Items with Index Term: academia

Abbas, M A; Ajayi, S O; Oyegoke, A S and Alaka, H (2024) A cloud-based collaborative ecosystem for the automation of BIM execution plan (BEP). Journal of Engineering, Design and Technology, 22(4), pp. 1306-1324. ISSN 1726-0531

Abduh, M (2000) Utility assessment of electronic networking technologies for design -build projects. PhD thesis, Purdue University, USA.

Abduh, M and Skibniewski, M J (2004) Electronic networking technologies in construction. Journal of Construction Research, 5(1), pp. 17-42. ISSN 1609-9451

Abdulai, S F; Zayed, T; Taiwo, R and Ali, A H (2025) Hybrid statistical analysis of critical alignment factors in modular integrated construction. Journal of Construction Engineering and Management, 151(9): 04025129, ISSN 0733-9364

Abraham, G L (2002) Identification of critical success factors for construction organizations in the architectural /engineering /construction (A/E/C) industry. PhD thesis, Georgia Institute of Technology, USA.

Abudayyeh, O; Dibert-DeYoung, A and Jaselskis, E (2004) Analysis of trends in construction research: 1985-2002. Journal of Construction Engineering and Management, 130(3), pp. 433-439. ISSN 0733-9364

Acheng, P O; Kibwami, N; Mukasa, T J; Odongkara, B B; Birungi, R; Semanda, J and Manga, M (2023) Building information modelling adoption in uganda's construction industry. International Journal of Construction Management, 23(13), pp. 2185-2208. ISSN 1562-3599

Afroz, R (2020) Developing a low-carbon architecture pedagogy in Bangladesh. Buildings & Cities, 1(1), pp. 637-649. ISSN 2632-6655

Ahankoob, A; Manley, K and Abbasnejad, B (2022) The role of contractors' building information modelling (BIM) experience in realising the potential values of BIM. International Journal of Construction Management, 22(4), pp. 588-599. ISSN 1562-3599

Ahiaga-Dagbui D D, T O and Smith S D, W S (2013) A neuro-fuzzy hybrid model for predicting final cost of water infrastructure projects. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Ahmed, A L (2019) Development of conceptual constructs for organisational BIM adoption and their systematic application within the UK architecture sector. PhD thesis, University of Sheffield, UK.

Ahmed, V; Pathmeswaran, R; Baldry, D; Worrall, L and Abouen, S (2008) An investigation into the barriers facing black and minority ethnics within the UK construction industry. Journal of Construction in Developing Countries, 13(2), pp. 83-99. ISSN 1823-6499

Ajayi, O O (2016) Maintenance management of prison facilities in South-West, Nigeria. PhD thesis, University of Lagos, Nigeria.

Akade, S A (2017) Understanding the impact of culture on project execution in a developing country: an action research study of six international oil and gas companies in Nigeria. PhD thesis, University of Liverpool, UK.

Akinbogun, O T (2023) An integrated capacity development for artisans in the Nigerian construction industry. PhD thesis, University of Johannesburg, South Africa.

Al-Harthi, A S A (2016) Modelling the relationship between client activities and construction procurement performance in Oman. PhD thesis, Loughborough University, UK.

Alade, K and Windapo, A O (2021) Developing effective 4IR leadership framework for construction organisations. Engineering, Construction and Architectural Management, 28(5), pp. 1377-1396. ISSN 0969-9988

Alameri, R and Esmaeili, B (2023) Progressive design-build delivery method: Assessment of project performance. International Journal of Construction Education and Research, 19(1), pp. 22-41. ISSN 1557-8771

Ali, A B M (2019) A composite index for enhancing sustainability within public housing projects in Libya. PhD thesis, University of Salford, UK.

Aliu, J and Aigbavboa, C O (2021) Structural determinants of graduate employability: Impact of university and industry collaborations. Journal of Engineering, Design and Technology, 19(5), pp. 1080-1100. ISSN 1726-0531

Alyami, S (2015) The development of sustainable assessment method for Saudi Arabia built environment. PhD thesis, Cardiff University, UK.

Amarasinghe, I A and Hadiwattege, C (2022) Enablers for facilitating life cycle assessment: Key stakeholder perspectives of Sri Lankan construction industry. Built Environment Project and Asset Management, 12(4), pp. 590-612. ISSN 2044-124X

Amaratunga, D; Malalgoda, C I and Keraminiyage, K (2018) Contextualising mainstreaming of disaster resilience concepts in the construction process. International Journal of Disaster Resilience in the Built Environment, 9(4-5), pp. 348-367. ISSN 1759-5916

Anderson, J (2023) Reducing embodied carbon in the built environment: The role of environmental product declarations. PhD thesis, Open University, UK.

Aouad, G F; Ozorhon, B and Abbott, C (2010) Facilitating innovation in construction: Directions and implications for research and policy. Construction Innovation, 10(4), pp. 374-394. ISSN 1471-4175

Arar, A J; Poirier, E and Staub-French, S (2025) A research and development framework for integrated project delivery. Construction Management and Economics, 43(2), pp. 85-112. ISSN 0144-6193

Arayamparambil, S. R.; Jha, K. N. and Singh, A. (2026) Development of a quality assessment scoring framework for residential buildings. International Journal of Building Pathology and Adaptation, 44(4), pp. 833-848. ISSN 2398-4708

Asadi, R; Wilkinson, S and Rotimi, J O B (2021) Towards contracting strategy usage for rework in construction projects: A comprehensive review. Construction Management and Economics, 39(12), pp. 953-971. ISSN 01446193

Azhar, S; Ahmad, I and Sein, M K (2010) Action research as a proactive research method for construction engineering and management. Journal of Construction Engineering and Management, 136(1), pp. 87-98. ISSN 0733-9364

Azzouz, A (2018) Current perspectives and future directions of BIM assessment methods. PhD thesis, University of Bath, UK.

Azzouz, A and Abdelal, A (2019) Young Syrian architects at the time of crises. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Azzouz, A; Copping, A; Shepherd, P and Duncan, A (2016) Using the arup BIM maturity measure to demonstrate BIM implementation in practice. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Baba, A; Mahjoubi, L; Olomoilaiye, P and Booth, C (2013) Decision support framework for low impact housing design in the UK. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Babatunde, S O and Ekundayo, D (2019) Barriers to the incorporation of BIM into quantity surveying undergraduate curriculum in the Nigerian universities. Journal of Engineering, Design and Technology, 17(3), pp. 629-648. ISSN 1726-0531

Babatunde, S O; Ekundayo, D; Babalola, O and Jimoh, J A (2018) Analysis of the drivers and benefits of BIM incorporation into quantity surveying profession: Academia and students' perspectives. Journal of Engineering, Design and Technology, 16(5), pp. 750-766. ISSN 1726-0531

Babon-Ayeng, P; Kissi, E; Tannor, R A; Aigbavboa, C and Badu, E (2024) Critical success factors (CSFs) for the adoption of green construction concepts in road construction in Ghana. International Journal of Construction Management, 24(13), pp. 1465-1474. ISSN 1562-3599

Bai, L; Xie, X; Sun, Y; Qu, X and Han, X (2025) Assessing project criticality in project portfolio: A vulnerability modeling approach. Engineering, Construction and Architectural Management, 32(5), pp. 2890-2919. ISSN 0969-9988

Baiden, B K (2006) Framework for the integration of the project delivery team. PhD thesis, Loughborough University, UK.

Bajpai, A and Misra, S C (2023) A framework for continuation of digitalization in construction: A PLS-SEM approach. Engineering, Construction and Architectural Management, 30(10), pp. 4715-4734. ISSN 0969-9988

Bajpai, A and Misra, S C (2024) Evaluation of success factors to implement digitalization in the construction industry. Construction Innovation, 24(4), pp. 865-891. ISSN 1471-4175

Ball, Z; Cagan, J and Kotovsky, K (2024) Supporting management of new product development via a novel conceptual model: An interview driven approach. Journal of Engineering, Design and Technology, 22(3), pp. 991-1011. ISSN 1726-0531

Balogun, T B; Awonuga, O O and Abowen-Dake, R (2023) Investigating digital technological competencies amongst black Asian minority ethnic construction students in the UK. Journal of Engineering, Design and Technology, 21(6), pp. 1857-1882. ISSN 1726-0531

Baroudi, B and R. Rapp, R (2014) Stakeholder management in disaster restoration projects. International Journal of Disaster Resilience in the Built Environment, 5(2), pp. 182-193. ISSN 1759-5916

Barr, B (2008) UK civil engineering education in the twenty-first century. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 161(1), pp. 17-23. ISSN 17514312

Bayrak, T (2008) Semi automatic construction progress measurement using a combination of CAD modelling, photogrammetry and construction knowledge. PhD thesis, Heriot-Watt University, UK.

Bebelaar, N; Braggaar, R C; Kleijwegt, C M; Meulmeester, R W E; Michailidou, G; Salheb, N; van der Spek, S; Vaissier, N and Verbree, E (2018) Monitoring urban environmental phenomena through a wireless distributed sensor network. Smart and Sustainable Built Environment, 7(1), pp. 68-79. ISSN 2046-6099

Belayutham, S and Ibrahim, C K I C (2019) Barriers and strategies for better safety practices: The case of construction SMEs in Malaysia. Construction Economics and Building, 19(1), pp. 20-39. ISSN 2204-9029

Bello, A. O. (2026) Towards achieving circular economy in the Nigerian construction industry: Policymakers perspectives and conceptual framework development. Smart and Sustainable Built Environment, 15(3), pp. 1391-1411. ISSN 2046-6099

Bello, A O; Isa, R B; Oke, A E; Arogundade, S and Lewis, J M O (2026) Circular economy implementation in the construction industry: An examination of the barriers in a developing country. International Journal of Building Pathology and Adaptation, 44(1), pp. 143-162. ISSN 2398-4708

Bello, A O; Khan, A A; Idris, A and Awwal, H M (2024) Barriers to modular construction systems implementation in developing countries' architecture, engineering and construction industry. Engineering, Construction and Architectural Management, 31(8), pp. 3148-3164. ISSN 0969-9988

Besklubova, S; Zhong, R Y and Tan, B Q (2025) An integrated model of a prefabrication hub feasibility assessment: A Hong Kong case. International Journal of Construction Management, 25(11), pp. 1300-1312. ISSN 1562-3599

Bhatnagar, S; Jacob, G; Devkar, G; Rybkowski, Z K; Arefazar, Y and Obulam, R (2023) A systematic review of lean simulation games in the construction industry. Architectural Engineering and Design Management, 19(6), pp. 701-719. ISSN 1745-2007

Bhattacharya, S and Momaya, K S (2021) Actionable strategy framework for digital transformation in AECO industry. Engineering, Construction and Architectural Management, 28(5), pp. 1397-1422. ISSN 0969-9988

Bigelow, B F; Bilbo, D and Baker, M (2016) Construction management research: A comparison of perceived value by general contractors, prevalence of publication, and funding. International Journal of Construction Education and Research, 12(3), pp. 224-240. ISSN 1557-8771

Bigelow, B F; Bilbo, D; Ritter, L; Mathew, M and Elliott, J W (2016) An evaluation of factors for retaining female students in construction management programs. International Journal of Construction Education and Research, 12(1), pp. 18-36. ISSN 1557-8771

Bijivemula, S K R; Sai, S J and Chepuri, A (2024) A structural equation model of stakeholder roles in the implementation of green construction strategies in the Indian construction industry. International Journal of Construction Management, 24(5), pp. 486-494. ISSN 1562-3599

Bishop, J (2009) Managing technical knowledge to enhance organisational best practice. PhD thesis, Loughborough University, UK.

Bisola, T (2024) Business modelling for cloud-based building information modelling (cbim). DE thesis, Technische Universitaet Berlin, Germany.

Bo, X and Chan, A P C (2012) Investigation of barriers to entry into the design-build market in the people's republic of China. Journal of Construction Engineering and Management, 138(1), pp. 120-127. ISSN 0733-9364

Boissonneault, A and Peters, T (2025) The POE paradigm in architecture: Practices and perspectives of Canadian practitioners. Building Research & Information, 53(5), pp. 565-581. ISSN 0961-3218

Booker, J D; Lock, R; Williamson, S and Freire, G J (2016) Effective practices for the concept design of electromechanical systems. Journal of Engineering, Design and Technology, 14(3), pp. 489-506.

Boyd, P and Harding, D (2025) Generative AI: reconfiguring supervision and doctoral research. Buildings & Cities, 6(1), pp. 294-309. ISSN 2632-6655

Brooks, T; Spillane, J; Tansey, P and Hendron, C (2016) The impact of the recent economic recession on the operation of the NEC contract in Northern Ireland. Construction Management and Economics, 34(6), pp. 393-417. ISSN 01446193

Brown, L A and Cresciani, M (2017) Adaptable design in olympic construction. International Journal of Building Pathology and Adaptation, 35(4), pp. 397-416.

Buchholz, M and Lützkendorf, T (2023) European building passports: Developments, challenges and future roles. Buildings & Cities, 4(1), pp. 902-919. ISSN 2632-6655

Buhl, H; Andersen, M and Harty, J (2020) Construction industry 4.0: Entangling colliding practices. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Burgett, J M; Smith, J P and Lavang, Y (2017) A comparison between industry's and academia's perceptions of a career in construction education. International Journal of Construction Education and Research, 13(4), pp. 251-66. ISSN 1557-8771

Caldas, C H; Kim, J Y; Haas, C T; Goodrum, P M and Zhang, D (2015) Method to assess the level of implementation of productivity practices on industrial projects. Journal of Construction Engineering and Management, 141(1): 04014061, ISSN 0733-9364

Campbell, J M and Smith, S D (2006) Improving industrial value and longevity of safety management research. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Carmody, S; Spillane, J P and Clarke, N (2022) Barriers to the implementation of modular construction in Ireland: A case study from an Irish small and medium-sized enterprise perspective. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Carpenter, W J (2004) Design and construction in architectural education: 1963-2003. PhD thesis, Birmingham City University, UK.

Charlson, J (2021) Emerging trends in construction law at the confluence of academia and industry. PhD thesis, University of Wolverhampton, UK.

Chen, C (2015) A proactive approach for change management and control on construction projects. PhD thesis, University of California, Berkeley, USA.

Chen, G X; Shan, M; Chan, A P C; Liu, X and Zhao, Y Q (2019) Investigating the causes of delay in grain bin construction projects: The case of China. International Journal of Construction Management, 19(1), pp. 1-14. ISSN 1562-3599

Chen, L (2019) An integrated construction schedule risk analysis approach for infrastructure projects under uncertainty. PhD thesis, University of Hong Kong, Hong Kong.

Chen, Q; Reichard, G and Beliveau, Y (2008) Multiperspective approach to exploring comprehensive cause factors for interface issues. Journal of Construction Engineering and Management, 134(6), pp. 432-441. ISSN 0733-9364

Chinowsky, P S and Meredith, J E (2000) Strategic management in construction. Journal of Construction Engineering and Management, 126(1), pp. 1-9. ISSN 0733-9364

Chiponde, D B; Gledson, B and Greenwood, D (2024) Challenges and opportunities of learning from failure: Looking backwards to move forward using vignettes. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Correa, J. G. A.; Alves, J. L.; Homrich, A. S. and Carvalho, M. M. d (2026) Evolving skillsets of architecture, engineering and construction sector: Unveiling the interplay between project management, BIM, strategic and operational skills. Engineering, Construction and Architectural Management, 33(3), pp. 2422-2447. ISSN 0969-9988

Costa, S; Carvalho, M S; Pimentel, C and Duarte, C (2023) A systematic literature review and conceptual framework of construction industrialization. Journal of Construction Engineering and Management, 149(2): 3122013, ISSN 0733-9364

Dao, B P (2016) Exploring and measuring project complexity. PhD thesis, Texas A&M University, USA.

Debrah, C; Owusu-Manu, D G; Amonoo-Parker, L; Baiden, B K; Oduro-Ofori, E and Edwards, D J (2023) A factor analysis of the key sustainability content underpinning green cities development in Ghana. International Journal of Construction Management, 23(14), pp. 2469-2478. ISSN 1562-3599

Dehghan, R (2012) A new model, algorithm and computer tool to optimize overlapping of design activities in construction projects. PhD thesis, University of Calgary, Canada.

Deng, X; Low, S P; Zhao, X and Chang, T (2018) Identifying micro variables contributing to political risks in international construction projects. Engineering, Construction and Architectural Management, 25(3), pp. 317-334. ISSN 0969-9988

Denny-Smith, G; Loosemore, M; Barwick, D; Sunindijo, R and Piggott, L (2019) Decolonising indigenous social impact research using community-based methods. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Deshpande, A S; Salem, O M and Miller, R A (2012) Analysis of the higher-order partial correlation between CII best practices and performance of the design phase in fast-track industrial projects. Journal of Construction Engineering and Management, 138(6), pp. 716-724. ISSN 0733-9364

Dharmapalan, V; O'Brien, W J; Morrice, D and Jung, M (2021) Assessment of visibility in industrial construction projects: A viewpoint from supply chain stakeholders. Construction Innovation, 21(4), pp. 782-799. ISSN 1471-4175

Dharmapalan, Vineeth (2021) Supply chain visibility for industrial construction projects: Assessment of benefits, current status, definitions, barriers, and enablers. PhD thesis, University of Texas at Austin, USA.

Dike, I (2017) A critical exploration of the impact of building information modelling on the culture and performance of UK construction supply chains. PhD thesis, Coventry University, UK.

Doan, D T; Mai, T P A; GhaffarianHoseini, A; GhaffarianHoseini, A and Naismith, N (2025) A review of the current state and future trends in modern methods of construction research. Construction Innovation, 25(6), pp. 1821-1839. ISSN 1471-4175

Dong, S (2012) A single element based modeling approach for simulating construction operations. PhD thesis, University of Nebraska - Lincoln, USA.

Du, Y; Yuan, J; Wang, S; Liu, Y and Zeng, N (2025) Leveraging blockchain to anchor information for supervision in PPP projects: A conceptual framework. Engineering, Construction and Architectural Management, 32(4), pp. 2745-2770. ISSN 0969-9988

Ebekozien, A and Aigbavboa, C (2022) Evaluation of built environment programmes accreditation in the 21st century education system in Nigeria: Stakeholders' perspective. International Journal of Building Pathology and Adaptation, 41(6), pp. 102-118. ISSN 23984708

Edum-Fotwe, F T; Thorpe, A; McCaffer, R and Price, A D F (1997) Developing construction management research: A balance of perspectives. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Ekanayake, E M A C and Sandanayake, Y G (2017) Live approach: Lean integrated value engineering for construction industry. Built Environment Project and Asset Management, 7(5), pp. 518-533. ISSN 2044-124X

Elias, R; Issa, R R A and Wu, W (2023) Progress on building information modeling education and talent acquisition. International Journal of Construction Education and Research, 19(4), pp. 363-382. ISSN 1557-8771

Elliott, J W; Glick, S and Valdes-Vasquez, R (2019) Student perceptions of model-based estimating. International Journal of Construction Education and Research, 15(2), pp. 118-135. ISSN 1557-8771

Emmer, M J (2009) A decision process model for closing the structural steel materials loop in construction. PhD thesis, University of Florida, USA.

Essiet, U M (2016) Developing a framework to facilitate the assessment of asset management information quality in facilities management operations. PhD thesis, University of Huddersfield, UK.

Fadoul, A (2020) A BIM-based model for constructability assessment of buildings design. PhD thesis, University of Nottingham, UK.

Farmer, C M (2018) Constructing program management offices for major defense acquisition programs: Factors to consider. DEng thesis, George Washington University, USA.

Fernando, A; Siriwardana, C; Law, D; Gunasekara, C; Zhang, K and Gamage, K (2026) A scoping review and analysis of green construction research: A machine learning aided approach. Smart and Sustainable Built Environment, 15(1), pp. 62-91. ISSN 2046-6099

Fernando, N; Jayathilake, P; De Silva, M; Gunathilake, W; Devapura, N and Wise, B (2024) Built environment stakeholders and climate change adaptation: the case of Sri Lanka. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 636-648. ISSN 1759-5916

Firmenich, J (2017) Customisable framework for project risk management. Construction Innovation, 17(1), pp. 68-89. ISSN 1471-4175

Fortune, C and Hinks, J (1998) Strategic building project price forecasting models in use: Paradigm shift postponed. Journal of Financial Management of Property and Construction, 3(1), pp. 5-26. ISSN 1366-4387

Francis, Matthew Charles (2020) Assessing impact of the built environment on academic research productivity. PhD thesis, RMIT University, Australia.

Galloway, P D (2006) Comparative study of university courses on critical-path method scheduling. Journal of Construction Engineering and Management, 132(7), pp. 712-722. ISSN 0733-9364

Ganah, A A M; Pye, A and Hall, G (2008) The role of knowledge transfer in sustainability research in the built environment discipline. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Gerbov, A; Singh, V and Herva, M (2018) Challenges in applying design research studies to assess benefits of BIM in infrastructure projects: Reflections from Finnish case studies. Engineering, Construction and Architectural Management, 25(1), pp. 2-20. ISSN 0969-9988

Ghadiminia, N (2021) Integration of cybersecurity in BIM-enabled facilities management organisations. PhD thesis, Birmingham City University, UK.

Ghansah, F A and Lu, W (2023) Responses to the COVID-19 pandemic in the construction industry: A literature review of academic research. Construction Management and Economics, 41(9), pp. 781-803. ISSN 01446193

Ghansah, F A and Lu, W (2025) Managerial framework for quality assurance of cross-border construction logistics and supply chain during pandemic and post-pandemic: Lessons from COVID-19 in the world’s factory. Engineering, Construction and Architectural Management, 32(5), pp. 3007-3056. ISSN 0969-9988

Gholami Bavil Olyai, Farshid (2018) A framework for enhancing engineering deliverables to improve construction performance in oil and gas projects. PhD thesis, University of Calgary, Canada.

Gibson, G E and Whittington, D A (2010) Charrettes as a method for engaging industry in best practices research. Journal of Construction Engineering and Management, 136(1), pp. 66-75. ISSN 0733-9364

Goel, A (2025) Construction management students' perception of BIM adoption and its implications in a non-mandated country. International Journal of Construction Management, 25(3), pp. 278-288. ISSN 1562-3599

Gomez, C P (2002) A study of the situated practice of benchmarking in the UK construction industry. PhD thesis, University of Birmingham, UK.

Gonzalez-Quevedo, A A; Abourizk, S M; Iseley, D T and Halpin, D W (1993) Comparison of two simulation methodologies in construction. Journal of Construction Engineering and Management, 119(3), pp. 573-589. ISSN 0733-9364

Gonzalez-Ruiz, J D; Arboleda, A; Botero, S and Rojo, J (2019) Investment valuation model for sustainable infrastructure systems: Mezzanine debt for water projects. Engineering, Construction and Architectural Management, 26(5), pp. 850-884. ISSN 0969-9988

Govender, N; Laryea, S and Watermeyer, R (2025) Blueprint to success: Project managers' perspectives on key factors influencing construction document quality in South Africa. Journal of Construction Engineering and Management, 151(11): 05025015, ISSN 0733-9364

Graham, B and Thomas, K (2007) The development of an integrated knowledge management model for construction. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Gulati, Richa (2021) Necessity of soft skills for project managers and the contribution to project success. PhD thesis, University of Adelaide, Australia.

Gunatilake, S and Liyanage, C (2010) Harmonizing sustainable construction policy with practice at project level: A research proposition. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Gupta, R; Gregg, M; Manu, S; Vaidya, P and Dixit, M (2019) Customized performance evaluation approach for Indian green buildings. Building Research & Information, 47(1), pp. 56-74. ISSN 0961-3218

Hadiwattege, C; Senaratne, S; Sandanayake, Y and Fernando, N G (2018) Academic research in emerging knowledge-based economies: The case of Sri Lankan construction industry. Built Environment Project and Asset Management, 8(4), pp. 415-428. ISSN 2044-124X

Hadiwattege, C; Senaratne, S; Sandanayake, Y G and Fernando, N (2022) Merging academic research and industry requirements for innovative construction management practices in Sri Lanka: A study on critical success factors. International Journal of Construction Education and Research, 18(1), pp. 32-48. ISSN 1557-8771

Hairstans, R and Smith, R E (2018) Offsite hub (Scotland): Establishing a collaborative regional framework for knowledge exchange in the UK. Architectural Engineering and Design Management, 14(1-2), pp. 60-77. ISSN 1745-2007

Halfawy, M M R (1998) A multi-agent collaborative framework for concurrent design of constructed facilities. PhD thesis, Ohio State University, USA.

Hampton, P (2016) Influencing the undergraduate built environment curricula through stakeholder understandings of built environment employability skills. DProf thesis, Middlesex University, UK.

Hasanzadeh, S and Esmaeili, B (2022) Influence of best value procurement on design-build projects: A grounded theory study. International Journal of Construction Education and Research, 18(3), pp. 270-292. ISSN 1557-8771

Hatami, N and Rashidi, A (2025) Enhancing the adoption of building information modeling in the Iranian AEC sector: Insights from a Delphi study. Engineering, Construction and Architectural Management, 32(2), pp. 847-869. ISSN 0969-9988

He, X; Liu, R and Anumba, C J (2021) Data-driven insights on the knowledge gaps of conceptual cost estimation modeling. Journal of Construction Engineering and Management, 147(2): 04020165, ISSN 0733-9364

Heuvel, C (2022) Practice and community: Reconciling architectural practice development with involvement in community engagement projects. PhD thesis, Nottingham Trent University, UK.

Heylighen, A; Martin, W M and Cavallin, H (2007) Building stories revisited: Unlocking the knowledge capital of architectural practice. Architectural Engineering and Design Management, 3(1), pp. 65-74. ISSN 1745-2007

Heylighen, A; Neuckermans, H; Casaer, M and Dewulf, G P M (2007) Building memories. Building Research & Information, 35(1), pp. 90-100. ISSN 0961-3218

Holt, G D and Edwards, D J (2014) Machinery transportation management: Case study of "plant-trailer" H&S incidents. Built Environment Project and Asset Management, 4(3), pp. 264-280. ISSN 2044-124X

Hopkin, T; Lu, S L; Sexton, M and Rogers, P (2019) Learning from defects in the UK housing sector using action research: A case study of a housing association. Engineering, Construction and Architectural Management, 26(8), pp. 1608-1624. ISSN 0969-9988

Hosseini, M R; Chileshe, N; Zuo, J and Baroudi, B (2015) Adopting global virtual engineering teams in AEC projects: A qualitative meta-analysis of innovation diffusion studies. Construction Innovation, 15(2), pp. 151-179. ISSN 1471-4175

Huang, X (2012) Estimating the cost of engineering services using parametrics and the bathtub failure model. PhD thesis, University of Bath, UK.

Hui, E C M; Liang, C; Wang, Z; Song, B T and Gu, Q (2012) Real estate bubbles in China: A tale of two cities. Construction Management and Economics, 30(11), pp. 951-961. ISSN 1466433X

Hui, E C M; Lo, T K K; Chen, J and Wang, Z (2012) Housing and consumer markets in urban China. Construction Management and Economics, 30(2), pp. 117-131. ISSN 1466433X

Hwang, B G; Zhao, X and Yang, K W (2019) Effect of BIM on rework in construction projects in Singapore: Status quo, magnitude, impact, and strategies. Journal of Construction Engineering and Management, 145(2): 04018125, ISSN 0733-9364

Ibbs, C W (1986) Future directions for computerized construction research. Journal of Construction Engineering and Management, 112(3), pp. 326-345. ISSN 0733-9364

Inyang, E D (1983) Some aspects of risk analysis for decision making in engineering projects management. PhD thesis, University of Manchester, UK.

Jang, Y; Kim, K; Leite, F; Ayer, S and Cho, Y K (2021) Identifying the perception differences of emerging construction-related technologies between industry and academia to enable high levels of collaboration. Journal of Construction Engineering and Management, 147(10): 06021004, ISSN 0733-9364

Jayasuriya, Sajani (2018) A systematic stakeholder management framework for managing public private partnership projects in Australia. PhD thesis, RMIT University, Australia.

Jin, R (2013) A statistical modeling approach to studying the effects of alternative and waste materials on green concrete properties. PhD thesis, Ohio State University, USA.

Ju, L; Ji, Y P; Wu, C; Ning, X and He, Y (2024) Relationship between abusive supervision and workers' well-being in construction projects: Effects of guanxi closeness and trust in managers. Engineering, Construction and Architectural Management, 31(8), pp. 3429-3451. ISSN 0969-9988

Kaggiah, G M B (2022) Strategies for improving the sustainability of SMEs in the construction industry in Malawi. PhD thesis, University of Bolton, UK.

Karampour, B; Mohamed, S; Karampour, H and Spagnolo, S L (2021) Formulating a strategic plan for BIM diffusion within the AEC Italian industry: The application of diffusion of innovation theory. Journal of Construction in Developing Countries, 26(1), pp. 161-184. ISSN 1823-6499

Keraminiyage, K P (2009) Achieving high process capability maturity in construction organisations. PhD thesis, University of Salford, UK.

Kian Manesh Rad, E (2016) Development of a project complexity assessment method for energy megaprojects. PhD thesis, Heriot-Watt University, UK.

Kismet, B and Colakoglu, M B (2026) Developing a building-scale circularity indicator through fuzzy analytical hierarchy process and gini index-based circularity calculation methods. International Journal of Construction Management, 26(6), pp. 994-1016. ISSN 1562-3599

Koch, C and Thuesen, C (2002) Knowledge management in contractors: Developing communities of practice to support the re-use of knowledge. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Kong, Z; Ma, H; Lv, K and Shi, J J (2023) Liability of foreignness in public-private partnership projects. Journal of Construction Engineering and Management, 149(9): 04023085, ISSN 0733-9364

Kumaraswamy, M M; Miller, C J; Rahman, M M; Pickernell, D G; Ng, S T and Wong, I P Y (2006) Developing web-based tools for teaching, training, learning and development: The role of academic institutions. Architectural Engineering and Design Management, 2(1-2), pp. 123-135. ISSN 1745-2007

Langar, S; Mosier, R and Adhikari, S (2023) Perceptions and pedagogical responses of construction educators during COVID-19. International Journal of Construction Education and Research, 19(4), pp. 405-425. ISSN 1557-8771

Lavikka, R; Seppänen, O; Peltokorpi, A and Lehtovaara, J (2020) Fostering process innovations in construction through industry–university consortium. Construction Innovation, 20(4), pp. 569-586. ISSN 1471-4175

Lee, J H (2004) Object-based learning method in civil engineering. PhD thesis, Purdue University, USA.

Lees, M A (2009) Measuring the value of engagement between higher education and industry and practice in the built environment. PhD thesis, University of Salford, UK.

Lehtovaara, J; Seppänen, O; Peltokorpi, A; Kujansuu, P and Grönvall, M (2021) How Takt production contributes to construction production flow: A theoretical model. Construction Management and Economics, 39(1), pp. 73-95. ISSN 01446193

Li, N and Becerik-Gerber, B (2011) Life-cycle approach for implementing RFID technology in construction: Learning from academic and industry use cases. Journal of Construction Engineering and Management, 137(12), pp. 1089-1098. ISSN 0733-9364

Li, T; Li, Z and Dou, Y (2023) Diffusion prediction of prefabricated construction technology under multi-factor coupling. Building Research & Information, 51(3), pp. 333-353. ISSN 0961-3218

Lindblad, H (2019) Black boxing BIM: The public client's strategy in BIM implementation. Construction Management and Economics, 37(1), pp. 1-12. ISSN 01446193

Littke, H (2016) Becoming biophilic: Challenges and opportunities for biophilic urbanism in urban planning policy. Smart and Sustainable Built Environment, 5(1), pp. 15-24. ISSN 2046-6099

Liu, J (2005) Organisational learning of risk management for Chinese contractors. PhD thesis, University of Reading, UK.

Liu, J; Wang, Y and Du, X (2025) The impact of autonomy on sustainable performance in foreign subsidiaries: An empirical study from Chinese construction industry. Engineering, Construction and Architectural Management, 32(2), pp. 1370-1391. ISSN 0969-9988

Liu, Y (2021) From best practices to next practices: project-based learning in the development of large infrastructure. PhD thesis, Delft University of Technology, Netherlands.

Lohne, J; Torp, O; Andersen, B; Aslesen, S; Bygballe, L; Bølviken, T; Drevland, F; Engebø, A; Fosse, R; Holm, H T; Hunn, L K; Kalsaas, B T; Klakegg, O J; Knotten, V; Kristensen, K H; Olsson, N O E; Rolstadås, A; Skaar, J; Svalestuen, F; Vaagen, H; Wondimu, P and Laedre, O (2022) The emergence of lean construction in the Norwegian AEC industry. Construction Management and Economics, 40(7-8), pp. 585-597. ISSN 01446193

Lu, M (2000) Productivity studies using advanced ANN models. PhD thesis, University of Alberta, Canada.

Lucko, G and Kaminsky, J A (2016) Construction engineering conference and workshop 2014: Setting an industry-academic collaborative research agenda. Journal of Construction Engineering and Management, 142(4): 04015096, ISSN 0733-9364

Lundrigan, C (2016) Megaprojects: A design and strategy perspective. PhD thesis, University of Manchester, UK.

Ma, J (2016) A data driven study on LEED credits and green building related implications in city planning. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Ma, S; Li, Z; Li, L; Zhang, S and Zheng, R (2024) Deciphering the key characteristics of on-site industrialized construction: Inspiration from China. Journal of Construction Engineering and Management, 150(4): 05024003, ISSN 0733-9364

Madushika, U G D and Lu, W (2026) Policy strategies for green retrofitting adoption: A systematic review and future directions. International Journal of Construction Management, 26(5), pp. 805-824. ISSN 1562-3599

Mak, Wae Hoa Jonathan (2019) The design of resilient engineering infrastructure systems. PhD thesis, University of Cambridge, UK.

Mandujano Rodríguez, M G (2016) A method to identify virtual design and construction implementation strategies from a lean construction perspective. DEng thesis, Pontificia Universidad Catolica de Chile, Chile.

Maqsood, T; Walker, D H T and Finegan, A D (2007) Facilitating knowledge pull to deliver innovation through knowledge management: A case study. Engineering, Construction and Architectural Management, 14(1), pp. 94-109. ISSN 0969-9988

Marinelli, M and Salopek, M (2020) Joint risk management and collaborative ethos: Exploratory research in the UK construction sector. Journal of Engineering, Design and Technology, 18(2), pp. 343-361. ISSN 1726-0531

Masitenyane, L A (2020) Dimensions and outcomes of buyer-seller relationship intentions for concrete products in the construction environment. DTech thesis, Vaal University of Technology, South Africa.

Mastrolembo Ventura, Silvia (2019) The role of virtual reality in digitally-enabled design review: Procedural guidelines for the effective implementation of immersive virtual environments for usability-focused analysis. PhD thesis, Politecnico di Milano, Italy.

Mavroudhis, V G (2017) Understanding one institutions' process in preparing civil engineering students to be globally competent. EdD thesis, Northeastern University, USA.

Maxwell, Duncan William (2018) The case for design-value in industrialised house building platforms: Product to ecosystem. PhD thesis, University of Sydney, Australia.

McCord, K H; Ayer, S K; Lamanna, A J; Eicher, M; London, J S and Wu, W (2023) Construction education needs derived from industry evaluations of students and academic research publications. International Journal of Construction Education and Research, 19(1), pp. 77-98. ISSN 1557-8771

McCoy, A P; Saunders, L; Kleiner, B and Blismas, N (2012) Application of safety project interview data to a cyclical research model of translation. International Journal of Construction Education and Research, 8(4), pp. 260-280. ISSN 1557-8771

McElroy, L B (2009) Embedding integrated building performance assessment in design practice. PhD thesis, University of Strathclyde, UK.

McNamara, E T; Howarth, T A P; Hill, C J and Stoneman, G R W (1997) Mentoring construction graduates: Bridging the gap between academia and industry. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

McRobert, Alexandra Aimee (2021) Holistic housebuilding: Towards a framework for improving housing affordability. PhD thesis, Monash University, Australia.

Meng, C; Qu, D and Lei, T (2025) Compliance risk formation and evolution mechanisms of the international operations of construction enterprises. Journal of Construction Engineering and Management, 151(11): 04025180, ISSN 0733-9364

Mian, Daniyal (2015) A model to assess the impact of innovation activity on project performance in consulting engineering firms. PhD thesis, Queensland University of Technology, Australia.

Mihara, H; Kurokawa, M; Hughes, W P and Hojo, T (2014) The comparison of construction management curricula in universities between the UK and Japan. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Moghayedi, A. and Awuzie, B. (2026) Unlocking sustainability futures: A framework for digital product passports and material banks in a circular built environment. Construction Innovation, 26(9), pp. 135-166. ISSN 1471-4175

Mollasalehi, S (2022) The benefits of BIM use to improve information flow: making the design process more leaner. PhD thesis, University of Salford, UK.

Moore, J D (2006) Women in construction management: Creating a theory of career choice and development. PhD thesis, Colorado State University, USA.

Moore, J D and Plugge, P W (2008) Perceptions and expectations: Implications for construction management internships. International Journal of Construction Education and Research, 4(2), pp. 82-96. ISSN 1557-8771

Myrvang, R and Liu, C Y A (2025) Beyond traditional methods: Enhancing cost escalation forecasting in commercial construction amid economic turbulence. Journal of Construction Engineering and Management, 151(2): 04024201, ISSN 0733-9364

Nadim, W (2009) Industrialising the construction industry: a collaborative training and education model. PhD thesis, University of Salford, UK.

Nadim, W and Goulding, J S (2009) Offsite production in the UK: The construction industry and academia. Architectural Engineering and Design Management, 5(3), pp. 136-152. ISSN 1745-2007

Naveed, M H; Thaheem, M J; Khurshid, M B and Farooqui, R U H (2017) Performance assessment of construction engineering and management degree program in developing countries: Case of Pakistan. International Journal of Construction Education and Research, 13(1), pp. 3-23. ISSN 1557-8771

Neve, H H; Wandahl, S; Kaeseler, S M and Tandrup, A (2017) Integrating IPD and exploring potentials. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Nissanka, S C; Malalgoda, C I; Amaratunga, D and Haigh, R (2024) Role of the built environment stakeholders in climate change adaptation. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 649-667. ISSN 1759-5916

Nor, F M and Egbu, C (2010) An insight into knowledge sharing practices in quantity surveying firms in Malaysia. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Ogunbayo, O T (2019) Respondents' perception of risk factors on residential property development in Abuja, Nigeria. Journal of Construction Business and Management, 3(1), pp. 18-26. ISSN 2521-0165

Okon, B B (2013) Sustainable building services systems management. PhD thesis, University College London, UK.

Okpala, I; Nnaji, C and Gambatese, J (2023) Assessment tool for human-robot interaction safety risks during construction operations. Journal of Construction Engineering and Management, 149(1): 04022145, ISSN 0733-9364

Olatokun, E O (2017) Requirement elicitation using knowledge capturing techniques during the client briefing process for improved client satisfaction in the UK construction industry. PhD thesis, University of Salford, UK.

Olatokun, E O (2017) Requirement elicitation using knowledge capturing (kc) techniques during the client briefing process for improved client satisfaction in the UK construction industry. PhD thesis, University of Salford, UK.

Olukanni, E; Akanmu, A; Jebelli, H and Terreno, S (2024) Competencies for human-robot collaboration in the construction industry–academia’s perspective. International Journal of Construction Education and Research, 20(4), pp. 444-463. ISSN 1557-8771

Osei-Tutu, S; Ayarkwa, J; Nani, G; Osei-Asibey, D and Abu, I M A (2025) Stakeholders' role towards circular economy implementation: A scientometric review. Construction Innovation, 25(6), pp. 1633-1656. ISSN 1471-4175

Osorio-Sandoval, C A (2021) BIM-based construction simulation modelling. PhD thesis, University of Nottingham, UK.

Ozbek, M E and Clevenger, C M (2017) Collaboration in construction academia. Journal of Construction Engineering and Management, 143(9): 02517002, ISSN 0733-9364

Ozols, R S (2015) A strategic framework to aid the success of small and micro sized UK construction contractors. DProf thesis, University of Salford, UK.

O’Neill, T; Hartigan, K and Spillane, J P (2024) Factors inhibiting higher education institutions from addressing industry driven change in Irish construction management programs. International Journal of Construction Education and Research, 20(1), pp. 65-82. ISSN 15578771

Palaneeswaran, E and Kumaraswamy, M M (2003) Knowledge mining of information sources for research in construction management. Journal of Construction Engineering and Management, 129(2), pp. 182-191. ISSN 0733-9364

Palos, S; Kiviniemi, A and Kuusisto, J (2014) Future perspectives on product data management in building information modeling. Construction Innovation, 14(1), pp. 52-68. ISSN 1471-4175

Park, H S; Thomas, S R and Tucker, R L (2005) Benchmarking of construction productivity. Journal of Construction Engineering and Management, 131(7), pp. 772-778. ISSN 0733-9364

Park, H-S (2002) Development of a construction productivity metrics system (CPMS). PhD thesis, University of Texas at Austin, USA.

Paulson, B C (2003) Design and construction for the rest of us. Journal of Construction Research, 4(2), pp. 115-127. ISSN 1609-9451

Pekuri, A; Pekuri, L and Haapasalo, H (2013) The role of business models in Finnish construction companies. Construction Economics and Building, 13(3), pp. 13-23. ISSN 2204-9029

Perreira, A and Rankin, J H (2015) Adoption of knowledge management by Canadian housing charities. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 168(2), pp. 76-88. ISSN 17514304

Pidgeon, A and Dawood, N (2023) Verification and validation of a framework for collaborative BIM implementation, measurement and management (cimm). Smart and Sustainable Built Environment, 12(4), pp. 847-871. ISSN 2046-6099

Pillai, S (2022) Regulation of artificial intelligence technologies in the Indian construction industry. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Powell, A (2009) The (un)balancing act: The impact of culture on women engineering students' gendered and professional identities. PhD thesis, Loughborough University, UK.

Powell, A; Hassan, T M; Dainty, A R J and Carter, C (2009) Exploring gender differences in construction research: A European perspective. Construction Management and Economics, 27(9), pp. 803-807. ISSN 1466433X

Priest, P (2024) From compliance to care: Shaping modern slavery competency in architectural professional practice. PhD thesis, Royal College of Art, UK.

Priven, V and Sacks, R (2016) Impacts of the social subcontract and last planner system interventions on the trade-crew workflows of multistory residential construction projects. Journal of Construction Engineering and Management, 142(7): 4016013, ISSN 0733-9364

Putri, A T; Chan, T K; Soemardi, B and Abduh, M (2026) Evaluating the quality of publicly available construction technology data in Indonesia. Construction Economics and Building, 26(1), ISSN 2204-9029

Qi, J K; Yang, J Y; Oliver Hoon Leh, L; Edwards, R and Jamalunlaili, A (2021) Thermal comfort prediction of air-conditioned and passively cooled engineering testing centres in a higher educational institution using CFD. Smart and Sustainable Built Environment, 10(1), pp. 18-36. ISSN 2046-6099

Quintana, F C (2016) Cybersecurity capabilities in a critical infrastructure sector of a developing nation. PhD thesis, Carnegie Mellon University, USA.

Rachid, Ali Hassan (2021) Development of a framework to support embedding BIM within undergraduate architectural programmes in Lebanon. PhD thesis, University of Salford, UK.

Raidén, A B; Räisänen, C and Caven, V (2012) Juggling work, family ... and life in academia: The case of the "new" man. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Ranasinghe, U; Ruwanpura, J and Liu, X (2012) Streamlining the construction productivity improvement process with the proposed role of a construction productivity improvement officer. Journal of Construction Engineering and Management, 138(6), pp. 697-706. ISSN 0733-9364

Rauf, A; Shafiq, M T; Khalfan, M M A and Ulhaq, I (2024) Sustainable water management in construction: Life-cycle embodied water assessment of residential buildings. Built Environment Project and Asset Management, 14(5), pp. 682-696. ISSN 2044-124X

Rawlinson, F and Farrell, P (2010) UK construction industry site health and safety management: An examination of promotional web material as an indicator of current direction. Construction Innovation, 10(4), pp. 435-446. ISSN 1471-4175

Rigby, E T; McCoy, A P and Garvin, M J (2012) Toward aligning academic and industry understanding of innovation in the construction industry. International Journal of Construction Education and Research, 8(4), pp. 243-259. ISSN 1557-8771

Rodriguez Diaz, C R (2012) Development of a framework and a rating system tool, for sustainable infrastructure certification in developing countries, case study for Ecuador. PhD thesis, University of Florida, USA.

Rodríguez-Labajos, L; Thomson, C S and O’Brien, G (2021) Applying constructivist grounded theory in co-production research: A case study exploring its potential and lessons for construction management research. Construction Management and Economics, 39(5), pp. 369-382. ISSN 01446193

Rotimi, F E; Brauner, M; Naismith, N; Burfoot, M and Mohaghegh, M (2025) Coping strategies and resilience of New Zealand tradeswomen in construction: Navigating challenges. Building Research & Information, 53(7), pp. 871-891. ISSN 0961-3218

Sadiq, M and Khalfan, M M A (2025) Transitioning to a circular economy in the construction demolition industry: A bibliometric analysis. Built Environment Project and Asset Management, 15(3), pp. 518-534. ISSN 2044-124X

Saini, M (2015) A framework for transferring and sharing tacit knowledge in construction supply chains within lean and agile processes. PhD thesis, University of Salford, UK.

Samuelsson, P (2006) Integrated measurement and assessment of performance in large organizations: The case of a Swedish construction company. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Saraiva, T S (2020) Adaptation of the methodology SBTool for sustainability assessment of high school buildings in Portugal - SAHSBPT. PhD thesis, Universidade do Minho, Portugal.

Schultz, C S; Jørgensen, K; Bonke, S and Rasmussen, G M G (2015) Building defects in Danish construction: Project characteristics influencing the occurrence of defects at handover. Architectural Engineering and Design Management, 11(6), pp. 423-439. ISSN 1745-2007

Scott, L and Kanjanabootra, S (2018) The acquisition of knowledge and expertise in construction: Understanding construction professionals. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Sexton, M and Lu, S L (2009) The challenges of creating actionable knowledge: An action research perspective. Construction Management and Economics, 27(7), pp. 683-694. ISSN 1466433X

Shakantu, M W (2004) An investigation into building material and waste logistics: The case of Cape Town. PhD thesis, Glasgow Caledonian University, UK.

Shang, L (2019) Achieving public agency goals in public-private partnerships using innovative payment mechanisms. PhD thesis, University of Washington, USA.

Shapira, A (1999) Contemporary trends in formwork standards: a case study. Journal of Construction Engineering and Management, 125(2), pp. 69-75. ISSN 0733-9364

Shapira, A; Rosenfeld, Y and Mizrahi, I (2008) Vision system for tower cranes. Journal of Construction Engineering and Management, 134(5), pp. 320-332. ISSN 0733-9364

Sharar, M; Agyekum, K; Manu, P; Che Ibrahim, C K I; Mahamadu, A M; Antwi-Afari, M F and Danso, F O (2024) Design for safety in construction: A study of design professionals in Kuwait. International Journal of Building Pathology and Adaptation, 42(4), pp. 596-617. ISSN 23984708

Sherratt, F; Farrell, P and Noble, R (2012) Inconsistent, incomplete and incidental: Site safety culture from a constructionist perspective. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Shorthouse, E (2015) Climate change and buildings: the impact on human health. PhD thesis, University of Exeter, UK.

Shrivas, A and Singla, H K (2022) Analysis of interaction among the factors affecting delay in construction projects using interpretive structural modelling approach. International Journal of Construction Management, 22(8), pp. 1455-1463. ISSN 1562-3599

Silverio Fernández, M A (2019) Implementation of smart devices in the construction industry. PhD thesis, University of Wolverhampton, UK.

Simpson, K; Janda, K B and Owen, A (2020) Preparing 'middle actors' to deliver zero-carbon building transitions. Buildings & Cities, 1(1), pp. 610-624. ISSN 2632-6655

Simpson, K B and Sam, A (2020) Strategies for health and safety management in Ghana. Journal of Engineering, Design and Technology, 18(2), pp. 431-450. ISSN 1726-0531

Slater, K R and Robinson, J B (2023) Transformational climate actions by cities. Buildings & Cities, 4(1), pp. 74-82. ISSN 2632-6655

Solomon, T (2021) Change blindness in the construction industry. PhD thesis, George Mason University, USA.

Solovyova, I (2008) The role of the autobiographical experiences with emotional significance of an architect in design conjecturing. PhD thesis, Texas A&M University, USA.

Son, J; O'Brien, W J and Thomas, S R (2022) Recommended practices for effective management of academia-industry collaborative research teams in construction management. Journal of Construction Engineering and Management, 148(8): 04022075, ISSN 0733-9364

Son, Junghye (2013) Key process attributes and success factors for collaborative academia-industry research in construction industry project management. PhD thesis, University of Texas at Austin, USA.

Sonet, U N and Shahruddin, S (2024) Identifying barriers for sustainable townscape development: Challenges in Malaysia. Journal of Construction in Developing Countries, 29(2), pp. 19-35. ISSN 1823-6499

Srisuwanrat, C (2009) The sequence step algorithm: A simulation-based scheduling algorithm for repetitive projects with probabilistic activity durations. PhD thesis, University of Michigan, USA.

Staples, C and Spillane, J (2019) Exploring the potential improvement of quality control in the construction industry with the use of digital technology. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Stollmann, J (2016) Neighbourhood resilience in mass housing: Co-production via research-by-design. Building Research & Information, 44(7), pp. 737-753. ISSN 0961-3218

Sun, W; Deng, X; Yu, H; Antwi-Afari, M F and Hwang, B G (2025) A multianalytical approach to identifying influential factors in data sharing among international construction enterprises. Journal of Construction Engineering and Management, 151(11): 04025165, ISSN 0733-9364

Sundaraj, G (2012) The significance and co-dependency of 'robustness' in PFI projects: A granting authority perspective. PhD thesis, University of Salford, UK.

Sundaraj, G and Eaton, D (2011) The anticipated robustness factors in a PFI project environment from the granting authority s perspective. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Suprun, Emiliya (2018) An integrated systems model of construction innovation in the Russian federation. PhD thesis, Griffith University, Russia.

Swenarton, M (2009) Research shortcomings in housing. Building Research & Information, 37(1), pp. 101-105. ISSN 0961-3218

Szabo, E and Sherratt, F (2024) Consistency in its inconsistency: Safety culture in the us construction industry. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Sze, E; Kumaraswamy, M; Fung, A; Palaneeswaran, E and Wong, S (2004) Partnering with the tenants- Hong Kong experience. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Tandon, U; Mittal, A; Bhandari, H and Bansal, K (2022) E-learning adoption by undergraduate architecture students: Facilitators and inhibitors. Engineering, Construction and Architectural Management, 29(10), pp. 4287-4312. ISSN 0969-9988

Tang, L; Griffith, L; Stevens, M and Hardie, M (2020) Social media analytics in the construction industry comparison study between China and the United States. Engineering, Construction and Architectural Management, 27(8), pp. 1877-1889. ISSN 0969-9988

Tao, X (2023) Distributed common data environment for secure BIM-based collaborative design using blockchain technology. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Thakhtravachi, M (2017) Tacit knowledge integration within the traditional construction procurement system. PhD thesis, University of Salford, UK.

Thomas, S R; Lee, S H; Spencer, J D; Tucker, R L and Chapman, R E (2004) Impacts of design/information technology on project outcomes. Journal of Construction Engineering and Management, 130(4), pp. 586-597. ISSN 0733-9364

Tookey, J E; Murray, M; Hardcastle, C and Langford, D (2001) Construction procurement routes: Re-defining the contours of construction procurement. Engineering, Construction and Architectural Management, 8(1), pp. 20-30. ISSN 0969-9988

Tracey, P G (2020) The influence of national culture on the preparation, evaluation and negotiation of claims on international construction projects: a constructivist grounded theory. PhD thesis, University of Salford, UK.

Tripathi, P and Mittal, Y K (2025) Risk assessment and ranking methodology for occupational hazards in construction: A case of Indian high-rise projects. Smart and Sustainable Built Environment, 14(6), pp. 1927-1949. ISSN 2046-6099

Tucker, R R (2014) Influence of individual perceptions on engineering team performance within design-build infrastructure projects. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Tummalapudi, M (2022) Strategic factors for implementing a multiple career path construction doctoral program: A mixed methods study. PhD thesis, Colorado State University, USA.

Turner, T J A (2010) The practice of financial project management in the consulting engineering industry. PhD thesis, University of Phoenix, USA.

Tzortzopoulos, P (2004) The design and implementation of product development process models in construction companies. PhD thesis, University of Salford, UK.

Tzortzopoulos, P and Sexton, M (2007) An investigation on the implementation of product development process models in construction companies. Construction Management and Economics, 25(11), pp. 1153-1164. ISSN 01446193

Tzortzopoulos, P; Sexton, M and Cooper, R (2005) Process models implementation in the construction industry: A literature synthesis. Engineering, Construction and Architectural Management, 12(5), pp. 470-486. ISSN 0969-9988

Ullah, F and Thaheem, M J (2018) Concession period of public private partnership projects: Industry-academia gap analysis. International Journal of Construction Management, 18(5), pp. 418-429. ISSN 1562-3599

Umeokafor, N and Windapo, A (2018) Challenges to and opportunities for establishing a qualitative approach to built environment research in higher education institutions. Journal of Engineering, Design and Technology, 16(4), pp. 557-580. ISSN 1726-0531

Umeokafor, N and Windapo, A O (2018) Understanding the underrepresentation of qualitative research approaches to built environment research in Nigeria. International Journal of Construction Education and Research, 14(3), pp. 198-217. ISSN 1557-8771

Unsal, H I (2010) Modeling the hold-up problem and absorptive capacity of project networks. PhD thesis, Columbia University, USA.

Valdes-Vasquez, R (2011) Social sustainability considerations during planning and design: A framework of processes for construction projects. PhD thesis, Clemson University, USA.

Valdes-Vasquez, R and Klotz, L E (2013) Social sustainability considerations during planning and design: Framework of processes for construction projects. Journal of Construction Engineering and Management, 139(1), pp. 80-89. ISSN 0733-9364

Verma, S; Mandal, S N; Robinson, S; Bajaj, D and Saxena, A (2021) Investment appraisal and financial benefits of corporate green buildings: A developing economy case study. Built Environment Project and Asset Management, 11(2), pp. 392-408. ISSN 2044-124X

Volpe, E (2024) Exploring inclusive spaces for early career women in civil engineering. PhD thesis, University of Florida, USA.

Wadu Mesthrige, J and Kwong, H Y (2018) Criteria and barriers for the application of green building features in Hong Kong. Smart and Sustainable Built Environment, 7(3-4), pp. 251-276. ISSN 2046-6099

Wall, J and Ahmed, V (2004) E-learning & pedagogical challenges in construction management: Bridging the gap between academia and industry. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Wall, J and Ahmed, V (2005) Issues in developing a blended learning initiative to meet continuing professional development needs of construction professionals in Ireland. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Wall, J and Ahmed, V (2007) Blended lifelong learning delivery: Lessons learned from a pilot study. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Wanigarathna N, P A D F A S A (2013) Improvement opportunities for evidence-based design: An application of a critical realist's perspective. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Waterhouse, M and McCabe, S (1999) A critical examination of the concept of 'best practice'. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Wood, A (2006) Demystifying construction: Technology in architectural education. Architectural Engineering and Design Management, 2(1-2), pp. 5-18. ISSN 1745-2007

Wood, H L and Gidado, K (2008) An overview of complexity theory and its application to the construction industry. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Wu, C; Song, X; Wang, T and Fang, D (2015) Core dimensions of the construction safety climate for a standardized safety-climate measurement. Journal of Construction Engineering and Management, 141(8): 04015018, ISSN 0733-9364

Wu, L; Mohamed, E; Jafari, P and Abourizk, S (2023) Machine learning-based Bayesian framework for interval estimate of unsafe-event prediction in construction. Journal of Construction Engineering and Management, 149(11): 04023118, ISSN 0733-9364

Wu, W; Mayo, G; McCuen, T L; Issa, R R A and Smith, D K (2018) Building information modeling body of knowledge. II: Consensus building and use cases. Journal of Construction Engineering and Management, 144(8): 04018066, ISSN 0733-9364

Wu W, I R (2013) Impacts of BIM on talent acquisition in the construction industry. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Yousefzadeh, S; Spillane, J P; Lamont, L; McFadden, J and Lim, J P B (2015) Building information modelling (BIM) software interoperability: A review of the construction sector. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Yue, H; Sun, Y; Zeng, N; Chen, S; Tan, Y and Wang, Q (2025) Legged robots for construction management: Applications and challenges. Journal of Construction Engineering and Management, 151(8): 03125006, ISSN 0733-9364

Yussef, A K (2019) Assessing the maturity and accuracy of front end engineering design (FEED) for large, complex industrial projects. PhD thesis, Arizona State University, USA.

Yusuf, A O; Afolabi, A; Akanmu, A; Murzi, H; Nieto Leal, A; Ball, S and Ofori-Boadu, A (2025) Collaborations between industry and academia for future workforce development: Construction practitioners’ perspective. Engineering, Construction and Architectural Management, 32(5), pp. 3166-3186. ISSN 0969-9988

Zabidin, N S; Belayutham, S and Che Ibrahim, C K I (2024) The knowledge, attitude and practices (KAP) of Industry 4.0 between construction practitioners and academicians in Malaysia: A comparative study. Construction Innovation, 24(5), pp. 1185-1204. ISSN 1471-4175

Zhang, X (2006) Public clients' best value perspectives of public private partnerships in infrastructure development. Journal of Construction Engineering and Management, 132(2), pp. 107-114. ISSN 0733-9364

Zheng, S and Tiong, R L K (2010) First public-private-partnership application in taiwan's wastewater treatment sector: Case study of the nanzih BOT wastewater treatment project. Journal of Construction Engineering and Management, 136(8), pp. 913-922. ISSN 0733-9364

Zhou, Q; Deng, X; Hwang, B G; Mahmoudi, A and Liu, Y (2023) Integrating the factors affecting knowledge transfer within international construction projects: Individual and team perspectives. Journal of Construction Engineering and Management, 149(11): 04023117, ISSN 0733-9364

Zin, I N M and Egbu, C (2010) Readiness of organizations to implement a knowledge management strategy: A construction industry overview. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Zulu, S L; Saad, A; Ajayi, S; Unuigbe, M and Dulaimi, M (2024) A thematic analysis of the organisational influences on digitalisation in construction firms. Journal of Engineering, Design and Technology, 22(6), pp. 1755-1772. ISSN 1726-0531

Zuo, J; Jin, X H and Flynn, L (2012) Social sustainability in construction: an explorative study. International Journal of Construction Management, 12(2), pp. 51-63. ISSN 1562-3599

de Souza, M P; Fialho, B C; Ferreira, R C; Fabricio, M M and Codinhoto, R (2023) Modelling and coordination of building design: An experience of BIM learning/upskilling. Architectural Engineering and Design Management, 19(1), pp. 74-91. ISSN 1745-2007

van Nguyen, M V; Khanh, K D and Nguyen, T T (2025) Developing a climate for innovation index for architectural design firms. Engineering, Construction and Architectural Management, 32(9), pp. 6161-6186. ISSN 0969-9988