Items with Index Term: building defect

Abisuga, A O; Famakin, I O and Oshodi, O S (2016) Educational building conditions and the health of users. Construction Economics and Building, 16(4), pp. 19-34. ISSN 2204-9029

Ahmad, A G and Rahman, H F A (2010) Treatment of salt attack and rising damp in heritage buildings in Penang, Malaysia. Journal of Construction in Developing Countries, 15(1), pp. 93-113. ISSN 1823-6499

Al-Rugaib, T A (1996) Project information, office automation, and quality in building production process in Saudi Arabia. PhD thesis, Cardiff University, UK.

Almås, A J; Lisø, K R; Hygen, H O; Øyen, C F and Thue, J V (2011) An approach to impact assessments of buildings in a changing climate. Building Research & Information, 39(3), pp. 227-238. ISSN 0961-3218

Andrews, F; Sal Moslehian, A; Johnston, N and Tucker, R (2024) Impacts of building defects on the health and wellbeing of apartment residents: A scoping review. Building Research & Information, 52(4), pp. 446-462. ISSN 0961-3218

Asmone, A S (2020) Development of a bayesian based design-for-maintinability decision support framework. PhD thesis, National University of Singapore, Singapore.

Atkinson, A R (2002) The pathology of building defects; a human error approach. Engineering, Construction and Architectural Management, 9(1), pp. 53-61. ISSN 0969-9988

Benster, N A (1970) A study and assessment of water penetration and rapid deterioration in existing dwellings-developed as a guide to future building design, production and maintenance management. PhD thesis, University of Manchester Institute of Science and Technology, UK.

Boothman, J C; Higham, A and Horsfall, B (2012) Attaining zero defects within building schools for the future: A realistic target or a sisyphean task? In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Boothman C, H A (2013) Attaining zero defects within the UK's building schools for the future programme: Stakeholders' perceptions. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Bright, K (1992) Computer assisted teaching system for the diagnosis of building defects. Construction Management and Economics, 10(3), pp. 203-226. ISSN 01446193

Burrell, P A (2017) Structural errors and failures in construction: is knowledge hidden? PhD thesis, Anglia Ruskin University, UK.

Cardellicchio, L (2021) Building defects in new iconic structures: The technical challenge and the economic impact of restoring the Jubilee Church in Rome. Architectural Engineering and Design Management, 17(1-2), pp. 146-166. ISSN 1745-2007

Chew, M Y L and De Silva, N (2003) Maintainability problems of wet areas in high-rise residential buildings. Building Research & Information, 31(1), pp. 60-69. ISSN 0961-3218

Chew, M Y L; De Silva, N and Tan, S S (2004) A neural network approach to assessing building façade maintability in the tropics. Construction Management and Economics, 22(6), pp. 581-594. ISSN 0144-6193

Comiskey, D and Wilson, K (2020) A performance barrier? Cavity barrier installation in wall envelope makeups. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Conejos, S; Chew, M Y L; Tay, K; Tay, S and Safiena, S (2023) Green maintainability assessment of building-integrated photovoltaic (BIPV) applications: Lessons learnt. International Journal of Building Pathology and Adaptation, 41(2), pp. 320-346. ISSN 23984708

Crommelin, L; Loosemore, M; Easthope, H and Randolph, B (2024) How information asymmetries exacerbate building defects risks for purchasers of Australian residential multi-owned properties. Building Research & Information, 52(6), pp. 644-657. ISSN 0961-3218

Cusumano, L; Olsson, N; Granath, M; Jockwer, R and Rempling, R (2025) Clustering techniques and keyword extraction with large language models for knowledge discovery in building defects data. Construction Innovation, 25(7), pp. 76-97. ISSN 1471-4175

Faqih, F; Zayed, T and Alfalah, G (2022) Technology-based multi-tiered building diagnosis framework. International Journal of Building Pathology and Adaptation, 40(1), pp. 101-133. ISSN 23984708

Forcada, N; MacArulla, M; Gangolells, M and Casals, M (2014) Assessment of construction defects in residential buildings in Spain. Building Research & Information, 42(5), pp. 629-640. ISSN 0961-3218

Forman, M and Haugbølle, K (2009) Arbitration and expert appraisals of defects in construction: What do companies learn? In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Georgiou, J (2013) Workmanship and defects in housing in the state of Victoria, Australia. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Gurmu, A.; Galluzzo, A. and Kite, J. (2021) Modelling customers' perception of the quality of services provided by builders: A case of Victoria, Australia. Construction Economics and Building, 21(1), pp. 100-124. ISSN 2204-9029

Gurmu, A; Hosseini, M R; Arashpour, M and Lioeng, W (2025) Development of building defects dashboards and stochastic models for multi-storey buildings in Victoria, Australia. Construction Innovation, 25(2), pp. 594-619. ISSN 1471-4175

Gurmu, A T; Krezel, A and Mahmood, M N (2023) Analysis of the causes of defects in ground floor systems of residential buildings. International Journal of Construction Management, 23(2), pp. 268-275. ISSN 1562-3599

Hermawan, F (2015) A strategic approach to enhancing sustainable practices in public building projects: a case study of Indonesian local authorities. PhD thesis, Coventry University, UK.

Ilozor, B B (2008) Architectural and building features disparity and preservation of structural and fabrics integrity. Journal of Engineering, Design and Technology, 6(1), pp. 33-47. ISSN 1726-0531

Ismail, Z A (2014) System development toward effective maintenance management practices. Built Environment Project and Asset Management, 4(4), pp. 406-422. ISSN 2044-124X

Jesumoroti, C; Olanrewaju, A and Khor, S C (2024) Defects in Malaysian hospital buildings. International Journal of Building Pathology and Adaptation, 42(5), pp. 835-856. ISSN 2398-4708

Johnsson, H and Meiling, J H (2009) Defects in offsite construction: Timber module prefabrication. Construction Management and Economics, 27(7), pp. 667-681. ISSN 1466433X

Koch, C and Schultz, C S (2019) The production of defects in construction: an agency dissonance. Construction Management and Economics, 37(9), pp. 499-512. ISSN 01446193

Li, L; Sandanayake, M; Yang, A; Izadyar, N; Chen, S; O'Brien, D and Vrcelj, Z (2026) A virtual platform for managing building inspections during the construction of detached dwellings. International Journal of Construction Management, 26(2), pp. 295-315. ISSN 1562-3599

Lisø, K R; Kvande, T and Thue, J V (2005) High-performance weather-protective flashings. Building Research & Information, 33(1), pp. 41-54. ISSN 0961-3218

Lundkvist, R; Meiling, J H and Sandberg, M (2014) A proactive plan-do-check-act approach to defect management based on a Swedish construction project. Construction Management and Economics, 32(11), pp. 1051-1065. ISSN 01446193

Mills, A; Love, P E D and Williams, P (2009) Defect costs in residential construction. Journal of Construction Engineering and Management, 135(1), pp. 12-16. ISSN 0733-9364

Ní Fhloinn, D (2017) Liability in negligence for building defects in Ireland, England and Australia: Where statute speaks, must common law be silent? International Journal of Law in the Built Environment, 9(3), pp. 178-192. ISSN 1756-1450

Oladokun, T T (2016) Effects of climate change on commercial properties in Lagos state, Nigeria. African Journal of Built Environment Research, 1(1), pp. 15-27. ISSN 2414-0236

Olubodun, O F (1996) An empirical approach to the evaluation of factors in local authority housing maintenance requirements in the City of Manchester. PhD thesis, University of Salford, UK.

Organ, S (2020) The opportunities and challenges of improving the condition and sustainability of a historic building at an international tourist attraction in the UK. International Journal of Building Pathology and Adaptation, 38(2), pp. 329-355. ISSN 23984708

Royal, S; Lehoux, N and Blanchet, P (2022) New home warranty schemes: Developing a theoretical comparative framework using qualitative content analysis. International Journal of Building Pathology and Adaptation, 40(4), pp. 499-522. ISSN 23984708

Sajjad, M; Jayasinghe, C and Perera, P (2024) Damage assessment automation for single storey detached masonry houses: a probabilistic approach. Building Research & Information, 52(5), pp. 551-563. ISSN 0961-3218

Sandanayake, M; Yang, W; Chhibba, N and Vrcelj, Z (2022) Residential building defects investigation and mitigation: a comparative review in Victoria, Australia, for understanding the way forward. Engineering, Construction and Architectural Management, 29(9), pp. 3689-3711. ISSN 0969-9988

Schultz, C (2012) The role of problem solving in construction management practices. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Schultz, C S; Jørgensen, K; Bonke, S and Rasmussen, G M G (2015) Building defects in Danish construction: Project characteristics influencing the occurrence of defects at handover. Architectural Engineering and Design Management, 11(6), pp. 423-439. ISSN 1745-2007

Tarekegn Gurmu, A and Mahmood, M N (2024) Critical factors affecting quality in building construction projects: Systematic review and meta-analysis. Journal of Construction Engineering and Management, 150(3): 04024004, ISSN 0733-9364

Van Den Bossche, N; Blommaert, A and Daniotti, B (2023) The impact of demographical, geographical and climatological factors on building defects in Belgium. International Journal of Building Pathology and Adaptation, 41(3), pp. 549-573. ISSN 23984708

de Silva, N; Ranasinghe, M and de Silva, C R (2012) Risk factors affecting building maintenance under tropical conditions. Journal of Financial Management of Property and Construction, 17(3), pp. 235-252. ISSN 1366-4387