Items with Index Term: ambient temperature

Baharfar, Y; Mohammadyan, M; Moattar, F; Nassiri, P and Behzadi, M H (2022) Indoor pm2.5 concentrations of pre-schools; determining the effective factors and model for prediction. Smart and Sustainable Built Environment, 11(4), pp. 1042-1059. ISSN 2046-6099

Cole, R; Simpson, C H; Ferguson, L; Symonds, P; Taylor, J; Heaviside, C; Murage, P; Macintyre, H L; Hajat, S; Mavrogianni, A and Davies, M (2024) A population-level framework to estimate unequal exposure to indoor heat and air pollution. Buildings & Cities, 5(1), pp. 562-580. ISSN 2632-6655

Dave, N; Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology, 18(5), pp. 1321-1333. ISSN 1726-0531

Elimov, R (2003) The control of concrete quality during slipforming operations. PhD thesis, Universite de Sherbrooke, Canada.

Erkan, İ (2021) Cognitive response and how it is affected by changes in temperature. Building Research & Information, 49(4), pp. 399-416. ISSN 0961-3218

Farahani, A V; kravchenko, I; Jokisalo, J; Korhonen, N; Jylhä, K and Kosonen, R (2024) Overheating assessment for apartments during average and hot summers in the Nordic climate. Building Research & Information, 52(3), pp. 273-291. ISSN 0961-3218

Hinze, J and Brown, J (1994) Properties of soundless chemical demolition agents. Journal of Construction Engineering and Management, 120(4), pp. 816-827. ISSN 0733-9364

Jacob, J C; Pandit, D and Sen, J (2023) An explorative study on transient cooling pattern and energy efficiency while using micro-zonal occupant-centric control. Architectural Engineering and Design Management, 19(4), pp. 340-359. ISSN 1745-2007

Jebelli, H; Choi, B and Lee, S (2019) Application of wearable biosensors to construction sites. II: Assessing workers' physical demand. Journal of Construction Engineering and Management, 145(12): 04019080, ISSN 0733-9364

Lihakanga, R (2022) Generic wireless sensor network for dynamic monitoring of a new generation of building material. PhD thesis, Heriot-Watt University, UK.

Luo, M; Zhang, H; Wang, Z; Arens, E; Chen, W; Bauman, F S and Raftery, P (2021) Ceiling-fan-integrated air-conditioning: Thermal comfort evaluations. Buildings & Cities, 2(1), pp. 928-951. ISSN 2632-6655

Mostafaeipour, A; Goudarzi, H; Sedaghat, A; Jahangiri, M; Hadian, H; Rezaei, M; Golmohammadi, A M and Karimi, P (2019) Energy efficiency for cooling buildings in hot and dry regions using sol-air temperature and ground temperature effects. Journal of Engineering, Design and Technology, 17(3), pp. 613-628. ISSN 1726-0531

Shekhawat, P; Sharma, G and Singh, R M (2020) Durability analysis of eggshell powder–flyash geopolymer composite subjected to wetting–drying cycles. Journal of Engineering, Design and Technology, 18(6), pp. 2043-2060. ISSN 1726-0531

Short, C A; Lomas, K J and Woods, A (2004) Design strategy for low-energy ventilation and cooling within an urban heat island. Building Research & Information, 32(3), pp. 187-206. ISSN 0961-3218

Tangwe, S and Simon, M (2019) Quantification of the viability of residential air source heat pump water heaters as potential replacement for geysers in South Africa. Journal of Engineering, Design and Technology, 17(2), pp. 456-470. ISSN 1726-0531

Tangwe, S L; Simon, M and Meyer, E L (2016) Design of a heat pump water heater performance monitoring system: To determine performance of a split type system. Journal of Engineering, Design and Technology, 14(4), pp. 739-751.

Waziri, N H; Usman, A M and Enaburekhan, J S (2015) Optimum temperature and solar radiation periods for kano using flat plate collector. Journal of Engineering, Design and Technology, 13(4), pp. 570-578.