indicators to measure project circularity in construction circular economy. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(2), pp. 54-66. ISSN 17514304

Abadi, M and Sammuneh, M A (2020) Integrating circular economy and constructability research: An initial development of a lifecycle "circularity" assessment framework and indicators. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Abdelshafy, A and Walther, G (2023) Using dynamic-locational material flow analysis to model the development of urban stock. Building Research & Information, 51(1), pp. 5-20. ISSN 0961-3218

Abdul Razak, R.; Alias, A. R.; A.Rahman, R. and Lee, Y. S. (2026) Embedding circular economy in infrastructure through social strategies: PLS SEM approach. Journal of Engineering, Design and Technology, 24(5), pp. 1215-1234. ISSN 1726-0531

Abiodun, O; Abadi, M; Ejohwomu, O and Manu, P (2024) Dimensions of maturity model for institutionalising smart circular construction: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Abruzzini, A and Abrishami, S (2022) Integration of BIM and advanced digital technologies to the end of life decision-making process: A paradigm of future opportunities. Journal of Engineering, Design and Technology, 20(2), pp. 388-413. ISSN 1726-0531

Adabre, M A; Chan, A P C; Darko, A and Hosseini, M R (2023) Facilitating a transition to a circular economy in construction projects: Intermediate theoretical models based on the theory of planned behaviour. Building Research & Information, 51(1), pp. 85-104. ISSN 0961-3218

Agyekum, K and Amudjie, J (2024) Challenges to implementing circular economy: Empirical evidence among built environment firms in Ghana. International Journal of Construction Management, 24(3), pp. 281-297. ISSN 1562-3599

Agyekum, K; Amudjie, J; Pittri, H; Dompey, A M A and Botchway, E A (2024) Prioritizing the principles of circular economy among built environment professionals. Built Environment Project and Asset Management, 14(5), pp. 734-750. ISSN 2044-124X

Ahmad, I; Rezai, A; Khan, A and Chileshe, N (2024) Circular economy adoption practices within the South Australian construction industry: Awareness, challenges and future opportunities. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Ajisomo, T. O.; Saka, A.; Dauda, J. and Osuolale, M. (2025) Investigating circular economy barriers for construction and demolition waste in the construction industry: A Delphi and interpretive structural modelling approach. Construction Innovation, 26(4), pp. 1278-1308. ISSN 1471-4175

Akhimien, N (2022) A framework for incorporating circular economy in the design of energy efficient residential buildings in Nigeria. PhD thesis, Cardiff University, UK.

Akomea-Frimpong, I; Jin, X; Osei Kyei, R; Tetteh, P A; Tumpa, R J; Ofori, J N A and Pariafsai, F (2024) A review of circular economy models and success factors on public-private partnership infrastructure development. Built Environment Project and Asset Management, 14(1), pp. 109-126. ISSN 2044-124X

Al Hosni, I S; Amoudi, O and Callaghan, N (2020) An exploratory study on challenges of circular economy in the built environment in Oman. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(3), pp. 104-113. ISSN 17514304

Al-Qazzaz, I; Osorio-Sandoval, C A; Tokbolat, S and Thermou, G (2025) Integration of building information modeling into building circularity assessment: A systematic review. Built Environment Project and Asset Management, 15(3), pp. 574-593. ISSN 2044-124X

Alaux, N; Kulmer, V; Vogel, J and Passer, A (2025) Preserving buildings: Emission reductions from circular economy strategies in Austria. Buildings & Cities, 6(1), pp. 881-898. ISSN 2632-6655

Alhallaq, M. and Artan, D. (2026) Assessing contractors' circular economy performance: Barriers and system requirements. International Journal of Building Pathology and Adaptation, pp. 1-20. ISSN 2398-4708

Ambekar, S; Roy, D; Hiray, A; Prakash, A and Patyal, V S (2022) Barriers to adoption of reverse logistics: A case of construction, real estate, infrastructure and project (crip) sectors. Engineering, Construction and Architectural Management, 29(7), pp. 2878-2902. ISSN 0969-9988

Amran, M and Onaizi, A (2025) Sustainable admixtures to enhance long-term strength and durability properties of eco-concrete: An innovative use of Saudi agro-industrial by-products. International Journal of Building Pathology and Adaptation, 43(4), pp. 591-613. ISSN 2398-4708

Amudjie, J; Agyekum, K; Adinyira, E; Amos-Abanyie, S and Botchway, E A (2025) Implementing the principles of circular economy in the construction industry: Exploratory and confirmatory factor analyses of strategies. Construction Innovation, 25(3), pp. 761-786. ISSN 1471-4175

Amudjie, J; Agyekum, K; Adinyira, E; Amos-Abanyie, S and Kumah, V M A (2023) Awareness and practice of the principles of circular economy among built environment professionals. Built Environment Project and Asset Management, 13(1), pp. 140-156. ISSN 2044-124X

Anastasiades, K; Michels, S; Van Wuytswinkel, H; Blom, J and Audenaert, A (2022) Barriers for the circular reuse of steel in the Belgian construction sector: an industry-wide perspective. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(4), pp. 142-155. ISSN 17514304

Ancapi, F B (2023) Ex ante analysis of circular built environment policy coherence. Buildings & Cities, 4(1), pp. 575-593. ISSN 2632-6655

Andersen, C E; Kanafani, K; Zimmermann, R K; Rasmussen, F N and Birgisdóttir, H (2020) Comparison of GHG emissions from circular and conventional building components. Buildings & Cities, 1(1), pp. 379-392. ISSN 2632-6655

Andersson, R and Buser, M (2020) On the road to nowhere? The challenges of aligning construction and demolition waste practices with circular economy. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Andersson, R and Buser, M (2022) From waste to resource management? Construction and demolition waste management through the lens of institutional work. Construction Management and Economics, 40(6), pp. 477-496. ISSN 01446193

Antonini, E; Boeri, A and Giglio, F (2022) Classification criteria and markers for biomimetic building envelope within circular economy principles: A critical review. Architectural Engineering and Design Management, 18(4), pp. 387-409. ISSN 1745-2007

Asare, O; Obi, L and Thurairajah, N (2024) Leveraging circular economy applications in the offsite construction sector through artificial intelligence: A scientometric review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Atapattu, A M D S; Hadiwattage, C; Perera, B A K S and Rajaratnam, D (2024) Employing criteria scoring matrix in appraising the economic return of transcending to a circular built environment. Smart and Sustainable Built Environment, 13(2), pp. 267-290. ISSN 2046-6099

Azcarate Aguerre, J F (2023) Facades-as-a-service: A cross-disciplinary model for the (re)development of circular building envelopes. PhD thesis, Delft University of Technology, Netherlands.

Azcarate-Aguerre, J F; Conci, M; Zils, M; Hopkinson, P and Klein, T (2022) Building energy retrofit-as-a-service: A total value of ownership assessment methodology to support whole life-cycle building circularity and decarbonisation. Construction Management and Economics, 40(9), pp. 676-689. ISSN 01446193

Badathuruge, Chamari Pamoshika Jayarathna (2023) Transforming logistics systems towards sustainability and circular economy. PhD thesis, Queensland University of Technology, Australia.

Baienat, S. and Iordanova, I. (2026) Quantifying building adaptability and circular performance through BIM: The adaptation intensity index (AII), circular adaptability performance (CAP), and digital adaptability passport (DAP). Smart and Sustainable Built Environment, pp. 1-22. ISSN 2046-6099

Basyouni, Y. A.; Shokry, H.; Murata, R. and Mahmoud, H. (2026) Novel development of affordable composite eco-cool roof tiles from waste materials: An experimental study. Architectural Engineering and Design Management, 22(3), pp. 900-925. ISSN 1745-2007

Bau, Z (2022) Developing circularity of construction waste in emerging economies: an environmental Kuznets curve approach. PhD thesis, University of Hong Kong, Hong Kong.

Bello, A. O. (2026) Towards achieving circular economy in the Nigerian construction industry: Policymakers perspectives and conceptual framework development. Smart and Sustainable Built Environment, 15(3), pp. 1391-1411. ISSN 2046-6099

Bello, A O; Isa, R B; Oke, A E; Arogundade, S and Lewis, J M O (2026) Circular economy implementation in the construction industry: An examination of the barriers in a developing country. International Journal of Building Pathology and Adaptation, 44(1), pp. 143-162. ISSN 2398-4708

Bello, A O; Isa, R B; Afolabi, O P; Arogundade, S and Khan, A A (2025) Drivers for the implementation of circular economy in the Nigerian aeco industry: A structural equation modelling approach. Journal of Engineering, Design and Technology, 23(3), pp. 953-972. ISSN 1726-0531

Benachio, G L F; Freitas, M D C D and Tavares, S F (2021) Interactions between lean construction principles and circular economy practices for the construction industry. Journal of Construction Engineering and Management, 147(7): 04021068, ISSN 0733-9364

Berglund-Brown, J; Dobie, I; Hewitt, J; De Wolf, C and Ochsendorf, J (2025) Lifetimes of demolished buildings in US and European cities. Buildings & Cities, 6(1), pp. 1099-1116. ISSN 2632-6655

Beurskens, Pieter Robert (2021) The development of an evaluation method to support circular building design. PhD thesis, University of Twente, Netherlands.

Bruun, E P G (2024) Structural scaffold-free cooperative robotic fabrication. PhD thesis, Princeton University, USA.

Buser, M and Andersson, R (2021) Circular building and new business models: What opportunity for the contractors? In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Campos, C R (2023) Simplified Matlab calculation tool for LCA optimization of domestic buildings. PhD thesis, University of Strathclyde, UK.

Carollo, Federica Carla (2023) Circularity in the construction and demolition waste management chain. PhD thesis, Politecnico di Milano, Italy.

Carrière, S; Weigend Rodríguez, R; Pey, P; Pomponi, F and Ramakrishna, S (2020) Circular cities: The case of Singapore. Built Environment Project and Asset Management, 10(4), pp. 491-507. ISSN 2044-124X

Chammout, B and El-Adaway, I H (2025) Circular economy in construction: Decision-making factors and future research avenues. Journal of Construction Engineering and Management, 151(6): 04025059, ISSN 0733-9364

Charef, R (2019) A BIM-based framework to integrate a sustainable end-of-life into the asset lifecycle: towards the circular economy. PhD thesis, Coventry University, UK.

Cheng, B; Huang, J; Guo, Z; Li, J and Chen, H (2023) Towards sustainable construction through better construction and demolition waste management practices: A SWOT analysis of Suzhou, China. International Journal of Construction Management, 23(15), pp. 2614-2624. ISSN 1562-3599

Cho, N (2020) Using industry data to make an impact on construction practices over the project lifecycle. PhD thesis, Arizona State University, USA.

Coenen, T; Visscher, K and Volker, L (2022) Circular economy or circular construction? How circularity is understood by construction practitioners. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Coenen, T B J; Visscher, K and Volker, L (2023) A systemic perspective on transition barriers to a circular infrastructure sector. Construction Management and Economics, 41(1), pp. 22-43. ISSN 01446193

Coenen, T B J; Volker, L and Visscher, K (2021) Introducing circular innovation in the construction industry: The case of the circular viaduct. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Coenen, T B J; Volker, L and Visscher, K (2023) Circular infrastructure in terms of institutional logics. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Cruz Rios, F (2018) Beyond recycling: Design for disassembly, reuse, and circular economy in the built environment. PhD thesis, Arizona State University, USA.

Cruz Rios, F; Grau, D and Bilec, M (2021) Barriers and enablers to circular building design in the US: An empirical study. Journal of Construction Engineering and Management, 147(10): 04021117, ISSN 0733-9364

Dadzoe, F; Addy, M; Duah, D Y A and Adesi, M (2024) Towards a circular economy: A knowledge-attitude gap between demand and supply-side operators on green building construction in Ghana. Smart and Sustainable Built Environment, 13(4), pp. 763-779. ISSN 2046-6099

Dams, B; Maskell, D; Shea, A; Allen, S; Cascione, V and Walker, P (2023) Upscaling bio-based construction: Challenges and opportunities. Building Research & Information, 51(7), pp. 764-782. ISSN 0961-3218

Davila Delgado, J M and Oyedele, L O (2020) BIM data model requirements for asset monitoring and the circular economy. Journal of Engineering, Design and Technology, 18(5), pp. 1269-1285. ISSN 1726-0531

De Silva, W. P. M.; Jayasena, S.; Thennakoon, P. and Perera, B. A. K. S. (2026) Circular economic strategies for maximising the end-of-life value of modular buildings: A Delphi study. Smart and Sustainable Built Environment, 15(3), pp. 1366-1390. ISSN 2046-6099

Ding, L.; Wang, T. and Chan, P. W. (2026) Digital platforms for circular construction: Incumbent supply chain actors' perceptions of emerging intermediaries in the Dutch context. Construction Management and Economics, 44(8), pp. 593-612. ISSN 0144-6193

Doan, D. T.; Albsoul, H.; Shobha, A. R.; GhaffarianHoseini, A. and Ghaffarianhoseini, A. (2026) An integrated challenge-strategy framework for construction waste management in New Zealand: Behavioural and organisational challenges and strategies. Engineering, Construction and Architectural Management, pp. 1-22. ISSN 0969-9988

Dorignon, L; Oswald, D; Kempton, L; Boehme, T; Iyer-Raniga, U; Moore, T and Dalton, T (2024) Investigating residential building materials in a circular economy: An Australian perspective. Journal of Construction Engineering and Management, 150(9): 04024115, ISSN 0733-9364

Ebekozien, A.; Thwala, W. D. and Samsurijan, M. S. (2026) Appraising circular economy business model adoption in construction projects to achieving Sustainable Development Goal 11. International Journal of Building Pathology and Adaptation, 44(3), pp. 685-703. ISSN 2398-4708

Eberhardt, L C M; Birgisdóttir, H and Birkved, M (2019) Life cycle assessment of a Danish office building designed for disassembly. Building Research & Information, 47(6), pp. 666-680. ISSN 0961-3218

Eberhardt, L C M; Birkved, M and Birgisdottir, H (2022) Building design and construction strategies for a circular economy. Architectural Engineering and Design Management, 18(2), pp. 93-113. ISSN 1745-2007

Eikelenboom, M; van Uden, M; Coenen, T B J and Vosman, L (2025) Strategic programmes for circular construction: Lessons from three public clients. Construction Management and Economics, 43(11), pp. 901-921. ISSN 0144-6193

Eissa, R and El-Adaway, I H (2024) Accelerating the circular economy transition: A construction value chain-structured portfolio of strategies and implementation insights. Journal of Construction Engineering and Management, 150(8): 04024077, ISSN 0733-9364

Elghaish, F; Matarneh, S T; Edwards, D J; Pour Rahimian, F; El-Gohary, H and Ejohwomu, O (2022) Applications of industry 4.0 digital technologies towards a construction circular economy: Gap analysis and conceptual framework. Construction Innovation, 22(3), pp. 647-670. ISSN 1471-4175

Esa, Mohd Reza (2018) Moving towards sustainable construction in Malaysia: A holistic model for construction and demolition (c&d) waste management. PhD thesis, University of Queensland, Australia.

Eze, E C; Sofolahan, O; Ugulu, R A and Ameyaw Effah, E E (2025) Bolstering circular economy in construction through digitalisation. Construction Innovation, 25(6), pp. 1774-1796. ISSN 1471-4175

Fernández-Pacheco Sáez, J L; Rasskin-Gutman, I; Martín-Bermúdez, N and Pérez-del-Campo, A (2026) Living knowledge labs: Creating community and inclusive nature-based solutions. Buildings & Cities, 7(1), pp. 58-74. ISSN 2632-6655

Fiorineschi, L; Conti, L; Rossi, G and Rotini, F (2024) Conceptual design of a small production plant for eco-friendly packaging. Journal of Engineering, Design and Technology, 22(4), pp. 1257-1281. ISSN 1726-0531

Flores Lara, J C; El Fadel, M and Khalfan, M M A (2025) Integrating industry 4.0 and circular economy in the UAE construction sector: A policy-aligned framework. Built Environment Project and Asset Management, 15(3), pp. 535-556. ISSN 2044-124X

Gade, R (2022) Achieving sustainable construction through construction & demolition waste minimisation in residential building projects. PhD thesis, Auckland University of Technology, New Zealand.

Gasue, R; Aklashie, S; Dompey, A M A; Agyekum, K and Opoku, D (2026) Implementing materials passports in the construction industry: Empirical evidence from Ghana. International Journal of Building Pathology and Adaptation, 44(1), pp. 15-35. ISSN 2398-4708

Genc, O. (2026) Utilizing advanced language models to identify industrial symbiosis opportunities within the circular economy: Capabilities and challenges. Engineering, Construction and Architectural Management, 33(4), pp. 3076-3099. ISSN 0969-9988

Genc, O (2021) Symbioconstruction: A bibliography-driven dynamic construction industry symbiosis database. Journal of Construction Engineering and Management, 147(8): 04021077, ISSN 0733-9364

Geoghegan, H J; Jensen, F W; Kershaw, T and Codinhoto, R (2022) Innovation realisation for digitalising Dutch small architecture practices: state of the art review. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(4), pp. 176-191. ISSN 17514304

Ghafoor, S.; Kocaturk, T.; Hosseini, M. R.; Weiss, M. and Barnett, M. (2026) Navigating complexity: Systems thinking insights on deploying the pss for circular economy housing. Architectural Engineering and Design Management, 22(1), pp. 1-18. ISSN 1745-2007

Ghafoor, S; Kocatürk, T; Hosseini, M R and Weiss, M (2025) Barriers to the deployment of pss for a circular economy in housing: An institutional theory perspective. Smart and Sustainable Built Environment, 14(7), pp. 2090-2111. ISSN 2046-6099

Gillott, C; Davison, B and Densley Tingley, D (2022) Drivers, barriers and enablers: Construction sector views on vertical extensions. Building Research & Information, 50(8), pp. 909-923. ISSN 0961-3218

Giorgi, Serena (2020) Circular economy and regeneration of building stock: Policy improvements, strategic partnerships and life cycle decision-making tools. PhD thesis, Politecnico di Milano, Italy.

Grafström, J and Rydén, S (2026) A transition probability analysis of material flows in the European aggregates industry. Construction Management and Economics, 44(3), pp. 200-213. ISSN 0144-6193

Graser, Konrad (2023) From invention to innovation: Socio-technical processes in the adoption of digital fabrication to architecture, engineering and construction praxis. PhD thesis, ETH Zürich, Switzerland.

Guerra, Beatriz Chinelato (2021) BIM-based construction waste management and circular economy for resource recovery. PhD thesis, University of Texas at Austin, USA.

Gyadu-Asiedu, Nana Akua Asabea; Aigbavboa, Clinton and Stephen, Seyi (2026) Nature-based solutions and materials promoting net-zero construction in South Africa: Trends and insights from a bibliometric review. Journal of Construction Business and Management, 8(2), pp. 28-42. ISSN 2521-0165

Hadi, A; Cheung, F; Adjei, S and Dulaimi, A (2023) Evaluation of lean off-site construction literature through the lens of industry 4.0 and 5.0. Journal of Construction Engineering and Management, 149(12): 03123007, ISSN 0733-9364

Hamida, M B (2025) Circular and adaptable building transformation: Reconceptualization, practice exploration, framework co‑development and implementation. PhD thesis, Delft University of Technology, Netherlands.

Hamida, M B; Jylhä, T; Remøy, H and Gruis, V (2022) Circular building adaptability and its determinants: a literature review. International Journal of Building Pathology and Adaptation, 41(6), pp. 47-69. ISSN 23984708

Hamida, M B; Remøy, H; Gruis, V and Jylhä, T (2025) Circular building adaptability in adaptive reuse: Multiple case studies in the Netherlands. Journal of Engineering, Design and Technology, 23(1), pp. 161-183. ISSN 1726-0531

Hartmann, A. and van den Berg, M. (2026) Circularity on demand and at the side: Working rule patterns in construction design practices. Construction Management and Economics, 44(8), pp. 639-652. ISSN 0144-6193

Haruna, A.; Likhitruangsilp, V.; Pinich, S. and Ioannou, P. G. (2025) Critical success factors for circular economy implementation toward sustainable construction: An iterative stationary approach. Architectural Engineering and Design Management, 21(6), pp. 1416-1434. ISSN 1745-2007

He, R (2023) Modeling of sustainable materials management systems: Hybrid science-based, data-driven approaches. PhD thesis, Carnegie Mellon University, USA.

Henderson, Z; Morgan, B and Watson, J (2019) Implementing the circular economy in buildings: Processes of sensemaking in design and delivery. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Honsa, J; Versele, A; van de Kerckhove, T and Piccardo, C (2025) Circularity at the neighbourhood scale: Co-creative living lab lessons. Buildings & Cities, 6(1), pp. 800-818. ISSN 2632-6655

Huang, J; Abadi, M and Yeow, J (2022) Exploring dynamics in construction circular supply chains using a systematic literature review: New supply-push and demand-pull perspectives. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Huang, J; Abadi, M and Yeow, J (2023) Policies for the transition to circular construction: A systematic literature review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Huang, J; Abadi, M and Yeow, J (2024) Policy implications for factors of steel reuse in circular construction supply chains: A system thinking perspective. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Ibrahim, I.; Haj-Salem, N.; Ashour, A. G. and Alotaibi, E. B. (2026) Assessment of consumer behaviour towards recycled plastic products: Insights from the UAE. Construction Economics and Building, 26(2), ISSN 2204-9029

Icibaci, L M (2019) Re-use of building products in the Netherlands: The development of a metabolism based assessment approach. PhD thesis, Delft University of Technology, Netherlands.

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Jansen, B (2024) The circular kitchen: Perspectives for design and implementation. PhD thesis, Delft University of Technology, Netherlands.

Jayarathna, H S N M; Perera, B A K S; Atapattu, D and Rodrigo, N (2025) Circular economy and blockchain-integrated road map to improve construction waste management. Construction Innovation, 25(7), pp. 23-49. ISSN 1471-4175

Jayawardana, J; Sandanayake, M; Jayasinghe, J A S C; Kulatunga, A K and Zhang, G K (2025) Life cycle economic and social sustainability aspects of prefabricated construction: A systematic review towards the holistic sustainability. Construction Innovation, 25(7), pp. 98-138. ISSN 1471-4175

Jemal, K. M.; Aibinu, A. and Oraee, M. (2026) Technological enablers of lighting-as-a-service business model for circular lighting: A qualitative study. Smart and Sustainable Built Environment, pp. 1-23. ISSN 2046-6099

Jonker-Hoffrén, P (2023) Policy tensions in demolition: Dutch social housing and circularity. Buildings & Cities, 4(1), pp. 405-421. ISSN 2632-6655

Järvelä, H; Lehto, A; Pirilä, T and Kuittinen, M (2025) Metrics for building component disassembly potential: A practical framework. Buildings & Cities, 6(1), pp. 634-653. ISSN 2632-6655

Kanagaraj, S; Thiyagarajan, H; Vasudevan, A and Moghul, M (2022) Road map for implementing circular construction practices in India: an overview. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(4), pp. 166-175. ISSN 17514304

Kanninen, V; Ryöppy, S; Lähtinen, K and Toppinen, A (2024) Actor perceptions and network characteristics around climate-wise housing and construction in Finland. Building Research & Information, 52(8), pp. 941-956. ISSN 0961-3218

Kapogiannis, G; Palaios, P and Sawhney, A (2024) Digital construction led growth asymmetries in Europe: The need for collaborative culture. Construction Economics and Building, 24(1-2), pp. 50-76. ISSN 2204-9029

Karlovsek, J; Meath, C; Miles-Mwangangi, L; MacDonald, C and Brockmann, A (2024) Implementing circular economy principles in infrastructure procurement to support circular supply chains. Engineering, Construction and Architectural Management, 31(11), pp. 4645-4658. ISSN 0969-9988

Kedir, F; Hall, D M; Brantvall, S; Lessing, J; Hollberg, A and Soman, R K (2024) Circular information flows in industrialized housing construction: The case of a multi-family housing product platform in Sweden. Construction Innovation, 24(5), pp. 1354-1379. ISSN 1471-4175

Khatib, J; Jahami, A; El Kordi, A; Sonebi, M; Malek, Z; Elchamaa, R and Dakkour, S (2023) Effect of municipal solid waste incineration bottom ash (MSWI-BA) on the structural performance of reinforced concrete (RC) beams. Journal of Engineering, Design and Technology, 21(3), pp. 862-882. ISSN 1726-0531

Kio, P N and Anumba, C (2024) Circularity: a workflow for reusing waste wind turbine blades. Built Environment Project and Asset Management, 14(5), pp. 751-764. ISSN 2044-124X

Kismet, B and Colakoglu, M B (2026) Developing a building-scale circularity indicator through fuzzy analytical hierarchy process and gini index-based circularity calculation methods. International Journal of Construction Management, 26(6), pp. 994-1016. ISSN 1562-3599

Koc, K; Durdyev, S; Tleuken, A; Ekmekcioglu, O; Mbachu, J and Karaca, F (2024) Critical success factors for construction industry transition to circular economy: Developing countries' perspectives. Engineering, Construction and Architectural Management, 31(12), pp. 4955-4974. ISSN 0969-9988

Koc, K; Ekmekcioglu, Ö and Işlk, Z (2023) Developing a hybrid fuzzy decision-making model for sustainable circular contractor selection. Journal of Construction Engineering and Management, 149(10): 04023095, ISSN 0733-9364

Koch, C; Pedersen, T A and Fredslund, L (2024) Platforms of second-hand building material: A hub in the circular economy or fantasies of entrepreneurs? In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Koch-Ørvad, N and Thuesen, C (2016) Sustainable building in scandinavia: Directions of innovations for supporting the transition. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Kwasafo, O K; Adinyira, E and Agyekum, K (2024) Impact of green construction procurement practices on the success of circular economy in Ghana. Built Environment Project and Asset Management, 14(5), pp. 765-781. ISSN 2044-124X

Lamptey, T; De-Graft, O-M; Acheampong, A; Adesi, M and Ghansah, F A (2021) A framework for the adoption of green business models in the Ghanaian construction industry. Smart and Sustainable Built Environment, 10(3), pp. 536-553. ISSN 2046-6099

Lei, Haoran (2024) Life cycle assessment in circular economy for built environment. PhD thesis, RMIT University, Australia.

Li, K; Salleh, H B; Wang, R and Yang, Y (2025) How do different policy instruments influence circular economy implementation in the construction sector? Building Research & Information, 53(3), pp. 359-374. ISSN 0961-3218

Li, Liancheng (2025) Towards sustainable recovery of waste plastics with the Australian construction industry: Transition scenarios and environmental impact evaluation. PhD thesis, University of Adelaide, Australia.

Liaros, S (2020) Implementing a new human settlement theory: Strategic planning for a network of regenerative villages. Smart and Sustainable Built Environment, 9(3), pp. 258-271. ISSN 2046-6099

Liaros, S (2022) A network of circular economy villages: Design guidelines for 21st century garden cities. Built Environment Project and Asset Management, 12(3), pp. 349-364. ISSN 2044-124X

Liu, J; Jiang, M; Wang, Z; Lu, M; Wang, L and Zhang, X (2025) A business model canvas for construction waste resource use under dual carbon targets. International Journal of Construction Management, 25(13), pp. 1570-1582. ISSN 1562-3599

Liu, X (2025) From circular to sustainable: The implementation of circular economy in transport infrastructure projects in China and the Netherlands. PhD thesis, Delft University of Technology, Netherlands.

Liu, Z (2024) Bridging circularity and inclusion: Rethinking municipal solid waste infrastructure for sustainable urban transitions. PhD thesis, Delft University of Technology, Netherlands.

Lovrenčić Butković, L; Mihić, M and Sigmund, Z (2023) Assessment methods for evaluating circular economy projects in construction: A review of available tools. International Journal of Construction Management, 23(5), pp. 877-886. ISSN 1562-3599

Lucas, A N and Löschke, S K (2025) Towards circular renovation: A comparative review of circular economy integration in sustainable building rating systems. Building Research & Information, 53(3), pp. 375-396. ISSN 0961-3218

Lundgren, R.; Kyrö, R.; Toivonen, S. and Tähtinen, L. (2025) Reimagining circularity: Actions for optimising the use of existing buildings. Buildings & Cities, 6(1), pp. 674-694. ISSN 2632-6655

Lundgren, R (2023) Social life cycle assessment of adaptive reuse. Buildings & Cities, 4(1), pp. 334-351. ISSN 2632-6655

Lundgren, R; Kyrö, R and Olander, S (2024) The lifecycle impact and value capture of circular business models in the built environment. Construction Management and Economics, 42(6), pp. 527-544. ISSN 01446193

Machline, E; Pearlmutter, D; Cohen, C and Schwartz, M (2023) COVID-19: A catalyst for revitalizing mixed-use urban centers? The case of Paris. Building Research & Information, 51(1), pp. 39-55. ISSN 0961-3218

Mahinkanda, M; Ochoa, J J; Chileshe, N; Rameezdeen, R and Gu, N (2025) Optimizing design decisions for construction waste minimization through an interpretive structural modelling approach. Built Environment Project and Asset Management, 15(5), pp. 1036-1054. ISSN 2044-124X

Mani, S.; Karunasena, G.; Hosseini, M. R. and Hasan, A. (2026) Building circularity performance model: A weighted multi-level assessment framework aligned with ISO standards. Smart and Sustainable Built Environment, ISSN 2046-6099

Mayara Regina, M and Tavares, S F (2021) Materials passport's review: Challenges and opportunities toward a circular economy building sector. Built Environment Project and Asset Management, 11(4), pp. 767-782. ISSN 2044-124X

Mayer, M (2020) Material recovery certification for construction workers. Buildings & Cities, 1(1), pp. 550-564. ISSN 2632-6655

Meglin, R (2022) Economic and environmental assessment of a regional construction and building materials industry in Switzerland: An applied combination of material-flow analysis, life-cycle assessment and input-output analysis. DSc thesis, ETH Zürich, Switzerland.

Mehran Mahmoudi, M; Seyed Hossein Hosseini, N and Rahimi, F (2024) Integrating complete disassembly planning with deconstructability assessment to facilitate designing deconstructable buildings. Architectural Engineering and Design Management, 20(1), pp. 150-167. ISSN 1745-2007

Mhlanga, J; Haupt, T C and Loggia, C (2024) Shaping circular economy in the built environment in Africa. A bibliometric analysis. Journal of Engineering, Design and Technology, 22(2), pp. 613-642. ISSN 1726-0531

Mirzaie, S (2022) Influence of BREEAM, BIM, and Soft Landings on lifecycle performance of two non-domestic buildings. PhD thesis, Heriot-Watt University, UK.

Moghayedi, A. and Awuzie, B. (2026) Unlocking sustainability futures: A framework for digital product passports and material banks in a circular built environment. Construction Innovation, 26(9), pp. 135-166. ISSN 1471-4175

Mohamed Sultan, A A B (2019) Decision tools for recycling with a focus on fibre reinforced composites. PhD thesis, University of Manchester, UK.

Monteiro, Nathalie Barbosa Reis (2021) Life cycle management: Foundations for the application of circular economy in concrete industries of civil construction. PhD thesis, Universidade Federal do Piauí, Brazil.

Morrison, S; Callaghan, N; Tong, M and Thomson, C (2022) Quantity surveyors incorporating circularity at early project design stage: A literature review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Munaro, M R; Freitas, M D C D; Tavares, S F and Bragança, L (2021) Circular business models: Current state and framework to achieve sustainable buildings. Journal of Construction Engineering and Management, 147(12): 04021164, ISSN 0733-9364

Munaro, M R and Tavares, S F (2025) Design for adaptability and disassembly: Guidelines for building deconstruction. Construction Innovation, 25(2), pp. 665-687. ISSN 1471-4175

Murali, D.; Suresh, M. and Raman, R. (2026) Breaking down to build up: How deconstruction and carbon finance foster sustainable, resilient construction in the industry 5.0 era. Construction Innovation, 26(4), pp. 1006-1033. ISSN 1471-4175

Narayana Naidelage, Chamari Pushpamali (2021) The role of reverse logistics on supply chain performance. PhD thesis, Queensland University of Technology, Australia.

Ness, D (2022) Towards sufficiency and solidarity: COP27 implications for construction and property. Buildings & Cities, 3(1), pp. 912-919. ISSN 2632-6655

Nguyen, T. T.; Do, S. T. and Nguyen, V. T. (2025) Investigating cause-effect relationships among barriers to circular economy adoption in construction: A case study in Vietnam. Construction Innovation, 26(5), pp. 1556-1581. ISSN 1471-4175

Nguyen, V. T. and Khuc, T. Q. (2026) How structural modelling of R-principles reveals their interactions and guides circular economy implementation in Vietnam. Engineering, Construction and Architectural Management, pp. 1-30. ISSN 0969-9988

Nie, P; Dahanayake, K C and Sumanarathna, N (2024) Exploring uae's transition towards circular economy through construction and demolition waste management in the pre-construction stage–a case study approach. Smart and Sustainable Built Environment, 13(2), pp. 246-266. ISSN 2046-6099

Niveditha, M. and Palanisamy, T. (2026) Upcycling iron-rich industrial waste into a carbon-sequestering composite binder through optimized carbonation curing for structural applications. International Journal of Construction Management, 26(8), pp. 1471-1489. ISSN 1562-3599

Obi, L; Arif, M; Daniel, E I; Oladinrin, O T and Goulding, J S (2023) Establishing underpinning concepts for integrating circular economy and offsite construction: A bibliometric review. Built Environment Project and Asset Management, 13(1), pp. 123-139. ISSN 2044-124X

Ogunmakinde, O E (2019) Developing a circular-economy-based construction waste minimisation framework for Nigeria. PhD thesis, University of Newcastle, Australia.

Ogunmakinde, O E (2025) Achieving zero waste: Circular economy strategies in Australian higher education. Construction Economics and Building, 25(2), pp. 1-23. ISSN 2204-9029

Oke, A E; Akintola, O A; Oluwatobiloba, O M; Aliu, J and Omoyajowo, N I (2025) Study on the awareness and practice of circular economy principles among construction stakeholders in Nigeria. Construction Economics and Building, 25(2), pp. 24-42. ISSN 2204-9029

Omotayo, T S; Awuzie, B and Lovelin, O (2023) Synergising continuous improvement with circular economy for advancing innovation in the construction sector: A text mining approach. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Onturk, K; Firat, S; Yilmaz, G and Khatib, J (2022) Waste utilization to enhance performance of road subbase fill. Journal of Engineering, Design and Technology, 20(2), pp. 455-474. ISSN 1726-0531

Ortlepp, R; Gruhler, K and Schiller, G (2016) Material stocks in Germany's non-domestic buildings: A new quantification method. Building Research & Information, 44(8), pp. 840-862. ISSN 0961-3218

Ortlepp, R; Gruhler, K and Schiller, G (2018) Materials in Germany's domestic building stock: Calculation model and uncertainties. Building Research & Information, 46(2), pp. 164-178. ISSN 0961-3218

Osaily, Y (2021) Guidance for advancing demolition project management in the UK. PhD thesis, University of Bath, UK.

Osaily, Y; Copping, A; McCann, S and Uddin, T (2019) Exploring the value of demolition contractor involvement at the design stage of construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Osei-Tutu, S; Ayarkwa, J; Nani, G; Osei-Asibey, D and Abu, I M A (2025) Stakeholders' role towards circular economy implementation: A scientometric review. Construction Innovation, 25(6), pp. 1633-1656. ISSN 1471-4175

Otasowie, O.; Aigbavboa, C.; Oke, A. and Adekunle, P. (2026) Redefining key activities in construction organisations: Towards the adoption of circular economy business model. International Journal of Construction Management, 26(8), pp. 1428-1441. ISSN 1562-3599

Otasowie, O. K.; Aigbavboa, C. O.; Oke, A. E. and Adekunle, P. (2026) Channels as a determinant in circular economy business model for construction organisations. Journal of Engineering, Design and Technology, 24(1), pp. 105-123. ISSN 1726-0531

Otasowie, O. K.; Aigbavboa, C. O.; Oke, A. E.; Aghimien, D. and Adekunle, P. (2026) Closing the loop with construction clients: Relationship strategies for circular economy business model adoption. Journal of Engineering, Design and Technology, 24(5), pp. 1195-1214. ISSN 1726-0531

Otasowie, O K; Clinton, C; Oke, A E and Adekunle, P (2025) Mapping out focus for circular economy business models (cebms) research in construction sector studies: A bibliometric approach. Journal of Engineering, Design and Technology, 23(5), pp. 1404-1422. ISSN 1726-0531

Pelé-Peltier, A; Charef, R and Morel, J C (2023) Factors affecting the use of earth material in mainstream construction: A critical review. Building Research & Information, 51(2), pp. 119-137. ISSN 0961-3218

Petrescu, D; Petcou, C and Baibarac, C (2016) Co-producing commons-based resilience: Lessons from R-Urban. Building Research & Information, 44(7), pp. 717-736. ISSN 0961-3218

Pittri, H; Agyekum, K; Botchway, E A; Alencastro, J; Oladinrin, O T and Dompey, A M A (2024) Drivers for design for deconstruction (DfD) implementation among design professionals. Smart and Sustainable Built Environment, 13(5), pp. 1134-1154. ISSN 2046-6099

Prasittisopin, L. (2026) Power plant waste (fly ash, bottom ash, biomass ash) management for promoting circular economy in sustainable construction: Emerging economy context. Smart and Sustainable Built Environment, 15(3), pp. 1341-1365. ISSN 2046-6099

Ramos, M A P (2023) Determining factors and strategies to promote construction and demolition waste management on a local scale. PhD thesis, Universidade NOVA de Lisboa, Portugal.

Rathnayake, I; Ochoa, J J; Gu, N; Rameezdeen, R; Statsenko, L and Sandhu, S (2024) Building the future: Fostering circularity through the new dawn of sharing economy practices in the construction industry. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Rathnayake, I; Ochoa, J J; Gu, N; Rameezdeen, R; Statsenko, L and Sandhu, S (2025) Facilitating circularity through sharing economy practices in the construction industry: Potential shareable resources. Construction Innovation, 25(7), pp. 292-330. ISSN 1471-4175

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Exploring the barriers for implementing waste trading practices in the construction industry in Australia. Built Environment Project and Asset Management, 11(4), pp. 559-576. ISSN 2044-124X

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Investigation of waste diversion rates in the construction and demolition sector in Australia. Built Environment Project and Asset Management, 11(3), pp. 427-439. ISSN 2044-124X

Rizzi, Dario (2025) Tools for sustainable design strategies: Optimization of integrated BIM-blockchain technologies and protocols for the application of minimum environmental criteria. PhD thesis, Università degli Studi di Ferrara, Italy.

Rodrigo, N; Omrany, H; Chang, R and Zuo, J (2024) Leveraging digital technologies for circular economy in construction industry: A way forward. Smart and Sustainable Built Environment, 13(1), pp. 85-116. ISSN 2046-6099

Rodrigues, M and Franco, M (2023) The role of citizens and transformation of energy, water, and waste infrastructure for an intelligent, sustainable environment in cities. Smart and Sustainable Built Environment, 12(2), pp. 385-406. ISSN 2046-6099

Sadiq, M and Khalfan, M M A (2025) Transitioning to a circular economy in the construction demolition industry: A bibliometric analysis. Built Environment Project and Asset Management, 15(3), pp. 518-534. ISSN 2044-124X

Saeed, F; Mostafa, K; Rauch, C and Hegazy, T (2023) Environmental impact and cost assessment for reusing waste during end-of-life activities on building projects. Journal of Construction Engineering and Management, 149(10): 04023099, ISSN 0733-9364

Sahebzamani, E and Forcada, N (2026) Enhancing sustainable construction decisions: Integrating BIM and VR for circular economy assessment. Building Research & Information, 54(1), pp. 79-99. ISSN 0961-3218

Salmio, E and Huuhka, S (2026) Environmental impacts of reclaimed bricks: Comparing different deconstruction methods. Buildings & Cities, 7(1), pp. 323-340. ISSN 2632-6655

Sanchez, B and Haas, C (2018) Capital project planning for a circular economy. Construction Management and Economics, 36(6), pp. 303-312. ISSN 01446193

Saradara, S M; Lara, J C F; Swarnakar, V; Rauf, A; Qureshi, R; Fadel, M E and Khalfan, M M A (2024) Construction and demolition waste management in the United Arab Emirates through the 3R principle. Engineering, Construction and Architectural Management, 31(13), pp. 430-454. ISSN 0969-9988

Selman, A D and Gade, A N (2020) Barriers of incorporating circular economy in building design in a Danish context. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Selman, A D; Guðjónsdóttir, S and Gade, A N (2021) Is the Danish construction sector ready for sustainable and circular construction sites? In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Selvam, G.; Kamalanandhini, M.; Velpandian, M.; Hariharan, R.; Mohanakrishna, S. and Thirumurugan, V. (2026) Integrated statutory waste management framework for the sustainable built environment. Engineering, Construction and Architectural Management, 33(5), pp. 4078-4097. ISSN 0969-9988

Shafiee, S; Piroozfar, P; Forberg, L F; Hansen, H N and Farr, E (2025) Enhancing efficiency and sustainability in construction: a product configurator for customizable off-site building solutions. Architectural Engineering and Design Management, 21(3), pp. 450-466. ISSN 1745-2007

Shooshtarian, S; Caldera, S; Maqsood, T; Ryley, T and Khalfan, M (2022) An investigation into challenges and opportunities in the Australian construction and demolition waste management system. Engineering, Construction and Architectural Management, 29(10), pp. 4313-4330. ISSN 0969-9988

Shooshtarian, S; Hosseini, M R; Kocaturk, T; Arnel, T and T. Garofano, N (2023) Circular economy in the Australian AEC industry: Investigation of barriers and enablers. Building Research & Information, 51(1), pp. 56-68. ISSN 0961-3218

Shooshtarian, S; Maqsood, T; Wong, P S P; Caldera, S; Ryley, T; Zaman, A and Cáceres Ruiz, A M (2024) Circular economy in action: The application of products with recycled content in construction projects: a multiple case study approach. Smart and Sustainable Built Environment, 13(2), pp. 370-394. ISSN 2046-6099

Small-Warner, K (2022) Adopting sustainable business models in small island developing states (SIDS): buildings and construction sector. PhD thesis, De Montfort University, UK.

Smitha, J S and Thomas, A (2021) Integrated model and index for circular economy in the built-environment in the Indian context. Construction Economics and Building, 21(3), pp. 198-220. ISSN 2204-9029

Sohani, H; Seyed Hossein Hosseini, N and Saghatforoush, E (2024) The optimized form of building made from the reused elements. Architectural Engineering and Design Management, 20(2), pp. 191-213. ISSN 1745-2007

Sospeter, N. G.; Awuzie, B. O. and Ngowi, A. (2026) Restoring labour dignity: Analysing decent work improvement strategies in tanzania's circular construction supply chains. Built Environment Project and Asset Management, 16(3), pp. 578-596. ISSN 2044-124X

Soto, C; Thomson, C S and Uti Nchor, J (2024) Realizing the potential for circularity in Glasgow through the socio-spatial dimension of urban systems. Building Research & Information, 52(8), pp. 957-983. ISSN 0961-3218

Susilowati, F; Abadi, M and Wang, Y (2024) Developing a conceptual framework for 'designing out waste' in construction circular economy: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Talla, A and McIlwaine, S (2024) Industry 4.0 and the circular economy: Using design-stage digital technology to reduce construction waste. Smart and Sustainable Built Environment, 13(1), pp. 179-198. ISSN 2046-6099

Tam, V W Y; Fung, I W H; Jorge Evangelista, A C J and Wong, S W L (2025) Assistant robotic machine for Hong Kong construction industry. International Journal of Construction Management, 25(14), pp. 1749-1754. ISSN 1562-3599

Tennakoon, T M M P; Chileshe, N; Rameezdeen, R; Ochoa, J J and Samaraweera, A (2026) Enhancing supply chain resilience in offsite construction through the procurement strategy: A systematic literature review. Construction Innovation, 26(1), pp. 63-82. ISSN 1471-4175

Tetteh, P A; Osei-Kyei, R and Tam, V W Y (2025) Strategies for sustainable financing of circular infrastructure projects: A systematic review. Construction Innovation, 25(7), pp. 235-267. ISSN 1471-4175

Tighnavard Balasbaneh, A and Ramadan, B S (2026) Integrating three pillars of sustainability for evaluating the modular construction building. Construction Innovation, 26(2), pp. 328-352. ISSN 1471-4175

Tighnavard Balasbaneh, A.; Sher, W. and Ashour, A. (2026) Combining the circular economy and bio-based materials for alternative waste wood applications for the construction industry. Engineering, Construction and Architectural Management, 33(5), pp. 4257-4277. ISSN 0969-9988

Tikam, H. and Kothari, C. (2026) Policy instruments for effective construction and demolition waste management. Engineering, Construction and Architectural Management, pp. 1-34. ISSN 0969-9988

Tirado Fabian, D R (2022) Contribution to the development of a model for the analysis of stocks and flows of waste materials from buildings at a territorial scale. DSc thesis, ETH Zürich, Switzerland.

Tummers-Mueller, L C (2017) Learning from co-housing initiatives: Between Passivhaus engineers and active inhabitants. PhD thesis, Delft University of Technology, Netherlands.

Vahidi, A (2025) Towards circular concrete: The implementation of circular concrete in the construction industry. PhD thesis, Delft University of Technology, Netherlands.

Valizadeh, M.; Azizi, M.; Hosseini, M. R. and Mahoor, P. (2026) A hybrid analysis of reverse logistics barriers in Iranian construction. Smart and Sustainable Built Environment, 15(3), pp. 1225-1254. ISSN 2046-6099

Van Den Berg, M; Hulsbeek, L and Voordijk, H (2023) Decision-support for selecting demolition waste management strategies. Buildings & Cities, 4(1), pp. 883-901. ISSN 2632-6655

Van Uden, M; Wamelink, H; Van Bueren, E and Heurkens, E (2025) Circular building hubs as intermediate step for the transition towards a circular economy. Construction Management and Economics, 43(6), pp. 446-464. ISSN 0144-6193

Venu Jaya, S.; Swarnakar, V.; Acquaye, A.; Khalfan, M. and El Fadel, M. (2026) Unlocking 3r-driven value engineering potential in sustainable construction: An empirical analysis of drivers, challenges, benefits, tools and techniques. Journal of Engineering, Design and Technology, 24(6), ISSN 1726-0531

Victar, H C and Waidyasekara, K G A S (2026) Circular economy strategies for minimising construction waste in Sri Lanka: Focus on the preconstruction stage. Construction Innovation, 26(3), pp. 814-842. ISSN 1471-4175

Victar, H C and Waidyasekara, A S (2025) Optimising construction waste management in Sri Lanka through Circular economy strategies: A focus on construction and renovation and use and operate stages. Engineering, Construction and Architectural Management, 32(7), pp. 4275-4309. ISSN 0969-9988

Vijaya Prasad, B; Paul Daniel, A P; Anand, N and Yadav, S K (2022) Strength and microstructure behaviour of high calcium fly ash based sustainable geo polymer concrete. Journal of Engineering, Design and Technology, 20(2), pp. 436-454. ISSN 1726-0531

Vijayenthiran, V.; Perera, B. A. K. S. and Kavirathna, A. S. (2026) Convergence of 3D printing with circular economy to improve the construction sustainability. Smart and Sustainable Built Environment, 15(3), pp. 1026-1046. ISSN 2046-6099

Vorobjev, O.; Uotila, U.; Joensuu, T. and Saari, A. (2026) Design for disassembly: A review of public policy proposals. Buildings & Cities, 7(1), pp. 775-790. ISSN 2632-6655

Vosman, L; Coenen, T B J; Volker, L and Visscher, K (2021) Exploring the innovation ecosystem concept for a construction industry in transition. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Wanaguru, K; Mallawaarachchi, H and Vijerathne, D (2025) Prisma-based review and development of a circularity assessment framework for building construction material selection. Built Environment Project and Asset Management, 15(3), pp. 557-573. ISSN 2044-124X

Wang, Z; Zhou, Y; Wang, T and Zhao, N (2025) Efficiency of construction waste and carbon reduction in the construction industry: Based on improved three stage sbm-DEA model in China. Engineering, Construction and Architectural Management, 32(8), pp. 5328-5349. ISSN 0969-9988

Wang, Ze (2025) Advancing circular construction in sydney: Integrating system dynamics, evolutionary game theory, and robust optimization for construction and demolition waste management. PhD thesis, University of Sydney, Australia.

Weigend Rodríguez, R; Pomponi, F; Webster, K and D'Amico, B (2020) The future of the circular economy and the circular economy of the future. Built Environment Project and Asset Management, 10(4), pp. 529-546. ISSN 2044-124X

Westerholm, N.; Tuure, A.; Pajunen, S. and Kuittinen, M. (2026) Comparing technical disassembly potential methods for concrete and timber buildings. Buildings & Cities, 7(1), pp. 633-652. ISSN 2632-6655

Wijewansha, A S; Tennakoon, G A; Waidyasekara, K and Ekanayake, B J (2021) Implementation of circular economy principles during pre-construction stage: The case of Sri Lanka. Built Environment Project and Asset Management, 11(4), pp. 750-766. ISSN 2044-124X

Windapo, A O and Moghayedi, A (2020) Adoption of smart technologies and circular economy performance of buildings. Built Environment Project and Asset Management, 10(4), pp. 585-601. ISSN 2044-124X

Wu, D.; Wang, T.; Chan, P. and Gruis, V. (2026) Integration of circular economy principles into Dutch social housing procurement: Technological, organizational and environmental practices, challenges and development potentials. Smart and Sustainable Built Environment, pp. 1-21. ISSN 2046-6099

Wuni, I Y (2023) Drivers of circular economy adoption in the construction industry: A systematic review and conceptual model. Building Research & Information, 51(7), pp. 816-833. ISSN 0961-3218

Wuni, I Y and Abankwa, D A (2025) Understanding the key risks in circular construction projects: from systematic review to conceptual framework. Construction Innovation, 25(4), pp. 1085-1107. ISSN 1471-4175

Yadav, H; Soni, U and Kumar, G (2023) Analysing challenges to smart waste management for a sustainable circular economy in developing countries: A fuzzy DEMATEL study. Smart and Sustainable Built Environment, 12(2), pp. 361-384. ISSN 2046-6099

Yu, Yifei (2024) Circular construction ecosystems: Designing a circularity information platform for the built environment. PhD thesis, University of Twente, Netherlands.

Zandee, D; Zutshi, A; Creed, A and Nijhof, A (2024) Aiming for bullseye: A novel gameplan for circular economy in the construction industry. Engineering, Construction and Architectural Management, 31(2), pp. 593-617. ISSN 0969-9988

Zatta, E and Condotta, M (2023) Assessing the sustainability of architectural reclamation processes: An evaluation procedure for the early design phase. Building Research & Information, 51(1), pp. 21-38. ISSN 0961-3218

Zhang, J.; Saberian, M.; Roychand, R.; Li, J.; Li, C. Q.; Zhang, G. and Robert, D. (2026) Carbon footprint reduction in concrete using spent coffee grounds biochar: A life cycle perspective. International Journal of Construction Management, 26(10), pp. 2137-2153. ISSN 1562-3599

Zhang, S; Zhang, S; Zhao, Z; Liu, H; Wang, C; Wang, X and Yan, L (2026) BIM and semantic web-based circular design system for sustainable construction management of hydropower engineering. Journal of Construction Engineering and Management, 152(3): 04026002, ISSN 0733-9364

Zhang, C; He, K; Zhang, W; Jin, T and Ao, Y (2025) Game evolution analysis of BIM application willingness of prefabricated construction parties. Engineering, Construction and Architectural Management, 32(5), pp. 3132-3165. ISSN 0969-9988

Zuluaga Mayorga, S (2024) Exploring the value of infrastructure systems and its impacts on decision-making for sustainability. PhD thesis, University of Toronto, Canada.

Zuofa, T; Ochieng, E G and Ode-Ichakpa, I (2023) An evaluation of determinants influencing the adoption of circular economy principles in Nigerian construction SMEs. Building Research & Information, 51(1), pp. 69-84. ISSN 0961-3218

de Feijter, F J (2023) Trust in circular design: Active stakeholder participation in Chinese and Dutch housing retrofit projects. Building Research & Information, 51(1), pp. 105-118. ISSN 0961-3218

van Stijn, A (2023) Developing circular building components: Between ideal and feasible. PhD thesis, Delft University of Technology, Netherlands.

van Stijn, A and Gruis, V (2020) Towards a circular built environment: An integral design tool for circular building components. Smart and Sustainable Built Environment, 9(4), pp. 635-653. ISSN 2046-6099

van Uden, M; Wamelink, H; van Bueren, E and Heurkens, E (2025) Aligning practices towards a circular economy in the architecture, engineering, and construction sector: Seven transitions in different stages of reconfiguration. Construction Management and Economics, 43(2), pp. 153-174. ISSN 0144-6193

van Uden, M F M (2025) Reconfiguration of practices towards a circular economy in the architecture, engineering, and construction sector: Change throughout a persistent system. PhD thesis, Delft University of Technology, Netherlands.

van den Berg, M; Voordijk, H and Adriaanse, A (2020) Information processing for end-of-life coordination: a multiple-case study. Construction Innovation, 20(4), pp. 647-671. ISSN 1471-4175

van den Berg, M; Voordijk, H and Adriaanse, A (2021) BIM uses for deconstruction: An activity-theoretical perspective on reorganising end-of-life practices. Construction Management and Economics, 39(4), pp. 323-339. ISSN 01446193

van den Berg, Marc Casper (2019) Managing circular building projects. PhD thesis, University of Twente, Netherlands.

Çetin, Sultan (2023) Towards a circular building industry through digitalisation: Exploring how digital technologies can help narrow, slow, close, and regenerate the loops in social housing practice. PhD thesis, Delft University of Technology, Netherlands.

Öberg, V; Jockwer, R; Goto, Y and Al-Emrani, M (2025) Design for structural adaptation: Economic feasibility of an implementation for Swedish timber buildings. Building Research & Information, 53(6), pp. 759-776. ISSN 0961-3218