Items with Descriptive Scope: 5 PCTEA

A Kassem, M; Khoiry, M A and Hamzah, N (2020) Assessment of the effect of external risk factors on the success of an oil and gas construction project. Engineering, Construction and Architectural Management, 27(9), pp. 2767-2793. ISSN 0969-9988

Ab Rani, N I; Ismail, S; Mohamed, Z; Hussain, A H and Ghafourian, K (2018) Local contractors' awareness on competitiveness towards liberalisation and globalisation in the Malaysian construction industry. Journal of Construction in Developing Countries, 23(1), pp. 21-42. ISSN 1823-6499

Ababio, B K; Lu, W and Ghansah, F A (2023) Transitioning from green to circular procurement in developing countries: A conceptual framework for Ghana's construction sector. Building Research & Information, 51(7), pp. 798-815. ISSN 0961-3218

Ababutain, A Y (2002) A multi-criteria decision-making model for selection of BOT toll road proposals within the public sector. PhD thesis, University of Pittsburgh, USA.

Abad, F; Rameezdeen, R and Chileshe, N (2026) Understanding barriers to circular economy design in mass timber construction: An innovation diffusion theory perspective. Engineering, Construction and Architectural Management, 33(15), pp. 22-46. ISSN 0969-9988

Abadi, Ayda (2014) A study of innovation perception within the construction industry. PhD thesis, University of Manchester, UK.

Abadi, M (2005) Issues and challenges in communication within design teams in the construction industry: Investigation the use of virtual teams and information and communication technologies in the UK construction industry. PhD thesis, University of Manchester, UK.

Abadi, M and Sammuneh, M A (2020) Integrating circular economy and constructability research: An initial development of a lifecycle "circularity" assessment framework and indicators. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Abadou, Y; Ghrieb, A; Bustamante, R and Faid, H (2020) Optimization by mixture design approach: Impact of marble and ceramic recycle on properties of mortar based on air lime. Journal of Engineering, Design and Technology, 18(6), pp. 1731-1747. ISSN 1726-0531

Abanda, F H (2011) Knowledge modelling of emerging technologies for sustainable building development. PhD thesis, Oxford Brookes University, UK.

Abankwa, Derek Asante (2021) What drives technology adaptation in construction firms? An investigation of the antecedents, adaptive behaviours, and outcomes. PhD thesis, University of Hong Kong, Hong Kong.

Abas, N H; Blismas, N and Lingard, H (2021) Development of risk assessment tool using damaging energy and argumentation theory for evaluating construction occupational safety and health risks. Engineering, Construction and Architectural Management, 28(10), pp. 2967-2993. ISSN 0969-9988

Abaza, M and Kisi, K (2024) Improper risk management outcomes and lessons learned from an EPC water transmission project. Journal of Construction Engineering and Management, 150(11): 05024012, ISSN 0733-9364

Abbas, G M and Gursel Dino, I (2022) The impact of natural ventilation on airborne biocontaminants: A study on COVID-19 dispersion in an open office. Engineering, Construction and Architectural Management, 29(4), pp. 1609-1641. ISSN 0969-9988

Abbas, N M A (1998) The impact of construction contract models on construction claims in Saudi Arabia. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Abbasi, Mostafa (2017) Enhance the construction industry performance through lean applications. PhD thesis, Politecnico di Milano, Italy.

Abbasian-Hosseini, S A (2015) Social and engineering aspects of construction site management using simulation and social network analysis. PhD thesis, North Carolina State University, USA.

Abbasian-Hosseini, S A; Hsiang, S M; Leming, M L and Liu, M (2014) From social network to data envelopment analysis: Identifying benchmarks at the site management level. Journal of Construction Engineering and Management, 140(8): 04014028, ISSN 0733-9364

Abbasianjahromi, H and Talebian, R (2021) Identifying the most important occupational diseases in the construction industry: Case study of building industry in Iran. International Journal of Construction Management, 21(3), pp. 235-245. ISSN 1562-3599

Abbasnejad, B; Nasirian, A; Duan, S; Diro, A; Prasad Nepal, M and Song, Y (2024) Measuring BIM implementation: A mathematical modeling and artificial neural network approach. Journal of Construction Engineering and Management, 150(5): 04024032, ISSN 0733-9364

Abdalla, A; Li, X; Yang, F and Lou, Q (2026) Fuzzy synthetic evaluation of intervention measures to enhance the psychological health and well-being of expatriate construction professionals. Engineering, Construction and Architectural Management, 33(1), pp. 732-762. ISSN 0969-9988

Abdalla, A; Li, X and Yang, F (2025) Stressors and job burnout of Chinese expatriate construction professionals. Engineering, Construction and Architectural Management, 32(2), pp. 705-731. ISSN 0969-9988

Abdalla, A; Li, X; Yang, F and Cao, X (2025) Mental health and well-being in international construction projects: Systematic review of antecedents, constructs, and outcomes. Journal of Construction Engineering and Management, 151(10): 04025153, ISSN 0733-9364

Abdalla, S B; Mushtaha, E; Rashid, M; Opoku, A; Hamad, R; Dweiri, F and Elmualim, A (2023) Pre-design CSFs (critical success factors) of building projects for dubai's development boom. Built Environment Project and Asset Management, 13(3), pp. 359-374. ISSN 2044-124X

Abdallah, A; Doloi, H and Holzer, D (2023) Exploring the application of BIM in tanzanian public sector projects using social network analysis. Built Environment Project and Asset Management, 13(4), pp. 552-573. ISSN 2044-124X

Abdallah, A; Doloi, H and Holzer, D (2025) Exploring contextual issues impacting delivery and performance of public sector construction projects in Tanzania. Built Environment Project and Asset Management, 15(2), pp. 228-246. ISSN 2044-124X

Abdallah, A M (2021) A study on bridge inspections: Identifying barriers to new practices and providing strategies for change. PhD thesis, Colorado State University, USA.

Abdel-Galil, E; Ibrahim, A H and Alborkan, A (2022) Assessment of transaction costs for construction projects. International Journal of Construction Management, 22(9), pp. 1618-1631. ISSN 1562-3599

Abdel-Hamid, M and Abdelhaleem, H M (2023) Project cost control using five dimensions building information modelling. International Journal of Construction Management, 23(3), pp. 405-409. ISSN 1562-3599

Abdel-Salam, A N (2018) Corporate social responsibility of construction and real estate development companies in developing countries: An assessment model. PhD thesis, Purdue University, USA.

Abdel-Wahab, M S (2008) An examination of the relationship between skills development and productivity in the construction industry. PhD thesis, Loughborough University, UK.

Abdel-Wahab, M S; Moore, D R; Gibbons-Woods, D; Kearny, G and Pirie, T (2009) An evaluation framework for training: A case study in the northeast of scotland. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Abdelalim, A M; Salem, M; Al-Sabah, R; Said, S O; ElShafei, H M and Galal Badawy, M (2025) Optimizing claim management process groups to enhance construction project success. International Journal of Construction Management, 25(13), pp. 1583-1595. ISSN 1562-3599

Abdelgawad, M A M (2011) Hybrid decision support system for risk criticality assessment and risk analysis. PhD thesis, University of Alberta, Canada.

Abdelgawad, M A M and Fayek, A R (2010) Risk management in the construction industry using combined fuzzy FMEA and fuzzy AHP. Journal of Construction Engineering and Management, 136(9), pp. 1028-1036. ISSN 0733-9364

Abdelgawad, M A M and Fayek, A R (2012) Comprehensive hybrid framework for risk analysis in the construction industry using combined failure mode and effect analysis, fault trees, event trees, and fuzzy logic. Journal of Construction Engineering and Management, 138(5), pp. 642-651. ISSN 0733-9364

Abdelghani, Mohammad (2021) Towards a generalized value stream mapping and domain ontology to support the enabling of industry 4.0 in construction. PhD thesis, University of Alberta, Canada.

Abdelkhalek, Sherif Ibrahim Farag Mohamed (2022) Managing the inspection process of concrete bridge decks. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Abdelmageed, S; Abdelkhalek, S I F M; Hussien, M and Zayed, T (2024) A hybrid simulation model for modules installation in modular integrated construction projects. International Journal of Construction Management, 24(13), pp. 1407-1418. ISSN 1562-3599

Abdelrazik, H and Marzouk, M (2021) Investigating parameters affecting maintenance of heritage buildings in Egypt. International Journal of Building Pathology and Adaptation, 39(5), pp. 734-755. ISSN 23984708

Abdelshafy, A and Walther, G (2023) Using dynamic-locational material flow analysis to model the development of urban stock. Building Research & Information, 51(1), pp. 5-20. ISSN 0961-3218

Abdirad, H and Dossick, C S (2019) Restructuration of architectural practice in integrated project delivery (IPD): Two case studies. Engineering, Construction and Architectural Management, 26(1), pp. 104-117. ISSN 0969-9988

Abdolahi, M J; Barmayehvar, B; Marjani, T and Esmaeilabadi, R (2023) Investigating the relationship between human resource development and quality in building projects. Journal of Financial Management of Property and Construction, 28(2), pp. 260-271. ISSN 1366-4387

Abdollahzadeh, N; Farahani, A V; Soleimani, K and Zomorodian, Z S (2023) Indoor environmental quality improvement of student dormitories in Tehran, Iran. International Journal of Building Pathology and Adaptation, 41(1), pp. 258-278. ISSN 23984708

Abdolmaleki, G; Naismith, N; Ghodrati, N; Poshdar, M and Babaeian Jelodar, M (2024) An analysis of the literature on construction employee turnover: drivers, consequences, and future direction. Construction Management and Economics, 42(9), pp. 822-846. ISSN 01446193

Abdul Ghani, N and Tutesigensi, A (2023) Managing change in megaprojects. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Abdul Majid, M Z (1997) Non-excusable delays in construction. PhD thesis, Loughborough University, UK.

Abdul Nabi, M (2023) Promoting enhanced decision-making and proactive management for modularization in the construction industry using risk-based approach, analytical hierarchy process, and graph theory. PhD thesis, Missouri University of Science and Technology, USA.

Abdul Nabi, M and El-Adaway, I H (2021) Risk-based approach to predict the cost performance of modularization in construction projects. Journal of Construction Engineering and Management, 147(10): 04021133, ISSN 0733-9364

Abdul Nasir, N A B; Hassan, A S; Khozaei, F and Abdul Nasir, M H B (2021) Investigation of spatial configuration management on social distancing of recreational clubhouse for COVID-19 in Penang, Malaysia. International Journal of Building Pathology and Adaptation, 39(5), pp. 782-810. ISSN 23984708

Abdul Nifa, F A (2013) Development of a framework for partnering through aligning organizational cultures in the Malaysian construction industry. PhD thesis, University of Salford, UK.

Abdul-Aziz, A R and Awil, A U (2010) Locational considerations and international Malaysian housing developers. Journal of Financial Management of Property and Construction, 15(1), pp. 7-20. ISSN 1366-4387

Abdul-Aziz, A R; Jaafar, M and Hussin, A A (2007) Are government-linked construction companies in Malaysia still valid? The indigenous contractors' perspective. Construction Management and Economics, 25(10), pp. 1009-1019. ISSN 1466433X

Abdul-Aziz, A R; Ngau, D P; Lim, Y M and Nuruddin, A R (2011) Internationalization of Malaysian quantity surveying firms: Exploring the best fit models. Construction Management and Economics, 29(1), pp. 49-58. ISSN 1466433X

Abdul-Aziz, A R; Shiew yi, H and Jaafar, M (2007) Impact of firm characteristics on the value of resources for Malaysian private housing developers. Journal of Financial Management of Property and Construction, 12(2), pp. 95-106. ISSN 1366-4387

Abdul-Aziz, A R; Suresh, S and Renukappa, S (2020) The conundrum of professionalising building surveying in Malaysia. International Journal of Building Pathology and Adaptation, 38(5), pp. 621-634. ISSN 23984708

Abdul-Aziz, A R and Wong, S S (2010) Competitive assets of Malaysian international contractors. Journal of Financial Management of Property and Construction, 15(2), pp. 176-189. ISSN 1366-4387

Abdul-Aziz, A R and Wong, S S (2011) Business networks and internationalisation of contractors from developing countries: An explorative study. Engineering, Construction and Architectural Management, 18(3), pp. 282-296. ISSN 0969-9988

Abdul-Aziz, A R and Wong, S S (2011) Foreign market-entry considerations for Malaysian contractors. International Journal of Construction Management, 11(4), pp. 1-12. ISSN 1562-3599

Abdul-Lateef, O A (2010) Quantitative analysis of criteria in university building maintenance in Malaysia. Construction Economics and Building, 10(3), pp. 51-61. ISSN 2204-9029

Abdul-Rahman, H (1996) Some observations on the management of quality among construction professionals in the UK. Construction Management and Economics, 14(6), pp. 485-495. ISSN 01446193

Abdul-Rahman, H; Berawi, M A; Berawi, A R; Mohamed, O; Othman, M and Yahya, I A (2006) Delay mitigation in the Malaysian construction industry. Journal of Construction Engineering and Management, 132(2), pp. 125-133. ISSN 0733-9364

AbdulAzeez, A D; Etubi, U and Umar, B (2019) An assessment of multi-skilling in addressing skills shortage in Nigerian construction firms. African Journal of Built Environment Research, 3(1), pp. 1-13. ISSN 2414-0236

Abdulai, S F; Zayed, T; Taiwo, R and Ali, A H (2025) Hybrid statistical analysis of critical alignment factors in modular integrated construction. Journal of Construction Engineering and Management, 151(9): 04025129, ISSN 0733-9364

Abdulhadi, M A M E (2012) IT adoption in the construction sector in Libya. PhD thesis, University of Glamorgan, UK.

Abdulhadi, N H (1997) Simulation as a tool for re-engineering construction processes. PhD thesis, University of Colorado at Boulder, USA.

Abdulla, H S (2016) An investigation on the causes and remedial measures on the delays in the construction industry in the Kingdom of Bahrain. PhD thesis, Glasgow Caledonian University, UK.

Abdullah, A (2003) Intelligent selection of demolition techniques. PhD thesis, Loughborough University, UK.

Abdullah, A H; Yaman, S K; Mohammad, H and Hassan, P F (2018) Construction manager's technical competencies in Malaysian construction projects. Engineering, Construction and Architectural Management, 25(2), pp. 153-177. ISSN 0969-9988

Abdullah, A K and Alshibani, A (2022) Multi-criteria decision-making framework for selecting sustainable private partners for housing projects. Journal of Financial Management of Property and Construction, 27(1), pp. 112-140. ISSN 1366-4387

Abdullah, A M and Vickridge, I G (2000) The extent of multi-project management implementation in the UK construction industry. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Abdullah, A-N M (2019) Assessing economic, social, political and environmental issues related to mega-projects : A case study of Merowe Dam in Sudan. PhD thesis, University of Plymouth, UK.

Abdullah, S; Abdul Wahab, M R; Abdul Razak, A and Hanafi, M H (2023) Property taxation: The encouraging factors for payment among the taxpayers. Journal of Financial Management of Property and Construction, 28(1), pp. 22-44. ISSN 1366-4387

Abdullah, W M W (2010) Critical factors in project success: A study of public sector construction projects in Malaysia. PhD thesis, University of Malaya, Malaysia.

Abdullah Habib, S N H (2017) Critical success factors and contractual risks for Private Finance 2 projects implementing building information modelling. PhD thesis, University of Salford, UK.

Abdullah Sani, H. A. and Jaafar, N. I. (2026) Exploring the impact of IoT on governance and public service transformation: Evidence from malaysia's public sector. Smart and Sustainable Built Environment, 15(5), pp. 1991-2014. ISSN 2046-6099

Abdullahi, A L (2016) Ethnomimicry: the development of a conceptual model of the Nigerian practice of the end-of-life management of buildings. PhD thesis, University of Huddersfield, UK.

Abdullahi, D; Renukappa, S; Suresh, S and Oloke, D (2022) Barriers for implementing solar energy initiatives in Nigeria: An empirical study. Smart and Sustainable Built Environment, 11(3), pp. 647-660. ISSN 2046-6099

Abdullahi, U; Bustani, S A; Hassan, A and Rotimi, F E (2019) Assessing quality management practice in Nigerian construction industry. Journal of Construction Business and Management, 3(2), pp. 17-25. ISSN 2521-0165

Abdulrahman, A (2010) The development of a performance measurement framework for FE/HE co-location construction projects. PhD thesis, Heriot-Watt University, UK.

Abdulsalam, R S; Chan, M; Masrom, M A N and Nawawi, A H (2024) Benefits and challenges of implementing green building development in Nigeria. Built Environment Project and Asset Management, 14(3), pp. 399-413. ISSN 2044-124X

Abdurezake, S K; Mengistu, D G; Abdela, S A and Tesfaye, B Z (2026) Construction professionals' retention practice in construction companies. International Journal of Construction Management, 26(3), pp. 365-380. ISSN 1562-3599

Abedmousa, M (2023) Reframing construction labour productivity in a colonisation context: the West Bank as an example. PhD thesis, University of Westminster, UK.

Abeysekera, W V K M (1997) A strategy for managing brickwork in Sri Lanka. PhD thesis, Loughborough University, UK.

Abhulimen, P E (2024) The influence of information-sharing and trust on competitiveness and organizational performance in construction supply chain management. DBA thesis, Keiser University, USA.

Abideen, Dania Khairy (2024) A framework for integrating building information modelling with operations and maintenance for buildings. PhD thesis, University of Manchester, UK.

Abidin, N Z; Yusof, N and Othman, A A E (2013) Enablers and challenges of a sustainable housing industry in Malaysia. Construction Innovation, 13(1), pp. 10-25. ISSN 1471-4175

Abiodun, I (2012) The role of public private partnership in highway infrastructure development and sustainability in Nigeria. PhD thesis, University of Salford, UK.

Abisuga, O A; Ogungbemi, A O; Akinpelu, A A and Oshodi, O S (2017) Assessment of building maintenance projects success factors in Lagos, Nigeria. Journal of Construction Business and Management, 1(1), pp. 29-38. ISSN 2521-0165

Abisuga, Olatunji (2020) Integrated collaborative facilities management framework for post-occupancy evaluation of higher education facilities. PhD thesis, University of New South Wales, Australia.

Abkar, M M A; Yunus, R; Harouache, A; Gamil, Y and Al-Shameri, A S A S (2025) The adoption of automation technology for the mitigation of material waste on construction sites in the Malaysian construction industry. International Journal of Construction Management, 25(5), pp. 530-541. ISSN 1562-3599

AboMoslim, S and Russell, A (2014) Screening design and construction technologies of skyscrapers. Construction Innovation, 14(3), pp. 307-345. ISSN 1471-4175

Aboagye, J N; Kissi, E; Acheampong, A and Badu, E (2024) Assessment of competencies to promote best project management practices for road infrastructure projects in Ghana. Journal of Engineering, Design and Technology, 22(2), pp. 438-455. ISSN 1726-0531

Aboagye-Nimo, E; Raidén, A B and Tietze, S (2011) Investigating good health and safety practices in small construction firms in the United Kingdom. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Abolghasemi, M.; Al-Mhdawi, M. K. S.; Rahimian, F. and Qazi, A. (2026) Exploring the nexus of stakeholder management, project performance and stakeholder satisfaction in Malaysian residential building projects: A PLS-SEM approach. Engineering, Construction and Architectural Management, 33(3), pp. 2089-2117. ISSN 0969-9988

Aboneh, A and Mahesh, G (2025) Understanding the key factors of operating environment for small and medium contractors in the developing economies: The case of Ethiopia. Journal of Engineering, Design and Technology, 23(1), pp. 69-87. ISSN 1726-0531

Abotaleb, I S (2018) Construction dispute mitigation: quantitative and qualitative analytic approach with a focus on bidding, out-of-sequence work, and contract analysis. PhD thesis, University of Tennessee, USA.

Abotaleb, I S and El-Adaway, I H (2017) Construction bidding markup estimation using a multistage decision theory approach. Journal of Construction Engineering and Management, 143(1): 04016079, ISSN 0733-9364

AbouMoemen, A A (2022) A BIM maturity-KPI assessment framework for a UK public sector local authority client. PhD thesis, University of Salford, UK.

Abouelkhier, N; Shawky, D and Marzouk, M (2022) Evaluating distance perception for architecture design alternatives in immersive virtual environment: A comparative study. Construction Innovation, 22(2), pp. 205-221. ISSN 1471-4175

Abourizk, S; Halpin, D; Mohamed, Y and Hermann, U (2011) Research in modeling and simulation for improving construction engineering operations. Journal of Construction Engineering and Management, 137(10), pp. 843-852. ISSN 1943-7862

Abowitz, D A and Toole, T M (2010) Mixed method research: Fundamental issues of design, validity, and reliability in construction research. Journal of Construction Engineering and Management, 136(1), pp. 108-116. ISSN 0733-9364

Abreu, M M and Lordsleem, A C (2019) Aluminum formwork system: Loss and productivity. Built Environment Project and Asset Management, 9(5), pp. 616-627. ISSN 2044-124X

Abruzzini, A and Abrishami, S (2022) Integration of BIM and advanced digital technologies to the end of life decision-making process: A paradigm of future opportunities. Journal of Engineering, Design and Technology, 20(2), pp. 388-413. ISSN 1726-0531

Abu Arqoub, M; Ghanbaripour, A N; Langston, C and Skulmoski, G (2023) Beyond design and delivery: Developing a model to measure end-user satisfaction (delight) in projects. Built Environment Project and Asset Management, 13(4), pp. 509-534. ISSN 2044-124X

Abu Bakar, R (1998) The management practices and organisational culture of large Malaysian construction contractors. PhD thesis, University of Reading, UK.

Abu Dabous, S; Zadeh, T and Ibrahim, F (2024) A failure mode, effects and criticality analysis-based method for formwork assessment and selection in building construction. International Journal of Building Pathology and Adaptation, 42(5), pp. 1019-1040. ISSN 2398-4708

Abu-Shabeen, N N (2008) Development of multi-criteria decision analysis models for bidding and contractor selection. PhD thesis, Edinburgh Napier University, UK.

Abubakar, M; Zailani, B M; Abdullahi, M and Dodo, M (2021) Skills and competencies for survival in the modern construction industry: Students' perspective in Nigeria. African Journal of Built Environment Research, 5(1), pp. 61-76. ISSN 2414-0236

Abubaker, A E (2010) Improvement of project planning in Libya. PhD thesis, University of Newcastle upon Tyne, UK.

Abudu, H. D.; Mewomo, M. C.; Adjei, K. O. and Bondinuba, F. K. (2026) An emergency response framework for improving crisis management in facilities: PLS-SEM approach. International Journal of Disaster Resilience in the Built Environment, ISSN 1759-5908

Abuelma'atti, A (2012) A strategic approach to the implementation of information technologies in small and medium-sized architecture, engineering and construction enterprises. PhD thesis, University of Salford, UK.

Abuelmaatti, A and Ahmed, V (2010) The potential of collaborative environments implementation in small and medium enterprises for the construction industry. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Abuezhayeh, S W; Ruddock, L and Shehabat, I (2022) Integration between knowledge management and business process management and its impact on the decision making process in the construction sector: A case study of Jordan. Construction Innovation, 22(4), pp. 987-1010. ISSN 1471-4175

Abuhussain, M (2020) An assessment of the Saudi Residential Buildings Envelope Code under the current and future climate change scenarios: the case for Jeddah in the hot and humid climate region. PhD thesis, University of Liverpool, UK.

Abujnah, M S (2010) Towards a risk management framework for Libyan house-building projects. PhD thesis, University of Salford, UK.

AbulHassan, H S (2001) A framework for applying concurrent engineering principles to the construction industry. PhD thesis, Pennsylvania State University, USA.

Abulfatih, B M (2000) Project manager's effectiveness in productivity of Bahrain's construction industry. PhD thesis, University of Reading, UK.

Abunyewah, M; Gajendran, T; Maund, K and Okyere, S A (2020) Linking information provision to behavioural intentions: Moderating and mediating effects of message clarity and source credibility. International Journal of Disaster Resilience in the Built Environment, 11(1), pp. 100-118. ISSN 1759-5916

Abusalem, O (2020) Towards last planner system implementation in Gaza Strip, Palestine. International Journal of Construction Management, 20(5), pp. 367-384. ISSN 1562-3599

Abuzeinab, A (2015) Implementing green business models in the UK construction industry: opportunities and challenges. PhD thesis, University of Salford, UK.

Abuzeinab, A; Arif, M; Kulonda, D J and Awuzie, B O (2016) Green business models transformation: Evidence from the UK construction sector. Built Environment Project and Asset Management, 6(5), pp. 478-490. ISSN 2044-124X

Abuzeinab, A; Arif, M; Qadri, M A and Kulonda, D (2018) Green business models in the construction sector: An analysis of outcomes and benefits. Construction Innovation, 18(1), pp. 20-42. ISSN 1471-4175

Acar, E; Koçak, I; Sey, Y and Arditi, D (2005) Use of information and communication technologies by small and medium-sized enterprises (SMEs) in building construction. Construction Management and Economics, 23(7), pp. 713-722. ISSN 01446193

Acharya, N K; Dai Lee, Y and Man im, H (2006) Conflicting factors in construction projects: Korean perspective. Engineering, Construction and Architectural Management, 13(6), pp. 543-566. ISSN 0969-9988

Acheampong, A; Adjei, E K; Adade-Boateng, A O; Kissi, E; Manu, P and Atibila, D W (2025) Exploring the multidimensional challenges in integrating design for safety (dfs) in the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(5), pp. 1483-1500. ISSN 1726-0531

Acheampong, A; Adjei, E K; Asiedu, R O; Atibila, D W and Abu, I M A (2025) Evaluating the factors influencing artificial intelligence technology uptake in health and safety management within the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(6), pp. 2060-2081. ISSN 1726-0531

Acheng, P O; Kibwami, N; Mukasa, T J; Odongkara, B B; Birungi, R; Semanda, J and Manga, M (2023) Building information modelling adoption in uganda's construction industry. International Journal of Construction Management, 23(13), pp. 2185-2208. ISSN 1562-3599

Achour, N; Pantzartzis, E; Pascale, F and Price, A D F (2015) Integration of resilience and sustainability: From theory to application. International Journal of Disaster Resilience in the Built Environment, 6(3), pp. 347-362. ISSN 1759-5916

Achour, N and Price, A D F (2010) Resilience strategies of healthcare facilities: Present and future. International Journal of Disaster Resilience in the Built Environment, 1(3), pp. 264-276. ISSN 1759-5916

Acre, F and Wyckmans, A (2015) The impact of dwelling renovation on spatial quality: The case of the Arlequin neighbourhood in Grenoble, France. Smart and Sustainable Built Environment, 4(3), pp. 268-309. ISSN 2046-6099

Adabre, M A and Chan, A P C (2020) Towards a sustainability assessment model for affordable housing projects: The perspective of professionals in Ghana. Engineering, Construction and Architectural Management, 27(9), pp. 2523-2551. ISSN 0969-9988

Adafin, J; Rotimi, J O B and Wilkinson, S (2015) Why do the design stage elemental cost plan and final tender sum differ in New Zealand? Journal of Financial Management of Property and Construction, 20(2), pp. 116-131. ISSN 1366-4387

Adafin, J; Rotimi, J O B and Wilkinson, S (2020) Risk impact assessments in project budget development: Quantity surveyors' perspectives. International Journal of Construction Management, 20(1), pp. 13-28. ISSN 1562-3599

Adafin, J; Wilkinson, S; Rotimi, J O B; MacGregor, C; Tookey, J and Potangaroa, R (2022) Creating a case for innovation acceleration in the New Zealand building industry. Construction Innovation, 22(1), pp. 185-204. ISSN 1471-4175

Adah, C and Odeyinka, H (2024) Capability maturity of quantity surveying firms adopting building information modelling in Nigeria. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Adaku, E; Ankrah, N A and Ndekugri, I E (2022) Prevention through design: Conceptual models for the assessment of a principal designer's skills, knowledge and experience. Journal of Engineering, Design and Technology, 20(3), pp. 595-623. ISSN 1726-0531

Adaku, E; Osei-Poku, V; Ottou, J A and Yirenkyi-Fianko, A (2024) Contractor payment delays: A systematic review of current trends and future directions. Construction Innovation, 24(5), pp. 1205-1227. ISSN 1471-4175

Adam, V; Manu, P; Mahamadu, A M; Dziekonski, K; Kissi, E; Emuze, F and Lee, S (2022) Building information modelling (BIM) readiness of construction professionals: The context of the Seychelles construction industry. Journal of Engineering, Design and Technology, 20(3), pp. 823-840. ISSN 1726-0531

Adams, F K (2004) The management of risks in international infrastructural projects. PhD thesis, University of Edinburgh, UK.

Adams, J (2019) Dynamic criticality analysis of industrial assets and system. PhD thesis, University of Cambridge, UK.

Adamtey, S and Onsarigo, L (2018) Analysis of pipe-bursting construction risks using probability-impact model. Journal of Engineering, Design and Technology, 16(3), pp. 461-477. ISSN 1726-0531

Adamu, I I; Okanlawon, T T; Oyewobi, L O; Shittu, A A and Jimoh, R A (2026) Revolutionising construction safety: Benefits of harnessing artificial intelligence tools for dynamic monitoring of safety compliance on construction projects in Nigeria. International Journal of Building Pathology and Adaptation, 44(1), pp. 241-265. ISSN 2398-4708

Adas, A A (1996) The level of organizational effectiveness of the (ICI) construction firm: A multivariate model-based prediction methodology. PhD thesis, University of Waterloo, USA.

Addy, M. N.; Addo, E. T.; Abdulai, S. F.; Kwofie, T. E.; Aigbavboa, C. O. and Adade-Boateng, A. O. (2026) E-procurement acceptance in the Ghanaian public sector: An application of an extended technology acceptance model (TAM) in the construction industry. Journal of Engineering, Design and Technology, 24(2), pp. 494-515. ISSN 1726-0531

Addy, M; Adinyira, E and Ayarkwa, J (2018) Antecedents of building information modelling adoption among quantity surveyors in Ghana: An application of a technology acceptance model. Journal of Engineering, Design and Technology, 16(2), pp. 313-326. ISSN 1726-0531

Addy, M; Adinyira, E; Danku, J C and Dadzoe, F (2021) Impediments to the development of the green building market in Sub-Saharan Africa: The case of Ghana. Smart and Sustainable Built Environment, 10(2), pp. 193-207. ISSN 2046-6099

Addy, M N; Addo, E T; Kwofie, T E and Yartey, J E (2023) Predicting the adoption of e-procurement in construction project delivery in Sub-Saharan Africa: An application of utaut2. Construction Innovation, 23(5), pp. 1038-1053. ISSN 1471-4175

Addy, M N; Adinyira, E; Dadzoe, F and Opoku, D (2022) The market for green buildings in Sub-Saharan Africa: Experts' perspective on the economic benefits in Ghana. Journal of Construction in Developing Countries, 27(1), pp. 173-188. ISSN 1823-6499

Addy, M N; Akunyumu, S and Simons, B (2019) Key risk factors affecting renewable energy independent power producer (IPP) set-up projects in developing countries: The case of Ghana. Journal of Engineering, Design and Technology, 17(6), pp. 1340-1355. ISSN 1726-0531

Addy, M N; Dadzoe, F; Kwofie, T E; Aigbavboa, C and Simons, B (2024) Innovative green construction adoption in Ghana: Architects' perspectives from theory of planned behaviour. Built Environment Project and Asset Management, 14(5), pp. 782-797. ISSN 2044-124X

Addy, M N; Kwofie, T E E; Agbonani, D M and Essegbey, A E (2024) Using the TOE theoretical framework to study the adoption of BIM-AR in a developing country: the case of Ghana. Journal of Engineering, Design and Technology, 22(6), pp. 1913-1935. ISSN 1726-0531

Ade-Ojo, O C (2022) Awareness of the LEED requirements for green housing development among built-environment professionals in Nigeria. Built Environment Project and Asset Management, 12(4), pp. 521-536. ISSN 2044-124X

Adebara, T M (2024) Exploring the temporary appropriation of marginal open spaces in urban residential neighbourhoods. Journal of Construction in Developing Countries, 29(1), pp. 47-65. ISSN 1823-6499

Adebowale, O J and Agumba, J N (2023) A meta-analysis of factors affecting construction labour productivity in the middle East. Journal of Construction in Developing Countries, 28(1), pp. 193-220. ISSN 1823-6499

Adebowale, O J and Agumba, J N (2024) Applications of augmented reality for construction productivity improvement: A systematic review. Smart and Sustainable Built Environment, 13(3), pp. 479-495. ISSN 2046-6099

Adebowale, O J and Agumba, J N (2025) Construction SMEs labour productivity: Causal layered analysis. Journal of Engineering, Design and Technology, 23(2), pp. 501-524. ISSN 1726-0531

Adedeji, J A; Fadamiro, J A and Odeyale, T O (2020) Design toolkits for campus open spaces from post-occupancy evaluations of federal universities in South-West Nigeria. Built Environment Project and Asset Management, 10(2), pp. 296-311. ISSN 2044-124X

Adedeji, T; Proverbs, D G; Xiao, H and Oladokun, V O (2024) Measuring property flood resilience (PFR) in UK homes. International Journal of Building Pathology and Adaptation, 42(6), pp. 1328-1349. ISSN 2398-4708

Adediran, A (2018) Modelling targeted procurement strategies and relationship quality criteria influencing the development of small contractors in South Africa. PhD thesis, University of Cape Town, South Africa.

Adedokun, O; Aje, I; Awodele, O and Egbelakin, T (2022) Are the public tertiary education building projects devoid of risks in the Nigerian construction context? Journal of Financial Management of Property and Construction, 27(2), pp. 259-278. ISSN 1366-4387

Adedokun, O and Egbelakin, T (2025) Understanding householders' perceptions of threats following the 2019/2020 black summer bushfires in Australia. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 209-223. ISSN 1759-5908

Adedokun, O A; Egbelakin, T; Adedokun, D O and Adafin, J (2023) Success criteria-based impacts of risk factors on education building projects in Southwestern Nigeria. Journal of Engineering, Design and Technology, 21(6), pp. 1901-1924. ISSN 1726-0531

Adegoke, A.; Akanmu, A. and Terreno, S. (2026) Aligning visual data practices with construction decision making: Delphi-based investigation. Journal of Construction Engineering and Management, 152(8): 04026119, ISSN 0733-9364

Adegoriola, M I; Lai, J H K; Yung, E H K and Chan, E H W (2024) Development of a significant index model for assessing heritage building maintenance management challenges. Engineering, Construction and Architectural Management, 31(8), pp. 3398-3428. ISSN 0969-9988

Adegun, O B (2023) Climatic disasters within a flood-prone coastal slum in Lagos: Coping capacities and adaptation prospects. International Journal of Disaster Resilience in the Built Environment, 14(2), pp. 212-228. ISSN 1759-5916

Adekunle, O O (2019) A linear programming-based optimization model to address skilled labor shortages through strategic investments in the construction industry. DEng thesis, Morgan State University, USA.

Adekunle, S A; Aigbavboa, C O; Ejohwomu, O; Adekunle, E A and Thwala, W D (2024) Digital transformation in the construction industry: A bibliometric review. Journal of Engineering, Design and Technology, 22(1), pp. 130-158. ISSN 1726-0531

Adekunle, T O (2019) Summer performance, comfort, and heat stress in structural timber buildings under moderate weather conditions. Smart and Sustainable Built Environment, 8(3), pp. 220-242. ISSN 2046-6099

Adelfio, M and Brandão, E (2025) Urban living labs: Relationality between institutions and local circularity. Buildings & Cities, 6(1), pp. 862-880. ISSN 2632-6655

Adeniyi, O (2017) Capability maturity model for assessing flood resilience capabilities of the built environment. PhD thesis, University of Northumbria, UK.

Adepu, N; Kermanshachi, S; Pamidimukkala, A and Nwakpuda, E (2025) An analytical approach to understanding construction cost overruns during COVID-19. Smart and Sustainable Built Environment, 14(6), pp. 1780-1794. ISSN 2046-6099

Adepu, N; Kermanshachi, S; Pamidimukkala, A and Nwakpuda, E (2026) Predicting construction schedule overruns during COVID-19 using ordinal logistic regression. International Journal of Building Pathology and Adaptation, 44(1), pp. 110-125. ISSN 2398-4708

Adepu, N (2023) Analysis of the impact of COVID-19 on construction cost and schedule overruns. PhD thesis, University of Texas at Arlington, USA.

Adesi, M.; Dramani, A.; Owusu-Manu, D. G.; Ahiabu, M. K. and Kissi, E. (2026) Canonical correlation analysis of employee well-being and performance among construction workers in Ghana. Journal of Engineering, Design and Technology, 24(4), pp. 1037-1056. ISSN 1726-0531

Adesi, M; Murphy, R and Kehily, D (2018) The role of digitisation in the strategic planning process of Irish quantity surveying practices. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Adesi, M; Murphy, R and Kehily, D (2019) The strategy process of Irish quantity surveying firms operating within a turbulent business environment. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Adesi, M; Owusu-Manu, D G and Boateng, F (2019) Segmentation of quantity surveying professional services for focus strategy and diversification. Journal of Financial Management of Property and Construction, 24(3), pp. 294-308. ISSN 1366-4387

Adesi, M; Owusu-Manu, D G and Murphy, R (2018) Strategic competences for pricing quantity surveying consultancy services. Engineering, Construction and Architectural Management, 25(3), pp. 458-474. ISSN 0969-9988

Adetooto, J; Windapo, A and Pomponi, F (2024) The use of alternative building technologies as a sustainable affordable housing solution: Perspectives from South Africa. Journal of Engineering, Design and Technology, 22(5), pp. 1447-1463. ISSN 1726-0531

Adetooto, J; Windapo, A; Pomponi, F; Companie, F; Alade, K and Mtya, A (2024) Strategies to promote the acceptance of sandbag building technology for sustainable and affordable housing delivery: The South African case. Journal of Engineering, Design and Technology, 22(5), pp. 1505-1522. ISSN 1726-0531

Adetunji, I O (2006) Sustainable construction: a web-based performance assessment tool. EngD thesis, Loughborough University, UK.

Adewunmi, O A; Ibem, E and Amole, D (2014) Satisfaction of first-time residential clients with architectural services. Journal of Engineering, Design and Technology, 12(3), pp. 316-335.

Adeyeye, K and Emmitt, S (2017) Multi-scale, integrated strategies for urban flood resilience. International Journal of Disaster Resilience in the Built Environment, 8(5), pp. 494-520. ISSN 1759-5916

Adham, T A (1992) Formation of project managers. PhD thesis, Loughborough University, UK.

Adia, I (2019) Strategies to secure sustainable funding for the successful conclusion of infrastructure projects. PhD thesis, Walden University, USA.

Adigbo, F A (2020) Stakeholder engagement and construction project performance in Ghana. PhD thesis, Northcentral University, USA.

Adinyira, E; Agyekum, K; Manu, P; Mahamadu, A M and Olomolaiye, P (2022) Lessening procurement deviations using procurement post reviews: Evidence from Ghana. Journal of Financial Management of Property and Construction, 27(2), pp. 199-219. ISSN 1366-4387

Adio, Obafemi Adekunle (2022) An automated knowledge-based decision support system for managing non-conformances on australia's large infrastructure projects. PhD thesis, University of Melbourne, Australia.

Adjei, E A (2015) Multi-objective optimisation of building design variables and its impact on office building performance: a case for Ghana. PhD thesis, University of Nottingham, UK.

Adjei, K O (2020) A model for predicting cost control practice in the Ghanaian construction industry. DPhil thesis, University of Johannesburg, South Africa.

Adjei, K O; Abudu, H D; Nana-Addy, E and Musonda, I (2025) The motivation for occupants’ adoption of hidden emergency exits in buildings. Engineering, Construction and Architectural Management, 32(13), pp. 133-147. ISSN 0969-9988

Adjei, S D (2016) Review of waste management in the UK construction industry. PhD thesis, University of Wolverhampton, UK.

Adjei, S D; Ankrah, N A; Ndekugri, I and Searle, D (2018) Sustainable construction and demolition waste management: Comparison of corporate and project level drivers. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Adnan, H (2004) Joint venture projects in Malaysian construction industry: Factors critical to success. PhD thesis, Nottingham Trent University, UK.

Adnan, H B (2004) Joint venture projects in Malaysian Construction Industry Factors Critical to success. PhD thesis, Nottingham Trent University, UK.

Adogbo, K J (2013) Development of a framework for attracting and retaining women in construction practice. Unpublished PhD thesis, Ahmadu Bello University, Zaria, Nigeria.

Adogbo, K J; Ibrahim, A D and Ibrahim, Y M (2015) Development of a framework for attracting and retaining women in construction practice. Journal of Construction in Developing Countries, 20(1), pp. 99-115. ISSN 1823-6499

Adu, E. T.; Olowookere, L. B. and Olorunlogbon, O. O. (2026) Gender inclusiveness in addressing manpower shortages in the Nigerian construction industry: Barriers and benefits. International Journal of Construction Education and Research, 22(2), pp. 191-210. ISSN 1557-8771

Adu, E T; Lamptey-Puddicombe, A D and Opawole, A (2020) Consultants' perspectives of survival strategies for small and medium construction firms at infancy stage. Journal of Construction Business and Management, 4(1), pp. 34-47. ISSN 2521-0165

Adu Gyamfi, T; Aigbavboa, C O and Thwala, W D (2024) Risk resources management influence on public-private partnership risk management in construction industry: Confirmatory factor analysis approach. Journal of Engineering, Design and Technology, 22(5), pp. 1544-1569. ISSN 1726-0531

Adu-Amankwa, N. A. N. and Rahimian, F. (2026) Harnessing blockchain-enabled digital twins for building commissioning: Examining practitioners' perspectives. Engineering, Construction and Architectural Management, 33(3), pp. 1891-1906. ISSN 0969-9988

Adukpo, Emmanuel Selorm (2018) The development of governance capabilities for project owners and operators : a dynamic capabilities perspective. PhD thesis, University of Hong Kong, Hong Kong.

Adzivor, E K; Emuze, F and Das, D K (2023) Indicators for safety culture in SME construction firms: A Delphi study in Ghana. Journal of Financial Management of Property and Construction, 28(3), pp. 293-316. ISSN 1366-4387

Adzroe, E K (2015) A study of e-business technology transfer via foreign direct investment in the Ghanaian construction industry. PhD thesis, University of Salford, UK.

Afful, A E; Ayarkwa, J; Acquah, G K K; Baah, B; Adjei, E K; Oduro, S and Asiedu-Ampem, G (2026) Towards the delivery of environmentally sustainable buildings in Ghana: Drivers of capacity building. International Journal of Construction Education and Research, 22(1), pp. 27-52. ISSN 1557-8771

Afful, A E; Ayarkwa, J; Acquah, G K K; Ossei Assibey, A A D and Osei-Asibey, D (2024) Identifying the capacity needs of built environment professionals to deliver environmentally sustainable buildings: A scientometric review. Journal of Engineering, Design and Technology, 22(5), pp. 1464-1490. ISSN 1726-0531

Afifi, M; Fotouh, A; Al-Hussein, M and Abourizk, S (2022) Integrated lean concepts and continuous/discrete-event simulation to examine productivity improvement in door assembly-line for residential buildings. International Journal of Construction Management, 22(13), pp. 2423-2434. ISSN 1562-3599

Afshar, M R and Asadzadeh Zenozi, H (2022) Introducing a fuzzy MCDM model for financial management in multiple project environments. Construction Innovation, 22(2), pp. 305-319. ISSN 1471-4175

Aftab, U; Hassan, M U; Ullah, F; Nasir, A R and Thaheem, M J (2026) BIM-based search and selection of construction material suppliers: A dedicated framework and prototype. Construction Innovation, 26(3), pp. 892-915. ISSN 1471-4175

Afzal, Fatima (2019) A framework to improve sustainability performance of construction organisations. PhD thesis, University of New South Wales, Australia.

Agapiou, A (1996) Forecasting the supply of construction labour. PhD thesis, Loughborough University, UK.

Agapiou, A and Clark, B (2011) Scottish construction lawyers and mediation: An investigation into attitudes and experiences. International Journal of Law in the Built Environment, 3(2), pp. 159-181. ISSN 1756-1450

Agapiou, A and Clark, B (2014) Construction mediation in Scotland: A comparison of the views and experiences of lawyers and end-users. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Agapiou, A; Clausen, L E; Flanagan, R; Norman, G and Notman, D (1998) The role of logistics in the materials flow control process. Construction Management and Economics, 16(2), pp. 131-137. ISSN 01446193

Agarwal, S; Kant, R and Shankar, R (2022) Humanitarian supply chain management: Modeling the pre and post-disaster relief operations. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 421-439. ISSN 1759-5916

Agarwal, U A; Baral, R and Rastogi, M (2025) Work–family conflict and work engagement among construction professionals: Role of psychological contract breach and gender. Engineering, Construction and Architectural Management, 32(4), pp. 2507-2532. ISSN 0969-9988

Agbaxode, P D K (2022) A framework to improve design documentation quality using integrated project delivery (IPD) approach. PhD thesis, University of the Witwatersrand, Johannesburg, South Africa.

Agbaxode, P D K; Saghatforoush, E and Dlamini, S (2020) Integrated project delivery (IPD): Projecting a common good to key participants and the project. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Agbaxode, P D K; Saghatforoush, E and Dlamini, S (2025) Capabilities required of the conventional project delivery (CPD) approach in producing quality design documentation: The Ghanaian construction industry perspective. Journal of Engineering, Design and Technology, 23(2), pp. 682-701. ISSN 1726-0531

Agbaxode, P D K; Saghatforoush, E; Dlamini, S and Korsah, J K (2024) Integrated project delivery enablers to enhance conventional project delivery toward improving design documentation quality. Built Environment Project and Asset Management, 14(6), pp. 817-834. ISSN 2044-124X

Agbesi, K; Fugar, F D and Adjei-Kumi, T (2018) Modelling the adoption of sustainable procurement in construction organisations. Built Environment Project and Asset Management, 8(5), pp. 461-476. ISSN 2044-124X

Agbulos, A; Mohamed, Y; Al-Hussein, M; Abourizk, S and Roesch, J (2006) Application of lean concepts and simulation analysis to improve efficiency of drainage operations maintenance crews. Journal of Construction Engineering and Management, 132(3), pp. 291-299. ISSN 0733-9364

Aggor, K K (2017) Relationship between budget and project success factors in the Ghanaian building construction sector. PhD thesis, Walden University, USA.

Agha, R H M and Hussein, A N (2024) Adaptation re-use of traditional cafés in Erbil, Iraq. International Journal of Building Pathology and Adaptation, 42(1), pp. 153-174. ISSN 23984708

Agha, R H M and Kamara, J M (2017) Adaptations in traditional courtyard houses in Baghdad, Iraq. International Journal of Building Pathology and Adaptation, 35(4), pp. 348-363.

Aghimien, D; Aghimien, E I; Aigbavboa, C O; Aliu, J O; Oke, A E and Chan, D W M (2026) Strategies for enhancing construction digitalisation: A machine learning-based sensitivity analysis. Engineering, Construction and Architectural Management, 33(15), pp. 115-136. ISSN 0969-9988

Aghimien, D; Aigbavboa, C and Matabane, K (2023) Dynamic capabilities for construction organizations in the fourth industrial revolution era. International Journal of Construction Management, 23(5), pp. 855-864. ISSN 1562-3599

Aghimien, D; Aigbavboa, C; Oke, A and Aghimien, L (2022) Latent institutional environment factors influencing construction digitalization in South Africa. International Journal of Construction Education and Research, 18(2), pp. 142-158. ISSN 1557-8771

Aghimien, D; Aigbavboa, C; Oke, A; Thwala, W and Moripe, P (2022) Digitalization of construction organisations: A case for digital partnering. International Journal of Construction Management, 22(10), pp. 1950-1959. ISSN 1562-3599

Aghimien, D; Aliu, J; Akinradewo, O; Aghimien, L; Aigbavboa, C and Ditsele-Rapodile, K (2025) PLS-SEM assessment of the impact of job satisfaction on the organisational commitment of women quantity surveyors. International Journal of Construction Management, 25(1), pp. 115-123. ISSN 1562-3599

Aghimien, D O; Aghimien, E I; Fadiyimu, A O and Adegbembo, T F (2018) Survival strategies of built environment organisations in a challenging economy. Engineering, Construction and Architectural Management, 25(7), pp. 861-876. ISSN 0969-9988

Aghimien, D O; Aigbavboa, C; Edwards, D J; Mahamadu, A M; Olomolaiye, P; Nash, H and Onyia, M (2022) A fuzzy synthetic evaluation of the challenges of smart city development in developing countries. Smart and Sustainable Built Environment, 11(3), pp. 405-421. ISSN 2046-6099

Aghimien, D O; Aigbavboa, C O and Thwala, W D (2019) Microscoping the challenges of sustainable construction in developing countries. Journal of Engineering, Design and Technology, 17(6), pp. 1110-1128. ISSN 1726-0531

Aghimien, D O; Awodele, O A and Maipompo, C S (2019) Organisational commitment of construction skilled workers in selected construction firms in Nigeria. Journal of Construction Business and Management, 3(1), pp. 8-17. ISSN 2521-0165

Aghimien, D O; Oke, A E and Aigbavboa, C O (2018) Barriers to the adoption of value management in developing countries. Engineering, Construction and Architectural Management, 25(7), pp. 818-834. ISSN 0969-9988

Aghimien, L M; Aigbavboa, C O; Anumba, C J and Thwala, W D (2023) A confirmatory factor analysis of the challenges of effective management of construction workforce in South Africa. Journal of Engineering, Design and Technology, 21(4), pp. 1134-1152. ISSN 1726-0531

Agnoletto, S (2013) Building an economic ethic niche: Italian immigrants in the Toronto construction industry (1950s-1970s): a case study. PhD thesis, Kingston University, UK.

Agu, C A (2020) Exploring the standards american executive leaders need to develop successful infrastructure projects in sub-saharan Africa. DM thesis, Colorado Technical University, USA.

Agumba, J N (2013) A construction health and safety performance improvement model for South African small and medium enterprises. PhD thesis, University of Johannesburg, South Africa.

Agumba, J N and Haupt, T C (2014) The implementation of health and safety practices: Do demographic attributes matter? Journal of Engineering, Design and Technology, 12(4), pp. 530-550.

Agunbiade, O (2019) Transcendental phenomenological study of what the pipeline engineering personnel perceive as intention-to-leave. DM thesis, University of Phoenix, USA.

Aguocha, T (2023) Best practices for cost monitoring and control in construction projects: An exploratory case study. DBA thesis, National University, USA.

Agustí-Juan, I (2018) Sustainability assessment and development of guidelines for digital fabrication in construction. DSc thesis, ETH Zürich, Switzerland.

Agyakwa-Baah, A and Chileshe, N (2010) Construction professionals perception of risk assesssment and management practices: Does length of service in construction industry matter. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Agyefi-Mensah, S; Kpamma, Z E and Hagan, D E (2020) Residential adaptations as users' tacit means of communicating spatial needs in housing design: A case study. Journal of Engineering, Design and Technology, 18(6), pp. 1593-1613. ISSN 1726-0531

Agyefi-Mensah, S; Kpamma, Z E and Hagan, D E (2022) Stair step geometry compliance with standard specifications for safety and usability: A study of selected university buildings in Ghana. International Journal of Building Pathology and Adaptation, 40(1), pp. 20-39. ISSN 23984708

Agyekum, A K; Fugar, F D K; Agyekum, K; Akomea-Frimpong, I and Pittri, H (2023) Barriers to stakeholder engagement in sustainable procurement of public works. Engineering, Construction and Architectural Management, 30(9), pp. 3840-3857. ISSN 0969-9988

Agyekum, B; Kissi, E; Yamoah Agyemang, D and Badu, E (2018) Examining barriers for the utilization of non-traditional cost estimating models in developing countries: Ghanaian quantity surveyors' perspectives. Journal of Engineering, Design and Technology, 16(6), pp. 814-827. ISSN 1726-0531

Agyekum, K; Adinyira, E; Baiden, B; Ampratwum, G and Duah, D (2019) Barriers to the adoption of green certification of buildings: A thematic analysis of verbatim comments from built environment professionals. Journal of Engineering, Design and Technology, 17(5), pp. 1035-1055. ISSN 1726-0531

Agyekum, K; Akli-Nartey, E E K; Kukah, A S and Agyekum, A K (2023) Importance-performance analysis (IPA) of the indoor environmental quality (IEQ) of an edge-certified building in Ghana. International Journal of Building Pathology and Adaptation, 41(1), pp. 73-95. ISSN 23984708

Agyekum, K and Amudjie, J (2024) Challenges to implementing circular economy: Empirical evidence among built environment firms in Ghana. International Journal of Construction Management, 24(3), pp. 281-297. ISSN 1562-3599

Agyekum, K; Amudjie, J; Pittri, H; Dompey, A M A and Botchway, E A (2024) Prioritizing the principles of circular economy among built environment professionals. Built Environment Project and Asset Management, 14(5), pp. 734-750. ISSN 2044-124X

Agyekum, K; Botchway, S Y; Adinyira, E and Opoku, A (2022) Environmental performance indicators for assessing sustainability of projects in the Ghanaian construction industry. Smart and Sustainable Built Environment, 11(4), pp. 918-950. ISSN 2046-6099

Agyekum, K; Goodier, C and Oppon, J A (2022) Key drivers for green building project financing in Ghana. Engineering, Construction and Architectural Management, 29(8), pp. 3023-3050. ISSN 0969-9988

Agyekum, K; Kissi, E; Danku, J C; Ampratwum, G and Amegatsey, G S (2020) Factors driving the career progression of construction project managers. Journal of Engineering, Design and Technology, 18(6), pp. 1773-1791. ISSN 1726-0531

Agyekum, K; Kukah, A S and Amudjie, J (2022) The impact of COVID-19 on the construction industry in Ghana: The case of some selected firms. Journal of Engineering, Design and Technology, 20(1), pp. 222-244. ISSN 1726-0531

Agyekum, K; Opoku, A; Oppon, A J and Opoku, D G J (2022) Obstacles to green building project financing: An empirical study in Ghana. International Journal of Construction Management, 22(15), pp. 2922-2930. ISSN 1562-3599

Agyekum-Mensah, G; Knight, A and Pasquire, C (2012) Adaption of structured analysis design techniques methodology for construction project planning. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Agyekum-Mensah, G; Reid, A and Temitope, T A (2020) Methodological pluralism: Investigation into construction engineering and management research methods. Journal of Construction Engineering and Management, 146(3): 04020006, ISSN 0733-9364

Agyemang, E A; Musonda, I and Zulu, S (2025) Stakeholder theory and shareholder theory application in the construction field: A systematic scoping review. Construction Economics and Building, 25(2), pp. 89-111. ISSN 2204-9029

Ahadzie, D K (2007) A model for predicting the performance of project managers in mass house building projects in Ghana. PhD thesis, University of Wolverhampton, UK.

Ahadzie, D K; Opoku, R; Opoku Ware, S N and Mensah, H (2021) Analysis of occupant behaviour in the use of air-conditioners in public buildings in developing countries: Evidence from Ghana. International Journal of Building Pathology and Adaptation, 39(2), pp. 259-282. ISSN 23984708

Ahadzie, D K; Proverbs, D G; Olomolaiye, P O and Ankrah, N A (2009) Competencies required by project managers for housing construction in Ghana: Implications for CPD agenda. Engineering, Construction and Architectural Management, 16(4), pp. 353-375. ISSN 0969-9988

Ahankoob, A.; Abbasnejad, B.; Nazareth, I.; Macasaet, P. and Wong, P. S. (2026) Optimising virtual site assessment process for mounted PV array design: An immersive BIM-based approach for existing buildings. Smart and Sustainable Built Environment, pp. 1-26. ISSN 2046-6099

Ahankoob, A.; Calixto, V.; Abbasnejad, B. and Wong, P. S. P. (2026) A generative BIM approach for DfMA integration into building facade design. International Journal of Construction Management, 26(9), pp. 1858-1878. ISSN 1562-3599

Ahankoob, A; Manley, K; Hon, C and Drogemuller, R (2018) The impact of building information modelling (BIM) maturity and experience on contractor absorptive capacity. Architectural Engineering and Design Management, 14(5), pp. 363-380. ISSN 1745-2007

Ahankoob, A; Manley, K; Hon, C and Drogemuller, R (2023) The influence of building information modelling on the absorptive capacity of project-based organisations. Architectural Engineering and Design Management, 19(1), pp. 1-21. ISSN 1745-2007

Ahaotu, S M (2018) Effective implementation of total quality management within the Nigerian construction industry. PhD thesis, University of Salford, UK.

Ahaotu, Sylvia M (2019) Effective implementation of total quality management within the Nigerian construction industry. PhD thesis, University of Salford, UK.

Ahern, E (2022) A framework for improving the process of building certification to enhance energy efficiency: the case of Ireland. DProf thesis, Anglia Ruskin University, UK.

Ahiabu, M K; Emuze, F and Das, D (2023) Perception of the benefits of sustainable construction in Ghana. Built Environment Project and Asset Management, 13(2), pp. 306-323. ISSN 2044-124X

Ahiaga-Dagbui, D D and Smith, S D (2014) Exploring escalation of commitment in construction project management: Case study of the scottish parliament project. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Ahiaga-Dagbui, D D; Tokede, O; Morrison, J and Chirnside, A (2020) Building high-performing and integrated project teams. Engineering, Construction and Architectural Management, 27(10), pp. 3341-3361. ISSN 0969-9988

Ahiakwo, O A (2015) Improving construction processes in Nigeria using the Last Planner® System. PhD thesis, University of Wolverhampton, UK.

Ahmad, H; An, M and Gaterell, M (2008) Km model to embed knowledge management activities into work activities in construction organisations. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Ahmad, H S; Ayoush, M D and Al-Alwan, M S (2020) Causes of delay to public infrastructure projects according to engineers representing different contract parties. Built Environment Project and Asset Management, 10(1), pp. 153-179. ISSN 2044-124X

Ahmad, H S M (2011) Development of knowledge management model for knowledge management implementation and application in construction projects. PhD thesis, University of Birmingham, UK.

Ahmad, Hesham Saleh Mahmoud (2011) Development of km model for knowledge management implementation and application in construction projects. PhD thesis, University of Birmingham, UK.

Ahmad, I (1990) Decision-support system for modeling bid/no-bid decision problem. Journal of Construction Engineering and Management, 116(4), pp. 595-608. ISSN 0733-9364

Ahmad, M A; Demian, P and Price, A D F (2012) Building information modelling implementation plans: A comparative analysis. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Ahmad, R K (2000) Developing a proactive safety performance measurement tool (SPMT) for construction sites. PhD thesis, Loughborough University, UK.

Ahmad, S; Soetanto, R and Goodier, C (2019) Lean approach in precast concrete component production. Built Environment Project and Asset Management, 9(3), pp. 457-470. ISSN 2044-124X

Ahmad, S B S; Mazhar, M U; Bruland, A; Andersen, B S; Langlo, J A and Torp, O (2020) Labour productivity statistics: A reality check for the Norwegian construction industry. International Journal of Construction Management, 20(1), pp. 39-52. ISSN 1562-3599

Ahmad, S B S; Mazhar, M U; Laedre, O; Bruland, A and Torp, O (2022) Improvement measures to achieve sustainable construction labour performance. International Journal of Construction Management, 22(1), pp. 85-102. ISSN 1562-3599

Ahmad, T and Aibinu, A A (2017) Project delivery attributes influencing green building project outcomes: A review and future research directions. Built Environment Project and Asset Management, 7(5), pp. 471-489. ISSN 2044-124X

Ahmad Basri, S A; Syed Zakaria, S A; A.Majid, T and Yusop, Z (2022) Exploring awareness and application of disaster risk management cycle (drmc) from stakeholder's perspective. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 470-483. ISSN 1759-5916

Ahmad-Latiffi, A (2012) Performance measurement for construction businesses. PhD thesis, Loughborough University, UK.

Ahmadu, H A; Ibrahim, A D; Ibrahim, Y M and Adogbo, K J (2020) Incorporating aleatory and epistemic uncertainties in the modelling of construction duration. Engineering, Construction and Architectural Management, 27(9), pp. 2199-2219. ISSN 0969-9988

Ahmadu, H A; Ibrahim, Y M; Ibrahim, A D and Abdullahi, M (2015) Modelling building construction durations. Journal of Financial Management of Property and Construction, 20(1), pp. 65-84. ISSN 1366-4387

Ahmed, T; Delsante, I and Migliavacca, L (2025) Expanding the framework of urban living labs using grassroots methods. Buildings & Cities, 6(1), pp. 1081-1098. ISSN 2632-6655

Ahmed, A; Mohammed, H A; Gambatese, J and Hurwitz, D (2021) Effects of flashing blue lights mounted on paving equipment on vehicle speed behavior in work zones. Journal of Construction Engineering and Management, 147(9): 04021101, ISSN 0733-9364

Ahmed, I (2016) Housing and resilience: Case studies from the Cook Islands. International Journal of Disaster Resilience in the Built Environment, 7(5), pp. 489-500. ISSN 1759-5916

Ahmed, I and Charlesworth, E R (2015) An evaluation framework for assessing resilience of post-disaster housing. International Journal of Disaster Resilience in the Built Environment, 6(3), pp. 300-312. ISSN 1759-5916

Ahmed, I and McEvoy, D (2014) Post-tsunami resettlement in Sri Lanka and India: Site planning, infrastructure and services. International Journal of Disaster Resilience in the Built Environment, 5(1), pp. 53-65. ISSN 1759-5916

Ahmed, K; Leung, M Y; Yang, W and Manu, P (2025) Moderating effects of coping behaviors on stressor-stress relationships of ethnic minority construction workers. Journal of Construction Engineering and Management, 151(5): 04025031, ISSN 0733-9364

Ahmed, M E K and Girgs, I R N (2023) A comparative study on achieving universally designed schools. Two case studies at aswan city, Egypt. International Journal of Construction Management, 23(12), pp. 2102-2115. ISSN 1562-3599

Ahmed, M O; Abdul Nabi, M; El-Adaway, I H; Caranci, D; Eberle, J; Hawkins, Z and Sparrow, R (2021) Contractual guidelines for promoting integrated project delivery. Journal of Construction Engineering and Management, 147(11): 05021008, ISSN 0733-9364

Ahmed, Mohammed Ali (2020) An exploration of factors influencing quality management system implementation: The case of the Australian construction industry. PhD thesis, Queensland University of Technology, Australia.

Ahmed, S (2022) Risk management framework an analysis of risk management process in SMEs of the UK construction industry. PhD thesis, University of the West of Scotland, UK.

Ahmed, S and Arocho, I (2022) Implementing a choosing-by-advantages decision-making method to evaluate the critical success factors of mass-timber building materials in the US. Journal of Construction Engineering and Management, 148(10): 05022010, ISSN 0733-9364

Ahmed, S; Haq, I and Anam, S M A (2024) Impacts of COVID-19 on the construction sector in the least developed countries. International Journal of Building Pathology and Adaptation, 42(6), pp. 1085-1105. ISSN 2398-4708

Ahmed, S; Hossain, M M and Haq, I (2021) Implementation of lean construction in the construction industry in Bangladesh: Awareness, benefits and challenges. International Journal of Building Pathology and Adaptation, 39(2), pp. 368-406. ISSN 23984708

Ahmed, S; Islam, H; Hoque, I and Hossain, M (2020) Reality check against skilled worker parameters and parameters failure effect on the construction industry for Bangladesh. International Journal of Construction Management, 20(5), pp. 480-489. ISSN 1562-3599

Ahmed, S; Mahmud, A; Akoh, S and Tariq, U (2024) Exploring IPD as an antidote to fragmentation within the UK construction sector. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Ahmed, S; Romdhane, L; El-Sayegh, S M and Manjikian, S (2025) Risk assessment for 3D printing in construction projects. Journal of Financial Management of Property and Construction, 30(1), pp. 67-87. ISSN 1366-4387

Ahmed, S and Sobuz, M H R (2020) Challenges of implementing lean construction in the construction industry in Bangladesh. Smart and Sustainable Built Environment, 9(2), pp. 174-207. ISSN 2046-6099

Ahmed, S H A and Suliman, S M A (2020) A structure equation model of indicators driving BIM adoption in the Bahraini construction industry. Construction Innovation, 20(1), pp. 61-78. ISSN 1471-4175

Ahmed, S M; Ahmad, R and Darshi De Saram, D (1999) Risk management trends in the Hong Kong construction industry: A comparison of contractors and owners perceptions. Engineering, Construction and Architectural Management, 6(3), pp. 225-234. ISSN 0969-9988

Ahmed, S N; Pasquire, C and Manu, E (2022) Key factors affecting commercial actors in collaborative working within the UK construction industry. Journal of Financial Management of Property and Construction, 27(3), pp. 323-347. ISSN 1366-4387

Ahmed, S S (2018) Innovation of building processes in Syria by using BIM. PhD thesis, Czech Technical University, Czech Republic.

Ahmed, V; Pathmeswaran, R; Baldry, D; Worrall, L and Abouen, S (2008) An investigation into the barriers facing black and minority ethnics within the UK construction industry. Journal of Construction in Developing Countries, 13(2), pp. 83-99. ISSN 1823-6499

Ahmed, W; Najmi, A; Arif, M and Younus, M (2019) Exploring firm performance by institutional pressures driven green supply chain management practices. Smart and Sustainable Built Environment, 8(5), pp. 415-437. ISSN 2046-6099

Ahmed Ezzat Othman, A and Sirbadhoo, N (2009) An innovative partnership framework for sustainable development of rural areas in South Africa: The role of project management firms. Journal of Engineering, Design and Technology, 7(3), pp. 243-263. ISSN 1726-0531

Ahmed Memon, Z; Zaimi, M A M and Mustaffar, M (2007) A systematic procedure for developing the 3D model to evaluate the construction project progress. Construction Innovation, 7(2), pp. 187-199. ISSN 1471-4175

Ahn, S (2016) Using building information modeling (BIM) in construction worker safety training. PhD thesis, University of Florida, USA.

Ahn, S and Lee, S (2015) Methodology for creating empirically supported agent-based simulation with survey data for studying group behavior of construction workers. Journal of Construction Engineering and Management, 141(1): 04014065, ISSN 0733-9364

Ahn, S; Lee, S and Steel, R P (2014) Construction workers' perceptions and attitudes toward social norms as predictors of their absence behavior. Journal of Construction Engineering and Management, 140(5): 04013069, ISSN 0733-9364

Ahuja, R.; Sawhney, A.; Jain, M.; Arif, M. and Rakshit, S. (2020) Factors influencing BIM adoption in emerging markets: The case of India. International Journal of Construction Management, 20(1), pp. 65-76. ISSN 1562-3599

Ahuja, R; Sawhney, A and Arif, M (2018) Developing organizational capabilities to deliver lean and green project outcomes using BIM. Engineering, Construction and Architectural Management, 25(10), pp. 1255-1276. ISSN 0969-9988

Ahuja, R; Sawhney, A; Jain, M; Arif, M and Rakshit, S (2020) Factors influencing BIM adoption in emerging markets: the case of India. International Journal of Construction Management, 20(1), pp. 65-76. ISSN 1562-3599

Ahuja, V; Yang, J and Shankar, R (2010) Perceptions affecting ICT adoption for building project management in the Indian construction industry. International Journal of Construction Management, 10(2), pp. 1-18. ISSN 1562-3599

Ahuja, V; Yang, J and Shankar, R (2010) Benchmarking framework to measure extent of ICT adoption for building project management. Journal of Construction Engineering and Management, 136(5), pp. 538-545. ISSN 0733-9364

Ahuja, V; Yang, J; Skitmore, M and Shankar, R (2010) An empirical test of causal relationships of factors affecting ICT adoption for building project management: An Indian SME case study. Construction Innovation, 10(2), pp. 164-180. ISSN 1471-4175

Ahuja, Vanita (2007) It enhanced communication protocols for building project management by small and medium enterprises in the Indian construction industry. PhD thesis, Queensland University of Technology, Australia.

Aibinu, A A; Carter, S; Francis, V and Vaz-Serra, P (2020) Request for information frequency and their turnaround time in construction projects: A data-analytic study. Built Environment Project and Asset Management, 10(1), pp. 1-15. ISSN 2044-124X

Aibinu, A A and Odeyinka, H A (2006) Construction delays and their causative factors in Nigeria. Journal of Construction Engineering and Management, 132(7), pp. 667-677. ISSN 0733-9364

Aichouni, M; Messaoudene, N A; Al-Ghonamy, A and Touahmia, M (2014) An empirical study of quality management systems in the Saudi construction industry. International Journal of Construction Management, 14(3), pp. 181-190. ISSN 1562-3599

Aidane, A (2021) Applying an equity lens to project stakeholder engagement: How organizations are embedding equitable stakeholder engagement in their project management processes. PhD thesis, Canterbury Christ Church University, UK.

Aigbavboa, C and Thwala, W (2014) An assessment of critical success factors for the reduction of the cost of poor quality from construction projects in South Africa. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Aigbavboa, C O; Aghimien, D O; Thwala, W D and Ngozwana, M N (2022) Unprepared industry meet pandemic: COVID-19 and the South Africa construction industry. Journal of Engineering, Design and Technology, 20(1), pp. 183-200. ISSN 1726-0531

Aigbavboa, C O; Oke, A E; Aghimien, D O and Akinradewo, O I (2020) Improving resilience of cities through smart city drivers. Construction Economics and Building, 20(2), pp. 45-64. ISSN 2204-9029

Aigwi, I E; Egbelakin, T and Ingham, J (2018) Efficacy of adaptive reuse for the redevelopment of underutilised historical buildings: Towards the regeneration of New Zealand's provincial town centres. International Journal of Building Pathology and Adaptation, 36(4), pp. 385-407. ISSN 23984708

Aigwi, I E; Nwadike, A N; Le, A T H; Rotimi, F E; Sorrell, T; Jafarzadeh, R and Rotimi, J (2022) Prioritising optimal underutilised historical buildings for adaptive reuse: A performance-based MCDA framework validation in auckland, New Zealand. Smart and Sustainable Built Environment, 11(2), pp. 181-204. ISSN 2046-6099

Aihie, V U; Oyetunji, A K; Omotayo, T and Ekundayo, D (2025) Does the analytical hierarchy process help appraisers make better decisions? A quasi-experimental approach for property investment comparables. International Journal of Building Pathology and Adaptation, 43(1), pp. 117-133. ISSN 2398-4708

Ailabouni, N; Painting, N and Ashton, P (2009) Factors affecting employee productivity in the UAE construction industry. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Aitken, A and Paton, R A (2016) The 'transaction X-ray': Understanding construction Procurement. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 169(3), pp. 115-123. ISSN 17514304

Aiyetan, A O and Das, D K (2023) Use of drones for construction in developing countries: Barriers and strategic interventions. International Journal of Construction Management, 23(16), pp. 2888-2897. ISSN 1562-3599

Ajayi, S; Brinklow-Harris, J; Alaka, H A and Dauda, J A (2019) Managing the benefits and impediments to offsite construction in the UK construction industry. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Ajayi, S; Saad, A; Oyegoke, A and Alaka, H (2024) Enhancing productivity and sustainability through BIM-based plugins: A case study of AutoBIM carbon diagnostics system. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Ajayi, S O (2017) Design, procurement and construction strategies for minimizing waste in construction projects. PhD thesis, University of the West of England, Bristol, UK.

Ajayi, S O; Lister, N; Dauda, J A; Oyegoke, A and Alaka, H (2024) Influencing sub-contracted operatives' attitudes and behaviours towards improved health and safety culture in construction. Engineering, Construction and Architectural Management, 31(6), pp. 2286-2305. ISSN 0969-9988

Ajibike, W A; Adeleke, A Q; Mohamad, F; Bamgbade, J A and Moshood, T D (2023) The impacts of social responsibility on the environmental sustainability performance of the Malaysian construction industry. International Journal of Construction Management, 23(5), pp. 780-789. ISSN 1562-3599

Ajisomo, T. O.; Saka, A.; Dauda, J. and Osuolale, M. (2025) Investigating circular economy barriers for construction and demolition waste in the construction industry: A Delphi and interpretive structural modelling approach. Construction Innovation, 26(4), pp. 1278-1308. ISSN 1471-4175

Ajmal, M M; Khan, M; Gunasekaran, A and Helo, P T (2022) Managing project scope creep in construction industry. Engineering, Construction and Architectural Management, 29(7), pp. 2786-2809. ISSN 0969-9988

Aka, A; Bamgbade, A A; Saidu, I and Balogun, O M (2019) A conceptual framework for waste identification and reduction in Nigerian sandcrete blocks production process. Construction Innovation, 19(3), pp. 405-423. ISSN 1471-4175

Aka, A; Bello, A O; Bamgbade, A A and Bilau, A A (2024) Age-performance consideration in the recruitment of tradespeople in Nigerian construction industry. Engineering, Construction and Architectural Management, 31(1), pp. 386-404. ISSN 0969-9988

Aka, A; Iji, J; Isa, R B and Bamgbade, A A (2021) Assessing the relationships between underlying strategies for effective building information modeling (BIM) implementation in Nigeria construction industry. Architectural Engineering and Design Management, 17(5-6), pp. 434-446. ISSN 1745-2007

Aka, A; Isah, A D; Eze, C J and Timileyin, O (2020) Application of lean manufacturing tools and techniques for waste reduction in Nigerian bricks production process. Engineering, Construction and Architectural Management, 27(3), pp. 658-679. ISSN 0969-9988

Aka, A; Isah, A D; Salisu, O I and Bello, A O (2025) Students’ perception of strategies for effective lean knowledge in future Nigerian construction industry. Construction Innovation, 25(4), pp. 1171-1187. ISSN 1471-4175

Akade, S A (2017) Understanding the impact of culture on project execution in a developing country: an action research study of six international oil and gas companies in Nigeria. PhD thesis, University of Liverpool, UK.

Akadiri, O P (2011) Development of a multi-criteria approach for the selection of sustainable materials for building projects. PhD thesis, University of Wolverhampton, UK.

Akadiri, P O and Fadiya, O O (2013) Empirical analysis of the determinants of environmentally sustainable practices in the UK construction industry. Construction Innovation, 13(4), pp. 352-373. ISSN 1471-4175

Akama, Y; Cooper, V and Mees, B (2016) Beyond transmission: An analysis of communication frameworks in Australian bushfire preparedness. International Journal of Disaster Resilience in the Built Environment, 7(1), pp. 49-62. ISSN 1759-5916

Akampurira, E and Windapo, A (2019) Key quality attributes of design documentation: South African perspective. Journal of Engineering, Design and Technology, 17(2), pp. 362-382. ISSN 1726-0531

Akanmu, A; Olayiwola, J and Olatunji, O A (2020) Musculoskeletal disorders within the carpentry trade: Analysis of timber flooring subtasks. Engineering, Construction and Architectural Management, 27(9), pp. 2577-2590. ISSN 0969-9988

Akbar, M R (2012) Evaluating sustainability in high-rise developments. PhD thesis, Ulster University, UK.

Akbari, S; Pour Rahimian, F; Sheikhkhoshkar, M; Banihashemi, S and Khanzadi, M (2020) Dynamic sustainable success prediction model for infrastructure projects: a rough set based fuzzy inference system. Construction Innovation, 20(4), pp. 545-567. ISSN 1471-4175

Akcamete, A (2011) A formal approach for managing facility change information and capturing change history as part of building information models (BIMs). PhD thesis, Carnegie Mellon University, USA.

Akdede, N.; Ay, B. Ö and Dino, İ G. (2026) Rethinking the second life of post-disaster and post-conflict temporary housing. Buildings & Cities, 7(1), pp. 488-503. ISSN 2632-6655

Akhavian, R and Behzadan, A H (2013) Knowledge-based simulation modeling of construction fleet operations using multimodal-process data mining. Journal of Construction Engineering and Management, 139(11): 4013021, ISSN 0733-9364

Akhavian, Reza (2015) Data-driven simulation modeling of construction and infrastructure operations using process knowledge discovery. PhD thesis, University of Central Florida, USA.

Akin, S; Ergun, O; Surer, E and Gursel Dino, I (2021) An immersive performative architectural design tool with daylighting simulations: A building information modeling-based approach. Engineering, Construction and Architectural Management, 28(4), pp. 1319-1344. ISSN 0969-9988

Akinade, O O (2017) BIM-based software for construction waste analytics using artificial intelligence hybrid models. PhD thesis, University of the West of England, Bristol, UK.

Akinbogun, O T (2023) An integrated capacity development for artisans in the Nigerian construction industry. PhD thesis, University of Johannesburg, South Africa.

Akindeinde, A S; Akinola, J A; Ojo, L D and Kenechukwu, O A (2024) Impact of modular integrated construction indicators on sustainable performance metrics in Nigeria. Construction Economics and Building, 24(4-5), pp. 81-97. ISSN 2204-9029

Akindele, Olabode Akinkunmi (2026) Innovation strategies for small and medium-sized construction companies in Nigeria. DBA thesis, Walden University, USA.

Akindele, O; Ajayi, S; Oyegoke, A S; Alaka, H A and Omotayo, T (2025) Application of geographic information system (GIS) in construction: A systematic review. Smart and Sustainable Built Environment, 14(1), pp. 210-236. ISSN 2046-6099

Akindele, O E; Ajayi, S; Toriola-Coker, L; Oyegoke, A S; Alaka, H and Zulu, S L (2023) Sustainable construction practice in Nigeria: Barriers and strategies for improvement. Built Environment Project and Asset Management, 13(4), pp. 590-609. ISSN 2044-124X

Akinnola, P (2021) Improving project performance on construction projects through stakeholder management-an action research inquiry. PhD thesis, University of Liverpool, UK.

Akinradewo, O; Aigbavboa, C and Oke, A (2020) Accuracy of road construction preliminary estimate: Examining the influencing factors. Built Environment Project and Asset Management, 10(5), pp. 657-671. ISSN 2044-124X

Akinradewo, O; Aigbavboa, C; Oke, A; Edwards, D and Kasongo, N (2023) Key requirements for effective implementation of building information modelling for maintenance management. International Journal of Construction Management, 23(11), pp. 1902-1910. ISSN 1562-3599

Akinradewo, O I; Aigbavboa, C O; Edwards, D J and Oke, A E (2022) A principal component analysis of barriers to the implementation of blockchain technology in the South African built environment. Journal of Engineering, Design and Technology, 20(4), pp. 914-934. ISSN 1726-0531

Akintola, A; Venkatachalam, S and Root, D (2017) New BIM roles' legitimacy and changing power dynamics on BIM-enabled projects. Journal of Construction Engineering and Management, 143(9): 04017066, ISSN 0733-9364

Akintola, B F; Jagboro, G O; Ojo, G K and Odediran, S J (2020) Effectiveness of mechanisms for enforcement of ethical standards in the construction industry. Journal of Construction Business and Management, 4(1), pp. 1-12. ISSN 2521-0165

Akintoye, A; Beck, M; Hardcastle, C; Chinyio, E A and Asenova, D (2001) Risk identification practices under PFI environment. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Akintoye, A; Beck, M; Hardcastle, C; Chinyio, E A and Asenova, D (2003) Outsourcing the Risk Analysis Function in 'Private Finance Initiative' Projects. Journal of Construction Procurement, 9(1), ISSN 1358-9180

Akintoye, A and Chinyio, E (2005) Private finance initiative in the healthcare sector: Trends and risk assessment. Engineering, Construction and Architectural Management, 12(6), pp. 601-616. ISSN 0969-9988

Akintoye, A and Fitzgerald, E (1995) Design and build: A survey of architects' views. Engineering, Construction and Architectural Management, 2(1), pp. 27-44. ISSN 0969-9988

Akintoye, A; Hardcastle, C; Beck, M; Chinyio, E and Asenova, D (2003) Achieving best value in private finance initiative project procurement. Construction Management and Economics, 21(5), pp. 461-470. ISSN 01446193

Akintoye, A and Main, J (2007) Collaborative relationships in construction: The UK contractors' perception. Engineering, Construction and Architectural Management, 14(6), pp. 597-617. ISSN 0969-9988

Akintoye, A; Renukappa, S and Lal, H (2012) The abolition of the contracts in writing rule in the 2009 Construction Act: Potential implications for UK adjudication. International Journal of Law in the Built Environment, 4(2), pp. 140-156. ISSN 1756-1450

Akmam Syed Zakaria, S; Gajendran, T; Skitmore, M and Brewer, G (2018) Key factors influencing the decision to adopt industrialised building systems technology in the Malaysian construction industry: An inter-project perspective. Architectural Engineering and Design Management, 14(1-2), pp. 27-45. ISSN 1745-2007

Akomea-Frimpong, I; Dzagli, J R A D; Eluerkeh, K; Bonsu, F B; Opoku-Brafi, S; Gyimah, S; Asuming, N A S; Atibila, D W and Kukah, A S (2025) A systematic review of artificial intelligence in managing climate risks of PPP infrastructure projects. Engineering, Construction and Architectural Management, 32(4), pp. 2430-2454. ISSN 0969-9988

Akomea-Frimpong, I; Jin, X; Osei Kyei, R; Tetteh, P A; Tumpa, R J; Ofori, J N A and Pariafsai, F (2024) A review of circular economy models and success factors on public-private partnership infrastructure development. Built Environment Project and Asset Management, 14(1), pp. 109-126. ISSN 2044-124X

Akomea-Frimpong, I; Jin, X; Osei-Kyei, R and Kukah, A S (2023) Public-private partnerships for sustainable infrastructure development in Ghana: A systematic review and recommendations. Smart and Sustainable Built Environment, 12(2), pp. 237-257. ISSN 2046-6099

Akotia, J and Awuzie, B (2025) Evaluating social sustainability factor prioritisation in sustainable urban regeneration projects: The case of UK construction industry. Construction Economics and Building, 25(1), pp. 4-24. ISSN 2204-9029

Akotia, J; Manu, E; Opoku, A and Sackey, E (2020) The role of built environment practitioners in driving the socio-economic sustainability aspects of sustainable regeneration. Construction Economics and Building, 20(2), pp. 89-108. ISSN 2204-9029

Akotia, J; Opoku, A; Egbu, C and Fortune, C (2016) Exploring the knowledge 'base' of practitioners in the delivery of sustainable regeneration projects. Construction Economics and Building, 16(2), pp. 14-26. ISSN 2204-9029

Akotia, J and Sackey, E (2018) Towards the delivery of sustainable regeneration projects' types in the UK: An exploration of the role and level of involvement of key practitioners. International Journal of Construction Management, 18(5), pp. 375-384. ISSN 1562-3599

Aksorn, T and Hadikusumo, B H W (2007) The unsafe acts and the decision-to-err factors of Thai construction workers. Journal of Construction in Developing Countries, 12(1), pp. 1-25. ISSN 1823-6499

Akter, J; Datta, S D; Islam, M; Tayeh, B A; Sraboni, S A and Das, N (2025) Assessment and analysis of the effects of implementing building information modelling as a lean management tool in construction management. International Journal of Building Pathology and Adaptation, 43(4), pp. 877-894. ISSN 2398-4708

Akujuru, V A and Ruddock, L (2015) Dichotomising compulsory land acquisition and land contamination valuations. International Journal of Disaster Resilience in the Built Environment, 6(3), pp. 268-288. ISSN 1759-5916

Akunyumu, S; Fugar, F and Adinyira, E (2024) Evaluation of risks affecting international construction joint venture (ICJV) projects in Ghana. Journal of Engineering, Design and Technology, 22(6), pp. 1797-1824. ISSN 1726-0531

Akunyumu, S; Fugar, F D K and Adinyira, E (2025) Assessing risk allocation preferences of partners in international construction joint venture projects in Ghana. Journal of Financial Management of Property and Construction, 30(1), pp. 111-136. ISSN 1366-4387

Al Awad, O S (2015) The uptake of advanced IT with specific emphasis on BIM by SMEs in the Jordanian construction industry. PhD thesis, University of Salford, UK.

Al Dairi, J S S (2017) The design and development of a knowledge-based lean six sigma maintenance system for sustainable buildings. PhD thesis, University of Bradford, UK.

Al Hasani, Mundhir Mahmood Abdullah (2019) An investigation into risk management practices in construction projects: The case of United Arab Emirates. PhD thesis, Bond University, Australia.

Al Hashemi, A (2011) Examining the relationship between migration, labour and crime in UAE: the case of Dubai. PhD thesis, University of Portsmouth, UK.

Al Hashmi, E (2016) Fire engineering in sustainable buildings: an evaluation for the application of performance-based design in Abu Dhabi. PhD thesis, University of Central Lancashire, UK.

Al Hatmi, H (2012) Business relationships: A cross-culture management investigation in the UAE construction industry. PhD thesis, Liverpool John Moores University, UK.

Al Hawsah, M O (2020) The impact of project sponsors' decisions on the success of projects: An action research study. PhD thesis, University of Liverpool, UK.

Al Hosani, S (2022) A framework for the implementation of 'Lean' construction principles in Engineering, Procurement and Construction (EPC) in the oil and gas industry. PhD thesis, Aberystwyth University, UK.

Al Hosni, I S; Amoudi, O and Callaghan, N (2020) An exploratory study on challenges of circular economy in the built environment in Oman. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(3), pp. 104-113. ISSN 17514304

Al Jashaami, Mohammed Ahmed Mohammed (2021) Improving delay management of construction projects by creating a systematic scoring scale to minimise/avoid delays. PhD thesis, Queensland University of Technology, Australia.

Al Jayyousi, A (2021) A critical examination of the relationship between project manager leadership style and project success in the United Arab Emirates construction industry. PhD thesis, California Southern University, USA.

Al Khatib, B A (2021) Determining the delay factors for reconstructed mega-project’s phases and the associated challenges. PhD thesis, University of Malaya, Malaysia.

Al Mousli, M H and El-Sayegh, S M (2016) Assessment of the design-construction interface problems in the UAE. Architectural Engineering and Design Management, 12(5), pp. 353-366. ISSN 1745-2007

Al Nahyan, Moza Tahnoon (2012) Management of mega infrastructure projects in the United Arab Emirates. PhD thesis, Monash University, Australia.

Al Neyadi, A (2019) Sustainable and digital strategies for enhancing United Arab Emirates construction industry competiveness. PhD thesis, University of Wolverhampton, UK.

Al Niyadi, R (2024) Public relations mediation in citizen engagement for Oman’s nation-building: The case of Oman vision 2040. PhD thesis, Lancaster University, UK.

Al Omari, Mohammad K (2025) Application of the AI-enabled unmanned aerial systems in resolving highway construction claims. PhD thesis, University of Illinois at Chicago, USA.

Al Qasimi, S K H (2019) The impact of implementing heritage elements in contemporary buildings in the United Arab Emirates. PhD thesis, University of Wolverhampton, UK.

Al Sanad, S A (2014) The promotion of sustainable construction practices in Kuwait. PhD thesis, University of Manchester, UK.

Al Saudi, I S A (2011) The impediments to the adoption of the design and build project procurement strategy in the Saudi construction industry. PhD thesis, Heriot-Watt University, UK.

Al Shamsi, H A A (2015) A framework for group leadership in the construction industry in Abu Dhabi. PhD thesis, University of Wolverhampton, UK.

Al Shamsi, S K (2019) Managing construction projects in the United Arab Emirates to gain competitive advantage. PhD thesis, University of Wolverhampton, UK.

Al Taie, Mohsin Shareef (2022) Applications of lean in construction: Benefits from using the Last Planner system. PhD thesis, Liberty University, USA.

Al Yahya, M; Skitmore, M; Bridge, A; Nepal, M and Cattell, D (2018) e-Tendering readiness in construction: the posterior model. Construction Innovation, 18(2), pp. 183-205. ISSN 1471-4175

Al Yami, H M A (2017) Decision making analysis for an integrated risk management framework of maritime container port infrastructure and transportation systems. PhD thesis, Liverpool John Moores University, UK.

Al kailani, H.; Bhattacharjee, K.; Bonilla, M. and Nnaji, C. (2026) Tailoring perceived workforce sustainability strategies in the US construction industry. Built Environment Project and Asset Management, pp. 1-18. ISSN 2044-124X

Al kailani, H.; Bhattacharjee, K.; Bonilla, M. and Nnaji, C. (2026) Tailoring perceived workforce sustainability strategies in the US construction industry. Built Environment Project and Asset Management, pp. 1-18. ISSN 2044-124X

Al-Abbadi, G M and Agyekum-Mensah, G (2022) The effects of motivational factors on construction professionals productivity in Jordan. International Journal of Construction Management, 22(5), pp. 820-831. ISSN 1562-3599

Al-Amin, Md (2023) Pavement maintenance and rehabilitation programming and budget allocation from strategic perspectives: Multiobjective optimization models. PhD thesis, University of Texas at Austin, USA.

Al-Atawi, S (2005) An ICT framework to improve the tendering process in the governmental construction sector in the Kingdom of Saudi Arabia. PhD thesis, University of Salford, UK.

Al-Atesh, E A; Rahmawati, Y; Zawawi, N A W A and Utomo, C (2023) A decision-making model for supporting selection of green building materials. International Journal of Construction Management, 23(5), pp. 922-933. ISSN 1562-3599

Al-Azemi, K (2012) Risk management for build, operate and transfer projects within Kuwait. PhD thesis, Loughborough University, UK.

Al-Barghouthi, M T (2010) Capturing tacit knowledge in the construction industry in Saudi Arabia. DM thesis, University of Phoenix, USA.

Al-Bayati, A J (2017) Managing workforce diversity in construction to improve communication and reduce fatalities (Hispanic workforce focus). PhD thesis, Western Michigan University, USA.

Al-Bayati, A J (2019) Satisfying the need for diversity training for Hispanic construction workers and their supervisors at US construction workplaces: A case study. Journal of Construction Engineering and Management, 145(6): 05019007, ISSN 0733-9364

Al-Bayati, A J; Abudayyeh, O; Fredericks, T and Butt, S E (2017) Reducing fatality rates of the Hispanic workforce in the U.S. Construction industry: Challenges and strategies. Journal of Construction Engineering and Management, 143(3): 04016105, ISSN 0733-9364

Al-Bazi, A and Dawood, N (2018) Simulation-based optimisation using simulated annealing for crew allocation in the precast industry. Architectural Engineering and Design Management, 14(1-2), pp. 109-126. ISSN 1745-2007

Al-Derham, H R (1999) The establishment of performance criteria for the evaluation of procurement of senior staff and private housing projects in the State of Qatar. PhD thesis, University of Glamorgan, UK.

Al-Fadhali, N (2024) An amos-SEM approach to evaluating stakeholders' influence on construction project delivery performance. Engineering, Construction and Architectural Management, 31(2), pp. 638-661. ISSN 0969-9988

Al-Gahtani, A S Z (1991) Construction claims for public and private projects in Saudi Arabia. DSc thesis, George Washington University, USA.

Al-Gahtani, K; Alsugair, A; Alsanabani, N; Alabduljabbar, A and Almutairi, B (2024) Forecasting delay-time model for Saudi construction projects using DEMATEL–sd technique. International Journal of Construction Management, 24(11), pp. 1225-1239. ISSN 1562-3599

Al-Ghassani, A M (2003) Improving the structural design process: a knowledge management approach. PhD thesis, Loughborough University, UK.

Al-Hachami, Z (2020) Decision making in the oil and gas construction project management: structured VS discretionary. PhD thesis, University of Liverpool, UK.

Al-Hajri, S N (2017) Public values and project management practices & processes in the public sector in the case of the State of Qatar. PhD thesis, Bangor University, UK.

Al-Hamadani, S; Egbelakin, T; Sher, W and von Meding, J K (2021) Drivers of applying ecological modernization to construction waste minimization in New South Wales construction industry. Construction Economics and Building, 21(3), pp. 80-104. ISSN 2204-9029

Al-Hashim, A; Benkari, N and Al-Saadi, S (2024) Evaluating the sustainable features of vernacular architecture in hot-arid regions: field surveys and analysis in two vernacular houses in Al Batinah region (Oman). Architectural Engineering and Design Management, 20(5), pp. 1118-1140. ISSN 1745-2007

Al-Hashimy, H. N. H. and Yao, J. (2026) The moderating effect of internet of things and wearable technologies on enhancing safety management in construction sites. Construction Innovation, 26(5), pp. 1384-1412. ISSN 1471-4175

Al-Hashimy, H. N. H. and Yao, J. (2026) The moderating role of electronic accounting information systems in enhancing efficiency in construction project management. Engineering, Construction and Architectural Management, 33(4), pp. 3308-3331. ISSN 0969-9988

Al-Hashimy, H. N. H.; Yao, J.; Pitchay, A. A. and Hussein, W. N. (2026) Linking computerised accounting information systems to innovation, resilience and performance in construction projects. Engineering, Construction and Architectural Management, pp. 1-21. ISSN 0969-9988

Al-Hashimy, H N H; Yao, J; Pitchay, A A and Hussein, W N (2026) Leveraging computerized accounting information systems for sustainable construction: The role of digital practices, eco-innovation, and organizational sustainability culture in enhancing project performance. Journal of Construction Engineering and Management, 152(5): 04026042, ISSN 0733-9364

Al-Hashimy, H N H (2025) The relationship between financial management strategies and firm financial performance: the moderating role of firm size. Journal of Financial Management of Property and Construction, 30(2), pp. 295-317. ISSN 1366-4387

Al-Hazmi, T A (1999) Project procurement system selection model (with particular reference to Saudi Arabia). PhD thesis, Loughborough University, UK.

Al-Hinai, A (2024) A hermeneutical approach to social value: A case study of national infrastructure planning in Oman. PhD thesis, University of Manchester, UK.

Al-Jallal, A A (1991) Technology adoption and innovation patterns in construction industry in Saudi Arabia: An exploratory study. PhD thesis, University of Texas at Austin, USA.

Al-Kayed, A. A.; Rotimi, F. E.; Purushothaman, M. B.; Pawley, M. and Ghaffarian Hoseini, A. (2026) Modelling the enablers of effective digital technology implementation for competitiveness enhancement among subcontracting organisations in new zealand's residential construction industry. Journal of Engineering, Design and Technology, 24(4), pp. 894-919. ISSN 1726-0531

Al-Keim, A (2017) Strategies to reduce cost overruns and schedule delays in construction projects. PhD thesis, Walden University, USA.

Al-Khiami, M. I. and Lindhard, Sø M. (2026) On-site evaluation of back-support exoskeleton effectiveness in construction: A multiple case study of physical performance, ergonomic comfort, and user acceptance among masonry workers. Journal of Construction Engineering and Management, 152(10): 04026167, ISSN 0733-9364

Al-Kofahi, Z G; Mahdavian, A and Oloufa, A (2022) System dynamics modeling approach to quantify change orders impact on labor productivity 1: Principles and model development comparative study. International Journal of Construction Management, 22(7), pp. 1355-1366. ISSN 1562-3599

Al-Lahham, Yazan (2019) Risk management approaches in SMEs: A study of owner-managers in Jordan. PhD thesis, University of Liverpool, UK.

Al-Mhdawi, M K S (2022) Risk management of construction projects under extreme conditions: a case study of Iraq. PhD thesis, University of Southampton, UK.

Al-Mhdawi, M K S; Brito, M; Onggo, B S; Qazi, A and O'Connor, A (2024) COVID-19 emerging risk assessment for the construction industry of developing countries: Evidence from Iraq. International Journal of Construction Management, 24(7), pp. 693-706. ISSN 1562-3599

Al-Mhdawi, M K S; Brito, M; Onggo, B S; Qazi, A; O'Connor, A and Namian, M (2023) Construction risk management in Iraq during the COVID-19 pandemic: Challenges to implementation and efficacy of practices. Journal of Construction Engineering and Management, 149(9): 04023086, ISSN 0733-9364

Al-Mhdawi, M K S; O'Connor, A; Qazi, A; Rahimian, F and Dacre, N (2025) Review of studies on risk factors in critical infrastructure projects from 2011 to 2023. Smart and Sustainable Built Environment, 14(2), pp. 342-376. ISSN 2046-6099

Al-Mohammad, M S; Haron, A T; Aloko, M N and Rahman, R A (2023) Factors affecting BIM implementation in post-conflict low-income economies: The case of Afghanistan. Journal of Engineering, Design and Technology, 21(1), pp. 299-318. ISSN 1726-0531

Al-Mohammad, M S; Haron, A T; Esa, M; Aloko, M N; Alhammadi, Y; Anandh, K S and Rahman, R A (2023) Factors affecting BIM implementation: Evidence from countries with different income levels. Construction Innovation, 23(3), pp. 683-710. ISSN 1471-4175

Al-Musleh, A M (2011) Development of a framework for total quality management principles in the construction companies with special reference to the construction companies in the state of Qatar. PhD thesis, Queen Mary University of London, UK.

Al-Mutairi, Y (2015) Development of implementation strategies for offsite construction techniques in the Kingdom of Saudi Arabia. PhD thesis, University of Salford, UK.

Al-Nabhani, S (2012) Graduate recruitment in Oman's private construction industry. PhD thesis, University of Salford, UK.

Al-Otaibi, M (2011) Evaluation of contractor performance for pre-selection in the Kingdom of Saudi Arabia. PhD thesis, Loughborough University, UK.

Al-Otaibi, S (2010) A framework for improving the performance of standard design models in the Saudi Ministry of Interior projects. PhD thesis, Loughborough University, UK.

Al-Qayoudhi, S. A. S.; Kamal, E. M. and Said, I. (2026) Improving total quality management implementation at the University of Technology and Applied Sciences in the Sultanate of Oman. Journal of Construction in Developing Countries, 30(Supp.), pp. 15-37. ISSN 1823-6499

Al-Rabady, R. (2026) Decolonising time: Vernacular villages and the politics of heritage temporality. Buildings & Cities, 7(1), pp. 740-756. ISSN 2632-6655

Al-Refaie, A; Alashwal, A; Abdul-Samad, Z; Salleh, H and Elshafie, A (2023) Evaluation of weather-productivity models of construction labour for tropics. Built Environment Project and Asset Management, 13(2), pp. 238-252. ISSN 2044-124X

Al-Rugaib, T A (1996) Project information, office automation, and quality in building production process in Saudi Arabia. PhD thesis, Cardiff University, UK.

Al-Saeed, Y; Parn, E; Edwards, D J and Scaysbrook, S (2019) A conceptual framework for utilising BIM digital objects (BDO) in manufacturing design and production: A case study. Journal of Engineering, Design and Technology, 17(5), pp. 960-984. ISSN 1726-0531

Al-Sakkaf, A; Bagchi, A; Zayed, T and Mahmoud, S (2023) Sustainability assessment model for heritage buildings. Smart and Sustainable Built Environment, 12(1), pp. 105-127. ISSN 2046-6099

Al-Sehali, J (2001) A framework for total quality management in the construction industry in Bahrain. PhD thesis, Loughborough University, UK.

Al-Shammaa, M M J (2019) Improving risk management in megaprojects. PhD thesis, University of Leeds, UK.

Al-Shammari, M A (2014) An appraisal of the protocol that was published by the construction industry council (CIC) to facilitate the use of building information modelling (BIM) on projects. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Al-Sibaie, E Z; Alashwal, A M; Abdul-Rahman, H and Zolkafli, U K (2014) Determining the relationship between conflict factors and performance of international construction projects. Engineering, Construction and Architectural Management, 21(4), pp. 369-382. ISSN 0969-9988

Al-Sinan, M A (2004) TQM and the construction industry: Saudi Arabia: a case study. PhD thesis, City, University of London, UK.

Al-Smadi, H; Al-Sakkaf, A; Zayed, T and Nasiri, F (2023) An integrated space-based building maintenance management model using multi-objective optimization. Smart and Sustainable Built Environment, 12(2), pp. 277-297. ISSN 2046-6099

Al-Sudairi, A A (2000) Evaluation of construction processes: Traditional practices versus lean principles. PhD thesis, University of Colorado at Boulder, USA.

Al-Suleiman, T I and Alatoom, Y I (2024) Development of pavement roughness regression models based on smartphone measurements. Journal of Engineering, Design and Technology, 22(4), pp. 1136-1157. ISSN 1726-0531

Al-Tabtabai, H (2002) Construction procurement strategy selection using analytical hierarchy process. Journal of Construction Procurement, 8(2), pp. 117-132. ISSN 1358-9180

Al-Tarazi, D.; Alkhamaiseh, M.; Sara, R.; Rice, L. and Booth, C. A. (2026) Insights of residents' satisfaction and well-being associated with the architectural design of domestic buildings. Journal of Engineering, Design and Technology, 24(1), pp. 151-170. ISSN 1726-0531

Al-Turfi, S (2017) Best practice project management for the sustainable regeneration of Holy Karbala Province in Iraq. PhD thesis, University of Bolton, UK.

Al-Wareh, M (1979) Investigation of the design procedures for buildings of quality in modern architecture, with notes on the relevant contemporary situation in Syria. PhD thesis, University of Sheffield, UK.

Al-Werikat, G K E (2017) The impact of supply chain management on construction projects performance in Jordan. PhD thesis, Coventry University, UK.

Al-Yami, A and Sanni-Anibire, M O (2021) BIM in the Saudi Arabian construction industry: State of the art, benefit and barriers. International Journal of Building Pathology and Adaptation, 39(1), pp. 33-47. ISSN 23984708

Al-Yami, A M H (2008) An integrated approach to value management and sustainable construction during strategic briefing in Saudi construction projects. PhD thesis, Loughborough University, UK.

Al-Zahrani, J I (2013) The impact of contractors' attributes on construction project success. PhD thesis, University of Manchester, UK.

Al-Zubi, M (2011) The impact of organizational culture on knowledge sharing in the construction sector in Jordan. PhD thesis, University of Salford, UK.

AlAbbadi, G (2020) Development of a framework towards enhancing workers productivity in the Jordanian construction industry. PhD thesis, Coventry University, UK.

AlBughdadi, A J M (2022) Advanced decision support tools for bridge asset management. PhD thesis, Iowa State University, USA.

AlKheder, S; Al Otaibi, H; Al Baghli, Z; Al Ajmi, S and Alkhedher, M (2025) Analytic hierarchy process (AHP) assessment of Kuwait mega construction projects' complexity. Engineering, Construction and Architectural Management, 32(3), pp. 1903-1946. ISSN 0969-9988

AlKheder, S; AlKandari, D and AlYatama, S (2022) Sustainable assessment criteria for airport runway material selection: A fuzzy analytical hierarchy approach. Engineering, Construction and Architectural Management, 29(8), pp. 3091-3113. ISSN 0969-9988

AlMaian, R Y; Needy, K L; Walsh, K D and Alves, T D C L (2016) A qualitative data analysis for supplier quality-management practices for engineer-procure-construct projects. Journal of Construction Engineering and Management, 142(2): 04015061, ISSN 0733-9364

Alabi, A S; Adegbile, M; Alabi, O; Abisuga, O; Oyewole, K and Oshodi, O (2017) Stakeholders' role in disaster-risk-reduction of fire occurrences in Lagos metropolis. International Journal of Disaster Resilience in the Built Environment, 8(4), pp. 425-440. ISSN 1759-5916

Alac, R; Hammad, A W A; Hadigheh, A and Opdyke, A (2025) A multi-criteria approach to egress location selection in buildings: Integrating economic, technical and social factors. Engineering, Construction and Architectural Management, 32(12), pp. 8304-8325. ISSN 0969-9988

Aladağ, H and Işık, Z (2019) Design and construction risks in BOT type mega transportation projects. Engineering, Construction and Architectural Management, 26(10), pp. 2223-2242. ISSN 0969-9988

Alade, K and Windapo, A O (2021) Developing effective 4IR leadership framework for construction organisations. Engineering, Construction and Architectural Management, 28(5), pp. 1377-1396. ISSN 0969-9988

Alade, W A (2020) Environmental and socio-economic impacts of Ojodu-Berger Road upgrade, Lagos, Nigeria. Journal of Construction Business and Management, 4(1), pp. 24-33. ISSN 2521-0165

Alaghbari, W; Kadir, M R A and Salim, A (2007) The significant factors causing delay of building construction projects in Malaysia. Engineering, Construction and Architectural Management, 14(2), pp. 192-206. ISSN 0969-9988

Alajmani, H; Ahmed, S and El-Sayegh, S M (2024) Factors causing delays in the UAE construction industry amid the covid-19 pandemic. Journal of Financial Management of Property and Construction, 29(1), pp. 135-151. ISSN 1366-4387

Alaka, H; Oyedele, L; Toriola-Coker, O; Owolabi, H; Akinade, O; Bilal, M and Ajayi, S (2015) Methodological approach of construction businesses failure prediction studies: A review. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Alaka, H A (2017) 'Big data analytics' for construction firms insolvency prediction models. PhD thesis, University of the West of England, Bristol, UK.

Alaka, H A; Oyedele, L O; Owolabi, H A; Ajayi, S O; Bilal, M and Akinade, O O (2016) Methodological approach of construction business failure prediction studies: A review. Construction Management and Economics, 34(11), pp. 808-842. ISSN 01446193

Alaka, H A; Oyedele, L O; Owolabi, H A; Oyedele, A A; Akinade, O O; Bilal, M and Ajayi, S O (2017) Critical factors for insolvency prediction: Towards a theoretical model for the construction industry. International Journal of Construction Management, 17(1), pp. 25-49. ISSN 1562-3599

Alam, A; Bhat, M S; Farooq, H; Ahmad, B; Ahmad, S and Sheikh, A H (2018) Flood risk assessment of srinagar city in Jammu and Kashmir, India. International Journal of Disaster Resilience in the Built Environment, 9(2), pp. 114-129. ISSN 1759-5916

Alam, M S and Haque, S M (2020) Seismic vulnerability evaluation of educational buildings of Mymensingh City, Bangladesh using rapid visual screening and index based approach. International Journal of Disaster Resilience in the Built Environment, 11(3), pp. 379-402. ISSN 1759-5916

Alameri, H (2018) A resource-based perspective of project success in public sector projects in Abu Dhabi. PhD thesis, Bournemouth University, UK.

Alamil, H M (2022) Knowledge sharing within the Kingdom of Saudi Arabia large construction organisations. PhD thesis, University of Wolverhampton, UK.

Alamoudi, A K; Abidoye, R B and Lam, T Y M (2024) An evaluation of stakeholders' participation process in developing smart sustainable cities in Saudi Arabia. Smart and Sustainable Built Environment, 13(5), pp. 1074-1095. ISSN 2046-6099

Alamri, R (2019) Development of a model for health and safety management in Saudi Arabian oil and gas construction projects. PhD thesis, University of Wolverhampton, UK.

Alankarage, S; Chileshe, N; Rameezdeen, R; Edwards, D J and Samaraweera, A (2023) Exploring BIM-triggered organisational and professional culture change: A systematic literature review. Construction Innovation, 23(1), pp. 229-247. ISSN 1471-4175

Alankarage, S; Chileshe, N; Samaraweera, A; Rameezdeen, R and Edwards, D J (2023) Guidelines for using a case study approach in construction culture research: Application to BIM-enabled organizations. Journal of Construction Engineering and Management, 149(9): 05023009, ISSN 0733-9364

Alankarage, S; Chileshe, N; Samaraweera, A; Rameezdeen, R and Edwards, D J (2023) Organisational BIM maturity models and their applications: A systematic literature review. Architectural Engineering and Design Management, 19(6), pp. 567-585. ISSN 1745-2007

Alao, O O; Jagboro, G O and Opawole, A (2018) Cost and time implications of abandoned project resuscitation: A case study of educational institutional buildings in Nigeria. Journal of Financial Management of Property and Construction, 23(2), pp. 185-201. ISSN 1366-4387

Alaqad, M (2021) Critical success factors for integration of value, financial risk, and environmental management systems in medium sized design and build projects. PhD thesis, University of Brighton, UK.

Alaqad, M; Gidado, K; Piroozfar, P; Alkhadim, M and Dorgham, A (2020) Efficacy of value management system in building projects: A UK perspective. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Alasad, R (2015) Dynamic modelling of demand risk in PPP infrastructure projects: the case of toll roads. PhD thesis, Heriot-Watt University, UK.

Alashwal, A M and Al-Sabahi, M H (2018) Risk factors in construction projects during unrest period in Yemen. Journal of Construction in Developing Countries, 23(2), pp. 43-62. ISSN 1823-6499

Alashwal, A M and Chew, M Y (2017) Simulation techniques for cost management and performance in construction projects in Malaysia. Built Environment Project and Asset Management, 7(5), pp. 534-545. ISSN 2044-124X

Alashwal, N and Alashwal, A (2023) Rural access programs in Yemen: Delay of international funded road projects. Engineering, Construction and Architectural Management, 30(4), pp. 1746-1767. ISSN 0969-9988

Alattyih, W H (2015) Value creation and risk assessment for green building design in Saudi Arabia. PhD thesis, University of Liverpool, UK.

Alavi, P; Sobouti, H and Shahbazi, M (2024) Adaptive re-use of industrial heritage and its role in achieving local sustainability. International Journal of Building Pathology and Adaptation, 42(6), pp. 1223-1249. ISSN 2398-4708

Alazemi, W (2013) Total quality management within the construction industry of Kuwait: the role of Total Quality Management and its usage. PhD thesis, Loughborough University, UK.

Alazzam, M. and Celoza, A. (2026) Current state of supplier qualification in capital projects: Factors, practices, and industry perspectives. Journal of Construction Engineering and Management, 152(8): 04026111, ISSN 0733-9364

Alazzaz, F and Whyte, A (2015) Linking employee empowerment with productivity in off-site construction. Engineering, Construction and Architectural Management, 22(1), pp. 21-37. ISSN 0969-9988

Albagoury, S. H. and AbdelMaksoud, K. M. (2026) Integrating socio-economic impact assessment into the reconstruction plan for Derna, Libya. International Journal of Disaster Resilience in the Built Environment, pp. 1-13. ISSN 1759-5908

Albalawi, R K (2023) Comprehensive analysis of the multiskilling strategy among craft professionals in the construction industry. PhD thesis, University of Colorado at Boulder, USA.

Albano, L D (1992) An axiomatic approach to performance-based design. PhD thesis, Massachusetts Institute of Technology, USA.

Albar, A M (2022) The design and development of an intelligent adaptive extrusion system for additive manufacturing robotics in construction using advanced cementitious materials. PhD thesis, Brunel University, UK.

Albayoudh, K A F (2003) Assessment of total quality management in the Saudi construction industry organisations. PhD thesis, Loughborough University, UK.

Albeaino, G; Eiris, R; Gheisari, M and Issa, R R (2022) Dronesim: A VR-based flight training simulator for drone-mediated building inspections. Construction Innovation, 22(4), pp. 831-848. ISSN 1471-4175

Albeiro Alberto Aguilar, O and Saúl Tomás Salas, S (2021) Good practices of labor welfare and environmental protection in potato crops in Colombia: A way to contribute to the sustainable development of colombian agriculture. Smart and Sustainable Built Environment, 10(1), pp. 51-66. ISSN 2046-6099

Albert, A (2013) Strategies for construction hazard recognition. PhD thesis, University of Colorado at Boulder, USA.

Albert, A; Hallowell, M R; Lingard, H and Kleiner, B M (2015) Multiple baseline testing: Experimental method for drawing causal inferences in construction engineering and management research. Journal of Construction Engineering and Management, 141(7): 4015012, ISSN 0733-9364

Albert, I (2020) A lean production approach to materials management in the Nigerian construction industry. PhD thesis, Nelson Mandela University, South Africa.

Alblooshi, M (2021) Exploring the influence of management style on job satisfaction: The case of construction companies in Abu Dhabi, the United Arab Emirates (UAE). PhD thesis, Liverpool John Moores University, UK.

Albogamy, A and Dawood, N (2015) Development of a client-based risk management methodology for the early design stage of construction processes: Applied to the KSA. Engineering, Construction and Architectural Management, 22(5), pp. 493-515. ISSN 0969-9988

Aldawaish, B (2019) Investigating the relationship between top management teams' characteristics and organisational innovation: the mediating role of dynamic capabilities. PhD thesis, Brunel University, UK.

Aldhaheri, M; Bakchan, A and Sandhu, M A (2018) A structural equation model for enhancing effectiveness of engineering, procurement and construction (EPC) major projects: End-user's perspective. Engineering, Construction and Architectural Management, 25(9), pp. 1226-1252. ISSN 0969-9988

Aldhaheri, Mohammed (2023) Developing smart prisons in the United Arab Emirates. PhD thesis, Queensland University of Technology, Australia.

Aldhanhani, M A A (2018) Enablers and barriers to knowledge sharing in the UAE infrastructural projects. PhD thesis, British University in Dubai, UAE.

Aldossari, K M; Lines, B C; Smithwick, J B; Hurtado, K C and Sullivan, K T (2021) Best practices of organizational change for adopting alternative project delivery methods in the AEC industry. Engineering, Construction and Architectural Management, 28(4), pp. 1060-1082. ISSN 0969-9988

Aldossari, K M A (2020) Organizational change management for the adoption of alternative project delivery methods within the AEC industry. PhD thesis, Arizona State University, USA.

Alemayehu, S; Nejat, A; Ghebrab, T and Ghosh, S (2022) A multivariate regression approach toward prioritizing BIM adoption barriers in the Ethiopian construction industry. Engineering, Construction and Architectural Management, 29(7), pp. 2635-2664. ISSN 0969-9988

Alenazi, E O N (2018) Using BIM for delay management in public sector construction projects in KSA. PhD thesis, Loughborough University, UK.

Alencastro, J; Fuertes, A and de Wilde, P (2024) Investigating the influence of quality management on building thermal performance. Engineering, Construction and Architectural Management, 31(8), pp. 3356-3376. ISSN 0969-9988

Alexander, D; Hallowell, M and Gambatese, J (2017) Precursors of construction fatalities. I: Iterative experiment to test the predictive validity of human judgment. Journal of Construction Engineering and Management, 143(7): 04017023, ISSN 0733-9364

Alfandi, G R (2015) Investigating risk management capability of construction firms in the Gulf Cooperation Council (GCC) countries. PhD thesis, Brunel University, UK.

Algahtany, M (2018) Assessment and development of contractors' mitigation practices towards risks out of contractors' control in the Saudi construction industry. PhD thesis, Arizona State University, USA.

Algarni, A M; Arditi, D and Polat, G (2007) Build-operate-transfer in infrastructure projects in the United States. Journal of Construction Engineering and Management, 133(10), pp. 728-735. ISSN 0733-9364

Algassim, Hesham M (2024) Developing an architectural technology adoption model considering organizational factors: Case of Saudi Arabia. PhD thesis, University of New South Wales, Australia.

Alghamdi, A M (2022) A systemic approach for construction contract claims settlement in the Kingdom of Saudi Arabia. PhD thesis, University of Reading, UK.

Algithami, S M (2017) The use of a system dynamics approach for modelling maturity of total quality management in Saudi construction firms. PhD thesis, University of Reading, UK.

Alhaddad, H. and Galal Ahmed, K. (2026) Informal household-practiced urban agriculture as a contributor to sustainability and resilience: The case of emirati neighbourhoods. Smart and Sustainable Built Environment, 15(3), pp. 1085-1114. ISSN 2046-6099

Alhajeri, M (2011) Health and safety in the construction industry: challenges and solutions in the UAE. PhD thesis, Coventry University, UK.

Alhalafi, M (2021) Develop a lean project management framework for the construction companies in order to improve the time and cost efficiencies of their construction operations. PhD thesis, De Montfort University, UK.

Alhallaq, M. and Artan, D. (2026) Assessing contractors' circular economy performance: Barriers and system requirements. International Journal of Building Pathology and Adaptation, pp. 1-20. ISSN 2398-4708

Alhamoudi, A. M. and Osunsanmi, T. O. (2026) Modelling the training strategies for reskilling UK construction workers in the Fourth Industrial Revolution era: A structural equation model approach. Smart and Sustainable Built Environment, 15(5), pp. 1967-1990. ISSN 2046-6099

Alhanshi, M A M (2019) Examining the management of strategic resources in projects. PhD thesis, University of Hull, UK.

Alharbi, F (2020) Critical delay factors in housing construction projects in Saudi Arabia: Assessment and solutions. PhD thesis, Nottingham Trent University, UK.

Alharbi, M (2013) Architectural management: a strategic framework to achieve competitiveness. PhD thesis, Loughborough University, UK.

Alharbi, M; Emmitt, S and Demian, P (2015) What is architectural management? Towards a pragmatic definition. Engineering, Construction and Architectural Management, 22(2), pp. 151-168. ISSN 0969-9988

Alharbi, S (2020) The influence of human resources management on job embeddedness and voluntary turnover intention: a case study of the constructions industry in Saudi Arabia. PhD thesis, University of Plymouth, UK.

Alharmoodi, S (2017) The effect of stakeholder integration on open innovation in construction projects. PhD thesis, British University in Dubai, UAE.

Alhassan, T.; Ameyaw, S.; Kpamma, Z. E. and Ako-Adjei, J. T. (2026) Sustaining educational infrastructure: An assessment of facilities maintenance management practices in selected public higher education institutions in northern Ghana. International Journal of Building Pathology and Adaptation, 44(4), pp. 1046-1061. ISSN 2398-4708

Alhassan, T.; Owusu-Ansah, A.; Kidido, J. K. and Adjei-Twum, A. (2026) Climate change adaptation in facilities management: A systematic literature review. International Journal of Building Pathology and Adaptation, 44(4), pp. 867-884. ISSN 2398-4708

Alhawamdeh, M (2020) An interpretivist approach for the development of a behavioural framework to support the adoption of waste minimisation behaviour of contractors: the case study of Jordan. PhD thesis, University of Salford, UK.

Alhazmi, T and McCaffer, R (2000) Project procurement system selection model. Journal of Construction Engineering and Management, 126(3), pp. 176-184. ISSN 0733-9364

Alhemoud, A M (1996) The development and testing of a comprehensive tool for assessing the effectiveness of occupational safety and health programs. PhD thesis, University of Cincinnati, USA.

Alhiddi, A M (2022) Building better together: The relationship between organisational culture and stakeholder critical success factors in construction projects. PhD thesis, University of Northumbria at Newcastle, UK.

Alhmoudi, A A and Aziz, Z (2016) Integrated framework for early warning system in UAE. International Journal of Disaster Resilience in the Built Environment, 7(4), pp. 361-373. ISSN 1759-5916

Alhumaidi, H M (2015) Construction contractors ranking method using multiple decision-makers and multiattribute fuzzy weighted average. Journal of Construction Engineering and Management, 141(4): 04014092, ISSN 0733-9364

Alhumayani, H (2022) The feasibility of 3D printing technology as a new construction method for houses in Saudi Arabia. PhD thesis, Cardiff University, UK.

Alhumayn, S A (2018) Developing a framework for BIM implementation in the saudi arabian construction industry. PhD thesis, University of Wolverhampton, UK.

Alhusban, A A; Alhusban, S A and Alhusban, M A (2022) How the COVID 19 pandemic would change the future of architectural design. Journal of Engineering, Design and Technology, 20(1), pp. 339-357. ISSN 1726-0531

Alhusban, A A and Almshaqbeh, S N (2024) Delivering an inclusive built environment for physically disabled people in public universities (Jordan as a case study). Journal of Engineering, Design and Technology, 22(6), pp. 1980-1998. ISSN 1726-0531

Alhusban, M; Elghaish, F; Hosseini, M R and Mayouf, M (2025) Revamping established project procurement approaches to support BIM implementation. Smart and Sustainable Built Environment, 14(3), pp. 672-695. ISSN 2046-6099

Alhusban, M; Nasereddin, M; Alghossoon, A and Hatamleh, M T (2025) A hybrid conceptual procurement framework for BIM uptake to enhance buildings' sustainability performance in the Jordanian public sector. International Journal of Building Pathology and Adaptation, 43(1), pp. 93-116. ISSN 2398-4708

Ali, A.; Zhifeng, S.; Tahir, M.; Ye, Y.; Wang, G.; Wei, X. and Zang, X. (2026) Enhancing megaproject performance by integrating artificial intelligence, human-robot collaboration, and BIM-integration management: The moderating role of top management support. Journal of Construction Engineering and Management, 152(7): 04026094, ISSN 0733-9364

Ali, J A; Al-Kharusi, S; Khwaja, M G; Razzak, M R and Bashir, S (2025) Requirement engineering and project performance: Mediating effect of communication effectiveness, change readiness, stakeholder engagement and moderating effect of team cohesion. Engineering, Construction and Architectural Management, 32(8), pp. 5484-5507. ISSN 0969-9988

Ali, A B M (2019) A composite index for enhancing sustainability within public housing projects in Libya. PhD thesis, University of Salford, UK.

Ali, A H; Elyamany, A; Ibrahim, A H; Kineber, A F and Daoud, A O (2024) Modelling the relationship between modular construction adoption and critical success factors for residential projects in developing countries. International Journal of Construction Management, 24(12), pp. 1314-1325. ISSN 1562-3599

Ali, A H; Kineber, A F; Elyamany, A; Hussein Ibrahim, A and Daoud, A O (2025) Exploring stationary and major modular construction challenges in developing countries: A case study of Egypt. Journal of Engineering, Design and Technology, 23(2), pp. 569-598. ISSN 1726-0531

Ali, A H; Kineber, A F; Elyamany, A; Ibrahim, A H and Daoud, A O (2025) Application of Ginni's mean analysis for identifying the stationary driver enhancing modular construction adoption in the building industry. International Journal of Construction Management, 25(3), pp. 322-333. ISSN 1562-3599

Ali, A S; Azmi, N F and Baaki, T K (2018) Cost performance of building refurbishment works: The case of Malaysia. International Journal of Building Pathology and Adaptation, 36(1), pp. 41-62. ISSN 23984708

Ali, B; Aibinu, A A and Paton-Cole, V (2024) Closing the information gaps: A systematic review of research on delay and disruption claims. Construction Innovation, 24(3), pp. 790-810. ISSN 1471-4175

Ali, I; Peng, C; Ullah, H; Deng, J; Bibi, A and Mahar, W A (2025) Multi-objective optimization of insulation materials for building energy and comfort improvements in hot and arid regions. Building Research & Information, 53(6), pp. 797-816. ISSN 0961-3218

Ali, M M A (2011) A framework for enhancing the success of construction projects undertaken in Libya. PhD thesis, Sheffield Hallam University, UK.

Ali, R A; Mannakkara, S and Wilkinson, S (2020) Factors affecting successful transition between post-disaster recovery phases: A case study of 2010 floods in Sindh, Pakistan. International Journal of Disaster Resilience in the Built Environment, 11(5), pp. 597-614. ISSN 1759-5916

Ali, S (2022) Identification of key factors that aid the decision on whether to refurbish-reuse or demolish-rebuild existing and newly designed buildings and highways. PhD thesis, London South Bank University, UK.

Ali, Tauha H (2006) Influence of national culture on construction safety climate in Pakistan. PhD thesis, Griffith University, Pakistan.

Ali Amjad, A (2003) A causal path model to measure the effects of professional training upon time overruns in Saudi construction industry. PhD thesis, Heriot-Watt University, UK.

Aliero, B A (1994) Utilisation of environmental impact assessment technique in the assessment of impact of human interference on natural ecology of estuaries: a case study of Mersey Estuary. PhD thesis, University of Salford, UK.

Alikhani, H; Le, C; Jeong, H D and Damnjanovic, I (2023) Sequential machine learning for activity sequence prediction from daily work report data. Journal of Construction Engineering and Management, 149(9): 04023082, ISSN 0733-9364

Alinaitwe, H and Ayesiga, R (2013) Success factors for the implementation of public-private partnerships in the construction industry in Uganda. Journal of Construction in Developing Countries, 18(2), pp. 1-14. ISSN 1823-6499

Alinaitwe, H M (2009) Prioritising lean construction barriers in Uganda's construction industry. Journal of Construction in Developing Countries, 14(1), pp. 15-30. ISSN 1823-6499

Alinaitwe, H M; Widén, K; Mwakali, J and Hansson, B (2007) Innovation barriers and enablers that affect productivity in Uganda building industry. Journal of Construction in Developing Countries, 12(1), pp. 59-75. ISSN 1823-6499

Aliu, J and Aigbavboa, C O (2020) Employers’ perception of employability skills among built-environment graduates. Journal of Engineering, Design and Technology, 18(4), pp. 847-864. ISSN 1726-0531

Aliu, J and Oke, A E (2023) Construction in the digital age: Exploring the benefits of digital technologies. Built Environment Project and Asset Management, 13(3), pp. 412-429. ISSN 2044-124X

Aliu, J; Oke, A E; Abayomi, T; Aigbavboa, C and Makanjuola, S (2024) Exploring the critical success factors for adopting gamification in the Nigerian construction sector. Built Environment Project and Asset Management, 14(2), pp. 184-200. ISSN 2044-124X

Aljagoub, D (2025) Enhancing delamination detection and monitoring of concrete bridges through infrared thermography, deep learning, field data, and numerical simulations. PhD thesis, University of Delaware, USA.

Aljarman, M (2016) Emerging risk from the application of building information modelling through the life cycle of projects. PhD thesis, University of Liverpool, UK.

Aljassmi, H; Han, S and Davis, S (2016) Analysis of the complex mechanisms of defect generation in construction projects. Journal of Construction Engineering and Management, 142(2): 04015063, ISSN 0733-9364

Aljassmi, Hamad Abdulla (2013) Analysis of complex mechanisms of defect generation in construction projects. PhD thesis, University of New South Wales, Australia.

Aljassmi, Hamad Abdulla (2013) Analysis of complex mechanisms of defect generation in construction projects generation in construction projects. PhD thesis, University of New South Wales, Australia.

Aljohani, A (2019) Cost overrun causality model in Saudi Arabian public sector construction projects. PhD thesis, Robert Gordon University, UK.

Alkaabi, J A (1994) Improved materials management using automatic identification techniques. PhD thesis, Loughborough University, UK.

Alkamali, A (2025) Investing in biophilic design integration for stakeholders. PhD thesis, Arizona State University, USA.

Alkatheeri, A (2018) An investigative study on the relationship between organizational factors and knowledge management effectiveness in UAE public organizations: the case study of Abu Dhabi. PhD thesis, University of Wolverhampton, UK.

Alketbi, S R (2020) Effective implementation of value engineering in the housing construction programmes of the UAE. PhD thesis, University of Wolverhampton, UK.

Alkhalifah, S J; Tuffaha, F M; Al Hadidi, L A and Ghaithan, A (2023) Factors influencing change orders in oil and gas construction projects in Saudi Arabia. Built Environment Project and Asset Management, 13(3), pp. 430-452. ISSN 2044-124X

Alkhamali, K S H (2014) Leadership style, organisational culture and disputes in public construction. PhD thesis, Heriot-Watt University, UK.

Alkhard, A (2016) Analysis of influencing factors on safety culture in the construction industry of Saudi Arabia. PhD thesis, University of Florida, USA.

Alkharmany, A (2017) Project management: The effect of saudi national culture on the attitudes of key stakeholders towards delay in construction projects in Saudi Arabia. PhD thesis, University of Brighton, UK.

Alkhorayef, A N M (2014) Improving decision making on large scale investment projects: A psychological perspective. PhD thesis, University of Leeds, UK.

Alkhraisha, A (2023) Approaches for enhancing the construction and demolition waste management strategy in Jordan. PhD thesis, Anglia Ruskin University, UK.

Alkilani, S and Loosemore, M (2022) Project performance measurement for small-and-medium sized construction contractors in the Jordanian construction industry. Construction Management and Economics, 40(10), pp. 743-769. ISSN 01446193

Alkilani, S and Loosemore, M (2024) An investigation of how stakeholders influence construction project performance: A small and medium sized contractor's perspective in the Jordanian construction industry. Engineering, Construction and Architectural Management, 31(3), pp. 1272-1297. ISSN 0969-9988

Alkilani, S Z; Jupp, J and Sawhney, A (2013) Issues of construction health and safety in developing countries: A case of Jordan. Construction Economics and Building, 13(3), pp. 141-156. ISSN 2204-9029

Alkinani, H (2014) Models of training needs assessment for the Iraqi construction industry. PhD thesis, University of Salford, UK.

Allam, A; Elbeltagi, E; Abouelsaad, M N and E. El Madawy, M (2026) Integrated BIM-GA approach for slab formwork design optimization. Construction Innovation, 26(2), pp. 631-651. ISSN 1471-4175

Allan, B; Sweis, R and Sweis, G (2026) Assessing the challenges affecting blockchain adoption in the Jordanian construction industry: Pestel framework approach. Built Environment Project and Asset Management, 16(2), pp. 357-376. ISSN 2044-124X

Allender, C; Sutrisna, M and Zaman, A U (2017) Towards developing robust climate risk management strategies in the estuarine park of the Swan River, Western Australia. International Journal of Disaster Resilience in the Built Environment, 8(4), pp. 441-462. ISSN 1759-5916

Almadhoob, Huda Mohamed Ali Hasan Husain (2020) Self-organising networks in complex infrastructure projects: the case of London Bank Station Capacity Upgrade Project. PhD thesis, University College London, UK.

Almahmoud, Essam (2014) Social sustainability health check: A model for evaluating and optimising social value creation in construction projects. PhD thesis, University of Melbourne, Australia.

Almalki, M (2024) Accelerated wastewater pipeline construction. PhD thesis, Syracuse University, USA.

Almalki, T S (2015) A study of the influence of trust on the relationships between team members in engineering projects. PhD thesis, University of Dundee, UK.

Almami, A (2014) Investigating the antecedents and consequences of Saudization in the construction sector. PhD thesis, University of Plymouth, UK.

Almarri, K; Aljarman, M and Boussabaine, H (2019) Emerging contractual and legal risks from the application of building information modelling. Engineering, Construction and Architectural Management, 26(10), pp. 2307-2325. ISSN 0969-9988

Almarri, K; Alzahrani, S and Boussabaine, H (2019) An evaluation of the impact of risk cost on risk allocation in public private partnership projects. Engineering, Construction and Architectural Management, 26(8), pp. 1696-1711. ISSN 0969-9988

Almarri, K and Boussabaine, H (2017) Interdependency of the critical success factors and ex-post performance indicators of PPP projects. Built Environment Project and Asset Management, 7(5), pp. 546-556. ISSN 2044-124X

Almarri, K; Boussabaine, H and Al Nauimi, H (2023) The influence of risks on the outturn cost of ICT infrastructure network projects. Construction Innovation, 23(1), pp. 85-104. ISSN 1471-4175

Almasabha, G; Shehadeh, A; Alshboul, O and Al Hattamleh, O (2024) Structural performance of buried reinforced concrete pipelines under deep embankment soil. Construction Innovation, 24(5), pp. 1280-1296. ISSN 1471-4175

Almatari, H A Q; Chan, M and Masrom, M A N (2024) Factors inhibiting the adoption of industrial revolution 4.0 in malaysian construction industry. Smart and Sustainable Built Environment, 13(4), pp. 1041-1065. ISSN 2046-6099

Almatroushi, H; Hariga, M; As'ad, R and Al-Bar, A (2020) The multi resource leveling and materials procurement problem: An integrated approach. Engineering, Construction and Architectural Management, 27(9), pp. 2135-2161. ISSN 0969-9988

Almeida, L; Tam, V W Y; Le, K N and She, Y (2020) Effects of occupant behaviour on energy performance in buildings: A green and non-green building comparison. Engineering, Construction and Architectural Management, 27(8), pp. 1939-1962. ISSN 0969-9988

Almohssen, Abdulaziz (2018) A new methodology for tracking the performance of subcontractors in the construction industry. PhD thesis, University of New South Wales, Australia.

Almughrabi, F M; Samarasinghe, D A S and Rotimi, F E (2021) Analysis of skill shortages in prefabricated residential construction: A case for New Zealand. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Almutairi, A M S (2017) Protecting the rights of temporary foreign 'low-skilled' workers in the Saudi construction industry: a case for legal reform. PhD thesis, Brunel University, UK.

Almutairi, M (2019) The influence of national culture on health and safety performance in Kuwait oil and gas sector construction projects. PhD thesis, University of Salford, UK.

Almutairi, S (2017) Assessment and develop the Saudi's contractors classification system. PhD thesis, Arizona State University, USA.

Alnaser, A A (2018) The implication of BIM use on communication channels in design processes for Saudi architectural engineering firms. PhD thesis, University of Reading, UK.

Alnasseri, N (2015) Managing and controlling airport construction projects: a strategic management framework for operators. PhD thesis, Northumbria University, UK.

Alnasseri N, O A S G (2013) Organizational culture, leadership style and effectiveness: A case study of middle eastern construction clients. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Alnsour, J A M (2006) Planning and managing the built environment in the context of compliance with residential standards in Jordan. PhD thesis, University of Huddersfield, UK.

Alnuaimi, N T; Chatha, K A and Abdallah, S (2025) Role of big data analytics and information processing capabilities in enhancing transparency and accountability in e-procurement applications. Journal of Engineering, Design and Technology, 23(5), pp. 1729-1750. ISSN 1726-0531

Alofi, A (2017) Improving the Saudi Arabia procurement system: Perception and development of the construction industry. PhD thesis, Arizona State University, USA.

Along, N Z B; Ahmed, I and MacKee, J (2024) Flood knowledge management by multiple stakeholders: An example from Malaysia. International Journal of Disaster Resilience in the Built Environment, 15(1), pp. 141-157. ISSN 1759-5916

Alosaimi, H (2019) Embedding knowledge management strategies in the Kingdom of Saudi Arabia construction industry. PhD thesis, University of Wolverhampton, UK.

Alotaibi, S S (2016) The international contractor's decision to invest: a strategic risk management decision model for public private partnership projects in Saudi Arabia. PhD thesis, Heriot-Watt University, UK.

Alqahtani, A (2019) An appraisal of the role of project management offices (PMO) in promoting knowledge management (km) within KSA construction companies. PhD thesis, University of Salford, UK.

Alqahtani, A (2019) An appraisal of the role of project management offices in promoting knowledge management within KSA construction companies. PhD thesis, University of Salford, UK.

Alqahtani, A and Whyte, A (2016) Evaluation of non-cost factors affecting the life cycle cost: An exploratory study. Journal of Engineering, Design and Technology, 14(4), pp. 818-834.

Alqahtani, D (2022) A sustainability assessment framework for public-private partnerships (PPPs) in highway projects. PhD thesis, Syracuse University, USA.

Alqahtani, F (2017) The relationship between the values of Abu-Dhabi Police and the competencies of their project managers. PhD thesis, University of Wolverhampton, UK.

Alqarni, K H (2018) A case study of information technology acceptance in the Saudi Arabian architecture, engineering and construction industry. PhD thesis, University of Reading, UK.

Alqasmi, Khalaf (2019) An investigation of unethical practices in the Saudi Arabian construction industry. PhD thesis, RMIT University, Australia.

Alqershy, M T and Kishore, R (2023) Construction claims prediction using ann models: A case study of the Indian construction industry. International Journal of Construction Management, 23(6), pp. 1097-1108. ISSN 1562-3599

Alqershy, M T; Shi, Q and Anbar, D R (2025) Analysing the interplay of isomorphic pressures, perceived benefits and top management support on social responsibility performance of Belt and Road megaprojects. Engineering, Construction and Architectural Management, 32(6), pp. 4074-4099. ISSN 0969-9988

Alqubaisi, S (2019) Developing a framework to assess the portfolio governance, risk and compliance of Abu Dhabi Government entities in the UAE. PhD thesis, Aston University, UK.

Alqudah, H E (2022) The Interaction Between the Main Determinants of Construction Organisational Performance in New Zealand. PhD thesis, Auckland University of Technology, New Zealand.

Alrajehi, S H (2014) Importance of KPI identification and implementation in Kuwaiti construction industry. PhD thesis, Brunel University, UK.

Alrasheed, Haitham (2015) A socio-ecological framework for improving the psychological health of foreign workers in developing countries: The case of saudi construction industry. PhD thesis, University of New South Wales, Australia.

Alremeithi, A A; Riaz, Z and Khan, M (2025) What constitutes citizens' recycling behavior: Insights from handling municipal solid waste in the UAE. Smart and Sustainable Built Environment, 14(4), pp. 1017-1037. ISSN 2046-6099

Alsahli, A (2011) A framework for successful implementation of IT for the construction organizations in Saudi Arabia. PhD thesis, University of Salford, UK.

Alsakini, W (2012) Two models for managing the virtualisation of construction management firms in the context of Finnish construction markets. PhD thesis, Aalto University, Finland.

Alsalman, A A (2012) Construction risks allocation: Optimal risk allocation decision support model. PhD thesis, Oregon State University, USA.

Alsamadani, R; Hallowell, M and Javernick-Will, A N (2013) Measuring and modelling safety communication in small work crews in the US using social network analysis. Construction Management and Economics, 31(6), pp. 568-579. ISSN 1466433X

Alsamadani, R; Hallowell, M R; Javernick-Will, A and Cabello, J (2013) Relationships among language proficiency, communication patterns, and safety performance in small work crews in the United States. Journal of Construction Engineering and Management, 139(9), pp. 1125-1134. ISSN 0733-9364

Alsamadani, R M (2013) Measuring, modeling, and assessing safety communication in construction crews in the US using social network analysis. PhD thesis, University of Colorado at Boulder, USA.

Alsamarraie, M M and Ghazali, F (2023) Evaluation of organizational procurement performance for public construction projects: Systematic review. International Journal of Construction Management, 23(14), pp. 2499-2508. ISSN 1562-3599

Alsehaimi, A O and Sanni-Anibire, M O (2026) Industry 4.0 technologies: An examination of benefits, challenges and critical success factors for implementation in the Saudi construction industry. Construction Innovation, 26(2), pp. 607-630. ISSN 1471-4175

Alsehaimi, A O; Fazenda, P T and Koskela, L (2014) Improving construction management practice with the last planner system: A case study. Engineering, Construction and Architectural Management, 21(1), pp. 51-64. ISSN 0969-9988

Alsemari, M A A A and Ramegowda, M (2025) BIM-based approach to manage basra oil company projects. Smart and Sustainable Built Environment, 14(6), pp. 1824-1845. ISSN 2046-6099

Alshahrani, S (2017) Development the a dispute resolution framework to improve the efficiency of dispute resolution in Saudi construction projects. PhD thesis, University of Salford, UK.

Alshahrani, S A A D (2017) Development of a dispute resolution framework to improve the efficiency of dispute resolution in Saudi construction projects. PhD thesis, University of Salford, UK.

Alshammari, S A R (2019) Developing a comprehensive construction delay analysis technique. PhD thesis, Brunel University, UK.

Alshamsi, O S (2019) Multiple criteria decision making for supplier selection and cross-cultural considerations: Case study of the United Kingdom / United Arab Emirates construction industry. PhD thesis, University of Exeter, UK.

Alsharef, A F A (2022) Leveraging data analytics to improve construction operations and occupational safety. PhD thesis, North Carolina State University, USA.

Alsharif, M A (2017) Improving sustainability on university campuses in Saudi Arabia: An assessment of organisational and decision-related opportunities and barriers. PhD thesis, University of Reading, UK.

Alshboul, O.; Al-Shboul, K.; Shehadeh, A. and Tatari, O. (2026) Advancing equipment management for construction: Introducing a new model for cost, time and quality optimization. Construction Innovation, 26(4), pp. 1191-1217. ISSN 1471-4175

Alshdiefat, A S (2018) Developing an assessment model for the adoption of building information modelling to reduce the cost of change orders in the Jordanian construction industry. PhD thesis, University of Salford, UK.

Alshdiefat, A S; Sharif, A A; Alharahsheh, A I; Albrka, S I; Olsson, N O E; Younes, M and Bang, S (2025) Construction and demolition waste management in Jordan: A multifaceted perspective. Construction Innovation, 25(2), pp. 290-305. ISSN 1471-4175

Alshebli, A (2016) Improving capabilities and strategic fit in governmental agencies: The case of Abu Dhabi government infrastructure sector. PhD thesis, University of Wolverhampton, UK.

Alshehri, A M (2013) Conflict in architectural projects: diagnosis and avoidance: a study based on Saudi Arabian construction industry. PhD thesis, University of Manchester, UK.

Alshehri, A R (2016) Quality management system for building maintenance. PhD thesis, Heriot-Watt University, UK.

Alsheikh-Salem, Y M-B (2022) The development of a sustainability risk assessment model for construction projects: A case study on the Jordanian construction industry. PhD thesis, University of Salford, UK.

Alsherfawi Aljazaerly, A; Okyere, S A; Mensah, S L; Abunyewah, M; Frimpong, L K and Kita, M (2026) Towards a socially sustainable built environment: A comparative assessment of urban neighbourhoods in Istanbul. Smart and Sustainable Built Environment, 15(1), pp. 343-363. ISSN 2046-6099

Alshibani, A; El Ghazzawi, Y A; Mohammed, A; Ghaithan, A M and Hassanain, M A (2024) A multi-criteria decision-making model for heavy construction equipment replacement in Saudi Arabia. Journal of Financial Management of Property and Construction, 29(3), pp. 485-511. ISSN 1366-4387

Alshihre, F (2018) Development of a framework for client satisfaction in the Saudi construction industry. PhD thesis, University of Wolverhampton, UK.

Alshihre, F; Chinyio, E; Nzekwe-Excel, C and Daniel, E I (2020) Improving clients' satisfaction in construction projects: The case of Saudi Arabia. Built Environment Project and Asset Management, 10(5), pp. 709-723. ISSN 2044-124X

Alshihre, F; Chinyio, E; Nzekwe-Excel, C and Daniel, E I (2023) Pursuing alignment of clients' and contractors' perceptions of client satisfaction in Saudi Arabian projects. Built Environment Project and Asset Management, 13(3), pp. 341-358. ISSN 2044-124X

Alsofyani, S (2021) An analysis of how culture influences the arbitration process used to resolve disputes on construction projects in Saudi Arabia. PhD thesis, University of Plymouth, UK.

Alsohiman, N K (2017) Modelling variation for improving the management of construction engineering project outcomes in the Kingdom of Saudi Arabia. PhD thesis, University of Liverpool, UK.

Alsulami, H; Serbaya, S H; Rizwan, A; Saleem, M; Maleh, Y and Alamgir, Z (2023) Impact of emotional intelligence on the stress and safety of construction workers' in Saudi Arabia. Engineering, Construction and Architectural Management, 30(4), pp. 1365-1378. ISSN 0969-9988

Alsulamy, S (2015) Developing a performance measurement framework for municipal construction projects in Saudi Arabia. PhD thesis, Edinburgh Napier University, UK.

Alsuliman, J A (2014) Effective stakeholder engagement in variation order management at the design stage of public sector construction projects in Saudi Arabia. PhD thesis, Heriot-Watt University, UK.

Alsyouf, L; Al Harbat, R; Ma'bdeh, S N and Mushtaha, E S N (2026) Economic feasibility of low-impact retrofit strategies for enhancing energy efficiency in residential townhouses: A case study of sharjah. Construction Economics and Building, 26(1), ISSN 2204-9029

Altan, E and Işık, Z (2024) Digital twins in lean construction: A neutrosophic AHP – BOCR analysis approach. Engineering, Construction and Architectural Management, 31(12), pp. 5029-5056. ISSN 0969-9988

Altoryman, A (2014) Identification and assessment of risk factors affecting construction projects in the gulf region: Kuwait and Bahrain. PhD thesis, University of Manchester, UK.

Altoryman, A S (2014) Identification and assessment of risk factors affecting construction projects in the Gulf region: Kuwait and Bahrain. PhD thesis, University of Manchester, UK.

Alvanchi, A and JavadiAghdam, S (2019) Job site weather index: an indicator for open environment construction projects. Construction Innovation, 19(1), pp. 110-124. ISSN 1471-4175

Alves, T d C L (2005) Buffering practices in HVAC ductwork supply chains. PhD thesis, University of California, Berkeley, USA.

Alves, T d C L; Milberg, C and Walsh, K D (2012) Exploring lean construction practice, research, and education. Engineering, Construction and Architectural Management, 19(5), pp. 512-525. ISSN 0969-9988

Alves, T d C L; Neuman, Y; Walsh, K D; Needy, K L and AlMaian, R (2020) Highly effective companies in supplier quality surveillance practices: A quantitative analysis. Construction Management and Economics, 38(3), pp. 239-258. ISSN 01446193

Alwisy, A; Bouferguene, A and Al-Hussein, M (2020) Framework for target cost modelling in construction projects. International Journal of Construction Management, 20(2), pp. 89-104. ISSN 1562-3599

Alyileili, M and Opoku, A (2025) Artificial intelligence ethics in municipal and construction sectors: A literature review. Construction Economics and Building, 25(3-4), pp. 210-230. ISSN 2204-9029

Alyousif, A; Naoum, S; Atkinson, A and Robinson, H (2010) National culture influence on management practices in the construction industry of United Arab Emirates. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Alyousif, A T (2010) The influence of national culture on the management practices of construction companies in the United Arab Emirates. PhD thesis, London South Bank University, UK.

Alzahrani, H; Arif, M; Kaushik, A; Goulding, J and Heesom, D (2021) Artificial neural network analysis of teachers' performance against thermal comfort. International Journal of Building Pathology and Adaptation, 39(1), pp. 20-32. ISSN 23984708

Alzahrani, H; Arif, M; Kaushik, A K; Rana, M Q and Aburas, H M (2023) Evaluating the effects of indoor air quality on teacher performance using artificial neural network. Journal of Engineering, Design and Technology, 21(2), pp. 604-618. ISSN 1726-0531

Alzohbi, M G M (2015) A framework for evaluating material management performance in Jordanian concrete building projects. PhD thesis, Sheffield Hallam University, UK.

Alzoubi, Y; Locatelli, G and Sainati, T (2024) Turning a blind eye: Ignoring modern slavery in the race to construction project completion. Journal of Construction Engineering and Management, 150(10): 04024136, ISSN 0733-9364

Alzubi, K M; Alkhateeb, A M and Hiyassat, M A (2023) Factors affecting the job satisfaction of construction engineers: Evidence from Jordan. International Journal of Construction Management, 23(2), pp. 319-328. ISSN 1562-3599

Amade, B; Ogbonna, A C and Nkeleme, E I (2022) An investigation of the factors affecting successful enterprise resource planning (ERP) implementation in Nigeria. Journal of Construction in Developing Countries, 27(1), pp. 41-63. ISSN 1823-6499

Amadi, A (2023) Integration in a mixed-method case study of construction phenomena: From data to theory. Engineering, Construction and Architectural Management, 30(1), pp. 210-237. ISSN 0969-9988

Amadi, A and Adeniyi, O (2025) Living with water: Quantitative assessment of property-level resilience to urban flooding. International Journal of Disaster Resilience in the Built Environment, 16(1), pp. 72-86. ISSN 1759-5908

Amadi, A and Higham, A P (2020) A cost trajectory to environmentally adaptive building construction in wet humid settings. International Journal of Building Pathology and Adaptation, 38(1), pp. 68-88. ISSN 23984708

Amadi, A I (2016) Explaining cost overruns in highway projects: a geo-spatial regression modelling and cognitive mapping of latent pathogens and contextual drivers. PhD thesis, University of Salford, UK.

Amadi, A I (2023) Towards methodological adventure in cost overrun research: Linking process and product. International Journal of Construction Management, 23(3), pp. 528-541. ISSN 1562-3599

Amadi, A I and Higham, A (2017) Latent geotechnical pathogens inducing cost overruns in highway projects. Journal of Financial Management of Property and Construction, 22(3), pp. 269-285. ISSN 1366-4387

Amadi, A I and Higham, A (2018) The trickle-down effect of psycho-social constructs and knowledge deficiencies as organizational barriers to cost performance on highway projects. Journal of Financial Management of Property and Construction, 23(1), pp. 57-72. ISSN 1366-4387

Amaechi, C V; Ullah, S; Deng, X; Beddu, S B; Ja'e, I A; Mohamed, D B and Syamsir, A (2026) Utilising factor analysis on political risks including strategies of managing firm-specific risk factors for multinational construction projects in Pakistan. Engineering, Construction and Architectural Management, 33(1), pp. 1-27. ISSN 0969-9988

Amarah, Burhan (2016) Development of a triple bottom line stakeholder satisfaction model. PhD thesis, Bond University, Australia.

Amarasinghe, I A and Hadiwattege, C (2022) Enablers for facilitating life cycle assessment: Key stakeholder perspectives of Sri Lankan construction industry. Built Environment Project and Asset Management, 12(4), pp. 590-612. ISSN 2044-124X

Amarkhil, Q and Elwakil, E (2022) Construction organization success strategy in post-conflict environment. International Journal of Construction Management, 22(4), pp. 701-710. ISSN 1562-3599

Ambekar, S; Roy, D; Hiray, A; Prakash, A and Patyal, V S (2022) Barriers to adoption of reverse logistics: A case of construction, real estate, infrastructure and project (crip) sectors. Engineering, Construction and Architectural Management, 29(7), pp. 2878-2902. ISSN 0969-9988

Ambituuni, A. (2026) Infrastructure transparency initiative and anticorruption in public infrastructure projects: A principal-agent perspective to the antecedents that enable (or hinder) the effectiveness of transparency. Engineering, Construction and Architectural Management, 33(7), pp. 5934-5957. ISSN 0969-9988

Ameh, H and Lamond, J (2025) Public preference of flood-resilient housing technologies in Nigeria: A case study of Kogi State. International Journal of Disaster Resilience in the Built Environment, 16(1), pp. 87-103. ISSN 1759-5908

Ameh, O J and Daniel, E I (2017) Human resource management in the Nigerian construction firms: Practices and challenges. Journal of Construction Business and Management, 1(2), pp. 47-54. ISSN 2521-0165

Ameyaw, E. E.; Agyekum-Mensah, G.; Kumar, B. and Edwards, D. J. (2026) Understanding barriers to the adoption of blockchain-enabled smart contracts in construction projects: Perspectives of construction practitioners. Smart and Sustainable Built Environment, 15(2), pp. 597-621. ISSN 2046-6099

Ameyaw, E E and Chan, A P C (2015) Risk allocation in public-private partnership water supply projects in Ghana. Construction Management and Economics, 33(3), pp. 187-208. ISSN 01446193

Amida, A; Chang, I and Yearwood, D (2020) Designing a practical lab-based assessment: a case study. Journal of Engineering, Design and Technology, 18(3), pp. 567-581. ISSN 1726-0531

Amies, P; Jin, X and Senaratne, S (2025) Identification of success criteria over life cycle of dam industry projects: A Delphi study. Construction Innovation, 25(3), pp. 689-709. ISSN 1471-4175

Amin, K F and Abanda, F H (2019) Building information modelling plan of work for managing construction projects in Egypt. Journal of Construction in Developing Countries, 24(2), pp. 23-61. ISSN 1823-6499

Amin, S H (2024) Predictive relationship in time and cost between planning and construction phases in capital projects. DBA thesis, Grand Canyon University, USA.

Amini, M; Mahdavinejad, M and Bemanian, M (2019) Future of interactive architecture in developing countries: Challenges and opportunities in case of Tehran. Journal of Construction in Developing Countries, 24(1), pp. 163-184. ISSN 1823-6499

Amini, S; Rezvani, A; Tabassi, M and Malek Sadati, S S (2023) Causes of cost overruns in building construction projects in Asian countries; Iran as a case study. Engineering, Construction and Architectural Management, 30(7), pp. 2739-2766. ISSN 0969-9988

Amini Khafri, Amin (2018) A framework for forecasting project estimate at completion using historical and current performance data. PhD thesis, University of Alberta, Canada.

Aminian, E (2015) A study of inter-firm opportunism in the construction industry. PhD thesis, University of Manchester, UK.

Aminuddin, F A B (2019) The compatibility of dispute resolution mechanisms with national culture in the construction industry: a case study of the Malaysian statutory adjudication regime. PhD thesis, University of Salford, UK.

Amiri, Mojtaba and Saghatforoush, Ehsan (2026) From exploration to prioritization: Advancing BIM-IOT integration for construction health and safety improvement. Journal of Construction Business and Management, 8(S1), pp. 125-139. ISSN 2521-0165

Amiri, O; Rahimi, M; Ayazi, A and Khazaeni, G (2024) Multi-criteria decision-making model for EPC contractor prequalification: A hybrid approach. International Journal of Building Pathology and Adaptation, 42(3), pp. 369-385. ISSN 23984708

Amiri Ara, R; Paardenkooper, K and van Duin, R (2022) A new blockchain system design to improve the supply chain of engineering, procurement and construction (EPC) companies: a case study in the oil and gas sector. Journal of Engineering, Design and Technology, 20(4), pp. 887-913. ISSN 1726-0531

Amjad Mohammadi, A; Safaeipour, H; Chenaghlou, M R; Behnejad, A and Afghani Khoraskani, R (2024) Configuration processing and construction of large-span karbandi vaults: A case of the karbandi vaulting of haj-mohammad-qoli timche in tabriz historic bazaar. Engineering, Construction and Architectural Management, 31(1), pp. 432-468. ISSN 0969-9988

Amoah, C (2023) Quality management framework for government social housing construction in South Africa. International Journal of Building Pathology and Adaptation, 41(6), pp. 217-236. ISSN 23984708

Amoah, C and Bikitsha, L (2022) Emerging contractor's management and planning skills to overcome business risk factors. International Journal of Building Pathology and Adaptation, 40(4), pp. 670-689. ISSN 23984708

Amoah, C; Kajimo-Shakantu, K and Schalkwyk, T (2021) Meeting the expectations of the social housing recipients in South Africa: A myth or reality? International Journal of Building Pathology and Adaptation, 39(2), pp. 218-234. ISSN 23984708

Amoah, C and Pretorius, L (2020) Evaluation of the impact of risk management on project performance in small construction firms in South Africa: The case study of construction systems. Journal of Engineering, Design and Technology, 18(3), pp. 611-634. ISSN 1726-0531

Amoo, O; Lukman, Y and Musa, N (2022) Dispute resolution methods adopted by contractors during COVID-19 in eastern cape South Africa: A case study. Journal of Construction Business and Management, 5(2), pp. 54-67. ISSN 2521-0165

Amos, D; Au-Yong, C P and Musa, Z N (2020) Developing key performance indicators for hospital facilities management services: A developing country perspective. Engineering, Construction and Architectural Management, 27(9), pp. 2715-2735. ISSN 0969-9988

Amponsah, Richard (2011) Improving project management practice in Ghana with focus on agriculture, banking and construction sectors of the Ghanaian economy. PhD thesis, RMIT University, Australia.

Ampratwum, G.; Osei-Kyei, R. and Tam, V. W. Y. (2026) Development of a risk assessment model for adopting public-private partnership in building ghana's critical infrastructure resilience against unexpected events. Smart and Sustainable Built Environment, 15(3), pp. 1200-1224. ISSN 2046-6099

Ampratwum, G; Tam, V W Y and Osei-Kyei, R (2023) Critical analysis of risks factors in using public-private partnership in building critical infrastructure resilience: A systematic review. Construction Innovation, 23(2), pp. 360-382. ISSN 1471-4175

Amuda Yusuf, G and Mohamed, S F (2014) Perceived benefits of adopting standard: based pricing mechanism for mechanical and electrical services installations. Construction Economics and Building, 14(2), pp. 104-119. ISSN 2204-9029

Amudjie, J; Agyekum, K; Adinyira, E; Amos-Abanyie, S and Botchway, E A (2025) Implementing the principles of circular economy in the construction industry: Exploratory and confirmatory factor analyses of strategies. Construction Innovation, 25(3), pp. 761-786. ISSN 1471-4175

Amudjie, J; Agyekum, K; Adinyira, E; Amos-Abanyie, S and Kumah, V M A (2023) Awareness and practice of the principles of circular economy among built environment professionals. Built Environment Project and Asset Management, 13(1), pp. 140-156. ISSN 2044-124X

An, J; Wang, Z; Pan, S; Qin, H; Luo, Q and Yan, D (2024) An integrated resilience and assessment methodology framework for addressing uncertainty in highway operation and maintenance systems. Journal of Construction Engineering and Management, 150(12): 04024174, ISSN 0733-9364

An, Mi Sun (2024) Framework for interactive, individualized feedback design to improve thinking skills in construction education. PhD thesis, Texas A&M University, USA.

Anakor, C A; Harper, C M and Taylor, T R B (2026) Training and job search preferences among male and female craft workers in US construction. Journal of Construction Engineering and Management, 152(3): 04025267, ISSN 0733-9364

Anamege, T E (2019) Capital financing strategies of small-scale contractors in Nigeria. PhD thesis, Walden University, USA.

Anastasopoulos, P (2009) Infrastructure asset management: A case study on pavement rehabilitation. PhD thesis, Purdue University, USA.

Anbar, D R; Chang, T; Ullah, S; Alqershy, M T; Mousa, K and Deng, X (2026) The role of interpersonal distrust as a mediator of the relationship between ethnic minorities and knowledge hiding in international construction projects. Engineering, Construction and Architectural Management, 33(1), pp. 832-855. ISSN 0969-9988

Andary, E G; Abi Shdid, C; Chowdhury, A and Ahmad, I (2020) Integrated project delivery implementation framework for water and wastewater treatment plant projects. Engineering, Construction and Architectural Management, 27(3), pp. 609-633. ISSN 0969-9988

Andersen, L P; Karlsen, I L; Kines, P; Joensson, T and Nielsen, K J (2015) Social identity in the construction industry: Implications for safety perception and behaviour. Construction Management and Economics, 33(8), pp. 640-652. ISSN 01446193

Andersen, M T and Findsen, A L (2019) Exploring the benefits of structured information with the use of virtual design and construction principles in a BIM life-cycle approach. Architectural Engineering and Design Management, 15(2), pp. 83-100. ISSN 1745-2007

Anderson, S d (1989) Potential for construction industry improvement. PhD thesis, University of Texas at Austin, USA.

Andrade, J B (2017) Early stage design methodology to ensure life cycle sustainability of residential buildings. PhD thesis, Universidade do Minho, Portugal.

Andrawus, J; Watson, J and Kishk, M (2007) Maintenance optimisation of wind turbines: Lessons for the built environment. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Andreas, B (2019) A framework for understanding the policy process for construction. PhD thesis, Loughborough University, UK.

Andreas, B; Fernie, S and Dainty, A (2022) Understanding policy and change: Using a political economy analysis framework. Construction Management and Economics, 40(11-12), pp. 865-883. ISSN 01446193

André, J P C G (2014) Determination of the main parameters affecting the performance of bridge falsework systems. PhD thesis, Oxford Brookes University, UK.

Angelidi, A (2007) Delays in construction projects in Greece: Causes, effects and project management tools. PhD thesis, University College London, UK.

Anglade, Y J (1998) Development of methodology for highway agencies to follow in establishing optimum acceptance plans for pavements. PhD thesis, University of Florida, USA.

Aniftos, S C (1996) International standards: United States construction industry competitiveness. PhD thesis, Polytechnic University, USA.

Anikeeff, M A and Sriram, V (2008) Construction management strategy and developer performance. Engineering, Construction and Architectural Management, 15(6), pp. 504-513. ISSN 0969-9988

Anjomshoa, E (2024) Key performance indicators of construction companies in branding products and construction projects for success in a competitive environment in Iran. Engineering, Construction and Architectural Management, 31(5), pp. 2151-2175. ISSN 0969-9988

Ankrah, N A and Langford, D A (2005) Architects and contractors: A comparative study of organizational cultures. Construction Management and Economics, 23(6), pp. 595-607. ISSN 01446193

Ankrah, N A; Proverbs, D and Debrah, Y (2007) A cultural profile of construction project organisations in the UK. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Ankrah, N A; Proverbs, D and Debrah, Y (2009) Factors influencing the culture of a construction project organisation: An empirical investigation. Engineering, Construction and Architectural Management, 16(1), pp. 26-47. ISSN 0969-9988

Annor, John (2025) Building pathways to the future: Leveraging collaborative instruction platforms to address global and regional challenges in construction workforce education. PhD thesis, University of Wyoming, USA.

Annunen, P and Haapasalo, H (2023) Industrial operation model for the construction industry. International Journal of Construction Management, 23(16), pp. 2736-2745. ISSN 1562-3599

Anosike, N M; Enenmoh, C R; Nkeleme, E and Mosaku, T O (2016) Comparative analysis of contributions of building and quantity surveying professions towards the development of sustainable construction industry in Nigeria. African Journal of Built Environment Research, 1(1), pp. 1-14. ISSN 2414-0236

Ansah, S K (2018) An integrated total quality management model for the Ghanaian construction industry. DPhil thesis, University of Johannesburg, South Africa.

Ansari, R (2019) Dynamic simulation model for project change-management policies: Engineering project case. Journal of Construction Engineering and Management, 145(7): 05019008, ISSN 0733-9364

Ansell, M (2009) A study of a collaborative framework arrangement for highways renewals schemes. EngD thesis, Loughborough University, UK.

Ansell, M; Holmes, M; Evans, R; Pasquire, C and Price, A (2009) Delivering best value in highways major maintenance schemes: Case study. Journal of Construction Engineering and Management, 135(4), pp. 235-245. ISSN 0733-9364

Antai, I; Lenka, S and Achtenhagen, L (2025) Digital platforms and the construction supply chain: Trends and emerging themes in extant AEC research. Construction Management and Economics, 43(2), pp. 113-129. ISSN 0144-6193

Anthony Jnr, B (2025) Sustainable mobility governance in smart cities for urban policy development: A scoping review and conceptual model. Smart and Sustainable Built Environment, 14(3), pp. 649-671. ISSN 2046-6099

Anthony Jnr, B (2025) A decentralized prototype framework for peer-to-peer based electric car sharing services towards sustainable road transportation. Smart and Sustainable Built Environment, 14(4), pp. 1172-1193. ISSN 2046-6099

Antino, P (2021) Interpreting the Party Wall etc Act 1996 and the implications for building below ground. PhD thesis, Anglia Ruskin University, UK.

Antoine, A L C (2017) Performance-based project delivery selection for highway design and construction projects. PhD thesis, University of Colorado at Boulder, USA.

Antoniadis, D (2009) Managing complexity in project teams. PhD thesis, Loughborough University, UK.

Antwi Afari, E. N.; Acquah, I. S. K.; Issau, K. and Arko-Folson, G. (2026) Modelling the nexus between sustainable project management and project success: Evidence from Ghana. Journal of Engineering, Design and Technology, 24(5), pp. 1279-1297. ISSN 1726-0531

Anugwo, I C; Appau, M W; Simpeh, F and Attakora-Amaniampong, E (2025) Critical drivers of changes in energy-saving behaviours in student housing in Northern Ghana. Journal of Engineering, Design and Technology, 23(6), pp. 2023-2041. ISSN 1726-0531

Anugwo, I C; Appau, W M; Simpeh, F and Attakora-Amaniampong, E (2024) Exploring the challenges of hydraform blocks as a sustainable building material: The experts' view. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Anumba, C J; Issa, R R A; Pan, J and Mutis, I (2008) Ontology-based information and knowledge management in construction. Construction Innovation, 8(3), pp. 218-239. ISSN 1471-4175

Anuradha, I G N; Perera, B A K S and Ekanayake, B J (2022) Significance of whole life embodied energy and embodied carbon of wall materials compared to their initial/maintenance costs. International Journal of Construction Management, 22(6), pp. 1090-1103. ISSN 1562-3599

Anvuur, A M; Kumaraswamy, M M and Mahesh, G (2011) Building relationally integrated value networks (RIVANS). Engineering, Construction and Architectural Management, 18(1), pp. 102-120. ISSN 0969-9988

Anzagira, L F; Duah, D; Badu, E; Simpeh, E K and Marful, A B (2024) Stimulation strategies to promote green building uptake in developing countries: The case of Ghana. Journal of Engineering, Design and Technology, 22(3), pp. 1012-1029. ISSN 1726-0531

Aoieong, Raymond Taiman (2004) Capturing quality costs of construction processes using the construction process cost model (CPCM). PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Aouad, G F (1991) Integrated planning systems for the construction industry. PhD thesis, Loughborough University, UK.

Aouad, G F; Ford, S R; Kirkham, J A; Child, T; Cooper, G S; Brandon, P S; Brown, F E; Oxman, R E and Young, B (1994) Knowledge elicitation using protocol analysis in a workshop environment. Construction Management and Economics, 12(3), pp. 271-278. ISSN 01446193

Aouad, G F; Kawooya, A A O and Price, A D F (1996) Construction planning models: A review of history, capabilities and limitations. Journal of Construction Procurement, 2(2), pp. 19-37. ISSN 1358-9180

Apinayan, K.; Perera, B. A. K. S.; Weerasooriya, D. and Ranadewa, K. A. T. O. (2026) Adaptability of BIM technology for detailed cost estimation in Sri Lankan construction industry. Journal of Engineering, Design and Technology, 24(3), pp. 633-665. ISSN 1726-0531

Appireddy, K and George, G (2026) Lean tools for enhancing construction project performance: Integration of LPS and LBMS in utility power distribution projects. International Journal of Construction Management, 26(5), pp. 789-804. ISSN 1562-3599

Arab, M Z M (2011) A function-based cost model for early cost advice on new-build schools projects. PhD thesis, Heriot-Watt University, UK.

Arafa, E A B (2015) The impact of knowledge management on project success. PhD thesis, University of Portsmouth, UK.

Arai, K and Morimoto, E (2020) Renovation of the Japanese construction industry: Evaluation of i-Construction from the perspective of construction management. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Arai, K and Morimoto, E (2021) Productivity and innovation in the Japanese construction industry. Construction Innovation, 21(4), pp. 917-933. ISSN 1471-4175

Arai, K and Morimoto, E (2023) Case study in shikoku: Changes in the bidding behaviour of businesses. International Journal of Construction Management, 23(2), pp. 225-233. ISSN 1562-3599

Arambula, E and Gharaibeh, N (2014) Methods for accumulating construction and material quality test results and their effect on acceptance decisions. Journal of Construction Engineering and Management, 140(8): 06014006, ISSN 0733-9364

Aramvareekul, P (2003) An analysis of labor productivity in the United States construction industry. PhD thesis, State University of New York at Buffalo, USA.

Arana, M M and Wittek, R P M (2016) Community resilience: Sustained cooperation and space usage in collective housing. Building Research & Information, 44(7), pp. 764-774. ISSN 0961-3218

Aranda-Mena, G (2003) Mapping workers' cognitive structures of construction site hazards. PhD thesis, University of Reading, UK.

Aranda-Mena, G; Blismas, N and Wakefield, R (2005) Factors affecting the uptake of e-business by small building enterprises. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Aranda-Mena, G; Sher, W; Gameson, R and Ward, P (2005) Evolving trends in nD modelling: The 'construction planning workbench'. Architectural Engineering and Design Management, 1(2), pp. 111-126. ISSN 1745-2007

Arantes, A and Ferreira, L M D F (2020) Underlying causes and mitigation measures of delays in construction projects: An empirical study. Journal of Financial Management of Property and Construction, 25(2), pp. 165-181. ISSN 1366-4387

Arashpour, M; Wakefield, R; Blismas, N and Lee, E W M (2014) Analysis of disruptions caused by construction field rework on productivity in residential projects. Journal of Construction Engineering and Management, 140(2): 04013053, ISSN 0733-9364

Araujo, Adolpho Guido de (2021) Methodology for evaluation of environmental aspects in urban subdivision works in the pre-construction phase. PhD thesis, Universidade Federal de Pernambuco, Brazil.

Araujo, L G; Piña, A B S; Aidar, L A G; Coelho, G O and Carvalho, M T M (2019) Recommendations and guidelines for implementing PPP projects: Case of the electricity sector in Brazil. Built Environment Project and Asset Management, 9(2), pp. 262-276. ISSN 2044-124X

Araujo, Luís Otávio Cocito de (2005) Method to propose directions improving labor productivity in the steel reinforcement activities. PhD thesis, Universidade de São Paulo, Brazil.

Arayamparambil, S. R.; Jha, K. N. and Singh, A. (2026) Development of a quality assessment scoring framework for residential buildings. International Journal of Building Pathology and Adaptation, 44(4), pp. 833-848. ISSN 2398-4708

Arayici, Y; Tokdemir, O B and Kassem, M (2023) A quantitative, evidence-based analysis of correlations between lean construction and building information modelling. Smart and Sustainable Built Environment, 12(5), pp. 975-1001. ISSN 2046-6099

Arbabi, H; Salehi-Taleshi, M J and Ghods, K (2020) The role of project management office in developing knowledge management infrastructure. Engineering, Construction and Architectural Management, 27(10), pp. 3261-3287. ISSN 0969-9988

Arbulu, R J; Tommelein, I D; Walsh, K D and Hershauer, J C (2003) Value stream analysis of a re-engineered construction supply chain. Building Research & Information, 31(2), pp. 161-171. ISSN 0961-3218

Arditi, D; Ayrancioglu, M and Shi, J J (2005) Worker safety issues in night-time highway construction. Engineering, Construction and Architectural Management, 12(5), pp. 487-501. ISSN 0969-9988

Arditi, D; Gluch, P and Holmdahl, M (2013) Managerial competencies of female and male managers in the Swedish construction industry. Construction Management and Economics, 31(9), pp. 979-990. ISSN 1466433X

Arditi, D and Mochtar, K (1996) Productivity improvement in the Indonesian construction industry. Construction Management and Economics, 14(1), pp. 13-24. ISSN 01446193

Arefazar, Y; Nazari, A; Hafezi, M R and Maghool, S A H (2022) Prioritizing agile project management strategies as a change management tool in construction projects. International Journal of Construction Management, 22(4), pp. 678-689. ISSN 1562-3599

Arewa, A O (2014) An empirical analysis of commitment to health and safety and its effect on the profitability of UK Construction SMEs. PhD thesis, University of Bolton, UK.

Arhinful, R; Attabra, F K; Mensah, L and Obeng, H A (2026) The mediating role of talent management in the relationship between project manager competencies and sustainable competitive advantage in the Ghanaian construction industry. Construction Management and Economics, 44(2), pp. 119-142. ISSN 0144-6193

Arico, Manuela (2025) Application of scan-to-BIM approaches to HBIM digitisations in architectural heritage environment for documentation, management and conservation purposes. PhD thesis, Università degli Studi di Palermo, Italy.

Arif, M; Bendi, D; Toma-Sabbagh, T and Sutrisna, M (2012) Construction waste management in India: An exploratory study. Construction Innovation, 12(2), pp. 133-155. ISSN 1471-4175

Arif, M and Egbu, C (2010) Making a case for offsite construction in China. Engineering, Construction and Architectural Management, 17(6), pp. 536-548. ISSN 0969-9988

Ariffin, M H and Torrance, J V (2008) Social group related entry participation motivations for continuing professional development activities among malaysian registered quantity surveyors. Journal of Construction in Developing Countries, 13(2), pp. 1-19. ISSN 1823-6499

Arijeloye, B T (2025) Impact of project risk allocation on PPP housing project delivery in Nigeria: Partial least square structural equation modeling approach. Journal of Engineering, Design and Technology, 23(3), pp. 812-829. ISSN 1726-0531

Arijeloye, B T; Aje, I O and Oke, A E (2024) Evaluating the key risk factors in PPP-procured mass housing projects in Nigeria: A Delphi study of industry experts. Journal of Engineering, Design and Technology, 22(1), pp. 60-76. ISSN 1726-0531

Arnold, Stuart (2008) Transforming systems engineering principles into integrated project team practice. PhD thesis, Cranfield University, UK.

Arora, J; Kar, S and Jha, K N (2023) Assessment of the significance of identified attributes affecting the rebar-fixing productivity using multiple regression. Journal of Construction Engineering and Management, 149(6): 04023039, ISSN 0733-9364

Arora, M; Prakash, A; Mittal, A and Singh, S (2024) Examining the slow acceptance of HR analytics in the Indian engineering and construction industry: A SEM-ann-based approach. Engineering, Construction and Architectural Management, 31(5), pp. 1973-1993. ISSN 0969-9988

Arora, R (1997) Role and influence of emerging social dynamics in decisions on investment opportunities in construction industry. PhD thesis, Indian Institute of Technology Delhi, India.

Arowoiya, V.; Oke, A.; Chan, M. and Adelusi, A. (2026) Benefits of adopting digital twin technology (dtt) in the Nigerian construction industry. International Journal of Construction Management, 26(7), pp. 1134-1148. ISSN 1562-3599

Arowoiya, V A; Oke, A E; Aigbavboa, C O and Aliu, J (2020) An appraisal of the adoption internet of things (IoT) elements for sustainable construction. Journal of Engineering, Design and Technology, 18(5), pp. 1193-1208. ISSN 1726-0531

Arowoiya, V A; Oke, A E; Akanni, P O; Kwofie, T E and Enih, P I (2023) Augmented reality for construction revolution–analysis of critical success factors. International Journal of Construction Management, 23(11), pp. 1867-1874. ISSN 1562-3599

Arowosafe, O; Ceranic, B and Dean, A M (2015) A sustainable infrastructure delivery model: Value added strategy in the Nigerian construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Arowosafe, O I (2018) Contractors’ selection criteria for sustainable infrastructure delivery in Nigeria. PhD thesis, University of Derby, UK.

Arshad, H; Qasim, M; Thaheem, M J and Gabriel, H F (2017) Quantification of material wastage in construction industry of Pakistan: An analytical relationship between building types and waste generation. Journal of Construction in Developing Countries, 22(2), pp. 19-34. ISSN 1823-6499

Arslan, V; Ulubeyli, S and Doǧan, E (2025) Reasons of diversification strategy in construction: A view of senior managers. Journal of Financial Management of Property and Construction, 30(3), pp. 455-476. ISSN 1366-4387

Artis, D A Z (2015) Women as leaders in construction in a Northwestern US city: A multiple-case study of the effectiveness of motivation practices and success strategies. PhD thesis, Capella University, USA.

Aryal, A and Wilkinson, S (2020) The role of social capital in the recovery of cultural built heritage: Evidence from three heritage sites in Nepal. International Journal of Disaster Resilience in the Built Environment, 11(1), pp. 44-57. ISSN 1759-5916

Asaad, A and El-Sayegh, S M (2021) Key criteria for selecting green suppliers for construction projects in the UAE. Journal of Financial Management of Property and Construction, 26(2), pp. 201-218. ISSN 1366-4387

Asad, M M; Hassan, R B; Sherwani, F; Abbas, Z; Shahbaz, M S and Soomro, Q M (2019) Identification of effective safety risk mitigating factors for well control drilling operation: An explanatory research approach. Journal of Engineering, Design and Technology, 17(1), pp. 218-229. ISSN 1726-0531

Asadabadi, M R (2024) Project investment decisions: Comparison of nonmonetary benefits. Journal of Construction Engineering and Management, 150(8): 05024008, ISSN 0733-9364

Asadi, R; Wilkinson, S and Rotimi, J O B (2023) The common causes of rework in construction contracts: A diagnostic approach. Journal of Engineering, Design and Technology, 21(4), pp. 1107-1133. ISSN 1726-0531

Asah-Kissiedu, M (2019) Development of an integrated safety, health and environmental management capability maturity model for Ghanaian construction companies. PhD thesis, University of the West of England, Bristol, UK.

Asah-Kissiedu, M; Manu, P; Booth, C A; Mahamadu, A M and Agyekum, K (2023) Integrated safety, health and environmental management in the construction industry: Key organisational capability attributes. Journal of Engineering, Design and Technology, 21(6), pp. 1975-2007. ISSN 1726-0531

Asan, H S and Ozsoy, A (2018) The importance of user memory in understanding housing quality. International Journal of Building Pathology and Adaptation, 36(4), pp. 427-446. ISSN 23984708

Asante, J; Kissi, E; Acheampong, A and Badu, E (2024) State of market intelligence development within construction companies: Evidence from Ghana. Construction Economics and Building, 24(4-5), pp. 98-113. ISSN 2204-9029

Asare, E; Owusu-Manu, D G; Ayarkwa, J; Martek, I and Edwards, D J (2026) Empirical perspective of working capital management practices among large building construction firms in Ghana. Construction Innovation, 26(3), pp. 768-785. ISSN 1471-4175

Asare, E; Owusu-Manu, D G; Ayarkwa, J; Edwards, D J and Martek, I (2023) Thematic literature review of working capital management in the construction industry: Trends and research opportunities. Construction Innovation, 23(4), pp. 775-791. ISSN 1471-4175

Asgari, S (2016) Modeling construction competitive bidding: An agent-based approach. PhD thesis, Columbia University, USA.

Asgari, S and Noorzai, E (2023) Improving the effectiveness and interaction between building information modeling and life cycle assessment. Architectural Engineering and Design Management, 19(1), pp. 22-38. ISSN 1745-2007

Asgary, A and Azimi, N (2019) Choice of emergency shelter: Valuing key attributes of emergency shelters. International Journal of Disaster Resilience in the Built Environment, 10(2-3), pp. 130-150. ISSN 1759-5916

Ashraf, H; Ali, A; Sunindijo, R Y; Maqsoom, A; Memon, S A and Hassan, M U (2023) Workers' relational identification with supervisors influences safety behaviour in construction projects. Engineering, Construction and Architectural Management, 30(10), pp. 5030-5051. ISSN 0969-9988

Ashrafi, R M (1981) Risk analysis in management planning and project control: probabilistic techniques are applied to the estimation, planning, forecasting and control of large capital projects to ascertain and reduce the degree of inherent risk and uncertainty. PhD thesis, University of Bradford, UK.

Ashton, P and Gidado, K (2001) Risk associated with inadequate site investigation procedures under design and build procurement systems. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Ashton, P and Gidado, K (2002) The identification of uncertainty and risk associated with inadequate site investigation procedures relative to project complexity. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Ashton, P and Gidado, K (2003) The development of a project and site investigation risk evaluation model. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Ashworth, S J (2021) The evolution of facility management (FM) in the building information modelling (BIM) process: An opportunity to use critical success factors (CSF) for optimising built assets. PhD thesis, Liverpool John Moores University, UK.

Asiedu, R. O.; Amoakwa, A. B.; Ameyaw, C.; Owusu-Manu, D. G.; Daniels, P. A. and Gyimah, S. (2026) Environmental, social, and governance considerations in sustainable construction project delivery. Construction Economics and Building, 26(2), ISSN 2204-9029

Asiedu, E M and Mkansi, M (2023) Critical factors contributing to budget overruns in Ghana's telecommunication industry construction projects. Journal of Construction in Developing Countries, 28(2), pp. 265-293. ISSN 1823-6499

Asiedu, R O; Adaku, E and Owusu-Manu, D-G (2017) Beyond the causes: Rethinking mitigating measures to avert cost and time overruns in construction projects. Construction Innovation, 17(3), pp. 363-380. ISSN 1471-4175

Asiedu, R O; Frempong, N K and Alfen, H W (2017) Predicting likelihood of cost overrun in educational projects. Engineering, Construction and Architectural Management, 24(1), pp. 21-39. ISSN 0969-9988

Asiedu, R O; Manu, P; Mahamadu, A M; Booth, C A; Olomolaiye, P; Agyekum, K and Abadi, M (2023) Critical skills for infrastructure procurement: Insights from developing country contexts. Journal of Engineering, Design and Technology, 21(6), pp. 1948-1974. ISSN 1726-0531

Asif, M; Hassanain, M A; Nahiduzzaman, K M and Sawalha, H (2019) Techno-economic assessment of application of solar PV in building sector: A case study from Saudi Arabia. Smart and Sustainable Built Environment, 8(1), pp. 34-52. ISSN 2046-6099

Askarizad, R; Dadashpour, A; Faghirnavaz, J; He, J and Safari, H (2023) Organizing worn-out neighborhoods with the new-urbanism approach using mixed methods in rudsar, Northern Iran. Smart and Sustainable Built Environment, 12(1), pp. 128-155. ISSN 2046-6099

Aslam, A; Rana, I A and Bhatti, S S (2022) Local climate zones and its potential for building urban resilience: A case study of lahore, Pakistan. International Journal of Disaster Resilience in the Built Environment, 13(2), pp. 248-265. ISSN 1759-5916

Aslam, M (2021) Optimizing selection and implementation protocols of lean construction tools and techniques for rapid initial successes. PhD thesis, North Dakota State University, USA.

Aslan, Zaki M (2008) The design of protective structures for the conservation and presentation of archaeological sites. PhD thesis, University College London, UK.

Aslani, F; Amini Hosseini, K and Fallahi, A (2020) A framework for earthquake resilience at neighborhood level. International Journal of Disaster Resilience in the Built Environment, 11(4), pp. 557-575. ISSN 1759-5916

Asli, R A; Wedawatta, G; Hedges, P and Park, K (2016) Building environmental assessment scheme for residential building in Brunei. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Asnaashari, E (2011) A holistic conceptual model for managing construction logistics in building projects: the case of Iran. PhD thesis, Nottingham Trent University, UK.

Asnaashari, E; Doulabi, R Z; Dadkhah, N; Saghafi, N and Ghanbariha, L (2021) Identifying and ranking the occupational stressors and developing a TOPSIS framework for project managers in Iran to cope with occupational stress. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Asnaashari, E; Knight, A; Hurst, A and Farahani, S S (2009) Causes of construction delays in Iran: Project management, logistics, technology and environment. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Assaad, R H; Jezzini, Y and Assaf, G (2026) Proposing and exploring integrated trade delivery as a new project delivery method: Assessing the drivers and barriers to its implementation in construction projects. Journal of Construction Engineering and Management, 152(1): 04025215, ISSN 0733-9364

Assaad, R; El-Adaway, I H and Abotaleb, I S (2020) Predicting project performance in the construction industry. Journal of Construction Engineering and Management, 146(5): 04020030, ISSN 0733-9364

Assaad, R H; El-Adaway, I H; Hastak, M and Lascola Needy, K (2023) Key factors affecting labor productivity in offsite construction projects. Journal of Construction Engineering and Management, 149(1): 04022158, ISSN 0733-9364

Assadi, S O A (1997) An investigation of the records kept by supervisors on construction sites. PhD thesis, University of Newcastle upon Tyne, UK.

Assaf, G and Assaad, R H (2024) Analyzing the critical success factors affecting project bundling performance of infrastructure projects. Journal of Construction Engineering and Management, 150(9): 04024106, ISSN 0733-9364

Assaf, G and Assaad, R H (2024) A data-driven decision-support tool for selecting the optimal project delivery method for bundled projects: Integrating machine learning and expert domain knowledge. Journal of Construction Engineering and Management, 150(12): 04024181, ISSN 0733-9364

Assaf, S; Srour, O and Hassanain, M A (2013) Causes of failure of small contractors in Saudi Arabia. International Journal of Construction Management, 13(4), pp. 1-10. ISSN 1562-3599

Atanasov, V; Greenwood, D and Robson, S (2020) The management of disputes as an element of construction transaction costs: An empirical study. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Atanasov, V; Greenwood, D; Thurairajah, N and Hatcher, C (2021) Forensic delay analysis: An investigation of the reasons for disagreements in time-related disputes. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Atanasov, V; Greenwood, D J; Madebwe, T M and Cox, R (2023) Building time, cost and quality performance of modern methods of construction in a live research project. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Atapattu, A M D S; Hadiwattage, C; Perera, B A K S and Rajaratnam, D (2024) Employing criteria scoring matrix in appraising the economic return of transcending to a circular built environment. Smart and Sustainable Built Environment, 13(2), pp. 267-290. ISSN 2046-6099

Atapattu, C N; Domingo, N and Sutrisna, M (2023) Significant factors affecting the New Zealand transportation infrastructure project cost: quantity surveyors' perception. Built Environment Project and Asset Management, 13(5), pp. 756-777. ISSN 2044-124X

Atapattu, C N; Domingo, N and Sutrisna, M (2024) A conceptual cost estimation model for the pre-design stage of road projects using multiple regression analysis. Journal of Financial Management of Property and Construction, 29(3), pp. 388-404. ISSN 1366-4387

Athamlebbe, R.; Rahman, R. A.; Haron, A. T. and Papadonikolaki, E. (2026) Evaluating competency development strategies to enhance digital leadership in the construction industry: The case of entry-level professionals. Journal of Construction Engineering and Management, 152(9): 04026140, ISSN 0733-9364

Athanasopoulou, E (2008) Delays in construction projects using traditional contract forms: Causes and effects. PhD thesis, University College London, UK.

Athapaththu, K I and Karunasena, G (2018) Framework for sustainable construction practices in Sri Lanka. Built Environment Project and Asset Management, 8(1), pp. 51-63. ISSN 2044-124X

Atin, A (2016) Project risk propagation modeling of engineering, procurement and construction. PhD thesis, Wayne State University, USA.

Atkins, R and Emmanuel, R (2014) Could refurbishment of "traditional" buildings reducecarbon emissions? Built Environment Project and Asset Management, 4(3), pp. 221-237. ISSN 2044-124X

Atkinson, E; Spillane, J; Bradley, J and Brooks, T (2022) Challenges in the adoption of mobile information communication technology (m-ICT) in the construction phase of infrastructure projects in the UK. International Journal of Building Pathology and Adaptation, 40(3), pp. 327-344. ISSN 23984708

Atkinson, R J; Tennakoon, M and Wedawatta, G (2023) Use of new models of construction procurement to enhance collaboration in construction projects: The UK construction industry perspective. Journal of Financial Management of Property and Construction, 28(1), pp. 45-63. ISSN 1366-4387

Atmo, G and Duffield, C (2014) Improving investment sustainability for PPP power projects in emerging economies: Value for money framework. Built Environment Project and Asset Management, 4(4), pp. 335-351. ISSN 2044-124X

Atmodiwirjo, P; Ghaziani, R; Wungpatcharapon, S; Djuwita, R and Yatmo, Y A (2025) Nature-related features and children's well-being in post-disaster school design. International Journal of Disaster Resilience in the Built Environment, 16(1), pp. 143-156. ISSN 1759-5908

Attalla, M M A M (2000) Reconstruction of operating facilities: A model for project management. PhD thesis, University of Waterloo, Canada.

Attar, A; Boudjakdji, M A; Bhuiyan, N; Grine, K; Kenai, S and Aoubed, A (2009) Integrating numerical tools in underground construction process. Engineering, Construction and Architectural Management, 16(4), pp. 376-391. ISSN 0969-9988

Attia, T M (2002) The impact of communication technologies on group problem-solving performance in construction. PhD thesis, North Carolina State University, USA.

Attrill, R and Mickovski, S B (2020) Issues to be addressed with current BIM adoption, prior to the implementation of BIM level 3. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Atuahene, B T and Baiden, B K (2018) Organizational culture of Ghanaian construction firms. International Journal of Construction Management, 18(2), pp. 177-188. ISSN 1562-3599

Atukpa, D J (2021) Managerial support strategies to minimize job insecurity among Nigerian private firms. PhD thesis, Walden University, USA.

Au, Chung Yu Maria (2013) An optimal contract strategy in managing extension of time provisions in building contracts. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Au-Yong, C P; Chua, S J L; Ali, A S and Tucker, M (2019) Optimising maintenance cost by prioritising maintenance of facilities services in residential buildings. Engineering, Construction and Architectural Management, 26(8), pp. 1593-1607. ISSN 0969-9988

Auchterlounie, A C (2004) A new quality theory for UK private housebuilding based on definable quality principles, impression management and the control of cognitive dissonance. PhD thesis, Heriot-Watt University, UK.

Austigard, M S and Mattsson, J (2020) Monitoring climate change related biodeterioration of protected historic buildings. International Journal of Building Pathology and Adaptation, 38(4), pp. 529-538. ISSN 23984708

Avetisyan, H G; Miller-Hooks, E and Melanta, S (2012) Decision models to support greenhouse gas emissions reduction from transportation construction projects. Journal of Construction Engineering and Management, 138(5), pp. 631-641. ISSN 0733-9364

Avila, J; Rapp, R; Dunbar, S and Jackson, A T (2021) Burnout and worklife in disaster restoration: Maslach burnout inventory and areas of worklife survey. Journal of Construction Engineering and Management, 147(2): 04020171, ISSN 0733-9364

Aviram Traubita, A (2009) Structural response and cost characterization of bridge construction using seismic performance enhancement strategies. PhD thesis, University of California, Berkeley, USA.

Avrithi, K. (2026) Resilience of infrastructure for midsized cities against flooding: A case study. International Journal of Disaster Resilience in the Built Environment, pp. 1-16. ISSN 1759-5908

Awad, A M (2005) The interaction between project finance of a large-scale construction project and macroeconomic indicators and policies. PhD thesis, University of Nottingham, UK.

Awagah, Nicholas K (2024) An integrated framework for mentoring artisans in the Ghanaian construction industry. PhD thesis, University of Johannesburg, South Africa.

Awale, R and Rowlinson, S (2015) An exploratory study of a CSV concept for achieving firm competitiveness in Hong Kong construction firms. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Awale, Raman (2016) An exploratory study of a 'creating shared value' (CSV) concept for achieving firm competitiveness in Hong Kong construction firms. PhD thesis, University of Hong Kong, Hong Kong.

Awe, E M (2012) A framework for training and development of construction craft skills in Nigeria. PhD thesis, Sheffield Hallam University, UK.

Awodele, I A; Mewomo, M C and Eze, E C (2023) Inhibitors to the adoption of building information modelling in modular construction: A case study of the Nigerian construction industry. Journal of Construction in Developing Countries, 28(2), pp. 19-36. ISSN 1823-6499

Awodele, O A (2012) Framework for managing risk in privately financed market projects in Nigeria. PhD thesis, Heriot-Watt University, UK.

Awodele, O A; Aghimien, D O; Akinkunmi, O G and Aigbavboa, C O (2019) Labour-only procurement: A veritable surviving strategy for contractors in a challenging economy. Journal of Engineering, Design and Technology, 17(2), pp. 347-361. ISSN 1726-0531

Awuah, E (2020) A conceptual risk management framework for public private partnership in developing countries: A Ghanaian and South African perspective. PhD thesis, University of South Africa, South Africa.

Awuku, B; Asa, E; Baffoe-Twum, E and Essegbey, A (2024) Conceptual cost estimation of highway bid items: a systematic literature review. Engineering, Construction and Architectural Management, 31(3), pp. 1187-1221. ISSN 0969-9988

Awuzie, B and McDermott, P (2016) A systems approach to assessing organisational viability in project-based organisations. Built Environment Project and Asset Management, 6(3), pp. 268-283. ISSN 2044-124X

Awuzie, B; McDermott, P and Farag, F (2018) Achieving social value through construction frameworks: the effect of client attributes. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 171(1), pp. 25-31. ISSN 17514304

Awuzie, B O (2014) A viable infrastructure delivery systems model for achieving socio-economic benefits in the Nigerian oil and gas industry. PhD thesis, University of Salford, UK.

Awuzie, B O and McDermott, P (2016) The role of contracting strategies in social value implementation. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 169(3), pp. 106-114. ISSN 17514304

Awuzie, B O; McWari, Z P; Chigangacha, P S; Aigbavboa, C O; Haupt, T C and Obi, L (2024) Analysing outsourced and insourced public infrastructure projects' performance in a provincial department of public works: A grounded theory approach. Journal of Engineering, Design and Technology, 22(2), pp. 456-479. ISSN 1726-0531

Ayadi, A; Nasraoui, H; Driss, Z; Bouabidi, A and Abid, M S (2018) Unsteady state of a solar chimney power plant accoupled with a turbine: Case study. Journal of Engineering, Design and Technology, 16(2), pp. 244-255. ISSN 1726-0531

Aydın, D and Mıhlayanlar, E (2024) Determination of the significance of project delivery attributes (PDAs) on sustainable projects in Turkey. Journal of Engineering, Design and Technology, 22(5), pp. 1682-1703. ISSN 1726-0531

Aye, S. Y.; Santoso, D. S. and Dodanwala, T. C. (2026) Bridging the gap: How generational work values influence job satisfaction and turnover intention in the construction industry. Journal of Engineering, Design and Technology, 24(4), pp. 920-942. ISSN 1726-0531

Ayed Eid, A (2021) Effect of the transversal-spacing of stirrup-legs on the behavior and strength of shallow concealed RC beams. Journal of Engineering, Design and Technology, 19(4), pp. 932-942. ISSN 1726-0531

Ayegba, C (2018) Duties and required competencies of a management contractor. Journal of Construction Business and Management, 2(1), pp. 1-9. ISSN 2521-0165

Ayinla, K; Cheung, F and Skitmore, M (2022) Process waste analysis for offsite production methods for house construction: A case study of factory wall panel production. Journal of Construction Engineering and Management, 148(1): 05021011, ISSN 0733-9364

Ayinla, K O and Adamu, Z (2018) Bridging the digital divide gap in BIM technology adoption. Engineering, Construction and Architectural Management, 25(10), pp. 1398-1416. ISSN 0969-9988

Ayman Anwar, R (2022) Enhancing the integration of sustainability assessment within dynamic BIM enabled design projects. PhD thesis, Northumbria University, UK.

Ayo-Odifiri, S O (2025) A systematic review of the applicability of nature-based solutions for resilient urban residences in southern Nigeria. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 344-362. ISSN 1759-5908

Ayodeji, F J (2014) Evaluation of site managers' hindrances towards optimal utilisation of construction resources. Journal of Engineering, Design and Technology, 12(3), pp. 348-363.

Ayodele, O A; Chang-Richards, A and González, V (2020) Factors affecting workforce turnover in the construction sector: A systematic review. Journal of Construction Engineering and Management, 146(2), ISSN 0733-9364

Ayodele, O A; Chang-Richards, Y and González, V A (2022) A framework for addressing construction labour turnover in New Zealand. Engineering, Construction and Architectural Management, 29(2), pp. 601-618. ISSN 0969-9988

Ayodele, T O and Kajimo-Shakantu, K (2022) Challenges and drivers to data sharing among stakeholders in the South African construction industry. Journal of Engineering, Design and Technology, 20(6), pp. 1698-1715. ISSN 1726-0531

Ayodele, T O and Olaleye, A (2021) Flexibility decision pathways in the management of uncertainty in property development: Experience from an emerging market. Journal of Financial Management of Property and Construction, 26(3), pp. 408-432. ISSN 1366-4387

Ayodele, T R (2025) Cost of selected smart building elements and its level of implementation in Abuja. Journal of Financial Management of Property and Construction, 30(2), pp. 335-355. ISSN 1366-4387

Ayodele, T T (2022) Cost-effective retrofit packages for low-middle income residential buildings in Nigeria. PhD thesis, De Montfort University, UK.

Azadeh, A; Kalantari, M; Ahmadi, G and Eslami, H (2019) A flexible genetic algorithm-fuzzy regression approach for forecasting: The case of bitumen consumption. Construction Innovation, 19(1), pp. 71-88. ISSN 1471-4175

Azari Najafabadi, R (2013) An evaluation framework for the integrated design process of sustainable high-performance buildings. PhD thesis, University of Washington, USA.

Azcarate Aguerre, J F (2023) Facades-as-a-service: A cross-disciplinary model for the (re)development of circular building envelopes. PhD thesis, Delft University of Technology, Netherlands.

Azeem, S; Naeem, M A; Waheed, A and Thaheem, M J (2017) Examining barriers and measures to promote the adoption of green building practices in Pakistan. Smart and Sustainable Built Environment, 6(3), pp. 86-100. ISSN 2046-6099

Azhar, N (2014) Integrated construction project delivery system in the U.S. Public sector: An information modeling framework. PhD thesis, Florida International University, USA.

Azhar, S and Choudhry, R M (2016) Capacity building in construction health and safety research, education, and practice in Pakistan. Built Environment Project and Asset Management, 6(1), pp. 92-105. ISSN 2044-124X

Azharuddin, M (2019) Integrated carbon emission management for the United Arab Emirates construction industry. PhD thesis, Heriot-Watt University, UK.

Azim, S W (2011) Understanding and managing project complexity. PhD thesis, University of Manchester, UK.

Aziz, N M and Zainon, N (2023) Driving factors for lean-BIM implementation in Malaysia's construction industry: Qualitative interview-based study. Smart and Sustainable Built Environment, 12(4), pp. 872-891. ISSN 2046-6099

Aziz, Z; Alzaabi, E and Syazli Fathi, M (2023) Prioritisation of resilience criteria and performance indicators for road emergencies crisis response: An analytic hierarchy process (AHP) approach. Journal of Financial Management of Property and Construction, 28(2), pp. 178-205. ISSN 1366-4387

Azmat, Y (2020) Influence of human factors on the safety performance in Saudi Arabian construction industry. PhD thesis, University of Salford, UK.

Azmi, A M (2000) The extent of utilization of geographic information systems in California water utilities for task and decision-making support. DPA thesis, University of La Verne, USA.

Azmy, N (2012) The role of team effectiveness in construction project teams and project performance. PhD thesis, Iowa State University, USA.

Baah, B.; Ayarkwa, J.; Osei-Asibey, D.; Oduro, S.; Sunindijo, R. Y.; Afful, A. E.; Takyi, J. and Sosu, J. (2026) Developing resilient hazard recognition skills among construction workers: The role of safety-simulation training methods. Built Environment Project and Asset Management, 16(3), pp. 597-615. ISSN 2044-124X

Baah, B; Acheampong, A; Osei-Asibey, D and Afful, A E (2023) Assessing the role of respectable engagement in improving construction employee's safety perception. Smart and Sustainable Built Environment, 12(5), pp. 937-962. ISSN 2046-6099

Baba, A (2013) Developing a decision support framework for low carbon housing design and delivery in the UK. PhD thesis, University of the West of England, Bristol, UK.

Babahaji Meibodi, A (2015) On-site concrete waste minimisation in Iran. PhD thesis, Kingston University, UK.

Babakhani, J and Veysi, F (2024) Investigation and optimization of forced convective heat transfer around a tall building using experimental results. International Journal of Building Pathology and Adaptation, 42(5), pp. 893-913. ISSN 2398-4708

Babalola, A and Harinarain, N (2024) Policy barriers to sustainable construction practice in the Nigerian construction industry: An exploratory factor analysis. Journal of Engineering, Design and Technology, 22(1), pp. 214-234. ISSN 1726-0531

Babalola, A; Manu, P; Cheung, C; Yunusa-Kaltungo, A; Bartolo, P; Gao, S and Perera, S (2022) Applications of immersive technologies for occupational safety and health management in the construction industry: A systematic review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Babalola, Akinloluwa S (2025) Application of immersive technologies for occupational safety and health management in the construction industry. PhD thesis, University of Manchester, UK.

Babalola, O and Adesanya, D A (2007) An evaluation of the level of accuracy of electrical services cost estimates in Nigeria. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Babatunde, S (2015) Developing public private partnership strategy for infrastructure delivery in Nigeria. PhD thesis, Northumbria University, UK.

Babatunde, S O; Awodele, O A and Adeniyi, O (2018) Opportunities and challenges of foreign direct investment utilisation and its impact on construction sector in developing countries. Journal of Financial Management of Property and Construction, 23(2), pp. 239-256. ISSN 1366-4387

Babatunde, S O and Ekundayo, D (2019) Barriers to the incorporation of BIM into quantity surveying undergraduate curriculum in the Nigerian universities. Journal of Engineering, Design and Technology, 17(3), pp. 629-648. ISSN 1726-0531

Babatunde, S O; Ekundayo, D and Adekunle, A O (2019) Analysis of BIM maturity level among AEC firms in developing countries: A case of Nigeria. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Babatunde, S O; Ekundayo, D; Adekunle, A O and Bello, W (2020) Comparative analysis of drivers to BIM adoption among AEC firms in developing countries: A case of Nigeria. Journal of Engineering, Design and Technology, 18(6), pp. 1425-1447. ISSN 1726-0531

Babatunde, S O; Ekundayo, D; Babalola, O and Jimoh, J A (2018) Analysis of the drivers and benefits of BIM incorporation into quantity surveying profession: Academia and students' perspectives. Journal of Engineering, Design and Technology, 16(5), pp. 750-766. ISSN 1726-0531

Babatunde, S O; Ekundayo, D; Udeaja, C and Abubakar, U O (2022) An investigation into the sustainability practices in PPP infrastructure projects: A case of Nigeria. Smart and Sustainable Built Environment, 11(1), pp. 110-125. ISSN 2046-6099

Babatunde, S O and Perera, S (2017) Cross-sectional comparison of public-private partnerships in transport infrastructure development in Nigeria. Engineering, Construction and Architectural Management, 24(6), pp. 875-900. ISSN 0969-9988

Babatunde, S O; Perera, S; Ekundayo, D and Adeleke, D S (2020) An investigation into BIM uptake among contracting firms: An empirical study in Nigeria. Journal of Financial Management of Property and Construction, 26(1), pp. 23-48. ISSN 1366-4387

Babatunde, S O; Perera, S; Ekundayo, D and Adeleye, T E (2020) An investigation into BIM-based detailed cost estimating and drivers to the adoption of BIM in quantity surveying practices. Journal of Financial Management of Property and Construction, 25(1), pp. 61-81. ISSN 1366-4387

Babatunde, S O; Perera, S and Zhou, L (2016) Methodology for developing capability maturity levels for PPP stakeholder organisations using critical success factors. Construction Innovation, 16(1), pp. 81-110. ISSN 1471-4175

Babatunde, S O; Perera, S; Zhou, L and Udeaja, C (2016) Stakeholder perceptions on critical success factors for public-private partnership projects in Nigeria. Built Environment Project and Asset Management, 6(1), pp. 74-91. ISSN 2044-124X

Babatunde, S O; Udeaja, C and Adekunle, A O (2021) Barriers to BIM implementation and ways forward to improve its adoption in the Nigerian AEC firms. International Journal of Building Pathology and Adaptation, 39(1), pp. 48-71. ISSN 23984708

Babazadeh, N; Teizer, J; Bargstädt, H J and Melzner, J (2025) Predictive simulation of construction site noise emissions from heavy equipment. Smart and Sustainable Built Environment, 14(3), pp. 715-739. ISSN 2046-6099

Baby, S.; Talebi, S.; Lai, J. H. K.; Tien, P. W. and Kagioglou, M. M. (2026) Mitigating cost estimation challenges in bahrain's construction industry: A problem-solving approach. Built Environment Project and Asset Management, 16(3), pp. 542-560. ISSN 2044-124X

Badamasi, A A; Aryal, K R; Makarfi, U U and Dodo, M (2022) Drivers and barriers of virtual reality adoption in UK AEC industry. Engineering, Construction and Architectural Management, 29(3), pp. 1307-1318. ISSN 0969-9988

Badasyan, N (2018) Project feasibility analysis economic model for private investments in the renewable energy sector. Built Environment Project and Asset Management, 8(2), pp. 215-230. ISSN 2044-124X

Badawy, M; El-Sheikh, R and Hamdy, K (2025) Sensitivity analysis of key factors influencing concession period estimation in PPP wastewater treatment projects: A system dynamics approach. Construction Economics and Building, 25(3-4), pp. 65-89. ISSN 2204-9029

Bademosi, F M (2019) Robotics and automation in construction: Assessment of knowledge, skills and abilities necessary for talent cultivation in industry and education. PhD thesis, University of Florida, USA.

Badenfelt, U (2008) The selection of sharing ratios in target cost contracts. Engineering, Construction and Architectural Management, 15(1), pp. 54-65. ISSN 0969-9988

Badi, S. and Oyedokun, T. (2026) Antecedents and consequences of psychological ownership in tokenised real estate markets. Built Environment Project and Asset Management, 8, pp. 1-20. ISSN 2044-124X

Badi, S and Nasaj, M (2024) Cybersecurity effectiveness in UK construction firms: An extended McKinsey 7S model approach. Engineering, Construction and Architectural Management, 31(11), pp. 4482-4515. ISSN 0969-9988

Badi, S; Ochieng, E; Nasaj, M and Papadaki, M (2021) Technological, organisational and environmental determinants of smart contracts adoption: UK construction sector viewpoint. Construction Management and Economics, 39(1), pp. 36-54. ISSN 01446193

Badi, Sulafa M (2012) Sustainable energy innovation (SEI) within private finance initiative (PFI) projects. PhD thesis, University College London, UK.

Badran, S S and Abdallah, A B (2025) Lean vs agile project management in construction: Impacts on project performance outcomes. Engineering, Construction and Architectural Management, 32(5), pp. 2844-2869. ISSN 0969-9988

Badu, E; Edwards, D J and Owusu-Manu, D (2012) Trade credit and supply chain delivery in the Ghanaian construction industry: Analysis of vendor interactions with small to medium enterprises. Journal of Engineering, Design and Technology, 10(3), pp. 360-379. ISSN 1726-0531

Badu, E; Edwards, D J; Owusu-Manu, D and Brown, D M (2012) Barriers to the implementation of innovative financing (IF) of infrastructure. Journal of Financial Management of Property and Construction, 17(3), pp. 253-273. ISSN 1366-4387

Badu, E; Owusu-Manu, D G; Edwards, D J and Holt, G D (2013) Analysis of strategic issues underpinning the innovative financing of infrastructure within developing countries. Journal of Construction Engineering and Management, 139(6), pp. 726-737. ISSN 0733-9364

Bae, Y J (2016) Integrated design tool of building system optimization for building life cycle cost. PhD thesis, Purdue University, USA.

Baggott S R, O D and Georgakis P, K J (2013) Risk and security challenges on further and higher education campuses. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Baghaei, M (2024) Developing a framework and understanding the key influencing factors for the implementation of the internet of things (IoT) in the UK construction sector. PhD thesis, University of Salford, UK.

Baghdadi, A M A (2017) The allocation of risks in the Saudi Arabian domestic and regional aviation construction projects. PhD thesis, Robert Gordon University, UK.

Bahadorestani, A; Karlsen, J T and Motahari Farimani, N (2019) A comprehensive stakeholder-typology model based on salience attributes in construction projects. Journal of Construction Engineering and Management, 145(9): 04019048, ISSN 0733-9364

Bahadur, W; Ali, A and Soomro, M A (2026) Being left out: Influence of workplace ostracism on employee service creativity in facilities management. Journal of Construction Engineering and Management, 152(3): 04025278, ISSN 0733-9364

Baharfar, Y; Mohammadyan, M; Moattar, F; Nassiri, P and Behzadi, M H (2022) Indoor pm2.5 concentrations of pre-schools; determining the effective factors and model for prediction. Smart and Sustainable Built Environment, 11(4), pp. 1042-1059. ISSN 2046-6099

Bahmani, H; Ao, Y; Yang, D; Wang, D; Li, M; Long, Y and Peng, P (2025) Implications for improving evacuation safety in primary school corridors: A video-based analysis on evacuees' speed and density. Engineering, Construction and Architectural Management, 32(12), pp. 8472-8493. ISSN 0969-9988

Bahrami, S (2021) Product information quality: A sustainability challenge in design and construction. PhD thesis, Lund University, Sweden.

Bahrami, S and Zeinali, D (2023) The sustainability challenge of product information quality in the design and construction of facades: Lessons from the grenfell tower fire. Smart and Sustainable Built Environment, 12(3), pp. 488-506. ISSN 2046-6099

Bai, Y (2007) Intelligent painting process planner for robotic bridge painting. Journal of Construction Engineering and Management, 133(4), pp. 335-342. ISSN 0733-9364

Baiden, B K (2006) Framework for the integration of the project delivery team. PhD thesis, Loughborough University, UK.

Bailey, D (2016) A performance evaluation of mainstream timber framed and traditional masonry housing in the UK. PhD thesis, University of Nottingham, UK.

Bailey, K A (1995) The metamorphosis of Battersea, 1800-1914: a building history. PhD thesis, Open University, UK.

Bajjou, M S and Chafi, A (2018) Lean construction implementation in the Moroccan construction industry: Awareness, benefits and barriers. Journal of Engineering, Design and Technology, 16(4), pp. 533-556. ISSN 1726-0531

Bajjou, M S and Chafi, A (2020) Empirical study of schedule delay in Moroccan construction projects. International Journal of Construction Management, 20(7), pp. 783-800. ISSN 1562-3599

Bajjou, M S and Chafi, A (2022) Exploring the critical waste factors affecting construction projects. Engineering, Construction and Architectural Management, 29(6), pp. 2268-2299. ISSN 0969-9988

Bajpai, A and Misra, S C (2023) A framework for continuation of digitalization in construction: A PLS-SEM approach. Engineering, Construction and Architectural Management, 30(10), pp. 4715-4734. ISSN 0969-9988

Bajracharya, A; Ogunlana, S; Tan, H C and Siew, G C (2021) Understanding the performance of construction business: A simulation-based experimental study. Construction Economics and Building, 21(4), pp. 60-88. ISSN 2204-9029

Bakar, F A; Cheung, C M; Kaltungo, A Y; Mohandes, S R and Lou, E (2024) Key organisational attributes for developing a maturity model: Adopting immersive technologies in construction safety training. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Baker, H (2021) A multimethod approach to learning from text-based construction failure data. PhD thesis, University of Edinburgh, UK.

Baker, H; Velikova, M; Smith, S D; Masterton, G and Hewlett, B (2024) Understanding and learning from failure. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(1), pp. 3-14. ISSN 17514304

Baker, M; Ali, M; Hassett, E and Jahan Tumpa, R (2025) Tapping the untapped resource to address construction skills shortages: Perceptions of Australian women career changers and construction women. Journal of Construction Engineering and Management, 151(4): 04025006, ISSN 0733-9364

Baker, M J (1991) The development of vocational education and training in the British construction industry, 1970-1990. PhD thesis, University of Hull, UK.

Baker, S; Ponniah, D and Smith, S (1999) Risk response techniques employed currently for major projects. Construction Management and Economics, 17(2), pp. 205-213. ISSN 01446193

Baker, Scott William (1997) Risk management in major projects. PhD thesis, University of Edinburgh, UK.

Bakhshi Khayani, P (2011) A Bayesian model for controlling cost overrun in a portfolio of construction projects. PhD thesis, Northeastern University, USA.

Bakogiannis, A (2005) Managing stakeholders: A case study in Athens, Greece. PhD thesis, University College London, UK.

Balasubramanian, S (2017) Green supply chain management: an investigation on the construction sector. PhD thesis, Middlesex University, UK.

Balgheeth, Y (2016) Enhancing existing health and safety processes in public sector construction projects within Saudi Arabia using building information modelling approaches. PhD thesis, University of Salford, UK.

Ball Jr., L F (2011) Assessment of the green building education needs of North Carolina real estate appraisers. PhD thesis, Prescott College, USA.

Ballesteros-Pérez, P; del Campo-Hitschfeld, M L; González-Naranjo, M A and González-Cruz, M C (2015) Climate and construction delays: Case study in Chile. Engineering, Construction and Architectural Management, 22(6), pp. 596-621. ISSN 0969-9988

Balogun, O J (2019) Innovation in quantity surveying practice firms: an investigation of innovation response during compressed pre-contract timelines in Nigeria. PhD thesis, University of Salford, UK.

Balogun, T B (2018) Integrating bridge maintenance life cycle assessments into bridge design for improved sustainable decision making. PhD thesis, University of the West of England, Bristol, UK.

Balogun, T B; Awonuga, O O and Abowen-Dake, R (2023) Investigating digital technological competencies amongst black Asian minority ethnic construction students in the UK. Journal of Engineering, Design and Technology, 21(6), pp. 1857-1882. ISSN 1726-0531

Baloi, D (2002) A framework for managing global risk factors affecting construction cost performance. PhD thesis, Loughborough University, UK.

Bambrah, G K (1989) A systematic approach to appraisal/evaluation of civil engineering projects, with special emphasis on technology. PhD thesis, Loughborough University, UK.

Bamgbade, J A; Hosany, M M; Ajibike, W A and Chai, C S (2024) Green supply chain nuances in East Malaysian construction industry. International Journal of Construction Management, 24(5), pp. 477-485. ISSN 1562-3599

Bamgbade, J A; Kamaruddeen, A M; Nawi, M N M; Yusoff, R Z and Bin, R A (2018) Does government support matter? Influence of organizational culture on sustainable construction among Malaysian contractors. International Journal of Construction Management, 18(2), pp. 93-107. ISSN 1562-3599

Bamgbade, J A; Nawi, M N M; Kamaruddeen, A M; Adeleke, A Q and Salimon, M G (2022) Building sustainability in the construction industry through firm capabilities, technology and business innovativeness: Empirical evidence from Malaysia. International Journal of Construction Management, 22(3), pp. 473-488. ISSN 1562-3599

Bamisile, A (1991) A communication system approach to the management of quality in construction. PhD thesis, Open University, UK.

Banawi, A and Bilec, M M (2014) A framework to improve construction processes: Integrating lean, green and six sigma. International Journal of Construction Management, 14(1), pp. 45-55. ISSN 1562-3599

Banawi, A A (2013) Improving construction processes by integrating lean, green, and six-sigma. PhD thesis, University of Pittsburgh, USA.

Bangwal, D and Tiwari, P (2019) Environmental design and awareness impact on organization image. Engineering, Construction and Architectural Management, 26(1), pp. 29-45. ISSN 0969-9988

Banham, G P (2009) Improving knowledge retention and use in construction project team environments: a soft systems methodology approach. PhD thesis, University of Surrey, UK.

Bani Hashemi Chaharom, Seyed Yaser (2014) The choice and effects of governance mechanisms for regulating client-contractor relationships in large construction projects. PhD thesis, University of Sydney, Australia.

Bani Ismail, L (2012) An evaluation of the implementation of total quality management within the construction sector in the United Kingdom and Jordan. PhD thesis, University of Huddersfield, UK.

Bani Ismail, Loiy (2012) An evaluation of the implementation of total quality management (TQM) within the construction sector in the United Kingdom and Jordan. PhD thesis, University of Huddersfield, UK.

Baniassadi, F; Alvanchi, A and Mostafavi, A (2018) A simulation-based framework for concurrent safety and productivity improvement in construction projects. Engineering, Construction and Architectural Management, 25(11), pp. 1501-1515. ISSN 0969-9988

Banks, E R (2021) Women in construction: Exploring gender-diverse recruitment for engaging a full workforce. PhD thesis, Northcentral University, USA.

Bannholzer, Dominic (2020) Leerstellenmanagement in der planung und steuerung des change-managements von bautechnologieunternehmen: Eine generelle explikation, wie die autopoietische fähigkeit von unternehmen durch lücken im veränderungsprozess positiv potenziert werden kann. PhD thesis, Middlesex University, UK.

Banteli, A; Stevenson, V and Patel, H (2020) Embodied energy considerations in a BIM-enabled building design process: An ethnographic case study. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Banwo, O (2016) The development of a procurement decision support system to enhance construction claims management practice. PhD thesis, Coventry University, UK.

Banwo, O O (2022) Development of a framework for building cost information management in Nigeria. PhD thesis, Coventry University, UK.

Bao, F; Chen, C; Chan, A P C; Martek, I and Shrestha, A (2019) Dynamic framework transfer model for public-private partnerships: Lessons from a China water sector case study. Engineering, Construction and Architectural Management, 26(7), pp. 1218-1239. ISSN 0969-9988

Bao, Qi (2003) Effective energy management during a building's life cycle. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Bao, Z; Laovisutthichai, V; Tan, T; Wang, Q and Lu, W (2022) Design for manufacture and assembly (dfma) enablers for offsite interior design and construction. Building Research & Information, 50(3), pp. 325-338. ISSN 0961-3218

Barajei, C; Appiah-Kubi, E; Kheni, N A; Yalley, P P K and Iddrisu, W (2024) Success factors of pre-construction stages of Ghanaian public road construction project life cycle. International Journal of Construction Management, 24(13), pp. 1444-1453. ISSN 1562-3599

Barakat, T A H (2009) A hybrid model of communication and information management in mega construction projects in Dubai using a new critical success factor approach. PhD thesis, Loughborough University, UK.

Barbarosoglu, B V (2018) Early detection of maintainability issues in MEP systems using BIM. PhD thesis, Illinois Institute of Technology, USA.

Barbosa, P S F and Pimentel, P R (2001) A linear programming model for cash flow management in the Brazilian construction industry. Construction Management and Economics, 19(5), pp. 469-479. ISSN 01446193

Barbosa Resende, C (2021) Post-construction evaluation for work zones and construction engineers' training. PhD thesis, Iowa State University, USA.

Barker, R (2006) Waste assessment and application of improvement techniques in UK private housebuilding supply chains. PhD thesis, Cardiff University, UK.

Barker, R; Childerhouse, P; Naim, M; Masat, J and Wilson, D (2004) Potential of total cycle time compression in construction: Focus on program development and design. Journal of Construction Engineering and Management, 130(2), pp. 177-187. ISSN 0733-9364

Barlow, C (2012) The Code for Sustainable Homes: what are the innovation implications for the social housing development sector? PhD thesis, University of Salford, UK.

Barlow, P L (2015) Assessment of subcontractor quality on California hospital construction projects through third-party inspections. PhD thesis, University of Florida, USA.

Barmayehvar, B (2013) Being an effective project manager: an exploration within project-oriented organisations. PhD thesis, University of Manchester, UK.

Baron, N and Cherenet, Z (2018) Perceptions and pathways of resilience in Addis Ababa. International Journal of Building Pathology and Adaptation, 36(4), pp. 337-352. ISSN 23984708

Barontini, A (2021) Bio-inspired algorithms for structural health monitoring of civil engineering systems. PhD thesis, Universidade do Minho, Portugal.

Baroudi, B and McAnulty, S (2013) Management of remote construction projects: The Australian experience. International Journal of Construction Management, 13(2), pp. 1-12. ISSN 1562-3599

Baroudi, B and R. Rapp, R (2014) Stakeholder management in disaster restoration projects. International Journal of Disaster Resilience in the Built Environment, 5(2), pp. 182-193. ISSN 1759-5916

Baroudi, B and Rapp, R (2016) Disaster restoration project management: Leadership education and methods. International Journal of Disaster Resilience in the Built Environment, 7(5), pp. 434-443. ISSN 1759-5916

Barour, S and Zergua, A (2021) Numerical analysis of reinforced concrete beams strengthened in shear using carbon fiber reinforced polymer materials. Journal of Engineering, Design and Technology, 19(2), pp. 339-357. ISSN 1726-0531

Barr, D W J (2004) The department of trade and industry key performance indicators: A critical appraisal. PhD thesis, University of Southampton, UK.

Barraket, J and Loosemore, M (2018) Co-creating social value through cross-sector collaboration between social enterprises and the construction industry. Construction Management and Economics, 36(7), pp. 394-408. ISSN 01446193

Barrett, N (2011) The rise of a profession within a profession: the development of the architectural technology discipline within the profession of architecture. PhD thesis, Robert Gordon University, UK.

Barrett, P and Barrett, L (2006) The 4Cs model of exemplary construction projects. Engineering, Construction and Architectural Management, 13(2), pp. 201-215. ISSN 0969-9988

Barrett, P and Sutrisna, M (2009) Methodological strategies to gain insights into informality and emergence in construction project case studies. Construction Management and Economics, 27(10), pp. 935-948. ISSN 1466433X

Barrie, H; McDougall, K; Miller, K and Faulkner, D (2023) The social value of public spaces in mixed-use high-rise buildings. Buildings & Cities, 4(1), pp. 669-689. ISSN 2632-6655

Barry, S; Cronin, W; Spillane, J P and Bradley, J G (2021) Compliance with COVID-19 regulations in micro-enterprises and SMEs in the Irish construction sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Barry, W; Leite, F and O'Brien, W J (2015) Late deliverable risk catalog: Evaluating the impacts and risks of late deliverables to construction sites. Journal of Construction Engineering and Management, 141(4): 04014087, ISSN 0733-9364

Bartlett, A I (2018) Auto-extinction of engineered timber. PhD thesis, University of Edinburgh, UK.

Bartlett, H V (2006) Understanding the implementation of sustainability principles in UK educational building projects. PhD thesis, University of Cambridge, UK.

Bartley, T; McMahon, C and Denton, S (2016) Information flows in highway project delivery. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Bascoul, A M (2017) Managing project structural complexity by integrating facility management in planning, designing, and execution of high-end facility upgrades. PhD thesis, University of California, Berkeley, USA.

Bashir, A M (2013) A framework for utilising lean construction strategies to promote safety on construction sites. PhD thesis, University of Wolverhampton, UK.

Bashir, Adnan (2022) The role of control modes in the performance of Australian and Pakistani construction projects. PhD thesis, University of Sydney, Australia.

Basri, H (1994) An expert system for preliminary landfill design in developing countries. PhD thesis, University of Leeds, UK.

Bassindale, J (2020) Learning through successful feedback: Digital opportunities for effective feedback in project-based architectural education. International Journal of Construction Education and Research, 16(2), pp. 84-101. ISSN 1557-8771

Bassioni, H A (2004) A framework for measuring business performance in construction contracting organisations. PhD thesis, Loughborough University, UK.

Bassioni, H A; Hassan, T M and Price, A D F (2008) Evaluation and analysis of criteria and sub-criteria of a construction excellence model. Engineering, Construction and Architectural Management, 15(1), pp. 21-41. ISSN 0969-9988

Bassioni, H A; Price, A D F and Hassan, T M (2005) Building a conceptual framework for measuring business performance in construction: An empirical evaluation. Construction Management and Economics, 23(5), pp. 495-507. ISSN 01446193

Bastien, A N (2002) Successful organisational and human practices in the UK construction industry: proposing the CONSTRUCT framework of good practice. PhD thesis, University of Warwick, UK.

Bastos, R. A.; Pierott, R. M. R.; Navarro, L. L. L.; Tam, V. W. Y.; Najjar, M. K. and Haddad, A. N. (2026) Comparative analysis of communication in project management approaches: Waterfall, agile, and hybrid. International Journal of Construction Management, 26(10), pp. 2176-2204. ISSN 1562-3599

Batarseh, Sana (2025) An approach to adjusting design build for the modern construction industry. PhD thesis, Arizona State University, USA.

Bataw, A (2016) On the integration of building information modelling in undergraduate civil engineering programmes in the United Kingdom. PhD thesis, University of Manchester, UK.

Bates, A J (2008) The owner's role in project success. PhD thesis, Polytechnic University, USA.

Bates, W and Dawood, N N (1998) Development of a risk allocation strategy for construction in the process industry: A knowledge approach. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Bates, William (1999) A strategy for the development of a knowledge based system for predicting out-turn costs of heavy engineering works within a multi-national cost consultancy. PhD thesis, Teesside University, UK.

Batie, D L (1996) The incorporation of construction history into architectural history education: The "histcon" interactive computer program. PhD thesis, Texas A&M University, USA.

Baughan, R and Crapper, M (2016) Competence management in the UK heritage railway industry. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Baumann, L (2013) The impact of national culture on project management in the Middle East. PhD thesis, Loughborough University, UK.

Bausman, D C (2002) An empirical investigation of the relationship between strategic planning and performance of large construction firms. PhD thesis, Heriot-Watt University, UK.

Bavafa, M (2015) Enhancing information quality through building information modelling implementation within UK structural engineering organisations. PhD thesis, University of Salford, UK.

Bavunoğlu, Z (2014) Assessment model for communication maturity levels of construction companies. PhD thesis, Izmir Institute of Technology, Turkey.

Baweshkha, Monair Ali (2021) Integrating project management office and organisational change management processes for better implementation and adoption of e-health strategy in Saudi Arabia. PhD thesis, RMIT University, Australia.

Bayandor, S; Kalatehjari, R; Akherati, R and Kasebzadeh, J (2025) Causes, effects and solutions of delay and cost overruns in Iranian deep excavation projects. Built Environment Project and Asset Management, 15(2), pp. 309-336. ISSN 2044-124X

Bayar, M S (2019) BIM-enabled recommendations for digital handover process in the highways sector. PhD thesis, University of Salford, UK.

Bayat, F.; Noorzai, E. and Golabchi, M. (2019) Identifying the most important public–private partnership risks in afghanistan's infrastructure projects. Journal of Financial Management of Property and Construction, 24(3), pp. 309-337. ISSN 1366-4387

Bayat, F; Noorzai, E and Golabchi, M (2019) Identifying the most important public-private partnership risks in Afghanistan's infrastructure projects. Journal of Financial Management of Property and Construction, 24(3), pp. 309-337. ISSN 1366-4387

Bayat, M; Khanzadi, M; Nasirzadeh, F and Chavoshian, A (2020) Financial conflict resolution model in BOT contracts using bargaining game theory. Construction Innovation, 20(1), pp. 18-42. ISSN 1471-4175

Bayhan, H G (2025) Transaction costs in construction project team communications: Language model and network science applications. PhD thesis, Michigan State University, USA.

Bayona, A; Hallowell, M R; Bhandari, S; Moyen, N and Lien, A (2025) Impact of energy-based safety training on quality of prejob safety meetings and control of hazardous energy in construction: Multiple baseline experiment. Journal of Construction Engineering and Management, 151(7): 04025086, ISSN 0733-9364

Bayona Malo, A A (2025) Evidence-based strategies to define, differentiate, and prevent serious injury and fatality exposure in construction. PhD thesis, University of Colorado at Boulder, USA.

Bayraktar, M E and Hastak, M (2009) Bayesian belief network model for decision making in highway maintenance: Case studies. Journal of Construction Engineering and Management, 135(12), pp. 1357-1369. ISSN 0733-9364

Beadle, K; Gibb, A; Austin, S; Fuster, A and Madden, P (2008) Adaptable futures: Sustainable aspects of adaptable buildings. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Beaney, W D (2006) An examination of sectoral mobility in the UK labour force. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Beard, J L (2011) Theoretical framework for determinants of A/E/C firm value, strategy and continuity: An analysis incorporating corporeal, volitional and knowledge assets. PhD thesis, Georgia Institute of Technology, USA.

Beatham, S (2003) Development of an integrated business improvement system for construction. EngD thesis, Loughborough University, UK.

Beauregard, M A (2019) Maintaining performance evidence-based educational facility management through a decision-support tool leveraging prior empirical research. PhD thesis, Arizona State University, USA.

Becerik-Gerber, B; Jazizadeh, F; Li, N and Calis, G (2012) Application areas and data requirements for BIM-enabled facilities management. Journal of Construction Engineering and Management, 138(3), pp. 431-442. ISSN 0733-9364

Becker, T C (2012) Improving the predictability of construction project outcomes through project level indirect construction cost practices. PhD thesis, North Carolina State University, USA.

Becker, T H (2016) The effect of leader communication style on the safety climate in the construction industry. PhD thesis, Capella University, USA.

Beemsterboer, S and Koch, C (2017) A human touch: Examining the roles of middle managers for innovation in contractors. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Beg, M A (1999) An economic based decision support system for project level pavement type selection. PhD thesis, University of Texas at Austin, USA.

Behar, C B (2016) A socio-technical perspective of ventilation practices in UK social housing with whole house ventilation systems: design, everyday life and change. PhD thesis, University College London, UK.

Behnisch, M and Ultsch, A (2009) Urban data-mining: Spatiotemporal exploration of multidimensional data. Building Research & Information, 37(5-6), pp. 520-532. ISSN 0961-3218

Beitelmal, W; Molenaar, K R; Javernick-Will, A and Pellicer, E (2017) Challenges and barriers to establishing infrastructure asset management: A comparative study between Libya and the USA. Engineering, Construction and Architectural Management, 24(6), pp. 1184-1202. ISSN 0969-9988

Beitelmal, W H (2016) Towards an infrastructure asset management organizational model for developing countries. PhD thesis, University of Colorado at Boulder, USA.

Bekele, A A and Mahesh, G (2024) Exploring the impact of endogenic factors on the competency of small and medium contractors in the Ethiopian construction industry. Journal of Construction in Developing Countries, 29(1), pp. 211-245. ISSN 1823-6499

Bekele, A A and Mahesh, G (2025) Impact of contractor development programs on the competency of small and medium contractors in Ethiopia. International Journal of Construction Education and Research, 21(1), pp. 94-116. ISSN 1557-8771

Bekele, A A; Mahesh, G and Ingle, P V (2025) Enhancing SMCs' competitiveness through improving material supply chain management practice. International Journal of Construction Management, 25(1), pp. 77-88. ISSN 1562-3599

Belayutham, S; Che Ibrahim, C K I; Zulkifli, A R and Ibrahim, N (2019) A dual-functional social innovation process model for low-cost houses through university-enabled initiative. Construction Innovation, 19(2), pp. 126-148. ISSN 1471-4175

Belayutham, S and Ibrahim, C K I C (2019) Barriers and strategies for better safety practices: The case of construction SMEs in Malaysia. Construction Economics and Building, 19(1), pp. 20-39. ISSN 2204-9029

Belayutham, S; Zabidin, N S and Ibrahim, C K I C (2018) Dynamic representation of barriers for adopting building information modelling in Malaysian tertiary education. Construction Economics and Building, 18(4), pp. 24-44. ISSN 2204-9029

Bell, T (2018) A detailed investigation into the engineering properties and challenges affecting the potential introduction of a UK grown dowel-laminated timber floor panel into the domestic construction market. PhD thesis, University of Strathclyde, UK.

Bello, A O; Isa, R B; Oke, A E; Arogundade, S and Lewis, J M O (2026) Circular economy implementation in the construction industry: An examination of the barriers in a developing country. International Journal of Building Pathology and Adaptation, 44(1), pp. 143-162. ISSN 2398-4708

Bello, A O; Okanlawon, T T; Gbenga, P O; Abdulraheem, A A and Olagoke, O T (2026) Critical success factors (csfs) for the implementation of distributed ledger technology (dlt) in the Nigerian construction industry. Construction Innovation, 26(2), pp. 531-550. ISSN 1471-4175

Bello, A O; Abdulraheem, A A; Afolabi, O P; Aka, A and Gbenga, P O (2024) Assessing the underlying factors affecting trust and transparency in the construction industry: A mixed method approach. Construction Economics and Building, 24(1-2), pp. 3-28. ISSN 2204-9029

Bello, W (2018) Project performance diagnostics: A model for assessing construction project performance in Nigeria. PhD thesis, University of Salford, UK.

Bello, W A (2017) Project performance diagnostics: a model for assessing construction project performance in Nigeria. PhD thesis, University of Salford, UK.

Beltrão, L M P and Carvalho, M T M (2019) Prioritizing construction risks using fuzzy AHP in Brazilian public enterprises. Journal of Construction Engineering and Management, 145(2): 05018018, ISSN 0733-9364

Bender, W J (2000) A risk-based cost control methodology for constructing complex structures with the mobile offshore base as a case study. PhD thesis, University of Maryland, College Park, USA.

Bendi, D (2017) Developing an offsite readiness framework for Indian construction organisations. PhD thesis, University of Salford, UK.

Bendi, D; Rana, M Q; Arif, M; Goulding, J S and Sawhney, A (2021) An off-site construction readiness maturity model for the Indian construction sector. Construction Innovation, 21(1), pp. 123-142. ISSN 1471-4175

Benhaim, M (1997) Interfirm relationships within the construction industry: Towards the emergence of networks? A comparative study between France and the UK. PhD thesis, Brunel University, UK.

Benhaim, M and Birchall, D W (1998) Interfirm relationships within the construction industry: A comparative study between France and the UK. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Benmansour, C and Hogg, K (2002) An investigation into the barriers to innovation and their relevance within the construction sector. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Bennett, L and Gibbeson, C (2010) Perceptions of occupiers' liability risk by estate managers: A case study of memorial safety in English cemeteries. International Journal of Law in the Built Environment, 2(1), pp. 76-93. ISSN 1756-1450

Bensalah, M; Elouadi, A and Mharzi, H (2019) Overview: The opportunity of BIM in railway. Smart and Sustainable Built Environment, 8(2), pp. 103-116. ISSN 2046-6099

Bentil, K K (1990) A model approach for predicting commercial construction site accidents. PhD thesis, University of Florida, USA.

Berghauser Pont, M; Haupt, P; Berg, P; Alstäde, V and Heyman, A (2021) Systematic review and comparison of densification effects and planning motivations. Buildings & Cities, 2(1), pp. 378-401. ISSN 2632-6655

Bertz, M D (1998) Situated learning methodologies and assessment in civil engineering structures education. PhD thesis, Georgia Institute of Technology, USA.

Besaiso, H; Fenn, P and Emsley, M (2016) Alternative dispute resolution in Palestine: The myth and dilemma of construction mediation. International Journal of Law in the Built Environment, 8(3), pp. 269-286. ISSN 1756-1450

Besaiso, H; Fenn, P; Emsley, M and Wright, D (2018) A comparison of the suitability of FIDIC and NEC conditions of contract in Palestine: A perspective from the industry. Engineering, Construction and Architectural Management, 25(2), pp. 241-256. ISSN 0969-9988

Besklubova, S; Skibniewski, M J and Zhang, X (2021) Factors affecting 3D printing technology adaptation in construction. Journal of Construction Engineering and Management, 147(5): 2034, ISSN 0733-9364

Besklubova, S; Zhong, R Y and Tan, B Q (2025) An integrated model of a prefabrication hub feasibility assessment: A Hong Kong case. International Journal of Construction Management, 25(11), pp. 1300-1312. ISSN 1562-3599

Bettemir, Ö H and Birgonul, M T (2025) Solution of discrete time–cost trade-off problem with adaptive search domain. Engineering, Construction and Architectural Management, 32(2), pp. 1032-1052. ISSN 0969-9988

Bevan, W (2016) An investigation of the required skills for the delivery of low and zero carbon buildings within a region. PhD thesis, University of Reading, UK.

Bevan, W; Lu, S L and Sexton, M (2020) Skills required to deliver energy efficient school retrofit buildings. Engineering, Construction and Architectural Management, 27(10), pp. 3051-3073. ISSN 0969-9988

Bew, M D (2017) Engineering better social outcomes through requirements management & integrated asset data processing. PhD thesis, University of Salford, UK.

Beyh, S (2004) Computer and communication engineering: internet protocol telephony in construction. PhD thesis, University of Salford, UK.

Bhagwat, K and Venkata Santosh Kumar, D (2022) A systematic review of construction safety research: Quantitative and qualitative content analysis approach. Built Environment Project and Asset Management, 12(2), pp. 243-261. ISSN 2044-124X

Bhandari, S; Hallowell, M R; Boven, L V; Welker, K M; Golparvar-Fard, M and Gruber, J (2020) Using augmented virtuality to examine how emotions influence construction-hazard identification, risk assessment, and safety decisions. Journal of Construction Engineering and Management, 146(2): 04019102, ISSN 0733-9364

Bhandiwad, M S; Dodamani, B M and M.D, D (2025) Effect of the drag coefficient on the performance of vertical porous baffles in a sloshing tank. Journal of Engineering, Design and Technology, 23(3), pp. 744-765. ISSN 1726-0531

Bhardwaj, S.; Francis, A. and Soman, R. P. (2026) Scenario-based energy and environmental assessment for climate-responsive and low-carbon building design. Smart and Sustainable Built Environment, pp. 1-22. ISSN 2046-6099

Bhargava, A (2009) A probabilistic evaluation of highway project costs. PhD thesis, Purdue University, USA.

Bhat, V S; Indiran, T; Selvanathan, S P and Bhat, S (2025) Designing multivariable pi controller with multi-response optimization for a pilot plant binary distillation column: A robust design approach. Journal of Engineering, Design and Technology, 23(1), pp. 207-227. ISSN 1726-0531

Bhatnagar, S; Jacob, G; Devkar, G; Rybkowski, Z K; Arefazar, Y and Obulam, R (2023) A systematic review of lean simulation games in the construction industry. Architectural Engineering and Design Management, 19(6), pp. 701-719. ISSN 1745-2007

Bhatta, A K and Shan, Y (2026) Exploring cascading failure dynamics in multi-infrastructure systems: Integrating network modeling and thematic insights. Journal of Construction Engineering and Management, 152(5): 04026037, ISSN 0733-9364

Bhattacharjee, K; Bugalia, N and Mahalingam, A (2025) Differences in pathways to resilient safety culture for construction projects of different sizes. Journal of Construction Engineering and Management, 151(5): 04025026, ISSN 0733-9364

Bhattacharya, S (2011) Enablers of growth for construction companies in India: a strategic approach. PhD thesis, Indian Institute of Technology Delhi, India.

Bhattacharya, S and Momaya, K S (2021) Actionable strategy framework for digital transformation in AECO industry. Engineering, Construction and Architectural Management, 28(5), pp. 1397-1422. ISSN 0969-9988

Bhattacharya, S; Momaya, K S and Iyer, K C (2021) Bridging the gaps for business growth among Indian construction companies. Built Environment Project and Asset Management, 11(2), pp. 231-250. ISSN 2044-124X

Bhattacharya-Mis, N; Lamond, J; Montz, B; Kreibich, H; Wilkinson, S; Chan, F and Proverbs, D (2018) Flood risk to commercial property: Training and education needs of built environment professionals. International Journal of Disaster Resilience in the Built Environment, 9(4-5), pp. 385-401. ISSN 1759-5916

Bhaurkar, V P and Thakur, A G (2019) Investigation of crack in beams using anti-resonance technique and FEA approach. Journal of Engineering, Design and Technology, 17(6), pp. 1266-1284. ISSN 1726-0531

Bhawani, S (2021) A function-based lean construction methods ontology supporting the lean implementation planning process developed for construction projects. PhD thesis, Pennsylvania State University, USA.

Bhutto, K H (2004) The application of integrated management systems by contracting organisations. PhD thesis, Sheffield Hallam University, UK.

Bhutto, Khalid Hussain (2004) The application of integrated management systems (IMS) by contracting organisations. PhD thesis, Sheffield Hallam University, UK.

Bi, L; Ren, B; Zhong, D and Hu, L (2015) Real-time construction schedule analysis of long-distance diversion tunnels based on lithological predictions using a markov process. Journal of Construction Engineering and Management, 141(2): 04014076, ISSN 0733-9364

Bibby, L; Austin, S and Bouchlaghem, D (2006) The impact of a design management training initiative on project performance. Engineering, Construction and Architectural Management, 13(1), pp. 7-26. ISSN 0969-9988

Bichard, E (2009) The application of sustainable behaviour change strategies in three built environment companies. Journal of Engineering, Design and Technology, 7(1), pp. 7-20. ISSN 1726-0531

Bichard, E and Thurairajah, N (2013) Behaviour change strategies for energy efficiency in owner-occupied housing. Construction Innovation, 13(2), pp. 165-185. ISSN 1471-4175

Bichard, E and Thurairajah, N (2014) Trialling behaviour change strategies to motivate interest in property level flood protection. International Journal of Disaster Resilience in the Built Environment, 5(2), pp. 130-143. ISSN 1759-5916

Bidhendi, A.; Poshdar, M.; Babaeian Jelodar, M.; Rahimian, F. and González, V. A. (2026) Human-centric integrated change management framework for digital transformation in construction. Engineering, Construction and Architectural Management, 33(3), pp. 2048-2070. ISSN 0969-9988

Bienvenido-Huertas, D; Vargas, E S; Esquivias, P M; de la Hoz Torres, M L; Aguilar, A J; Álvarez, J M D and Aires, M D M (2025) Study on the perception of architecture and building engineering students about the usefulness of quiz games. International Journal of Construction Education and Research, 21(2), pp. 189-212. ISSN 1557-8771

Bigelow, B F (2012) Perceived positive and negative effects of participation in student construction management competitions: A qualitative priority mixed methods study. PhD thesis, Colorado State University, USA.

Bigelow, B F; Bilbo, D and Baker, M (2016) Construction management research: A comparison of perceived value by general contractors, prevalence of publication, and funding. International Journal of Construction Education and Research, 12(3), pp. 224-240. ISSN 1557-8771

Bigelow, B F; Bilbo, D; Ritter, L; Mathew, M and Elliott, J W (2016) An evaluation of factors for retaining female students in construction management programs. International Journal of Construction Education and Research, 12(1), pp. 18-36. ISSN 1557-8771

Bigelow, B F; Glick, S and Aragon, A (2013) Participation in construction management student competitions: Perceived positive and negative effects. International Journal of Construction Education and Research, 9(4), pp. 272-287. ISSN 1557-8771

Biggins, D (2018) An exploratory investigation into how project management methods are chosen and implemented by organisations in the UK. PhD thesis, University of Manchester, UK.

Bigolin, M; Bussular, C Z and Silva Filho, L C P (2021) Evolutionary resilience in the housing sector: Requirements proposal. International Journal of Disaster Resilience in the Built Environment, 12(1), pp. 1-12. ISSN 1759-5916

Bijivemula, S K R; Sai, S J and Chepuri, A (2024) A structural equation model of stakeholder roles in the implementation of green construction strategies in the Indian construction industry. International Journal of Construction Management, 24(5), pp. 486-494. ISSN 1562-3599

Bikitsha, L and Amoah, C (2022) Assessment of challenges and risk factors influencing the operation of emerging contractors in the Gauteng province, South Africa. International Journal of Construction Management, 22(11), pp. 2027-2036. ISSN 1562-3599

Bilbo, D; Bigelow, B F; Rybkowski, Z and Kamranzadeh, A (2014) Effects of family-related factors on female project managers' salaries in the construction industry in the United States. International Journal of Construction Education and Research, 10(4), pp. 255-267. ISSN 1557-8771

Bildsten, L (2016) Purchasing in construction companies. PhD thesis, Lund University, Sweden.

Bildsten, L; Rehme, J and Brege, S (2010) Applying the Kraljic model to the construction sector: The case of a prefab housing factory. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Bilge, E Ç and Yaman, H (2022) Research trends analysis using text mining in construction management: 2000–2020. Engineering, Construction and Architectural Management, 29(8), pp. 3210-3233. ISSN 0969-9988

Biltonen, E F (2001) Cost-benefit analysis of a flood protection project incorporating poverty alleviation concerns: Case study Vietnam. PhD thesis, Colorado State University, USA.

Bin Abd Karim, S B (2015) The development of an empirical-based framework for project risk management. PhD thesis, University of Manchester, UK.

Bin Asad, S.; Purushothaman, M. B. and Poshdar, M. (2026) Interactions of factors affecting the implementation of integrated project delivery in the New Zealand construction industry: A system dynamics and network analysis approach. Construction Management and Economics, 44(6), pp. 453-479. ISSN 0144-6193

Bingol, B N and Polat, G (2020) Framework for evaluating quality performances of subcontractors: Case of Turkish contractors. Journal of Construction in Developing Countries, 25(1), pp. 163-179. ISSN 1823-6499

Biscaya, S V N (2012) Coordination and management of information for construction design projects: a framework for Portugal. PhD thesis, University of Salford, UK.

Bishop, J (2009) Managing technical knowledge to enhance organisational best practice. PhD thesis, Loughborough University, UK.

Bismark, D; Melagoda, D G and Rowlinson, S (2024) Innovation ambidexterity in construction firms: External knowledge antecedents and performance consequences. Construction Management and Economics, 42(6), pp. 503-526. ISSN 01446193

Bittner, Ksenia (2020) Building information extraction and refinement from vhr satellite imagery using deep learning techniques. PhD thesis, Osnabrück University, Germany.

Blackburn, S K (2001) Understanding project managers at work. PhD thesis, University of Reading, UK.

Blackwood, D J (1998) Rationalisation of design cost estimation in the construction industry. PhD thesis, Abertay University, UK.

Blackwood, D J; Sarkar, S and Price, A D F (1997) A research methodology for modelling construction design service costs. Journal of Construction Procurement, 3(3), pp. 47-67. ISSN 1358-9180

Blamah, N V; Magidimisha-Chipungu, H; Dayomi, M and Popoola, A A (2023) Intrinsic mode choice determinants based on a descriptive analysis of the perceptions of Abuja commuters: Towards refocusing the societal mind-set on environmentally sustainable modes choice. Smart and Sustainable Built Environment, 12(1), pp. 1-26. ISSN 2046-6099

Blampied, N B (2018) Parametric functions for conceptual and feasibility estimating in public highway project portfolios. PhD thesis, University of California, Berkeley, USA.

Blay, K. B.; Yevu, S. K.; Ayinla, K. O.; Mahama, A.; Hwang, S. and Rafferty, K. (2026) Exploring digital's role in retaining women in construction. Construction Economics and Building, 26(2), ISSN 2204-9029

Blay, K B; Tuuli, M M and France-Mensah, J (2019) Managing change in BIM-level 2 projects: Benefits, challenges, and opportunities. Built Environment Project and Asset Management, 9(5), pp. 581-596. ISSN 2044-124X

Blismas, N; Sher, W; Thorpe, A and Baldwin, A (2004) A typology for clients' multi-project environments. Construction Management and Economics, 22(4), pp. 357-371. ISSN 01446193

Blismas, N G (2001) Multi project environments of construction clients. PhD thesis, Loughborough University, UK.

Blismas, N G; Sher, W D; Thorpe, A and Baldwin, A N (2004) Factors influencing project delivery within construction clients' multi-project environments. Engineering, Construction and Architectural Management, 11(2), pp. 113-125. ISSN 0969-9988

Boadi, R (2020) A best practice framework for public-private partnerships (PPPs) in road projects: the case of Ghana. PhD thesis, University of Salford, UK.

Boadu, E. F.; Wang, C. C. and Sunindijo, R. Y. (2021) Challenges for occupational health and safety enforcement in the construction industry in Ghana. Construction Economics and Building, 21(1), pp. 1-21. ISSN 2204-9029

Boadu, E F; Sunindijo, R Y; Wang, C C and Frimpong, S (2023) Factors constraining the promotion of health and safety in public works procurement in developing countries. International Journal of Construction Management, 23(9), pp. 1611-1621. ISSN 1562-3599

Boadu, E F; Sunindijo, R Y; Wang, C C and Frimpong, S Y (2022) Health and safety integration into the procurement stages of public construction projects in developing countries: A case of Ghana. Construction Economics and Building, 22(3), pp. 43-64. ISSN 2204-9029

Boadu, Elijah Frimpong (2022) A framework for promoting health and safety through procurement in the construction industry in developing countries: A case of Ghana. PhD thesis, University of New South Wales, Australia.

Boakye Danquah, C; Acheampong, A and Adjei-Kumi, T (2022) Level of awareness of formwork design in the Ghanaian construction industry; enabling future technology application. Journal of Engineering, Design and Technology, 20(4), pp. 1015-1039. ISSN 1726-0531

Boamah, F A; Zhang, J; Shehzad, M U; Sherani, S and Wen, D (2024) Exploring the impact of social capitals and knowledge creation on construction firms performance in the COVID-19 era. Journal of Engineering, Design and Technology, 22(2), pp. 404-421. ISSN 1726-0531

Boateng, A; Ameyaw, C and Mensah, S (2022) Assessment of systematic risk management practices on building construction projects in Ghana. International Journal of Construction Management, 22(16), pp. 3128-3136. ISSN 1562-3599

Boateng, E B (2021) The role of human safety interventions on co-workers’ safety outcomes in construction projects. PhD thesis, University of Newcastle, Australia.

Boateng, P (2014) A dynamic systems approach to risk assessment in megaprojects. PhD thesis, Heriot-Watt University, UK.

Boateng, P; Ahiaga-Dagbui, D; Chen, Z and Ogunlana, S (2015) Modelling economic risks in megaproject construction: A systemic approach. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Boateng, P; Omotayo, T; Osunsanmi, T and Ekundayo, D (2025) Socio-ecological risks management dynamic simulation in megaproject development of the edinburgh tram network. International Journal of Building Pathology and Adaptation, 43(1), pp. 75-92. ISSN 2398-4708

Bobick, T G (2004) Falls through roof and floor openings and surfaces, including skylights: 1992-2000. Journal of Construction Engineering and Management, 130(6), pp. 895-907. ISSN 0733-9364

Boby, P. R.; Mwanza, F. and Samuel, E. B. (2025) Use of building information modelling to reduce the carbon emissions of housing in Zambia. Architectural Engineering and Design Management, 21(5), pp. 1057-1072. ISSN 1745-2007

Bodiford, A D (2007) The impact of gender diversity in the culture of the construction industry. PhD thesis, Nova Southeastern University, USA.

Boeing Singh, L and Kalidindi, S N (2009) Criteria influencing debt financing of Indian PPP road projects: A case study. Journal of Financial Management of Property and Construction, 14(1), pp. 34-60. ISSN 1366-4387

Boes, H and Dorée, A (2011) The development of public procurement at local level in the Netherlands: A longitudinal study. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Boice, J R (1970) A history and evaluation of the school construction systems development project, 1961-1967. EdD thesis, Stanford University, USA.

Boissonneault, A and Peters, T (2023) Concepts of performance in post-occupancy evaluation post-probe: A literature review. Building Research & Information, 51(4), pp. 369-391. ISSN 0961-3218

Boissonneault, A and Peters, T (2024) An exploration of post-occupancy evaluation in Canada: Origins, milestones and next steps. Building Research & Information, 52(3), pp. 332-357. ISSN 0961-3218

Boissonneault, A and Peters, T (2025) The POE paradigm in architecture: Practices and perspectives of Canadian practitioners. Building Research & Information, 53(5), pp. 565-581. ISSN 0961-3218

Boje, C P (2018) Knowledge representation, storage and retrieval for BIM supported building evacuation design. PhD thesis, Cardiff University, UK.

Bolchover, J and Mundle, K (2026) Post-disaster reconstruction: Infill housing prototypes for kathmandu. Buildings & Cities, 7(1), pp. 273-292. ISSN 2632-6655

Bonanomi, M M; Hall, D M; Staub-French, S; Tucker, A and Talamo, C M L (2020) The impact of digital transformation on formal and informal organizational structures of large architecture and engineering firms. Engineering, Construction and Architectural Management, 27(4), pp. 872-892. ISSN 0969-9988

Bong, S; Rameezdeen, R; Zuo, J; Li, R Y M and Ye, G (2015) The designer's role in workplace health and safety in the construction industry: Post-harmonized regulations in South Australia. International Journal of Construction Management, 15(4), pp. 276-287. ISSN 1562-3599

Bonuke, D O (2021) Strategies to improve survival rate among small businesses in the construction industry. PhD thesis, Walden University, USA.

Bonwetsch, T (2015) Robotically assembled brickwork: Manipulating assembly processes of discrete elements. DSc thesis, ETH Zürich, Switzerland.

Bonyad, R; Hamzenejad, M and Khanmohammadi, M (2020) Ranking the regenerative architecture indicators for assessment of research-educational building projects in Tehran, Iran. Smart and Sustainable Built Environment, 9(1), pp. 27-37. ISSN 2046-6099

Boonyanan, A; Robinson, H; Fong, D and Naoum, S (2008) Relationship and knowledge management among construction development project members in Thailand: The clients' perspective. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Boothman, C and Craig, N (2016) Five star status in the UK house building sector: A realistic indication of customer satisfaction or pure fantasy. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Boothman C, H A (2013) Attaining zero defects within the UK's building schools for the future programme: Stakeholders' perceptions. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Borg, J. and Scott-Young, C. M. (2022) Supporting early career project managers in construction: A multi-vocal study. Engineering, Construction and Architectural Management, 29(10), pp. 3830-3846. ISSN 0969-9988

Borg, J (2020) Work readiness of project management graduates in construction: a multi-method multi-vocal qualitative study. PhD thesis, RMIT University, Australia.

Borg, N; Scott-Young, C M; Naderpajouh, N and Borg, J (2023) Surviving adversity: Personal and career resilience in the AEC industry during the COVID-19 pandemic. Construction Management and Economics, 41(5), pp. 361-378. ISSN 01446193

Borg Axisa, G and Borg, R P (2024) Climate change adaptation in Malta: Assessment of skills in the built environment. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 668-679. ISSN 1759-5916

Borges, Maria Luiza Abath Escorel (2025) Decision-making optimization method for construction site layout planning based on slp and BIM. PhD thesis, Universidade Estadual de Campinas, Brazil.

Borges, W F and Mário, P D C (2017) Five project-duration control methods in time units: Case study of a linearly distributed planned value. Journal of Construction Engineering and Management, 143(6): 05017002, ISSN 0733-9364

Borja, Luis Claudio Alves (2019) Development of a quantitative method for predicting environmental aspects generated by construction sites. PhD thesis, Universidade Federal da Bahia, Brazil.

Boroujeni, K A (2023) Visual data analytic and robotics for automated construction performance monitoring. PhD thesis, North Carolina State University, USA.

Bortey, L; Edwards, D J; Roberts, C and Rillie, I (2025) Unravelling incipient accidents: A machine learning prediction of incident risks in highway operations. Smart and Sustainable Built Environment, 14(6), pp. 1991-2022. ISSN 2046-6099

Borthwick, F (2002) The impact of the European Construction Products Directive on UK construction product manufacturers. PhD thesis, De Montfort University, UK.

Borthwick, F and McAndrew, P (2012) Cultural interpretation of health and safety and its appropriateness in the United Arab Emirates. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bosch, A; Volker, L and Koutamanis, A (2015) BIM in the operations stage: Bottlenecks and implications for owners. Built Environment Project and Asset Management, 5(3), pp. 331-343. ISSN 2044-124X

Bosch-Sijtsema, P and Buser, M (2017) Construction and demolition waste management on the building site: A literature review. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Bosch-Sijtsema, P; Claeson-Jonsson, C; Johansson, M and Roupe, M (2021) The hype factor of digital technologies in AEC. Construction Innovation, 21(4), pp. 899-916. ISSN 1471-4175

Bosfield, R; Gibson, G E and Din, Z U (2026) Open repository development framework for knowledge sharing: Best practices in the architecture, engineering, and construction industry. International Journal of Construction Management, 26(1), pp. 12-28. ISSN 1562-3599

Bosher, L; Dainty, A; Carrillo, P and Glass, J (2007) Built-in resilience to disasters: A pre-emptive approach. Engineering, Construction and Architectural Management, 14(5), pp. 434-446. ISSN 0969-9988

Bostan, B. B.; Çavka, H. B.; Citipitioglu, A. M. and Pehlivan, D. Z. (2026) Retrospective BIM performance analysis based on construction big data. Engineering, Construction and Architectural Management, 33(7), pp. 5991-6013. ISSN 0969-9988

Bouazza, T (2019) The design of healthcare facilities: knowledge, methods and effectiveness. PhD thesis, Northumbria University, UK.

Bouazza, T and Greenwood, D (2020) An investigation of performance gaps in the design of UK healthcare facilities. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Boudlal, Youssef Ait (2014) Project management and its relation to long-term project success: An empirically based theoretical framework. PhD thesis, University of Louisville, USA.

Bougrain, F (2012) Energy performance and public private partnership. Built Environment Project and Asset Management, 2(1), pp. 41-55. ISSN 2044-124X

Bouraoui, D and Lizarralde, G (2013) Centralized decision making, users' participation and satisfaction in post-disaster reconstruction: The case of Tunisia. International Journal of Disaster Resilience in the Built Environment, 4(2), pp. 145-167. ISSN 1759-5916

Bourdakis, V (1994) Performance appraisal of sportshall and swimming pool buildings in Greece. PhD thesis, University of Bath, UK.

Bourdeau, L (1999) Sustainable development and the future of construction: A comparison of visions from various countries. Building Research & Information, 27(6), pp. 354-366. ISSN 0961-3218

Bourgeois, I.; Ferreira, V. and Rodrigues, H. (2026) From monitoring to forecasting: Predictive modelling of thermal-induced displacements in heritage masonry: The batalha monastery case study. International Journal of Building Pathology and Adaptation, 44(9), pp. 16-34. ISSN 2398-4708

Bourgeois, I.; Ferreira, V. and Rodrigues, H. (2026) From monitoring to forecasting: Predictive modelling of thermal-induced displacements in heritage masonry: The Batalha Monastery case study. International Journal of Building Pathology and Adaptation, 44(9), pp. 16-34. ISSN 2398-4708

Boustras, G; Bratskas, R; Tokakis, V and Efstathiades, A (2011) Safety awareness of practitioners in the Cypriot manufacturing sector. Journal of Engineering, Design and Technology, 9(1), pp. 19-31. ISSN 1726-0531

Bowen, P.; Govender, R.; Edwards, P. and Cattell, K. (2015) Tested or not? A categorical examination of HIV/AIDS testing among workers in the South African construction industry. Journal of Construction Engineering and Management, 141(12): 04015040, ISSN 0733-9364

Bowen, P; Allen, Y; Edwards, P; Cattell, K and Simbayi, L (2014) Guidelines for effective workplace HIV/AIDS intervention management by construction firms. Construction Management and Economics, 32(4), pp. 362-381. ISSN 01446193

Bowen, P and Cattell, K (2008) Job satisfaction of South African quantity surveyors. Engineering, Construction and Architectural Management, 15(3), pp. 260-269. ISSN 0969-9988

Bowen, P; Cattell, K; Michell, K and Edwards, P (2008) Job satisfaction of South Africa quantity surveyors: Are employers happier than employees? Journal of Engineering, Design and Technology, 6(2), pp. 124-144. ISSN 1726-0531

Bowen, P; Edwards, P and Lingard, H (2013) Workplace stress among construction professionals in South Africa the role of harassment and discrimination. Engineering, Construction and Architectural Management, 20(6), pp. 620-635. ISSN 0969-9988

Bowen, P; Edwards, P; Lingard, H and Cattell, K (2014) Predictive modeling of workplace stress among construction professionals. Journal of Construction Engineering and Management, 140(3): 4013055, ISSN 0733-9364

Bowen, P; Edwards, P; Simbayi, L and Cattell, K (2013) HIV/AIDS interventions by construction firms in the Western cape, South Africa: A thematic analysis of qualitative survey data. International Journal of Construction Management, 13(4), pp. 11-33. ISSN 1562-3599

Bowen, P; Govender, R and Edwards, P (2014) Structural equation modeling of occupational stress in the construction industry. Journal of Construction Engineering and Management, 140(9): 04014042, ISSN 0733-9364

Bowen, P; Govender, R and Edwards, P (2018) Determinants of aids knowledge among construction workers. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Bowen, P; Govender, R; Edwards, P and Cattell, K (2014) Workplace stress in the construction industry: An explanatory model. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Bowen, P; Govender, R; Edwards, P and Cattell, K (2015) Tested or not? a categorical examination of HIV/AIDS testing among workers in the South African construction industry. Journal of Construction Engineering and Management, 141(12): 04015040, ISSN 0733-9364

Bowen, P; Govender, R; Edwards, P and Cattell, K (2016) An explanatory model of attitudinal fear of HIV/AIDS testing in the construction industry. Engineering, Construction and Architectural Management, 23(1), pp. 92-112. ISSN 0969-9988

Bowen, P; Govender, R; Edwards, P and Cattell, K (2018) Work-related contact, work-family conflict, psychological distress and sleep problems experienced by construction professionals: An integrated explanatory model. Construction Management and Economics, 36(3), pp. 153-174. ISSN 0144-6193