Items with Index Term: building material

Abdulla, H S (2016) An investigation on the causes and remedial measures on the delays in the construction industry in the Kingdom of Bahrain. PhD thesis, Glasgow Caledonian University, UK.

Adetooto, J; Windapo, A and Pomponi, F (2024) The use of alternative building technologies as a sustainable affordable housing solution: Perspectives from South Africa. Journal of Engineering, Design and Technology, 22(5), pp. 1447-1463. ISSN 1726-0531

Adetooto, J; Windapo, A; Pomponi, F; Companie, F; Alade, K and Mtya, A (2024) Strategies to promote the acceptance of sandbag building technology for sustainable and affordable housing delivery: The South African case. Journal of Engineering, Design and Technology, 22(5), pp. 1505-1522. ISSN 1726-0531

Afolabi, A O; Oluwatayo, A; Oyeyipo, O; Ojelabi, R and Fagbenle, O (2018) Assessment of designers' perception of post conflict housing schemes for internally displaced persons. Construction Economics and Building, 18(1), pp. 27-47. ISSN 2204-9029

Agapiou, A; Clausen, L E; Flanagan, R; Norman, G and Notman, D (1998) The role of logistics in the materials flow control process. Construction Management and Economics, 16(2), pp. 131-137. ISSN 01446193

Agapiou, A; Flanagan, R; Norman, G and Notman, D (1998) The changing role of builders merchants in the construction supply chain. Construction Management and Economics, 16(3), pp. 351-361. ISSN 01446193

Agustí-Juan, I (2018) Sustainability assessment and development of guidelines for digital fabrication in construction. DSc thesis, ETH Zürich, Switzerland.

Agyekum, K; Adinyira, E and Oppon, J A (2022) Factors limiting the adoption of hemp as an alternative sustainable material for green building delivery in Ghana. International Journal of Building Pathology and Adaptation, 40(2), pp. 202-218. ISSN 23984708

Ahmad, A G B (1994) Conservation of British colonial buildings built between 1800 and 1930 in Malaysia. PhD thesis, University of Sheffield, UK.

Ahmed, S and Arocho, I (2022) Implementing a choosing-by-advantages decision-making method to evaluate the critical success factors of mass-timber building materials in the US. Journal of Construction Engineering and Management, 148(10): 05022010, ISSN 0733-9364

Akadiri, O P (2011) Development of a multi-criteria approach for the selection of sustainable materials for building projects. PhD thesis, University of Wolverhampton, UK.

Akhimien, N (2022) A framework for incorporating circular economy in the design of energy efficient residential buildings in Nigeria. PhD thesis, Cardiff University, UK.

Akintoye, A (1995) Just-in-time application and implementation for building material management. Construction Management and Economics, 13(2), pp. 105-113. ISSN 01446193

Al-Atesh, E A; Rahmawati, Y; Zawawi, N A W A and Utomo, C (2023) A decision-making model for supporting selection of green building materials. International Journal of Construction Management, 23(5), pp. 922-933. ISSN 1562-3599

Al-Fahad, J Y (2012) Reform of building codes, regulations, administration and enforcement in Kuwait: within the legal, administrative, technical & social framework. PhD thesis, Loughborough University, UK.

Al-Gahtani, K; Alsulaihi, I; Ali, M and Marzouk, M (2017) Production of green concrete using recycled waste aggregate and byproducts. Built Environment Project and Asset Management, 7(4), pp. 413-425. ISSN 2044-124X

AlKheder, S; AlKandari, D and AlYatama, S (2022) Sustainable assessment criteria for airport runway material selection: A fuzzy analytical hierarchy approach. Engineering, Construction and Architectural Management, 29(8), pp. 3091-3113. ISSN 0969-9988

Alade, K; Oyebade, A and Nzewi, N (2018) Assessment of the use of locally available materials for building construction in Ado-Ekiti, Nigeria. Journal of Construction Business and Management, 2(2), pp. 36-41. ISSN 2521-0165

Alhusban, A A; Alhusban, S A and Alhusban, M A (2022) How the COVID 19 pandemic would change the future of architectural design. Journal of Engineering, Design and Technology, 20(1), pp. 339-357. ISSN 1726-0531

Ali, I; Peng, C; Ullah, H; Deng, J; Bibi, A and Mahar, W A (2025) Multi-objective optimization of insulation materials for building energy and comfort improvements in hot and arid regions. Building Research & Information, 53(6), pp. 797-816. ISSN 0961-3218

Alkasisbeh, M R (2018) An integrated decision support framework for life-cycle building asset management. PhD thesis, Western Michigan University, USA.

Alshihre, F (2018) Development of a framework for client satisfaction in the Saudi construction industry. PhD thesis, University of Wolverhampton, UK.

Altamimi, M (2024) BIM adoption in local-based architecture and engineering SMEs : Developing an application-based method to pinpoint objective BIM uses and align them with business standards to facilitate the execution of BIM projects in prospective architecture and engineering SMEs. PhD thesis, University of Pécs, Hungary.

Alvi, M I A (1990) The low-income housing production process in Lahore, Pakistan. PhD thesis, City of Birmingham Polytechnic, UK.

Alzohbi, M G M (2015) A framework for evaluating material management performance in Jordanian concrete building projects. PhD thesis, Sheffield Hallam University, UK.

Amankwaa, E F; Roberts, B M; Mensah, P and Gough, K V (2025) Impact of roofing materials on school temperatures in tropical Africa. Buildings & Cities, 6(1), pp. 139-157. ISSN 2632-6655

Ammar, M (2016) Aerial construction: Robotic fabrication of tensile structures with flying machines. DSc thesis, ETH Zürich, Switzerland.

Amran, M (2025) Innovative technology for converting automobile tire waste bead wires into recycled steel fibers for sustainable concrete composites: Insights for the Al-Kharj Governorate construction industry. International Journal of Building Pathology and Adaptation, 43(4), pp. 665-692. ISSN 2398-4708

Anagnostou, G (2008) Quality in the apartment building industry a case study in Greece. PhD thesis, University College London, UK.

Antonini, E; Boeri, A and Giglio, F (2022) Classification criteria and markers for biomimetic building envelope within circular economy principles: A critical review. Architectural Engineering and Design Management, 18(4), pp. 387-409. ISSN 1745-2007

Arbabian, H (1998) Changes in building construction in an earthquake country. PhD thesis, University of Manchester, UK.

Arneson, E (2018) Construction capacity: How regional construction supply chains respond to disruptions. PhD thesis, University of Colorado at Boulder, USA.

Arpaci, E Y G; Akbulut, D E and Yildiz, O (2024) Enhancing water resistance of earthen buildings by using admixture materials. Architectural Engineering and Design Management, 20(2), pp. 320-336. ISSN 1745-2007

Astrand, R N (2003) Selection model to choose innovative building systems for progressive housing with special reference to metro Manila, Philippines. PhD thesis, McGill University, Canada.

Ayman Anwar, R (2022) Enhancing the integration of sustainability assessment within dynamic BIM enabled design projects. PhD thesis, Northumbria University, UK.

Bagheri, M; Roth, L; Siebke, L; Rohde, C and Linke, H J (2024) Implementing housing policies for a sufficient lifestyle. Buildings & Cities, 5(1), pp. 300-315. ISSN 2632-6655

Bahammou, Y; Kouhila, M; Moussaoui, H; Lamsyehe, H; Tagnamas, Z; Lamharrar, A and Idlimam, A (2022) Evaluation of the influence of ambient air temperature and air velocity on mortar cement durability using a forced convection solar dryer. International Journal of Building Pathology and Adaptation, 40(4), pp. 462-480. ISSN 23984708

Bapat, H; Sarkar, D and Gujar, R (2021) Selection of sustainable materials for energy savings of infrastructure-transportation project in ahmedabad, India using BIM and FCM. Journal of Construction in Developing Countries, 26(2), pp. 135-161. ISSN 1823-6499

Barbosa, Adriano Aurelio Ribeiro (2014) Implementing a sound power method for testing noise on masonry saw. PhD thesis, Universidade Estadual de Campinas, Brazil.

Bayrak, T (2008) Semi automatic construction progress measurement using a combination of CAD modelling, photogrammetry and construction knowledge. PhD thesis, Heriot-Watt University, UK.

Ben-Alon, L (2020) Natural buildings: Integrating earthen building materials and methods into mainstream construction. PhD thesis, Carnegie Mellon University, USA.

Benachio, G L F; Freitas, M D C D and Tavares, S F (2021) Interactions between lean construction principles and circular economy practices for the construction industry. Journal of Construction Engineering and Management, 147(7): 04021068, ISSN 0733-9364

Benster, N A (1970) A study and assessment of water penetration and rapid deterioration in existing dwellings-developed as a guide to future building design, production and maintenance management. PhD thesis, University of Manchester Institute of Science and Technology, UK.

Bergsdal, H; Brattebø, H; Bohne, R A and Müller, D B (2007) Dynamic material flow analysis for norway's dwelling stock. Building Research & Information, 35(5), pp. 557-570. ISSN 0961-3218

Bergsdal, H; Brattebø, H and Müller, D B (2014) Dynamic material flow analysis for PCBs in the Norwegian building stock. Building Research & Information, 42(3), pp. 359-370. ISSN 0961-3218

Blong, R (2004) Residential building damage and natural perils: Australian examples and issues. Building Research & Information, 32(5), pp. 379-390. ISSN 0961-3218

Bowers, C T (2019) The next generation of residential construction: Adoption of green building programs, environmentally certified wood products and the transparency of environmental friendliness. PhD thesis, University of Washington, USA.

Bradley, R A; Gohnert, M and Bulovic, I (2018) Construction considerations for low-cost earth brick shells. Journal of Construction in Developing Countries, 23(1), pp. 43-60. ISSN 1823-6499

Braz, João Carlos Rocha (2014) Technical and economic evaluation of structural systems to eight floors residential buildings. PhD thesis, Universidade Estadual de Campinas, Brazil.

Broer, S (2012) Solutions to climate change in UK housing developments: a lifestyle approach. EngD thesis, University College London, UK.

Burke, R D (2018) Early design decisions in building materials for higher performing buildings. PhD thesis, Arizona State University, USA.

Burke, R D; Parrish, K and El Asmar, M (2018) Environmental product declarations: Use in the architectural and engineering design process to support sustainable construction. Journal of Construction Engineering and Management, 144(5): 04018026, ISSN 0733-9364

Bügl, R; Leimgruber, C; Hüni, G R and Scholz, R W (2009) Sustainable property funds: Financial stakeholders' views on sustainability criteria and market acceptance. Building Research & Information, 37(3), pp. 246-263. ISSN 0961-3218

Campion, N A (2015) Advancing life cycle assessment: Perspectives from the building and healthcare industries. PhD thesis, University of Pittsburgh, USA.

Carter, Nanette (2014) Do it yourself: The making of the modern home in post-war Australia. PhD thesis, University of Melbourne, Australia.

Castriotto, Caio Magalhães (2023) Reciprocal link a new connection system for reciprocal frame structures developed by algorithmic modeling and digital fabrication. PhD thesis, Universidade Estadual de Campinas, Brazil.

Cha, C (2024) New insights on the roman brick industry: The production and distribution of ceramic building material in central Italy (ca. 50 bce-300 CE). PhD thesis, Florida State University, USA.

Chang, Y; Wilkinson, S; Seville, E and Potangaroa, R (2012) Changes in resource need for post-disaster reconstruction: A longitudinal study in China. Building Research & Information, 40(3), pp. 327-336. ISSN 0961-3218

Chen, Z; Li, T; Qin, L and Jiang, Y (2025) Vision-guided autonomous block loading in a dual-robot collaborative handling framework. Journal of Construction Engineering and Management, 151(5): 04025035, ISSN 0733-9364

Chileshe, N; Rameezdeen, R; Lehmann, S and Hosseini, M r (2014) Reverse logistics (RL) implementation among contractors in Australia: Practices and barriers. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Cho, C-S; Mazze, C E; Dika, S L and Gehrig, G B (2015) Enhancing construction education: Implementing habitat for humanity projects as service-learning for construction materials. International Journal of Construction Education and Research, 11(1), pp. 4-20. ISSN 1557-8771

Chowdhooree, I and Das, K K (2022) Indigenous knowledge of mud architecture: Experiences of surviving against multiple natural hazards. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 451-469. ISSN 1759-5916

Chro, A H R (2018) Sustainable renovation of residential buildings in subtropical climate zone. PhD thesis, University of Pécs, Hungary.

Cockerill, J E (1993) The construction industry in belfast 1800-1914. PhD thesis, Queen's University Belfast, UK.

Craig, N; Pilcher, N; Forster, A M and Kennedy, C (2023) Ethanol-driven building fungus colonisation: "Whisky black" in urban built environments. International Journal of Building Pathology and Adaptation, 41(1), pp. 238-257. ISSN 23984708

Crawley, D and Aho, I (1999) Building environmental assessment methods: Applications and development trends. Building Research & Information, 27(4-5), pp. 300-308. ISSN 0961-3218

Crippa, J; Araujo, A M F; Bem, D; Ugaya, C M L and Scheer, S (2020) A systematic review of BIM usage for life cycle impact assessment. Built Environment Project and Asset Management, 10(4), pp. 603-618. ISSN 2044-124X

Cripps, A (2004) Cardboard as a construction material: A case study. Building Research & Information, 32(3), pp. 207-219. ISSN 0961-3218

Cruz Rios, F (2018) Beyond recycling: Design for disassembly, reuse, and circular economy in the built environment. PhD thesis, Arizona State University, USA.

Da Rocha, C G; Wijayaratna, K; Jong, K and Haller, D (2023) Examining off-site construction from a flow viewpoint. Journal of Construction Engineering and Management, 149(3): 05023001, ISSN 0733-9364

Dafeamekpor, C A; Adjei-Kumi, T; Nani, G; Kissi, E and Tengan, C (2023) Determinants for assessing self-help housing affordability in Ghana's housing sector: A Delphi approach. International Journal of Construction Management, 23(11), pp. 1815-1827. ISSN 1562-3599

Danso, H; Martinson, B; Ali, M and Mant, C (2015) Performance characteristics of enhanced soil blocks: A quantitative review. Building Research & Information, 43(2), pp. 253-262. ISSN 0961-3218

Danso, H; Obeng-Ahenkora, N K and Manu, D (2021) Prices trend of selected building and construction materials on Ghanaian construction market: 2011–2016. International Journal of Construction Management, 21(3), pp. 284-291. ISSN 1562-3599

Dawood, I (2010) Decision support system (DSS) model to facilitate strategic planning of the housing industry in the developing world. PhD thesis, University of Salford, UK.

De Toldi, T and Pestre, T (2023) The relevance of cut-stone to strategies for low-carbon buildings. Buildings & Cities, 4(1), pp. 229-257. ISSN 2632-6655

Din, Z U and Bernold, L E (2017) Experimental study of signal behavior for wireless communication in construction. Construction Innovation, 17(4), pp. 475-491. ISSN 1471-4175

Ding, G K C (2010) Sustainability assessment of residential development: An Australian experience. International Journal of Construction Management, 10(2), pp. 19-32. ISSN 1562-3599

Dixit, M K (2017) Embodied energy and cost of building materials: Correlation analysis. Building Research & Information, 45(5), pp. 508-523. ISSN 0961-3218

Duyne Barenstein, J E (2015) Continuity and change in housing and settlement patterns in post-earthquake Gujarat, India. International Journal of Disaster Resilience in the Built Environment, 6(2), pp. 140-155. ISSN 1759-5916

Eberhardt, L C M; Birgisdóttir, H and Birkved, M (2019) Life cycle assessment of a Danish office building designed for disassembly. Building Research & Information, 47(6), pp. 666-680. ISSN 0961-3218

Edike, U E; Ameh, O J; Adenuga, O A and Akintunde, O P (2024) Life cycle energy analysis of houses incorporating conventional and alternative masonry units. Architectural Engineering and Design Management, 20(5), pp. 1079-1099. ISSN 1745-2007

El-Kholy, A M and Akal, A Y (2021) Determining the stationary financial cause of contracting firms failure. International Journal of Construction Management, 21(8), pp. 818-833. ISSN 1562-3599

El-khawas, I N (1997) The optimal design of buildings: A life-cycle approach to energy efficiency. PhD thesis, Ohio State University, USA.

Elkhayat, Y.; Moran, P.; Barrett, S.; Barry, P. and Goggins, J. (2026) Developing a methodology with a tool for calculating and reducing the upfront carbon emissions of buildings: Ireland as a case study. Architectural Engineering and Design Management, 22(1), pp. 168-187. ISSN 1745-2007

Emmer, M J (2009) A decision process model for closing the structural steel materials loop in construction. PhD thesis, University of Florida, USA.

Enshassi, A; Kumaraswamy, M and Jomah, A N (2010) Significant factors causing time and cost overruns in construction projects in the Gaza Strip: Contractors' perspective. International Journal of Construction Management, 10(1), pp. 35-60. ISSN 1562-3599

Estep, G D (2015) Perceptions of wood product supply and demand for affordable building and green construction markets. PhD thesis, West Virginia University, USA.

Eufrasio Espinosa, R M (2015) A visio-spatial life cycle energy model of building materials within a bioregional context: Mapping the embodied energy of fired clay bricks in Cuitzeo, Mexico. PhD thesis, University of Sheffield, UK.

Fasakin, J O and Ogunsemi, D R (2003) Modelling the selling prices of residential buildings in Nigeria. Journal of Financial Management of Property and Construction, 8(2), pp. 111-114. ISSN 1366-4387

Fawzy, O N (1991) The development of the architectural working drawing from the descriptive to the prescriptive: A study in architectural communication. PhD thesis, University of Pennsylvania, USA.

Feng, H; Kassem, M; Greenwood, D and Doukari, O (2023) Whole building life cycle assessment at the design stage: A bim-based framework using environmental product declaration. International Journal of Building Pathology and Adaptation, 41(1), pp. 109-142. ISSN 23984708

Filho, A J (1995) Technological change and informal housebuilding in Brazil. PhD thesis, University College London, UK.

Flanagan, R; Norman, G and Worrall, H (1995) Trade performance of the UK building materials and components industries. Engineering, Construction and Architectural Management, 2(2), pp. 141-162. ISSN 0969-9988

Flood, C and Scott, L (2020) Thermal analysis and post construction verification. International Journal of Building Pathology and Adaptation, 38(1), pp. 51-67. ISSN 23984708

Forbes, C (2018) Rebuilding Nepal: Traditional and modern approaches, building or diminishing resilience? International Journal of Disaster Resilience in the Built Environment, 9(3), pp. 218-229. ISSN 1759-5916

Freitas, J A; Sanquetta, C R; Iwakiri, S and de Mello Maron da Costa, M D R (2021) The use of wood construction materials as a way of carbon storage in residential buildings in Brazil. International Journal of Construction Management, 21(3), pp. 292-298. ISSN 1562-3599

Galbraith, G H; Guo, J S and McLean, R C (2000) The effect of temperature on the moisture permeability of building materials. Building Research & Information, 28(4), pp. 245-259. ISSN 0961-3218

Galbraith, G H; McLean, R C; Gillespie, I; Guo, J and Kelly, D (1998) Nonisothermal moisture diffusion in porous building materials. Building Research & Information, 26(6), pp. 330-339. ISSN 0961-3218

Galbraith, G H; McLean, R C and Guo, J S (1998) Moisture permeability data presented as a mathematical relationship. Building Research & Information, 26(3), pp. 157-168. ISSN 0961-3218

Gama, E C M and Sloan, S C W B (2010) Environmental sustainability in the construction industry in developing countries: A study of embodied energy of low-cost housing. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Ganesan, S and Kelsey, J (2006) Technology transfer: International collaboration in Sri Lanka. Construction Management and Economics, 24(7), pp. 743-753. ISSN 1466433X

Gavilan, R M and Bernold, L E (1994) Source evaluation of solid waste in building construction. Journal of Construction Engineering and Management, 120(3), pp. 536-552. ISSN 0733-9364

Ghanbari Parsa, A R (1989) The interaction of planning policies and construction technologies in Iran with reference to China & Japan. PhD thesis, University of Newcastle upon Tyne, UK.

Gibney, A (1998) Studies in eighteenth-century building history. PhD thesis, Trinity College Dublin, Ireland.

Giesekam, J; Barrett, J R and Taylor, P (2016) Construction sector views on low carbon building materials. Building Research & Information, 44(4), pp. 423-444. ISSN 0961-3218

Giesekam, J J (2016) The contribution to UK climate mitigation targets from reducing embodied carbon in the construction sector. PhD thesis, University of Leeds, UK.

Gines, J A (2024) Mass timber utilization in architecture: Carbon sequestration, building materials and construction practices. PhD thesis, Mississippi State University, USA.

Gokarakonda, S; Shrestha, S; Caleb, P R; Rathi, V; Jain, R; Thomas, S; Topp, K and Niazi, Z (2019) Decoupling in India's building construction sector: Trends, technologies and policies. Building Research & Information, 47(1), pp. 91-107. ISSN 0961-3218

Gong, X (2019) Vertical integration and reputation: the case of real estate companies. PhD thesis, University of Hong Kong, Hong Kong.

Goodarzi, F; Palaniappan, K; Pillay, M and Ershadi, M (2025) A scoping review of indoor air quality assessment in refurbished buildings. Smart and Sustainable Built Environment, 14(1), pp. 93-118. ISSN 2046-6099

Gottlieb, S C; Koch, C; Frederiksen, N and Vogelius, P (2020) Governing the common good: Collective action in institutional maintenance. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Gough, K (1992) From bamboo to bricks: Self-help housing and the building materials industry in urban Colombia. PhD thesis, University of London, University College London, UK.

Göswein, V; Arehart, J; Phan-Huy, C; Pomponi, F and Habert, G (2022) Barriers and opportunities of fast-growing biobased material use in buildings. Buildings & Cities, 3(1), pp. 745-755. ISSN 2632-6655

Haghighi, Z (2022) Architectural photovoltaic application. PhD thesis, Delft University of Technology, Netherlands.

Haik, R; Peled, A and Meir, I A (2021) Thermal performance of alternative binders lime hemp concrete (lhc) building: Comparison with conventional building materials. Building Research & Information, 49(7), pp. 763-776. ISSN 0961-3218

Hailemariam, E K; Hailemariam, L M; Amede, E A and Nuramo, D A (2023) Identification of barriers, benefits and opportunities of using bamboo materials for structural purposes. Engineering, Construction and Architectural Management, 30(7), pp. 2716-2738. ISSN 0969-9988

Hall, N L (1988) The history and potential of thatching. PhD thesis, Open University, UK.

Hatayama, H and Tahara, K (2016) Using decomposition analysis to forecast metal usage in the building stock. Building Research & Information, 44(1), pp. 63-72. ISSN 0961-3218

Holtström, J; Kenlind, S S and Nord, T (2024) Project-based business models in the construction industry: key success factors for sustainable timber extension projects. Construction Management and Economics, 42(7), pp. 656-669. ISSN 01446193

Horne, M; Hill, R and Giddings, R (1999) Visualization of photovoltaic clad buildings. Building Research & Information, 27(2), pp. 96-108. ISSN 0961-3218

Hou, L; Tan, Y; Luo, W; Xu, S; Mao, C and Moon, S (2022) Towards a more extensive application of off-site construction: A technological review. International Journal of Construction Management, 22(11), pp. 2154-2165. ISSN 1562-3599

Huang, Q; Chen, Y; Li, Y; Liu, S; Fan, Z; Chen, X and Chen, J (2026) Maco: An open-image data set with multiannotation strategies for building material counting. Journal of Construction Engineering and Management, 152(4): 04026008, ISSN 0733-9364

Höök, M; Stehn, L and Brege, S (2015) The development of a portfolio of business models: A longitudinal case study of a building material company. Construction Management and Economics, 33(5-6), pp. 334-348. ISSN 01446193

Isah, A D; Muhammad, I B and Katun, I (2018) Optimizing architects’ building materials’ specification strategy through knowledge management principles. Construction Innovation, 18(4), pp. 394-411. ISSN 1471-4175

Isiadianso, C (2007) Integrating deconstruction into the project delivery process. PhD thesis, Loughborough University, UK.

Islam, M H; Safayet, M A and Al Mamun, A (2024) Building performance analysis for optimizing the energy consumption of an educational building. International Journal of Building Pathology and Adaptation, 42(4), pp. 576-595. ISSN 23984708

Islam, M Z (2018) Resourcing for post-disaster housing reconstruction: the case of Cyclones Sidr and Aila in Bangladesh. PhD thesis, London South Bank University, UK.

Islam, R; Chowdhury, S; Jannat, N and Paul, P (2022) Carbon footprint evaluation of local dwellings in Bangladesh towards low carbon society. Built Environment Project and Asset Management, 12(3), pp. 433-446. ISSN 2044-124X

Ismail, F Z; Halog, A and Smith, C (2017) How sustainable is disaster resilience? An overview of sustainable construction approach in post-disaster housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 8(5), pp. 555-572. ISSN 1759-5916

Jagboro, G O (1998) The effect of payment for advance purchase of building materials on contractor's cash-flow projections. Journal of Financial Management of Property and Construction, 3(3), pp. 71-83. ISSN 1366-4387

Jaskot, P B (1993) The architectural policy of the SS, 1936-1945. PhD thesis, Northwestern University, USA.

Jiang, X; Zhou, H; Li, M; Lu, K; Lyu, S; Omrani, S and Skitmore, M (2024) Sustainable construction projects management in the AEC industry: Analysis and visualization. International Journal of Construction Management, 24(4), pp. 384-399. ISSN 1562-3599

Jones, W; Gibb, A; Goodier, C and Bust, P (2015) Managing the unknown: The health risks of nanomaterials in the built environment. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Joseph Oladiran, O and Rogers Simeon, D (2023) Consciousness and prospects of autoclaved aerated concrete (aac) blocks for wall construction: Comparative study Nigeria and South Africa. Journal of Construction Business and Management, 6(2), pp. 1-10. ISSN 2521-0165

Junnila, S (2004) The environmental impact of an office building throughout its life cycle. PhD thesis, Helsinki University of Technology, Finland.

Järvelä, H; Lehto, A; Pirilä, T and Kuittinen, M (2025) Metrics for building component disassembly potential: A practical framework. Buildings & Cities, 6(1), pp. 634-653. ISSN 2632-6655

K'Akumu, O A (2010) The enabling environment for artisanal dimension stone in Nairobi, Kenya. PhD thesis, University of Westminster, UK.

Kabo, F W (2006) Low-cost housing design and provision: A case study of Kenya. PhD thesis, University of Michigan, USA.

Kakitahi, J M (2014) Causality, magnitude and impact mitigation of rework in Uganda. PhD thesis, Lund University, Sweden.

Kakitahi, J M; Landin, A and Alinaitwe, H M (2013) An exploratory study of rework causality in Uganda. Construction Innovation, 13(3), pp. 266-280. ISSN 1471-4175

Kar, S (2021) Developing a decision support system for effective material management in construction. PhD thesis, Indian Institute of Technology Delhi, India.

Kar, S and Jha, K N (2022) Assessing criticality of construction materials for prioritizing their procurement using ANP-TOPSIS. International Journal of Construction Management, 22(10), pp. 1852-1862. ISSN 1562-3599

Kar, S; Kothari, C and Jha, K N (2021) Developing an optimum material procurement schedule by integrating construction program and budget using NSGA-II. Journal of Construction Engineering and Management, 147(4): 04021017, ISSN 0733-9364

Kavishe, N and An, M (2016) Challenges for implementing public private partnership in housing projects in dar es salaam city, Tanzania. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Kavishe, N; Chileshe, N and Jefferson, I (2019) Public-private partnerships in Tanzanian affordable housing schemes: Policy and regulatory issues, pitfalls and solutions. Built Environment Project and Asset Management, 9(2), pp. 233-247. ISSN 2044-124X

Keath, M (1983) The development of school construction systems in Hertfordshire 1946-64. PhD thesis, University of Greenwich, UK.

Kifokeris, D and Koch, C (2019) Blockchain in building logistics: Emerging knowledge, and related actors in Sweden. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Kikwasi, G and Mbuya, E (2019) Vulnerability analysis of building structures to floods: The case of flooding informal settlements in Dar es Salaam, Tanzania. International Journal of Building Pathology and Adaptation, 37(5), pp. 629-656. ISSN 23984708

Kim, A (2024) A comprehensive approach to industrial decarbonization efforts within the building materials sector. PhD thesis, University of California, Davis, USA.

Kim, S (1998) Sustainable building practices: minimising the life-cycle environmental impact of high-rise apartments in Korea. PhD thesis, University of Edinburgh, UK.

Kleemann, F; Lederer, J; Aschenbrenner, P; Rechberger, H and Fellner, J (2016) A method for determining buildings' material composition prior to demolition. Building Research & Information, 44(1), pp. 51-62. ISSN 0961-3218

Koch, C; Pedersen, T A and Fredslund, L (2024) Platforms of second-hand building material: A hub in the circular economy or fantasies of entrepreneurs? In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Koch, C and Urup, L (2017) Project performance: An emerging constellation of multiple institutions. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Kongela, S M (2023) Sustainability potential awareness among built environment stakeholders: Experience from Tanzania. International Journal of Building Pathology and Adaptation, 41(2), pp. 301-319. ISSN 23984708

Kono, J (2018) Improving the sustainability performance of building materials: An approach from life cycle thinking. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Kouhila, M; Bahammou, Y; Lamsyehe, H; Tagnamas, Z; Moussaoui, H; Idlimam, A and Lamharrar, A (2024) Evaluating water sorption isotherms, drying kinetics and exergy performance of traditionally earth mortar drying system based on hybrid solar-electrical dryer. International Journal of Building Pathology and Adaptation, 42(5), pp. 857-880. ISSN 2398-4708

Kristensen, E K (2011) Systemic barriers to a future transformation of the building industry from a buyer controlled to a seller driven industry: an analysis of key systemic variables in the building industry, such as 'procurement model', 'buyer perception', 'production mode' and 'leadership and management', principally in a Danish development context and seen from the perspective of the architect. PhD thesis, Robert Gordon University, UK.

Kulshreshtha, Y (2022) Building affordable, durable and desirable earthen houses: Construction with materials derived from locally available natural and biological resources. PhD thesis, Delft University of Technology, Netherlands.

Laguarda Mallo, M F (2017) Critical factors in the willingness to adopt innovative woodbased building materials in the construction industry: The case of CLT. PhD thesis, University of Minnesota, USA.

Li, Y and Chen, J (2022) Computer vision-based counting model for dense steel pipe on construction sites. Journal of Construction Engineering and Management, 148(1): 04021178, ISSN 0733-9364

Lihakanga, R (2022) Generic wireless sensor network for dynamic monitoring of a new generation of building material. PhD thesis, Heriot-Watt University, UK.

Lisø, K R; Hygen, H O; Kvande, T and Thue, J V (2006) Decay potential in wood structures using climate data. Building Research & Information, 34(6), pp. 546-551. ISSN 0961-3218

Liu, J; Jiang, M; Wang, Z; Lu, M; Wang, L and Zhang, X (2025) A business model canvas for construction waste resource use under dual carbon targets. International Journal of Construction Management, 25(13), pp. 1570-1582. ISSN 1562-3599

Lounsbury, C R (1983) From craft to industry: The building process in North Carolina in the nineteenth century. PhD thesis, George Washington University, USA.

Love, P; Edwards, D J; Standing, C and Irani, Z (2009) Beyond the Red Queen syndrome: CRM technology and building material suppliers. Engineering, Construction and Architectural Management, 16(5), pp. 459-474. ISSN 0969-9988

Lowe, J G (1987) Monopoly and the materials supply industries of the UK. Construction Management and Economics, 5(1), pp. 57-71. ISSN 01446193

Macdonald, S and Arato Goncalves, A P (2020) Concrete conservation: Outstanding challenges and potential ways forward. International Journal of Building Pathology and Adaptation, 38(4), pp. 607-618. ISSN 23984708

Mahamivanan, H; Ghassemi, N; Tayarani Darbandy, M; Shoeibi, A; Hussain, S; Nasirzadeh, F; Alizadehsani, R; Nahavandi, D; Khosravi, A and Nahavandi, S (2025) Material recognition for construction quality monitoring using deep learning methods. Construction Innovation, 25(3), pp. 732-760. ISSN 1471-4175

Malin, N (2000) The cost of green materials. Building Research & Information, 28(5-6), pp. 408-412. ISSN 0961-3218

Marcellus-Zamora, K A (2015) An evaluation of material stocks and flows found during construction and demolition activities in the Philadelphia region of the United States. PhD thesis, Drexel University, USA.

Marcos, Micheline Helen Cot (2015) Method of obtaining environmental impact data, during the design development process through use of BIM tool. PhD thesis, Universidade de São Paulo, Brazil.

Marzouk, M and Amin, A (2013) Predicting construction materials prices using fuzzy logic and neural networks. Journal of Construction Engineering and Management, 139(9), pp. 1190-1198. ISSN 0733-9364

Marzouk, M and Ashmawy, M M (2021) Assessment of highways concrete and asphalt pavements using superiority inferiority ranking technique. Construction Innovation, 21(2), pp. 259-278. ISSN 1471-4175

Marzouk, M; ElSharkawy, M; Elsayed, P and Eissa, A (2020) Resolving deterioration of heritage building elements using an expert system. International Journal of Building Pathology and Adaptation, 38(5), pp. 721-735. ISSN 23984708

Mastrucci, A and Rao, N D (2019) Bridging India's housing gap: Lowering costs and CO2 emissions. Building Research & Information, 47(1), pp. 8-23. ISSN 0961-3218

Mayara Regina, M and Tavares, S F (2021) Materials passport's review: Challenges and opportunities toward a circular economy building sector. Built Environment Project and Asset Management, 11(4), pp. 767-782. ISSN 2044-124X

McCormack, M; Treloar, G J; Palmowski, L and Crawford, R (2007) Modelling direct and indirect water requirements of construction. Building Research & Information, 35(2), pp. 156-162. ISSN 0961-3218

Meglin, R (2022) Economic and environmental assessment of a regional construction and building materials industry in Switzerland: An applied combination of material-flow analysis, life-cycle assessment and input-output analysis. DSc thesis, ETH Zürich, Switzerland.

Mensah, S; Ameyaw, C; Abaitey, B A and Yeboah, H O (2022) Optimizing stabilization of laterite as walling unit. Journal of Engineering, Design and Technology, 20(6), pp. 1482-1498. ISSN 1726-0531

Mikhailitchenko, Serguei (2008) The Australian housing market: Price dynamics and capital stock growth. PhD thesis, Griffith University, Australia.

Milani, B (2005) Building materials in a green economy: Community-based strategies for dematerialization. PhD thesis, University of Toronto, Canada.

Ming, C S; Runeson, G and Skitmore, M (1996) Changes in profit as market conditions change: An historical study of a building firm. Construction Management and Economics, 14(3), pp. 253-264. ISSN 01446193

Misztal, G (2004) Refurbishment urgency indicators of residential buildings. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Modak, J P; Sohoni, V V and Aware, H V (1997) Manually powered manufacture of keyed bricks. Building Research & Information, 25(6), pp. 354-364. ISSN 0961-3218

Mogaji, I J; Mewomo, M C and Bondinuba, F K (2024) Assessment of barriers to the adoption of innovative building materials (IBM) for sustainable construction in the Nigerian construction industry. Engineering, Construction and Architectural Management, 32(13), pp. 1-26. ISSN 0969-9988

Mohamadi, Y; Celik, T and Celik, T (2024) Optimising building envelope and insulation materials for energy efficiency and life-cycle cost in Cypriot residences. Architectural Engineering and Design Management, 20(5), pp. 1060-1078. ISSN 1745-2007

Mpakati-Gama, E C; Brown, A and Sloan, B (2016) Embodied energy and carbon analysis of urban residential buildings in Malawi. International Journal of Construction Management, 16(1), pp. 1-12. ISSN 1562-3599

Myrvang, R and Liu, C Y A (2025) Beyond traditional methods: Enhancing cost escalation forecasting in commercial construction amid economic turbulence. Journal of Construction Engineering and Management, 151(2): 04024201, ISSN 0733-9364

Na, R (2013) Property rights analysis of building material pricing. PhD thesis, University of Hong Kong, Hong Kong.

Najjar, M K; Figueiredo, K; Evangelista, A C J; Hammad, A W A; Tam, V W Y and Haddad, A (2022) Life cycle assessment methodology integrated with BIM as a decision-making tool at early-stages of building design. International Journal of Construction Management, 22(4), pp. 541-555. ISSN 1562-3599

Ndlangamandla, M G and Combrinck, C (2020) Environmental sustainability of construction practices in informal settlements. Smart and Sustainable Built Environment, 9(4), pp. 523-538. ISSN 2046-6099

Neya, I; Yamegueu, D; Messan, A; Coulibaly, Y; Ouedraogo, A L S N and Ayite, Y M X D (2025) Effect of cement and geopolymer stabilization on the thermal comfort: Case study of an earthen building in Burkina Faso. International Journal of Building Pathology and Adaptation, 43(3), pp. 283-301. ISSN 2398-4708

Ngoy, Kabemba Steve; Daweti, Esona; Molise, Relebohile; Chinasamy, Darmarajan and Windapo, Abimbola (2026) Evaluation of sustainable building technologies adoption in housing construction across socio-economic contexts in Cape Town, South Africa. Journal of Construction Business and Management, 8(S1), pp. 140-154. ISSN 2521-0165

Nichols, S (2021) Opération béton: Constructing concrete in Switzerland. DSc thesis, ETH Zürich, Switzerland.

Nie, P; Dahanayake, K C and Sumanarathna, N (2024) Exploring uae's transition towards circular economy through construction and demolition waste management in the pre-construction stage–a case study approach. Smart and Sustainable Built Environment, 13(2), pp. 246-266. ISSN 2046-6099

Niveditha, M. and Palanisamy, T. (2026) Upcycling iron-rich industrial waste into a carbon-sequestering composite binder through optimized carbonation curing for structural applications. International Journal of Construction Management, 26(8), pp. 1471-1489. ISSN 1562-3599

Nordby, A S; Berge, B; Hakonsen, F and Hestnes, A G (2009) Criteria for salvageability: The reuse of bricks. Building Research & Information, 37(1), pp. 55-67. ISSN 0961-3218

Nouri, H; Safehian, M and Mir Mohammad Hosseini, S M (2023) Life cycle assessment of earthen materials for low-cost housing a comparison between rammed earth and fired clay bricks. International Journal of Building Pathology and Adaptation, 41(2), pp. 364-377. ISSN 23984708

Obeng-Ahenkora, N. K.; Danso, H. and Kheni, N. A. (2026) Principal component analysis of factors influencing the choice of procurement methods for the procurement of construction materials in Ghana. Engineering, Construction and Architectural Management, 33(7), pp. 5300-5317. ISSN 0969-9988

Obeng-Ahenkora, N K and Danso, H (2020) Principal component analysis of factors influencing pricing decisions of building materials in Ghana. International Journal of Construction Management, 20(2), pp. 122-129. ISSN 1562-3599

Odewole, A O (2020) Development of a collaborative innovation management framework to assist in the utilisation of agricultural waste as building materials in Nigeria. PhD thesis, University of Salford, UK.

Ofori, G and Kien, H L (2004) Translating Singapore architects' environmental awareness into decision making. Building Research & Information, 32(1), pp. 27-37. ISSN 0961-3218

Ogunkah, I (2015) Rethinking low-cost green building material selection process in the design of low-impact green housing developments. PhD thesis, University of Westminster, UK.

Okeyinka, O M (2016) The applicability of recycled waste paper as lightweight building materials. PhD thesis, University of Wolverhampton, UK.

Okoye, P U; Okolie, K C and Odesola, I A (2022) Risks of implementing sustainable construction practices in the Nigerian building industry. Construction Economics and Building, 22(1), pp. 21-46. ISSN 2204-9029

Orstavik, F (2014) Innovation as re-institutionalization: A case study of technological change in housebuilding in Norway. Construction Management and Economics, 32(9), pp. 857-873. ISSN 01446193

Osei-Tutu, S; Ayarkwa, J; Nani, G; Osei-Asibey, D and Abu, I M A (2025) Stakeholders' role towards circular economy implementation: A scientometric review. Construction Innovation, 25(6), pp. 1633-1656. ISSN 1471-4175

Othman, A A; Rahman, S A; Sundram, V P K and Bhatti, M A (2015) Modelling marketing resources, procurement process coordination and firm performance in the Malaysian building construction industry. Engineering, Construction and Architectural Management, 22(6), pp. 644-668. ISSN 0969-9988

Oyewobi, L O; Olorunyomi, O S; Jimoh, R A and Rotimi, J O B (2020) Impact of social media usage on performance of construction businesses (CBS) in Abuja, Nigeria. Journal of Financial Management of Property and Construction, 26(2), pp. 257-278. ISSN 1366-4387

Pahwa, J S (2009) MDSSF: a federated architecture for product procurement. PhD thesis, Cardiff University, UK.

Palaniappan, S; Bashford, H; Li, K; Fafitis, A and Stecker, L (2009) Carbon emissions based on transportation for post-tensioned slab foundation construction: A production home building study in the greater phoenix arizona area. International Journal of Construction Education and Research, 5(4), pp. 236-260. ISSN 1557-8771

Panta, M (2018) Approaches to the resilience and the potential for adaptation through community-driven construction projects in the global South. PhD thesis, University of Brighton, UK.

Parasonis, J; Keizikas, A and Kalibatiene, D (2012) The relationship between the shape of a building and its energy performance. Architectural Engineering and Design Management, 8(4), pp. 246-256. ISSN 1745-2007

Pasha, A H S (1984) The provision of affordable housing in Central Sudan. PhD thesis, University of Bristol, UK.

Patel, K R (2024) Comparative assessment of interior wall construction: A life cycle thinking based evaluation. PhD thesis, University of Windsor, Canada.

Pearlmutter, D; Freidin, C and Huberman, N (2007) Alternative materials for desert buildings: A comparative life cycle energy analysis. Building Research & Information, 35(2), pp. 144-155. ISSN 0961-3218

Peveler, E (2018) The supply of building materials to construction projects in Roman Oxfordshire: Logistics, economics, and social significance. PhD thesis, University of Oxford, UK.

Pinky Devi, L and Palaniappan, S (2019) Life cycle energy analysis of a low-cost house in India. International Journal of Construction Education and Research, 15(4), pp. 256-275. ISSN 1557-8771

Plebankiewicz, E and Kubek, D (2016) Multicriteria selection of the building material supplier using AHP and fuzzy AHP. Journal of Construction Engineering and Management, 142(1): 04015057, ISSN 0733-9364

Plumblee II, J M (2013) Incorporating natural hazard resistance into the life cycle assessment framework. PhD thesis, Clemson University, USA.

Poon, C S; Yu, A T W and Ng, L H (2003) Comparison of low-waste building technologies adopted in public and private housing projects in Hong Kong. Engineering, Construction and Architectural Management, 10(2), pp. 88-98. ISSN 0969-9988

Prieto, A J; Silva, A; de Brito, J and Macias-Bernal, J M (2018) Serviceability of facade claddings. Building Research & Information, 46(2), pp. 179-12. ISSN 0961-3218

Puffer, S M; Zadeh, A A and Peng, Y (2024) Awareness of the global sand crisis and sand substitutes in the construction industry in the United States and Canada: A stakeholder analysis. International Journal of Construction Management, 24(4), pp. 454-466. ISSN 1562-3599

Pusceddu, C; Blumberg, G; Salvalai, G and Imperadori, M (2017) The use of building technology to support disaster resilience: The case study of air shelter house. International Journal of Disaster Resilience in the Built Environment, 8(2), pp. 139-157. ISSN 1759-5916

Pushpakumara, B H J; Gunasekara, M T and Gannile, Y M T D (2023) Variation of mechanical and chemical properties of old and new clay bricks. Journal of Construction Engineering and Management, 149(4): 04023006, ISSN 0733-9364

Ramos, N M M and De Freitas, V P (2009) Experimental determination of the hygroscopic inertia of building materials. Building Research & Information, 37(3), pp. 293-299. ISSN 0961-3218

Ranasinghe, M (1996) Mine restoration bond for clay mining and its impact on the prices of building materials in Sri Lanka. Construction Management and Economics, 14(2), pp. 165-174. ISSN 01446193

Rauf, A; Attoye, D E and Crawford, R H (2024) Evaluating the impact of material service life on embodied energy of residential villas in the United Arab Emirates. Engineering, Construction and Architectural Management, 31(13), pp. 244-270. ISSN 0969-9988

Rosowsky, D V (2011) Recovery: Rebuilding a resilient housing stock. International Journal of Disaster Resilience in the Built Environment, 2(2), pp. 139-147. ISSN 1759-5916

Rousseau, D and Chen, Y (2001) Sustainability options for China's residential building sector. Building Research & Information, 29(4), pp. 293-301. ISSN 0961-3218

Ruokamo, E; Franzini, F; Lähtinen, K and Toppinen, A (2024) To renovate or build with wood? Results from Finnish citizen survey data. Construction Management and Economics, 42(10), pp. 886-901. ISSN 01446193

Saade, M R M; da Silva, M G; Gomes, V; Franco, H G; Schwamback, D and Lavor, B (2014) Material eco-efficiency indicators for Brazilian buildings. Smart and Sustainable Built Environment, 3(1), pp. 54-71. ISSN 2046-6099

Sackey, S and Kim, B S (2018) Environmental and economic performance of asphalt shingle and clay tile roofing sheets using life cycle assessment approach and TOPSIS. Journal of Construction Engineering and Management, 144(11): 04018104, ISSN 0733-9364

Sahu, V; Attri, R; Gupta, P and Yadav, R (2020) Development of eco friendly brick using water treatment plant sludge and processed tea waste. Journal of Engineering, Design and Technology, 18(3), pp. 727-738. ISSN 1726-0531

Samarasinghe, D A S (2014) Building materials supply chains: An evaluative study of the New Zealand residential construction. PhD thesis, Auckland University of Technology, New Zealand.

Sami Kashkooli, A M (2013) A critical building lifecycle assessment framework for building designers and decision makers. PhD thesis, University of Sheffield, UK.

Sandberg, N H and Bratteb, H (2012) Analysis of energy and carbon flows in the future Norwegian dwelling stock. Building Research & Information, 40(2), pp. 123-139. ISSN 0961-3218

Sanga, S A (2020) Compliance with building material specifications among informal skilled construction workers in Dar es Salaam, Tanzania. Journal of Construction in Developing Countries, 25(2), pp. 63-91. ISSN 1823-6499

Sassi, P (2008) Defining closed-loop material cycle construction. Building Research & Information, 36(5), pp. 509-519. ISSN 0961-3218

Sassi, P (2009) Closed loop material cycle construction: defining and assessing closed loop material cycle construction as a component of a comprehensive approach to sustainable material design in the context of sustainable building. PhD thesis, Cardiff University, UK.

Sattary, S and Thorpe, D (2011) Reducing embodied energy in Australian building construction. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Sattary, S and Thorpe, D (2012) Optimizing embodied energy of building construction through bioclimatic principles. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Seethapathy, S and Henderson, J H (2017) Management of construction waste in nuclear and thermal power plant projects in India. Journal of Construction in Developing Countries, 22(S1), pp. 19-46. ISSN 1823-6499

Selman, A D; Guðjónsdóttir, S and Gade, A N (2021) Is the Danish construction sector ready for sustainable and circular construction sites? In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Selman, A D; Heiselberg, H L and Gade, A N (2021) Attitudes towards using wood in the Danish building sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Seo, S and Hwang, Y (2001) Estimation of CO2 emissions in life cycle of residential buildings. Journal of Construction Engineering and Management, 127(5), pp. 414-418. ISSN 0733-9364

Shafei, H; Rahman, R A and Lee, Y S (2024) Effectiveness evaluation of Construction 4.0 technologies in improving built environment resilience. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 530-550. ISSN 1759-5916

Shafei, H; Rahman, R A; Lee, Y S and Che Ibrahim, C K I (2025) Implications of construction 4.0 technologies to enhancing well-being: A fuzzy TOPSIS evaluation. Construction Innovation, 25(1), pp. 131-165. ISSN 1471-4175

Shakantu, M W (2004) An investigation into building material and waste logistics: The case of Cape Town. PhD thesis, Glasgow Caledonian University, UK.

Shakantu, W; Muya, M; Tookey, J and Bowen, P (2008) Flow modelling of construction site materials and waste logistics: A case study from Cape Town, South Africa. Engineering, Construction and Architectural Management, 15(5), pp. 423-439. ISSN 0969-9988

Shararah, H H (1981) Evaluation of wall construction techniques based upon economical factors influencing labor and materials. PhD thesis, Oklahoma State University, USA.

Signor, R; Love, P E D and Olatunji, O (2016) Determining overpricing in Brazilian infrastructure projects: A forensic approach. Journal of Construction Engineering and Management, 142(9): 06016001, ISSN 0733-9364

Sobotka, A (2000) Simulation modelling for logistics re-engineering in the construction company. Construction Management and Economics, 18(2), pp. 183-195. ISSN 01446193

Sohani, H; Seyed Hossein Hosseini, N and Saghatforoush, E (2024) The optimized form of building made from the reused elements. Architectural Engineering and Design Management, 20(2), pp. 191-213. ISSN 1745-2007

Spennemann, D H R (2025) Removal or preservation in place? A review of the conservation management options for asbestos cement sheeting in heritage properties. International Journal of Building Pathology and Adaptation, 43(6), pp. 1406-1422. ISSN 2398-4708

Srinivasan, R S (2011) Re(de)fining net zero energy: Maximizing renewable resource use through emergy analysis of environmental building design. PhD thesis, University of Pennsylvania, USA.

Stephan, A and Crawford, R H (2014) A comprehensive life cycle water analysis framework for residential buildings. Building Research & Information, 42(6), pp. 685-695. ISSN 0961-3218

Stephens, P (1974) Builders' and plumbers' merchanting: an attribute study of organization, functions and performance. PhD thesis, University of Manchester, UK.

Sterner, E (2002) Green procurement of buildings: Estimation of environmental impact and life-cycle cost. PhD thesis, Luleå University of Technology, Sweden.

Sterner, E (2002) 'Green procurement' of buildings: A study of Swedish clients' considerations. Construction Management and Economics, 20(1), pp. 21-30. ISSN 01446193

Strand, S M (2003) The mase decision support system: Development of an integrated information system for the selection of environmentally preferable materials and products in the building process. DrIng thesis, Norges Teknisk-Naturvitenskapelige Universitet, Norway.

Sundquist, J (2004) Low innovation among building material suppliers: The natural level of the trade. Construction Economics and Building, 4(1), pp. 35-44. ISSN 2204-9029

Sundquist, V; Gadde, L-E and Hulthén, K (2018) Reorganizing construction logistics for improved performance. Construction Management and Economics, 36(1), pp. 49-65. ISSN 0144-6193

Sundqvist, J (2008) From focus on price to the pyramid of innovation, information, cooperation, value and trust: A success story of five Swedish building material manufacturers. Construction Economics and Building, 8(2), pp. 11-22. ISSN 2204-9029

Sundqvist, J; Larsson, B and Lindahl, G (2007) Cooperation in the building sector between building material manufacturers and contractors to develop products. Construction Economics and Building, 7(2), pp. 45-53. ISSN 2204-9029

Suprun, Emiliya (2018) An integrated systems model of construction innovation in the Russian federation. PhD thesis, Griffith University, Russia.

Swei, O (2018) Long-run construction cost trends: Baumol's cost disease and a disaggregate look at building material price dynamics. Journal of Construction Engineering and Management, 144(7): 04018058, ISSN 0733-9364

Sánchez Vivas, L; Costello, K; Mobley, S; Mihelcic, J R and Mullins, G (2022) Determination of safety factors for structural bamboo design applications. Architectural Engineering and Design Management, 18(1), pp. 26-37. ISSN 1745-2007

Taher, A H and Elbeltagi, E E (2023) Integrating building information modeling with value engineering to facilitate the selection of building design alternatives considering sustainability. International Journal of Construction Management, 23(11), pp. 1886-1901. ISSN 1562-3599

Tang, B Q; Han, J; Guo, G F; Chen, Y and Zhang, S (2019) Building material prices forecasting based on least square support vector machine and improved particle swarm optimization. Architectural Engineering and Design Management, 15(3), pp. 196-212. ISSN 1745-2007

Tas, E; Yaman, H and Tanacan, L (2008) A building material evaluation and selection model for the Turkish construction sector. Engineering, Construction and Architectural Management, 15(2), pp. 149-163. ISSN 0969-9988

Thangaraj, R K and Chan, T K (2012) The effects of the global financial crisis on the Australian building construction supply chain. Construction Economics and Building, 12(3), pp. 16-30. ISSN 2204-9029

Thormark, C (2000) Including recycling potential in energy use into the life-cycle of buildings. Building Research & Information, 28(3), pp. 176-183. ISSN 0961-3218

Tiew, S Y (2025) Improving professional development through building contract administration (bca) framework of housing projects for graduate architects. Engineering, Construction and Architectural Management, 32(8), pp. 5272-5290. ISSN 0969-9988

Tiew, S Y (2025) A construction contract administration (cca) framework for graduate architects' professional development. Engineering, Construction and Architectural Management, 32(12), pp. 8056-8072. ISSN 0969-9988

Tighnavard Balasbaneh, A.; Sher, W. and Ashour, A. (2026) Combining the circular economy and bio-based materials for alternative waste wood applications for the construction industry. Engineering, Construction and Architectural Management, 33(5), pp. 4257-4277. ISSN 0969-9988

Toller, S; Carlsson, A; Wadeskog, A; Miliutenko, S and Finnveden, G (2013) Indicators for environmental monitoring of the Swedish building and real estate management sector. Building Research & Information, 41(2), pp. 146-155. ISSN 0961-3218

Treloar, G; Fay, R; Love, P E D and Iyer-Raniga, U (2000) Analysing the life-cycle energy of an Australian residential building and its householders. Building Research & Information, 28(3), pp. 184-195. ISSN 0961-3218

Treloar, G J (1998) A comprehensive embodied energy analysis framework. PhD thesis, Deakin University, Australia.

Treloar, G J (2000) Streamlined life cycle assessment of domestic structural wall members. Journal of Construction Research, 1(1), pp. 69-76. ISSN 1609-9451

Treloar, G J; Love, P E D; Faniran, O O and Iyer-Raniga, U (2000) A hybrid life cycle assessment method for construction. Construction Management and Economics, 18(1), pp. 5-9. ISSN 01446193

Trinius, W (1999) Environmental assessment in building and construction goals and scope definition as key to methodology choices. DrTech thesis, Kungliga Tekniska Hogskolan, Sweden.

Van Zyl, I J (1986) The role of standardization in the building industry. DSc thesis, University of Pretoria, South Africa.

Victar, H C; Perera, B A K S; Palihakkara, A D and Dewagod, K G (2024) Roles and competencies of quantity surveyors in achieving a circular built environment: An investigation according to 3r principles. Smart and Sustainable Built Environment, 13(4), pp. 1015-1040. ISSN 2046-6099

Vijaya Prasad, B; Paul Daniel, A P; Anand, N and Yadav, S K (2022) Strength and microstructure behaviour of high calcium fly ash based sustainable geo polymer concrete. Journal of Engineering, Design and Technology, 20(2), pp. 436-454. ISSN 1726-0531

Vitorio Junior, P C and Kripka, M (2021) Fair wage potential as a tool for social assessment in building projects. Engineering, Construction and Architectural Management, 28(4), pp. 1295-1318. ISSN 0969-9988

Wan Omar, Sabki (2015) Analysis of embodied energy and carbon in Malaysian building construction using hybrid life cycle assessment. PhD thesis, Griffith University, Malaysia.

Wanaguru, K; Mallawaarachchi, H and Vijerathne, D (2025) Prisma-based review and development of a circularity assessment framework for building construction material selection. Built Environment Project and Asset Management, 15(3), pp. 557-573. ISSN 2044-124X

Watson, N (2016) Developing material selection strategies to improve the embodied impacts of buildings. EngD thesis, University of Bath, UK.

Weerasuriya, G T; Perera, S and Calheiros, R N (2025) Technological imperatives for issues in the certification of quality, progress, and payments in construction projects: A systematic review. Construction Economics and Building, 25(1), pp. 25-48. ISSN 2204-9029

Wells, J (1993) Appropriate building technologies: An appraisal based on case studies of building projects in Senegal and Kenya. Construction Management and Economics, 11(3), pp. 203-216. ISSN 01446193

Westberg, K; Norén, J and Kus, H (2001) On using available environmental data in service life estimations. Building Research & Information, 29(6), pp. 428-439. ISSN 0961-3218

Windapo, A and Moghayedi, A (2018) Building material price differentiation across geographic locations in South Africa. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(6), pp. 243-254. ISSN 17514304

Windapo, A; Moghayedi, A; Oliphant, D and Adediran, A (2018) Exploring the components of cost on construction projects. Journal of Construction Business and Management, 2(2), pp. 42-50. ISSN 2521-0165

Windapo, A O and Cattell, K (2013) The South African construction industry: Perceptions of key challenges facing its performance, development and growth. Journal of Construction in Developing Countries, 18(2), pp. 65-79. ISSN 1823-6499

Wong, E O W and Yip, R C P (2004) Promoting sustainable construction waste management in Hong Kong. Construction Management and Economics, 22(6), pp. 563-566. ISSN 01446193

Wong, Florence (2025) Mass engineered timber construction in Southeast Asia: An analysis of obstacles, drivers and opportunities in hot and humid cities. PhD thesis, University of New South Wales, Australia.

Wong, J K W; Bameri, F; Ahmadian Fard Fini, A and Maghrebi, M (2025) Tracking indoor construction progress by deep-learning-based analysis of site surveillance video. Construction Innovation, 25(2), pp. 461-489. ISSN 1471-4175

Wood H L, P P F E R P (2013) Understanding complexity in the AEC industry. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Wu, J (2020) Optimization design of building isolation structure based on sustainable benefit analysis. International Journal of Building Pathology and Adaptation, 39(3), pp. 461-469. ISSN 23984708

Xu, Yuqing (2025) Enhancing reliability and efficiency of upfront embodied carbon assessment leveraging openbim, llm, DES, and blockchain. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Xue, X; Tan, X and Fan, H (2026) Mapping the trajectories of digital technology innovation in the construction industry: An integrated spnp and louvain approach. Engineering, Construction and Architectural Management, 33(1), pp. 477-508. ISSN 0969-9988

Yildiz, S and Güneş, S (2026) Establishing a model for the selection of building materials: An application for roof coverings. International Journal of Construction Management, 26(4), pp. 718-733. ISSN 1562-3599

Yussupov, A N and Yussupova, A A (2022) Ecological houses of southern Kazakhstan using renewable energy sources. Smart and Sustainable Built Environment, 11(3), pp. 593-607. ISSN 2046-6099

Zami, M S (2021) Enablers supporting acceptance of earth-based material in UK urban housing sector. Architectural Engineering and Design Management, 17(1-2), pp. 92-109. ISSN 1745-2007

Zeni, K S and Kikwasi, G J (2023) Factors affecting maintenance cost of public buildings: Case study of Tanzania buildings agency and national housing corporation. International Journal of Building Pathology and Adaptation, 41(5), pp. 926-941. ISSN 23984708

Zhao, Y (2016) Green supply chain management drivers/pressures, practices and performance in Chinese construction industry. PhD thesis, Anglia Ruskin University, UK.

de Oliveira, R (1994) A methodology for housing design. PhD thesis, University of Waterloo, Canada.

van den Berg, Marc Casper (2019) Managing circular building projects. PhD thesis, University of Twente, Netherlands.

Çankaya Topak, S (2024) Conforming to future changes in buildings: A component-oriented detailing strategy. PhD thesis, Middle East Technical University, Turkey.