Items with Descriptive Scope: 3 PCT

Aban, J L (2025) Book review: Reframing rural resilience: A narrative exploration of disaster risk reduction in marginalized landscapes. International Journal of Disaster Resilience in the Built Environment, 16(5), pp. 729-731. ISSN 1759-5908

Abanda, F H and Tah, J H M (2008) Towards developing a sustainable building technology ontology. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Abbas, N M A and Reda, R M (1997) The engineering consultancy profession "analysis and development". In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Abbasi, A (2007) An exploratory study of research and development in construction in the developing countries of the Middle East. PhD thesis, University of Salford, UK.

Abbasianjahromi, H and Etemadi, A (2022) Applying social network analysis to identify the most effective persons according to their potential in causing accidents in construction projects. International Journal of Construction Management, 22(6), pp. 1065-1078. ISSN 1562-3599

Abbott, M and Carson, C (2013) A comparative approach to determining the growth of productivity of the New Zealand construction industry. Construction Economics and Building, 13(4), pp. 65-77. ISSN 2204-9029

Abdelhadi, Y; Dulaimi, M F and Bajracharya, A (2019) Factors influencing the selection of delay analysis methods in construction projects in UAE. International Journal of Construction Management, 19(4), pp. 329-340. ISSN 1562-3599

Abdelhamid, T S and Everett, J G (2002) Physiological demands during construction work. Journal of Construction Engineering and Management, 128(5), pp. 427-437. ISSN 0733-9364

Abdelmohsen, S M A (2011) An ethnographically informed analysis of design intent communication in BIM-enabled architectural practice. PhD thesis, Georgia Institute of Technology, USA.

Abdelrahman, M; Zayed, T and Elyamany, A (2008) Best-value model based on project specific characteristics. Journal of Construction Engineering and Management, 134(3), pp. 179-188. ISSN 0733-9364

Abdirad, H (2017) Metric-based BIM implementation assessment: A review of research and practice. Architectural Engineering and Design Management, 13(1), pp. 52-78. ISSN 1745-2007

Abdirad, H (2020) Developing digital project delivery routines around frequent disruptions: How do AEC organizations respond to disruptive information exchange requirements? PhD thesis, University of Washington, USA.

Abduh, M and Skibniewski, M J (2004) Electronic networking technologies in construction. Journal of Construction Research, 5(1), pp. 17-42. ISSN 1609-9451

Abdul Nabi, M and El-Adaway, I H (2022) A proactive risk assessment framework to maximize schedule benefits of modularization in construction projects. Journal of Construction Engineering and Management, 148(7): 002311, ISSN 0733-9364

Abdul Nabi, M and El-Adaway, I H (2022) Understanding disputes in modular construction projects: Key common causes and their associations. Journal of Construction Engineering and Management, 148(1): 04021184, ISSN 0733-9364

Abdul-Aziz, A R (2001) Foreign workers and labour segmentation in Malaysia's construction industry. Construction Management and Economics, 19(8), pp. 789-798. ISSN 01446193

Abdul-Aziz, A R and Awil, A U (2010) Examining the internationalisation of Malaysian housing developers using the eclectic paradigm. International Journal of Construction Management, 10(1), pp. 1-15. ISSN 1562-3599

Abdul-Aziz, A R and Chwee Ngoh Tan, A M Y (1998) GATT, GATS and the global construction industry. Engineering, Construction and Architectural Management, 5(1), pp. 31-37. ISSN 0969-9988

Abdul-Aziz, A-R (2001) Clandestine foreign site operatives in Japan: A focus on Malaysians. Journal of Construction Procurement, 7(1), pp. 51-72. ISSN 1358-9180

Abdullahi, B; Ibrahim, Y M; Ibrahim, A and Bala, K (2020) Development of e-tendering evaluation system for Nigerian public sector. Journal of Engineering, Design and Technology, 18(1), pp. 122-149. ISSN 1726-0531

Abdullahi, B; Ibrahim, Y M; Ibrahim, A D and Bala, K (2022) Development of web-based e-tendering system for Nigerian public procuring entities. International Journal of Construction Management, 22(2), pp. 278-291. ISSN 1562-3599

Abeysekera, W V K M and Thorpe, A (1997) Standardisation or non-standardisation? The case of brickwork in Sri Lanka. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Aboagye-Nimo, E and Raidén, A B (2019) Challenging standardisation by embracing ambiguities of site safety: The case of micro construction firms. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Abou Houraira, A; Ouali, A; Elhammoumi, O and Fekri, A (2023) Effect of accelerated aging by temperature and moisture variation cycles on the durability of concrete. International Journal of Building Pathology and Adaptation, 41(3), pp. 533-548. ISSN 23984708

Aboukhadra, W (2021) Learning organisation, affective commitment and cultural intelligence: the case of expatriates in the Gulf Co-operation Council countries. PhD thesis, Nottingham Trent University, UK.

Aboushiwa, M A A (2000) Promoter briefing on the procurement and selection of contract strategy offering the best value for money. PhD thesis, University of Manchester, UK.

Abraham, G L (2002) Identification of critical success factors for construction organizations in the architectural /engineering /construction (A/E/C) industry. PhD thesis, Georgia Institute of Technology, USA.

Abraham, K A (2015) Influencing the design decision process: Information visualization in multi-criteria decision support systems for early-stage building design. PhD thesis, Stanford University, USA.

Abrishami, S; Goulding, J; Pour, R F and Ganah, A (2015) Virtual generative BIM workspace for maximising AEC conceptual design innovation: A paradigm of future opportunities. Construction Innovation, 15(1), pp. 24-41. ISSN 1471-4175

Abu Bakar, A H B (2004) Factors affecting technology transfer to indigenous construction companies in developing countries: a Malaysian experience. PhD thesis, University College London, UK.

Abu Hanipah, A F F and Tahar, K N (2018) Development of the 3D dome model based on a terrestrial laser scanner. International Journal of Building Pathology and Adaptation, 36(2), pp. 122-136. ISSN 23984708

Abu Rumman, M; Hiyassat, M; Alsmadi, B; Jamrah, A and Alqam, M (2009) A surface water management model for the Integrated Southern Ghor Project, Jordan. Construction Innovation, 9(3), pp. 298-322. ISSN 1471-4175

Abubakri, S; Mangat, P S; Grigoriadis, K and Starinieri, V (2025) Pore properties and moisture loss of repair mortars under low-impact microwave curing. International Journal of Building Pathology and Adaptation, 43(4), pp. 749-765. ISSN 2398-4708

Abudayyeh, O (2003) Undergraduate research mentoring model in construction engineering and management. Journal of Construction Engineering and Management, 129(1), pp. 65-69. ISSN 0733-9364

Abudayyeh, O; Dibert-DeYoung, A and Jaselskis, E (2004) Analysis of trends in construction research: 1985-2002. Journal of Construction Engineering and Management, 130(3), pp. 433-439. ISSN 0733-9364

Abudayyeh, O; Russell, J; Johnston, D and Rowings, J (2000) Construction engineering and management undergraduate education. Journal of Construction Engineering and Management, 126(3), pp. 169-175. ISSN 0733-9364

Abudayyeh, O Y and Rasdorf, W J (1991) Design of construction industry information management systems. Journal of Construction Engineering and Management, 117(4), pp. 698-715. ISSN 0733-9364

Acar, E; Wall, J; McNamee, F; Carney, M and Öney-Yazici, E (2008) Innovative safety management training through e-learning. Architectural Engineering and Design Management, 4(3-4), pp. 239-250. ISSN 1745-2007

Ackerman Jr., P J (2014) Condition assessment, indices, and risk-based decision-making for public school infrastructure management. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Addae-Dapaah, K and Ching, W H (2003) Effects of property acquisition and disposal on property stock value. Journal of Financial Management of Property and Construction, 8(3), pp. 139-154. ISSN 1366-4387

Ade, R and Rehm, M (2020) The unwritten history of green building rating tools: A personal view from some of the 'founding fathers'. Building Research & Information, 48(1), pp. 1-17. ISSN 0961-3218

Adebayo, A K; Price, A D F and Gibb, A G F (2006) Impact of modern methods of construction on healthcare infrastructure. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Adeleye, T; Huang, M; Huang, Z and Sun, L (2013) Predicting loss for large construction companies. Journal of Construction Engineering and Management, 139(9), pp. 1224-1236. ISSN 0733-9364

Adendorff, G L (2014) Possible futures for the African built environment towards 2050. PhD thesis, Nelson Mandela Metropolitan University, South Africa.

Adeyemi, H O; Adejuyigbe, S B; Ismaila, S O and Adekoya, A F (2015) Low back pain assessment application for construction workers. Journal of Engineering, Design and Technology, 13(3), pp. 419-434.

Adeyeye, K; Pasquire, C; Bouchlaghem, D and Chandler, J (2006) Exploring the efficacy of digital tools for the design and construction of hybrid buildings. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Adibfar, A (2020) Bridge digital twins: Fusion of intelligent transportation systems (ITS) sensor data and bridge information modeling (BRIM) for interoperability. PhD thesis, University of Florida, USA.

Adnan, N. A.; Ramali, F. N.; Yahya, N.; Amin, N. D. M.; Sabil, A.; Mohd Siraj, S. and Ismail, N. (2025) Preservation strategies for historic timber mosques: Structural integrity assessment on masjid jamek an nur, Batu Pahat, Johor. Journal of Construction in Developing Countries, 30(2), pp. 343-361. ISSN 1823-6499

Adshead, J (2009) An integrated approach to water protection and management: The European Union model. International Journal of Law in the Built Environment, 1(3), pp. 234-243. ISSN 1756-1450

Adshead, J (2014) Revisiting the ideologies of planning law: Private property, public interest and public participation in the legal framework of England and Wales. International Journal of Law in the Built Environment, 6(1-2), pp. 174-193. ISSN 1756-1450

Adu-Gyamfi, B; Ariyaningsih, A; Zuquan, H; Yamazawa, N; Kato, A and Shaw, R (2024) Reflections on science, technology and innovation on the aspirations of the Sendai framework for disaster risk reduction. International Journal of Disaster Resilience in the Built Environment, 15(2), pp. 289-302. ISSN 1759-5916

Afeez, A and Kumar, A (2013) Application of CAD and reverse engineering methodology for development of complex assemblies. Journal of Engineering, Design and Technology, 11(3), pp. 375-390. ISSN 1726-0531

Afetornu, C and Edum-Fotwe, F T (2005) Characterising project contingency budget in construction. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Afful, A E; Ayarkwa, J; Acquah, G K K and Osei-Asibey, D (2023) Enablers of incorporating indoor environmental quality (IEQ) principles into buildings. Smart and Sustainable Built Environment, 12(1), pp. 38-59. ISSN 2046-6099

Afreen, M; Haq, F and Mukhtar, Z (2022) Flood susceptibility analysis of the panjkora valley Northern Pakistan, using frequencyratio approach. International Journal of Disaster Resilience in the Built Environment, 13(5), pp. 601-614. ISSN 1759-5916

Agapiou, A (2022) Briefing: The role of the technology and construction court in alternative dispute resolution. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(2), pp. 61-64. ISSN 1751-4304

Agapiou, A and Dainty, A R J (2003) Client-led approaches to increasing participation of women, ethnic minorities and disabled people in the construction workforce: A framework for change. Journal of Construction Procurement, 9(2), pp. 4-16. ISSN 1358-9180

Agapiou, A; Flanagan, R; Norman, G and Notman, D (1998) The changing role of builders merchants in the construction supply chain. Construction Management and Economics, 16(3), pp. 351-361. ISSN 01446193

Agapiou, A; Price, A D F and McCaffer, R (1995) Planning future construction skill requirements: Understanding labour resource issues. Construction Management and Economics, 13(2), pp. 149-161. ISSN 01446193

Aggarwal, A; Rani, A and Kumar, M (2020) A robust method to authenticate car license plates using segmentation and ROI based approach. Smart and Sustainable Built Environment, 9(4), pp. 737-747. ISSN 2046-6099

Aggarwal, T and Solomon, P (2020) Quantitative analysis of the development of smart cities in India. Smart and Sustainable Built Environment, 9(4), pp. 711-726. ISSN 2046-6099

Aghimien, D O; Aigbavboa, C O; Oke, A E and Thwala, W D (2020) Mapping out research focus for robotics and automation research in construction-related studies: A bibliometric approach. Journal of Engineering, Design and Technology, 18(5), pp. 1063-1079. ISSN 1726-0531

Aghimien, E I and Li, D H W (2022) Application of luminous efficacies for daylight illuminance data generation in subtropical Hong Kong. Smart and Sustainable Built Environment, 11(2), pp. 271-293. ISSN 2046-6099

Aguado, A; Caño, A D; De La Cruz, M P; Gómez, D and Josa, A (2012) Sustainability assessment of concrete structures within the Spanish structural concrete code. Journal of Construction Engineering and Management, 138(2), pp. 268-276. ISSN 0733-9364

Agyekum, K; Hammond, S F; Acheampong, A O and Gasue, R (2025) On the limited damp-proofing of residential buildings: Do social norms matter? International Journal of Building Pathology and Adaptation, 43(7), pp. 1840-1862. ISSN 2398-4708

Agyekum, K; Blay, K and Opoku, A (2019) Mechanisms for preventing rising damp in new building infrastructure. International Journal of Building Pathology and Adaptation, 37(1), pp. 87-107. ISSN 23984708

Agyekum-Mensah, G and Knight, A D (2017) The professionals' perspective on the causes of project delay in the construction industry. Engineering, Construction and Architectural Management, 24(5), pp. 828-841. ISSN 0969-9988

Ahadzie, D K; Proverbs, D G and Olomolaiye, P (2005) Project managers' performance measures: A fresh perspective. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Ahiaga-Dagbui D D, T O and Smith S D, W S (2013) A neuro-fuzzy hybrid model for predicting final cost of water infrastructure projects. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Ahmad, I U; Russell, J S and Abou-Zeid, A (1995) Information technology (IT) and integration in the construction industry. Construction Management and Economics, 13(2), pp. 163-171. ISSN 01446193

Ahmad, I U and Sein, M K (1997) Construction project teams for TQM: A factor-element impact model. Construction Management and Economics, 15(5), pp. 457-467. ISSN 01446193

Ahmad, R K and Gibb, A G F (2003) Measuring safety culture with SPMT: Field-data. Journal of Construction Research, 4(1), pp. 29-44. ISSN 1609-9451

Ahmad Shazali, A S and Tahar, K N (2020) Virtual 3D model of canseleri building via close-range photogrammetry implementation. International Journal of Building Pathology and Adaptation, 38(1), pp. 217-227. ISSN 23984708

Ahmadi, Ehsan (2025) Memory-augmented llm agent for predicting locomotion modes in construction activities. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Ahmadi Esfahani, N and Shahandashti, M (2020) Post-hazard labor wage fluctuations: A comparative empirical analysis among different sub-sectors of the U.S. Construction sector. Journal of Financial Management of Property and Construction, 25(3), pp. 313-330. ISSN 1366-4387

Ahmadian, F F A; Rashidi, T H; Akbarnezhad, A and Waller, S T (2017) BIM-enabled sustainability assessment of material supply decisions. Engineering, Construction and Architectural Management, 24(4), pp. 668-695. ISSN 0969-9988

Ahmed, I (2020) Considerations and principles for conducting a participatory capacity and vulnerability analysis (PCVA) for disaster risk reduction and climate change adaptation. International Journal of Disaster Resilience in the Built Environment, 12(4), pp. 371-386. ISSN 1759-5916

Ahmed, M; Shakaib, M and Siddiqui, M A (2024) Analysis and comparison of flow velocities and in-cylinder temperature distributions to quantify oxides of nitrogen in a compression ignition engine using diesel and biodiesel fuels. Journal of Engineering, Design and Technology, 22(2), pp. 422-437. ISSN 1726-0531

Ahmed, M O; El-Adaway, I H; Coatney, K T and Eid, M S (2016) Construction bidding and the winner's curse: Game theory approach. Journal of Construction Engineering and Management, 142(2): 04015076, ISSN 0733-9364

Ahmed, M O and El-adaway, I H (2023) An integrated game-theoretic and reinforcement learning modeling for multi-stage construction and infrastructure bidding. Construction Management and Economics, 41(3), pp. 183-207. ISSN 01446193

Ahmed, Q A (1993) A knowledge-based system approach to work shift selection for multilane highway reconstruction and maintenance projects. PhD thesis, University of Florida, USA.

Ahn, C (2012) An integrated framework for sustainable construction processes: Understanding and managing the environmental performance of construction operations. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Ahn, S; Lee, S and Steel, R P (2013) Effects of workers' social learning: Focusing on absence behavior. Journal of Construction Engineering and Management, 139(8), pp. 1015-1025. ISSN 0733-9364

Ahn, Y H; Holley, P and Kang, J S (2009) Risk management of exchange rates in international construction. International Journal of Construction Education and Research, 5(1), pp. 24-44. ISSN 1557-8771

Aho, I (2013) Value-added business models: Linking professionalism and delivery of sustainability. Building Research & Information, 41(1), pp. 110-114. ISSN 0961-3218

Aigbavboa, C; Addo, L Y; Ebekozien, A; Thwala, W D and Arthur-Aidoo, B M (2023) Developing a framework for effective institutional management of Ghana's urban water supply. International Journal of Building Pathology and Adaptation, 41(6), pp. 290-302. ISSN 23984708

Aijazi, O (2015) Social repair and structural inequity: Implications for disaster recovery practice. International Journal of Disaster Resilience in the Built Environment, 6(4), pp. 454-467. ISSN 1759-5916

Ailabouni, N (2010) Factors affecting employee productivity in the UAE construction industry. PhD thesis, University of Brighton, UK.

Ainge, Judith Alison (2016) Walls of iron: Nineteenth century prefabricated iron buildings in Australia. PhD thesis, University of Sydney, Australia.

Ajayi, S O; Jones, W and Unuigbe, M (2019) Occupational stress management for UK construction professionals: Understanding the causes and strategies for improvement. Journal of Engineering, Design and Technology, 17(4), pp. 819-832. ISSN 1726-0531

Ajayi, S O; Oyebiyi, F and Alaka, H A (2023) Facilitating compliance with BIM ISO 19650 naming convention through automation. Journal of Engineering, Design and Technology, 21(1), pp. 108-129. ISSN 1726-0531

Ajslev, J Z N and Møller, J L (2023) The art of role-switching: Positioning practices and the relational roles of OSH coordinators in the Danish construction industry. Construction Management and Economics, 41(9), pp. 703-723. ISSN 01446193

Ajslev, J Z N; Wåhlin-Jacobsen, C D; Brandt, M; Møller, J L and Andersen, L L (2020) Losing face from engagement: an overlooked risk in the implementation of participatory organisational health and safety initiatives in the construction industry. Construction Management and Economics, 38(9), pp. 824-839. ISSN 01446193

Akande, O K (2015) Factors influencing operational energy performance and refurbishment of UK listed church buildings: towards a strategic management framework. PhD thesis, Anglia Ruskin University, UK.

Akanmu, A; Anumba, C and Messner, J (2014) Critical review of approaches to integrating virtual models and the physical construction. International Journal of Construction Management, 14(4), pp. 267-282. ISSN 1562-3599

Akar, G (2009) Analysis of activity choice: The role of activity attributes and individual schedules. PhD thesis, University of Maryland, College Park, USA.

Akbiyikli, R (2005) The holistic realisation of PFI road project objectives in the UK. PhD thesis, University of Salford, UK.

Akbiyikli, R and Eaton, D (2004) Risk management in PFI procurement: A holistic approach. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Akinci, B; Fischer, M and Kunz, J (2002) Automated generation of work spaces required by construction activities. Journal of Construction Engineering and Management, 128(4), pp. 306-315. ISSN 0733-9364

Akinci, B; Fischer, M; Kunz, J and Levitt, R (2002) Representing work spaces generically in construction method models. Journal of Construction Engineering and Management, 128(4), pp. 296-305. ISSN 0733-9364

Akiner, I and Tijhuis, W (2007) Work goal orientation of construction professionals in Turkey: Comparison of architects and civil engineers. Construction Management and Economics, 25(11), pp. 1165-1175. ISSN 01446193

Akintola, A; Root, D and Venkatachalam, S (2017) Key constraints to optimal and widespread implementation of BIM in the South African construction industry. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Akintoye, A and Sommerville, J (1995) Distributed lag relationships between UK construction orders and output. Construction Management and Economics, 13(1), pp. 33-42. ISSN 01446193

Akinyemi, A; Sun, M and Gray, A J G (2018) An ontology-based data integration framework for construction information management. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 171(3), pp. 111-125. ISSN 17514304

Akmam Syed Zakaria, S; Gajendran, T; Rose, T and Brewer, G (2018) Contextual, structural and behavioural factors influencing the adoption of industrialised building systems: A review. Architectural Engineering and Design Management, 14(1-2), pp. 3-26. ISSN 1745-2007

Akpan, E O P and Igwe, O (2001) Methodology for determining price variation in project execution. Journal of Construction Engineering and Management, 127(5), pp. 367-373. ISSN 0733-9364

Aksorn, T and Hadikusumo, B H W (2007) Gap analysis approach for construction safety program improvement. Journal of Construction in Developing Countries, 12(1), pp. 77-97. ISSN 1823-6499

Aksoy Tırmıkçı, C and Yavuz, C (2019) Environmental life cycle analysis of a fixed PV energy system and a two-axis sun tracking PV energy system in a low-energy house in Turkey. Smart and Sustainable Built Environment, 8(5), pp. 391-399. ISSN 2046-6099

Aktas, C B (2011) Impact of product lifetime on life cycle assessment results. PhD thesis, University of Pittsburgh, USA.

Al Ahbabi, M and Alshawi, M (2015) BIM for client organisations: A continuous improvement approach. Construction Innovation, 15(4), pp. 402-408. ISSN 1471-4175

Al Rashdi, A (2012) A strategic framework for the further enhancement of the standard forms of construction contract in the Sultanate of Oman. PhD thesis, University of Salford, UK.

Al Rfoa, S K; Jaafar, M and Mohd Raslim, F (2023) Influences of high-performance work practices on trust in organisation in Jordanian construction firms. International Journal of Construction Management, 23(10), pp. 1715-1725. ISSN 1562-3599

Al-Bayati, A J and Al-Zubaidi, H A (2018) Inventory of nanomaterials in construction products for safety and health. Journal of Construction Engineering and Management, 144(9): 06018004, ISSN 0733-9364

Al-Bayati, A J; Eiris, R; Hernandez, G O and Al-Bayati, M A (2023) Addressing social inequity in construction safety research: Personal protective equipment focus. Journal of Construction Engineering and Management, 149(12): 04023127, ISSN 0733-9364

Al-Biqami, N M (2001) Virtual procurement system for virtual enterprises. PhD thesis, University of Nottingham, UK.

Al-Bizri, S (1995) Design management plan generator, knowledge-based system for planning the design processes in the construction industry. PhD thesis, University of Reading, UK.

Al-Bizri, S and Gray, C (2010) Management framework for technology clusters implementation. Construction Management and Economics, 28(7), pp. 771-782. ISSN 1466433X

Al-Bizri, S and Gray, C (2014) A decision support framework for hcai risk assessment and design briefing of healthcare facilities. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Al-Gahtani, K S (2006) A comprehensive construction delay analysis technique: Enhanced with a float ownership concept. PhD thesis, State University of New York at Buffalo, USA.

Al-Hadidi, S; Sweis, G; Abu-Khader, W; Abu-Rumman, G and Sweis, R (2024) Managing future urbanization growth patterns using genetic algorithm modeling. Engineering, Construction and Architectural Management, 31(7), pp. 2648-2668. ISSN 0969-9988

Al-Hammad, I A (1991) A knowledge-based framework for construction methods selection. PhD thesis, University of British Columbia, Canada.

Al-Hussein, M (1999) An integrated information system for crane selection and utilisation. PhD thesis, Concordia University, Canada.

Al-Kaisy, A and Nassar, K (2009) Developing a decision support tool for nighttime construction in highway projects. Journal of Construction Engineering and Management, 135(2), pp. 119-125. ISSN 0733-9364

Al-Khazraji, M S; Bakhy, S H and Jweeg, M J (2024) Composite sandwich structures: Review of manufacturing techniques. Journal of Engineering, Design and Technology, 22(5), pp. 1616-1636. ISSN 1726-0531

Al-Khazraji, M S; Jweeg, M J and Bakhy, S H (2024) Free vibration analysis of a laminated honeycomb sandwich panel: A suggested analytical solution and a numerical validation. Journal of Engineering, Design and Technology, 22(2), pp. 316-343. ISSN 1726-0531

Al-Kheetan, M J; Rahman, M M and Chamberlain, D A (2018) Remediation and protection of masonry structures with crystallising moisture blocking treatment. International Journal of Building Pathology and Adaptation, 36(1), pp. 77-92. ISSN 23984708

Al-Mansouri, O (1988) The relationship between the designer and contractor in Saudi Arabia. PhD thesis, University of Reading, UK.

Al-Momani, A H (1996) Construction cost prediction for public school buildings in Jordan. Construction Management and Economics, 14(4), pp. 311-317. ISSN 01446193

Al-Nakeeb, A A R (2000) An assessment of the effectiveness of quality assurance systems in the construction industry. PhD thesis, University of South Wales, UK.

Al-Nasser, A A (2001) Optimisation of construction implemented as a manufacturing process. PhD thesis, University of Sussex, UK.

Al-Sasi, B O (2007) A lean approach to capacity management in construction. PhD thesis, University of Southampton, UK.

Al-Shabbani, Z (2019) Improving safety performance of highway maintenance crews through pre-task safety toolbox talks. PhD thesis, University of Kentucky, USA.

Al-Sharif, F and Kaka, A (2004) PFI/PPP topic coverage in construction journals. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Al-Sobiei, O S; Arditi, D and Polat, G (2005) Managing owner's risk of contractor default. Journal of Construction Engineering and Management, 131(9), pp. 973-978. ISSN 0733-9364

Al-Tawal, D R; Arafah, M and Sweis, G J (2021) A model utilizing the artificial neural network in cost estimation of construction projects in Jordan. Engineering, Construction and Architectural Management, 28(9), pp. 2466-2488. ISSN 0969-9988

Al-Yami, A M and Price, A D F (2005) Exploring conceptual linkages between value engineering and sustainable construction. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Al-Zubaidi, H and Allouzi, R (2025) Flexural behavior of slabs made of lightweight foamed concrete with basalt powder. Journal of Engineering, Design and Technology, 23(1), pp. 249-263. ISSN 1726-0531

Al-saeed, Y W; Ahmed, A and Pärn, E A (2020) An 80-year projection of nZEB strategies in extreme climatic conditions of Iraq. International Journal of Building Pathology and Adaptation, 38(3), pp. 472-492. ISSN 23984708

AlMaian, R Y (2014) A strategic approach to effectively manage supplier quality within the construction industry. PhD thesis, University of Arkansas, USA.

AlMunifi, A A and Almutairi, S (2021) Lessons learned framework for efficient delivery of construction projects in Saudi Arabia. Construction Economics and Building, 21(4), pp. 115-141. ISSN 2204-9029

AlQahtany, A; Rezgui, Y and Li, H (2013) A proposed model for sustainable urban planning development for environmentally friendly communities. Architectural Engineering and Design Management, 9(3), pp. 176-194. ISSN 1745-2007

AlSaggaf, A and Jrade, A (2023) Arcspat: An integrated building information modeling (BIM) and geographic information system (GIS) model for site layout planning. International Journal of Construction Management, 23(3), pp. 505-527. ISSN 1562-3599

Alam, Sadaf (2024) Development of the framework and the methodologies towards nzebs in Finland. PhD thesis, Aalto University, Finland.

Alansari, A M (2019) Risk assessment for marine construction projects. PhD thesis, Claremont Graduate University, USA.

Alashari, M; El-Rayes, K and Alotaibi, M (2023) Optimizing the planning of maintenance activities in education buildings. Journal of Construction Engineering and Management, 149(10): 04023094, ISSN 0733-9364

Alateeq, A; Elmedany, W; Ababneh, N and Curran, K (2022) Secure energy aware routing protocol for ieee 802.15.4 wireless sensor networks. Journal of Engineering, Design and Technology, 20(3), pp. 569-594. ISSN 1726-0531

Alavipour, S M R and Arditi, D (2019) Maximizing expected contractor profit using an integrated model. Engineering, Construction and Architectural Management, 26(1), pp. 118-138. ISSN 0969-9988

Albarkoly, K (2017) Exploring the maintenance practices and strategies in the Libyan cement industry. PhD thesis, Aston University, UK.

Albeaino, G; Brophy, P; Jeelani, I; Gheisari, M and Issa, R R A (2023) Impact of drone presence on construction individuals working at heights. Journal of Construction Engineering and Management, 149(11): 04023119, ISSN 0733-9364

Albert, A and Hallowel, M R (2013) Revamping occupational safety and health training: Integrating andragogical principles for the adult learner. Construction Economics and Building, 13(3), pp. 128-140. ISSN 2204-9029

Alcantara Jr., P T (1996) Development of a computer-understandable representation of design rationale to support value engineering. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Alchaer, E and Issa, C A (2020) Engineering productivity measurement: A novel approach. Journal of Construction Engineering and Management, 146(8): 0001875, ISSN 0733-9364

Aldridge, G; Pasquire, C; Gibb, A and Blismas, N G (2001) Methods for measuring the "unmeasurable": Evaluating the benefits of pre-assembly and standardization in construction. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Aleman, Rene Orlando (2023) Assessing the lack of project management soft skills toward project completion rates. PhD thesis, Liberty University, USA.

Alex, D P; Al Hussein, M; Bouferguene, A and Fernando, S (2010) Artificial neural network model for cost estimation: City of Edmonton's water and sewer installation services. Journal of Construction Engineering and Management, 136(7), pp. 745-756. ISSN 0733-9364

Alghadeer, Abdulaziz I (2013) Influence of socio-cultural and technological factors on the adoption of the project management office (pmo) in Saudi Arabia: An innovation diffusion perspective. PhD thesis, Griffith University, Saudi Arabia.

Alhamami, A (2021) Standardized qualification framework for achieving energy efficiency training for BIM. PhD thesis, Cardiff University, UK.

Ali, M S; Meem, T I; Hossain, M M and Ahmad, S I (2025) Unraveling the underlying causes and consequences of construction safety neglect: A multiperspective analysis of the Bangladeshi construction industry. International Journal of Building Pathology and Adaptation, 43(7), pp. 1792-1815. ISSN 2398-4708

Ali, A; Wang, H; Soomro, M A and Islam, T (2020) Shared leadership and team creativity: Construction industry perspective. Journal of Construction Engineering and Management, 146(10): 04020122, ISSN 0733-9364

Ali, G M; Bouferguene, A and Al-Hussein, M (2023) Crane mat layout optimization based on agent-based greedy and reinforcement-learning approach. Journal of Construction Engineering and Management, 149(8): 04023067, ISSN 0733-9364

Aliakbarlou, S; Wilkinson, S and Costello, S B (2017) Exploring construction client values and qualities: Are these two distinct concepts in construction studies? Built Environment Project and Asset Management, 7(3), pp. 234-252. ISSN 2044-124X

Alipouri, Y; Bokharaeian, A and Monfared, E (2025) Construction labor activity recognition via an imu-implemented wristband. Journal of Construction Engineering and Management, 151(11): 04025182, ISSN 0733-9364

Aliu, J; Oke, A E and Ehiosun, L U (2025) Distributed ledger technology integration in Nigerian construction industry: Key drivers. International Journal of Building Pathology and Adaptation, 43(7), pp. 1706-1724. ISSN 2398-4708

Aljassmi, H; Han, S and Davis, S (2014) Project pathogens network: New approach to analyzing construction-defects- generation mechanisms. Journal of Construction Engineering and Management, 140(1): 04013028, ISSN 0733-9364

Alkalbani, S; Rezgui, Y; Vorakulpipat, C and Wilson, I E (2013) ICT adoption and diffusion in the construction industry of a developing economy: The case of the Sultanate of Oman. Architectural Engineering and Design Management, 9(1), pp. 62-75. ISSN 1745-2007

Alkass, S; Alhussein, M and Moselhi, O (1997) Computerized crane selection for construction projects. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Alkass, S; Mazerolle, M and Harris, F (1996) Construction delay analysis techniques. Construction Management and Economics, 14(5), pp. 375-394. ISSN 01446193

Alkenaidari, A A (2019) Moving toward energy efficient buildings: A growing economic challenge for Saudi Arabia. PhD thesis, University of Cincinnati, USA.

Alkoc, E and Erbatur, F (1997) Productivity improvement in concreting operations through simulation models. Building Research & Information, 25(2), pp. 82-91. ISSN 0961-3218

Alkoc, E and Erbatur, F (1998) Site expert: A prototype knowledge-based expert system. Engineering, Construction and Architectural Management, 5(3), pp. 238-251. ISSN 0969-9988

Allam, A S; Bassioni, H; Ayoub, M and Kamel, W (2023) Investigating the performance of genetic algorithm and particle swarm for optimizing daylighting and energy performance of offices in alexandria, Egypt. Smart and Sustainable Built Environment, 12(3), pp. 682-700. ISSN 2046-6099

Allan, C; Sommerville, J; Kennedy, P and Robertson, H (2000) A business unit approach to construction process re-engineering. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Allen, P M (2008) The importance of complexity for the research agenda in the built environment. Architectural Engineering and Design Management, 4(1), pp. 5-14. ISSN 1745-2007

Allen, S and Hinks, J (1996) Comment: How long should housing last? Some implications of the age and probable life of housing in England. Construction Management and Economics, 14(6), pp. 531-535. ISSN 01446193

Allenby, V R (1986) Cost models for engineering services. PhD thesis, Aston University, UK.

Alli, N; van Niekerk, A and Wilson, S (2012) Benefits of freeway investment through innovative procurement. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(1), pp. 13-18. ISSN 17514304

Allison, L and Kaminsky, J (2017) Safety communication networks: Females in small work crews. Journal of Construction Engineering and Management, 143(8): 04017050, ISSN 0733-9364

Allmon, E; Haas, C T; Borcherding, J D and Goodrum, P M (2000) U.S. Construction labor productivity trends, 1970-1998. Journal of Construction Engineering and Management, 126(2), pp. 97-104. ISSN 0733-9364

Allotey, N K; Arku, G and Amponsah, P E (2010) Earthquake-disaster preparedness: The case of Accra. International Journal of Disaster Resilience in the Built Environment, 1(2), pp. 140-156. ISSN 1759-5916

Almarshad, A; Motawa, I and Ogunlana, S (2010) Knowledge management for public building maintenance in Kuwait. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Almazkoor, F B (2014) Two-stage methodology for managing and controlling material flow between multiple construction projects. PhD thesis, Clemson University, USA.

Almusharraf, A and Whyte, A (2016) Task-based defect management: Anatomical classification. Built Environment Project and Asset Management, 6(3), pp. 345-358. ISSN 2044-124X

Alnajjar, A (1995) Hyper automated estimating support system. PhD thesis, Illinois Institute of Technology, USA.

Alnaser, N W (2010) Utilisation of solar and wind energy in buildings in the Kingdom of Bahrain: a step towards sustainable building construction. PhD thesis, University of Reading, UK.

Alnaser, N W and Alnaser, W E (2022) Modelling the yield of 8.64 kw PV panels installed on a rooftop of a building in the Kingdom of Bahrain. Smart and Sustainable Built Environment, 11(1), pp. 162-174. ISSN 2046-6099

Alpert, I (1973) Competitive bidding on publicly-advertised construction projects. PhD thesis, New York University, Graduate School of Business Administration, USA.

Alshawi, M and Hassan, Z (1999) Integrated models for construction planning: Object flow and relationship. Engineering, Construction and Architectural Management, 6(2), pp. 197-212. ISSN 0969-9988

Alshawi, M A and Hope, A E (1989) Expert systems and contractual disputes: Extension of time under JCT 80. Construction Management and Economics, 7(1), pp. 65-74. ISSN 01446193

Alshboul, O. and Shehadeh, A. (2026) Conflict resolution and negotiation in construction projects using game theory: Achieving win-win outcomes. International Journal of Construction Management, 26(7), pp. 1341-1364. ISSN 1562-3599

Alsulami, Badr T (2012) Incorporating complexity and uncertainty into appraising sustainability of civil infrastructure systems: Hybrid fuzzy modelling approach. PhD thesis, Griffith University, Australia.

Alsulamy, S; Wamuziri, S and Taylor, M (2012) Evaluation of key metrics for measurement of project performance. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Altayeb, S (1992) Efficacy of drug testing programs implemented by contractors. Journal of Construction Engineering and Management, 118(4), pp. 780-790. ISSN 0733-9364

Alwisy, A; Bu Hamdan, S; Barkokebas, B; Bouferguene, A and Al-Hussein, M (2019) A BIM-based automation of design and drafting for manufacturing of wood panels for modular residential buildings. International Journal of Construction Management, 19(3), pp. 187-205. ISSN 1562-3599

Alzaed, A and Boussabaine, A H (2012) A conceptual model for user-centred passive building design. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Alzayd, Rana (2016) A constructability methodology to integrate planning and design for workers' safety in construction management. DrIng thesis, University of Braunschweig & University of Florence, Germany.

Alzubi, K. M.; Alaloul, W. S.; Al Salaheen, M.; Musarat, M. A.; Baarimah, A. O. and Mushtaha, A. W. (2025) Indoor construction productivity assessment using computer vision and mask region-based convolutional neural networks. Construction Innovation, 26(5), pp. 1523-1555. ISSN 1471-4175

Amadi, A (2019) A cross-sectional snapshot of the insider view of highway infrastructure delivery in the developing world. International Journal of Construction Management, 19(6), pp. 472-491. ISSN 1562-3599

Amany, A; Taghizade, K and Noorzai, E (2020) Investigating conflicts of expert contractors using the last planner system in building information modeling process. Journal of Engineering, Design and Technology, 18(6), pp. 1381-1402. ISSN 1726-0531

Amarasinghe, Sam (2025) Performance optimizing for precast concrete construction. PhD thesis, Queensland University of Technology, Australia.

Amaratunga, C A (2014) Building community disaster resilience through a virtual community of practice (VCOP). International Journal of Disaster Resilience in the Built Environment, 5(1), pp. 66-78. ISSN 1759-5916

Amarkhil, Q.; Alroomi, A. S. and Narimani, M. R. (2026) Leveraging BIM, EPS and constraint programming for automated scheduling: A methodology for structured scheduling data and combinatorial optimization. Engineering, Construction and Architectural Management, 33(3), pp. 1980-2006. ISSN 0969-9988

Amavasai, A (2023) Beyond the deterministic approach: On the feasibility of data assimilation methods in geotechnics. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Amirkhanian, S N; Burati, J L and Mirchandani, H C (1994) Effect of testing variability on contractor payment for asphalt pavements. Journal of Construction Engineering and Management, 120(3), pp. 579-592. ISSN 0733-9364

Amponsah, I (2008) Emerging civil infrastructure and environmental sustainability: Life-cycle assessment and multiobjective optimization. PhD thesis, University of South Carolina, USA.

Amran, M (2025) Innovative technology for converting automobile tire waste bead wires into recycled steel fibers for sustainable concrete composites: Insights for the Al-Kharj Governorate construction industry. International Journal of Building Pathology and Adaptation, 43(4), pp. 665-692. ISSN 2398-4708

Amran, M and Onaizi, A (2025) Sustainable admixtures to enhance long-term strength and durability properties of eco-concrete: An innovative use of Saudi agro-industrial by-products. International Journal of Building Pathology and Adaptation, 43(4), pp. 591-613. ISSN 2398-4708

An, J; Li, S and Wu, X P (2025) Multi-objective planning for time-cost trade-offs in multi-project parallel environment. Engineering, Construction and Architectural Management, 32(6), pp. 4051-4073. ISSN 0969-9988

Ancell, D (2005) Reducing costs: A practical application of performance-based specification and transaction cost theories. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Ancell, D (2013) Construction studies in higher education and the use of digital technology. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Anderson, P M (2006) Construction collaboration: a QFD approach. PhD thesis, Loughborough University, UK.

Anderson, S D; Fisher, D J and Rahman, S P (2000) Integrating constructability into project development: A process approach. Journal of Construction Engineering and Management, 126(2), pp. 81-88. ISSN 0733-9364

Andersson, L (1988) The theory of possibility and fuzzy sets: New ideas for risk analysis and decision-making. TaknDr thesis, Kungliga Tekniska Hogskolan, Sweden.

Andon, Paul James (2009) (Per)forming a public private partnership: The agency of accounting and other practices. PhD thesis, University of New South Wales, Australia.

Andrew, A; Murning, I; Pitt, M and Tucker, M (2008) Investment in the Scottish further education estate 19992006. Journal of Financial Management of Property and Construction, 13(3), pp. 209-216. ISSN 1366-4387

Andrew, C and Thoms, I M (2012) Design and construction of the Gautrain rapid rail link. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(1), pp. 41-54. ISSN 17514312

Ang, G; Groosman, M and Scholten, N P M (2005) Dutch performance-based approach to building regulations and public procurement. Building Research & Information, 33(2), pp. 107-119. ISSN 0961-3218

Angelides, D and Xenidis, Y (2005) A methodology for the development of a european approach concerning performance and risks of built systems. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Anike, E E; Saidani, M; Ganjian, E; Tyrer, M and Olubanwo, A O (2019) The potency of recycled aggregate in new concrete: a review. Construction Innovation, 19(4), pp. 594-613. ISSN 1471-4175

Ankrah, N A and Proverbs, D (2005) A framework for measuring construction project performance: Overcoming key challenges of performance measurement. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Anson, M and Siu, M F F (2020) Augmented balance point diagrams for matching site and concrete-supply resources. Journal of Construction Engineering and Management, 146(4): 04020021, ISSN 0733-9364

Anson, M; Ying, K C T and Siu, M F F (2019) Analytical models towards explaining the difficulty in efficiently matching site concrete supply resources with placing crew needs. Engineering, Construction and Architectural Management, 26(8), pp. 1672-1695. ISSN 0969-9988

Antoniadis, D N; Edum-Fotwe, F T and Thorpe, A (2006) Project reporting and complexity. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Antonopoulou, S (1987) The building industry in Greece: its role in the post-war Greek economy. PhD thesis, University College London, UK.

Anumba, C (2006) Application of GIS to labour market planning in construction. EngD thesis, Loughborough University, UK.

Anwer, S; Li, H; Antwi-Afari, M F; Umer, W; Mehmood, I and Wong, A Y L (2022) Effects of load carrying techniques on gait parameters, dynamic balance, and physiological parameters during a manual material handling task. Engineering, Construction and Architectural Management, 29(9), pp. 3415-3438. ISSN 0969-9988

Ao, Y; Peng, P; Li, M; Li, J; Wang, Y and Martek, I (2025) Empowering architecture, engineering and construction students through building information modeling competitions: a deep dive into behavioral motivation. Engineering, Construction and Architectural Management, 32(7), pp. 4475-4494. ISSN 0969-9988

Aoieong, R T; Tang, S L and Ahmed, S M (2002) A process approach in measuring quality costs of construction projects: Model development. Construction Management and Economics, 20(2), pp. 179-192. ISSN 01446193

Aouad, G F; Child, T; Brandon, P S and Sarshar, M (1998) Linking construction information through VR using an object oriented environment. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Aouad, G F; Lee, A and Wu, S (2005) ND modelling for collaborative working in construction. Architectural Engineering and Design Management, 1(1), pp. 33-44. ISSN 1745-2007

Aouad, G F; Sun, M and Faraj, I (2002) Automatic generation of data representations for construction applications. Construction Innovation, 2(3), pp. 151-165. ISSN 1471-4175

Apipattanavis, S; Sabol, K; Molenaar, K R; Rajagopalan, B; Xi, Y; Blackard, B and Patil, S (2010) Integrated framework for quantifying and predicting weather-related highway construction delays. Journal of Construction Engineering and Management, 136(11), pp. 1160-1168. ISSN 0733-9364

Apu, N and Das, U (2020) Tectonics and earthquake potential of Bangladesh: A review. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 295-307. ISSN 1759-5916

Arabiat, A (2013) Modelling construction client risk performance using organisation behaviour parameters. PhD thesis, Loughborough University, UK.

Arabiat, A; Edum-Fotwe, F T and McCaffer, R (2007) Does client behaviour actively induce risk in construction projects? In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Arabpour Roghabadi, M and Moselhi, O (2021) Optimized crew selection for scheduling of repetitive projects. Engineering, Construction and Architectural Management, 28(6), pp. 1517-1540. ISSN 0969-9988

Arafat, G H (1991) Concept evaluation in structural design utilizing multiattribute utility theory and a knowledge-based approach. PhD thesis, Wayne State University, USA.

Arain, F M and Pheng, L S (2007) Modeling for management of variations in building projects. Engineering, Construction and Architectural Management, 14(5), pp. 420-433. ISSN 0969-9988

Araújo, C S; Ferreira, E A M and Costa, D B (2025) System for tracking and managing metallic formworks adopted in cast-in-place concrete wall systems by integrating IoT and BIM. Construction Innovation, 25(4), pp. 1315-1341. ISSN 1471-4175

Arbabian, H (1998) Changes in building construction in an earthquake country. PhD thesis, University of Manchester, UK.

Arditi, D (1984) Graduate education in construction management. Construction Management and Economics, 2(3), pp. 193-199. ISSN 01446193

Arditi, D; Akan, G T and Gurdamar, S (1985) Reasons for delays in public projects in Turkey. Construction Management and Economics, 3(2), pp. 171-181. ISSN 01446193

Arditi, D and Albulak, M Z (1986) Line-of-balance scheduling in pavement construction. Journal of Construction Engineering and Management, 112(3), pp. 411-424. ISSN 0733-9364

Arditi, D; Kale, S and Tangkar, M (1997) Innovation in construction equipment and its flow into the construction industry. Journal of Construction Engineering and Management, 123(4), pp. 371-378. ISSN 0733-9364

Arditi, D; Koksal, A and Kale, S (2000) Business failures in the construction industry. Engineering, Construction and Architectural Management, 7(2), pp. 120-132. ISSN 0969-9988

Arditi, D; Tokdemir, O B and Suh, K (2001) Scheduling system for repetitive unit construction using line-of-balance technology. Engineering, Construction and Architectural Management, 8(2), pp. 90-103. ISSN 0969-9988

Arefizadeh, H and Shahir, H (2020) Three-dimensional analysis of anchored wall with concrete bearing pads. Journal of Engineering, Design and Technology, 18(6), pp. 1469-1486. ISSN 1726-0531

Arewa, A O; Olubodun, F and Peter Swai, L (2024) Exploring nuanced approach to criminalization of late payers in the construction sector. International Journal of Construction Management, 24(10), pp. 1136-1144. ISSN 1562-3599

Arif, F (2013) A decision support framework for infrastructure maintenance investment decision-making. PhD thesis, Florida International University, USA.

Arman, M H R (2014) Using option theory to manage risks in highway winter operations. PhD thesis, Purdue University, USA.

Armin, H.; Ahmadi Marzaleh, M.; Shojaei, P.; Jahangiri, M.; Hosseinekhah, H. and Peyravi, M. (2026) Urban resilience assessment: A best-worst method for component prioritization. International Journal of Disaster Resilience in the Built Environment, 17(4), pp. 469-491. ISSN 1759-5908

Arneson, E (2018) Construction capacity: How regional construction supply chains respond to disruptions. PhD thesis, University of Colorado at Boulder, USA.

Arocho Rosa, I d M (2015) The impact of transportation construction projects and activities on emissions. PhD thesis, North Carolina State University, USA.

Arowoiya, V A and Oyefusi, O N (2023) An analysis of the benefits of adopting modular construction: A Nigerian construction industry context. Journal of Construction in Developing Countries, 28(1), pp. 243-265. ISSN 1823-6499

Arriagada D, R E and Alarcón C, L F (2014) Knowledge management and maturation model in construction companies. Journal of Construction Engineering and Management, 140(4): B4013006, ISSN 0733-9364

Arslan, M (1993) Public investment and infrastructure planning: A policy modelling approach for the Turkish investment sector. PhD thesis, Colorado State University, USA.

Asad, R; Ahmed, I; Vaughan, J and von Meding, J K (2022) Traditional water knowledge: Challenges and opportunities to build resilience to urban floods. International Journal of Disaster Resilience in the Built Environment, 13(1), pp. 1-13. ISSN 1759-5916

Asadi, M and Karami, J (2020) Modeling of the city evacuation plan in case of earthquake with particle swarm optimization (PSO) and imperialist competition algorithm (ICA). International Journal of Disaster Resilience in the Built Environment, 11(1), pp. 134-151. ISSN 1759-5916

Asgari, S; Afshar, A and Madani, K (2014) Cooperative game theoretic framework for joint resource management in construction. Journal of Construction Engineering and Management, 140(3): 04013066, ISSN 0733-9364

Ashley, D B; Uehara, K and Robinson, B E (1983) Critical decision making during construction. Journal of Construction Engineering and Management, 109(2), pp. 146-162. ISSN 0733-9364

Ashuri, B; Lu, J and Kashani, H (2011) A real options framework to evaluate investments in toll road projects delivered under the two-phase development strategy. Built Environment Project and Asset Management, 1(1), pp. 14-31. ISSN 2044-124X

Ashuri, B and Tavakolan, M (2012) Fuzzy enabled hybrid genetic algorithm-particle swarm optimization approach to solve tcro problems in construction project planning. Journal of Construction Engineering and Management, 138(9), pp. 1065-1074. ISSN 0733-9364

Aslay, S E and Dede, T (2024) Reduce the construction cost of a 7-story RC public building with metaheuristic algorithms. Architectural Engineering and Design Management, 20(2), pp. 214-229. ISSN 1745-2007

Asok, A (2017) Work-life balance of migrant labourers in Kerala with special reference to civil construction sector. PhD thesis, University of Kerala, India.

Assaad, R A (1991) Structured labor markets: The case of the construction sector in Egypt. PhD thesis, Cornell University, USA.

Assaad, R H; El-Adaway, I H; Hastak, M and Lascola Needy, K (2022) The impact of offsite construction on the workforce: Required skillset and prioritization of training needs. Journal of Construction Engineering and Management, 148(7): 04022056, ISSN 0733-9364

Atta, A; Ali, N; Taman, M and Etman, E (2018) Improvement the structural behavior of recycled RC elements using CdO nanoparticles. Construction Innovation, 18(2), pp. 134-151. ISSN 1471-4175

Attarzadeh, M; Chua, D K H; Beer, M and Abbott, E L S (2017) Options-based negotiation management of PPP-BOT infrastructure projects. Construction Management and Economics, 35(11-12), pp. 676-692. ISSN 0144-6193

Augenbroe, G; Castro, D and Ramkrishnan, K (2009) Decision model for energy performance improvements in existing buildings. Journal of Engineering, Design and Technology, 7(1), pp. 21-36. ISSN 1726-0531

Aulich, H T (2013) The role of effective communication in the construction industry: A guide for education and health clients. Construction Economics and Building, 13(4), pp. 92-101. ISSN 2204-9029

Aunwong, P and Hadikusumo, B H W (2025) Digital 2D and 3D modelling for construction safety management in Thai construction projects. International Journal of Construction Management, 25(15), pp. 1778-1790. ISSN 1562-3599

Austin, S A; Baldwin, A N and Steele, J L (2002) Improving building design through integrated planning and control. Engineering, Construction and Architectural Management, 9(3), pp. 249-258. ISSN 0969-9988

Austin, S A; Thorpe, A; Root, D; Thomson, D and Hammond, J (2007) Integrated collaborative design. Journal of Engineering, Design and Technology, 5(1), pp. 7-22. ISSN 1726-0531

Avitts, E (2006) Live the dream: The rhetoric of the furnished model home at the turn of the twenty-first century. PhD thesis, University of Delaware, USA.

Awolusi, I G (2017) Active construction safety leading indicator data collection and evaluation. PhD thesis, University of Alabama, USA.

Awuku, B; Asa, E and Baffoe-Twum, E (2024) Conceptual cost estimation of highway bid unit prices using ordinary kriging. International Journal of Construction Management, 24(3), pp. 351-360. ISSN 1562-3599

Axelsson, P-O (1991) Accident prevention in the construction industry. TaknDr thesis, Kungliga Tekniska Hogskolan, Sweden.

Axon, C J; Bright, S J; Dixon, T J; Janda, K B and Kolokotroni, M (2012) Building communities: Reducing energy use in tenanted commercial property. Building Research & Information, 40(4), pp. 461-472. ISSN 0961-3218

Ayat, M; Ullah, M; Pervez, Z; Lawrence, J; Kang, C W and Ullah, A (2025) Analyzing the differential impact of variables on the success of solicited and unsolicited private participation in infrastructure projects using machine learning techniques. Engineering, Construction and Architectural Management, 32(12), pp. 7909-7937. ISSN 0969-9988

Ayeleso, A O and van Zyl, R R (2016) Photocurrents obtained from a triple planar probe sensor for in situ extreme ultraviolet (euv) radiation measurements on low earth orbiting cubesats. Journal of Engineering, Design and Technology, 14(3), pp. 641-651.

Ayers, G F; Culvenor, J F; Sillitoe, J and Else, D (2013) Meaningful and effective consultation and the construction industry of Victoria, Australia. Construction Management and Economics, 31(6), pp. 542-567. ISSN 1466433X

Ayhan, B U and Tokdemir, O B (2020) Accident analysis for construction safety using latent class clustering and artificial neural networks. Journal of Construction Engineering and Management, 146(3): 04019114, ISSN 0733-9364

Azcarate-Aguerre, J F; Conci, M; Zils, M; Hopkinson, P and Klein, T (2022) Building energy retrofit-as-a-service: A total value of ownership assessment methodology to support whole life-cycle building circularity and decarbonisation. Construction Management and Economics, 40(9), pp. 676-689. ISSN 01446193

Azman, M A; Hon, C K H; Xia, B; Lee, B L and Skitmore, M (2021) Product diversification and large construction firm productivity: The effect of institutional environments in Malaysia. Engineering, Construction and Architectural Management, 28(4), pp. 994-1013. ISSN 0969-9988

Azzouz, A; Copping, A; Shepherd, P and Duncan, A (2016) Using the arup BIM maturity measure to demonstrate BIM implementation in practice. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Azzouz, A; Hill, P and Papadonikolaki, E (2018) Digital innovation in Europe: Regional differences across one international firm. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Baarts, C (2009) Collective individualism: The informal and emergent dynamics of practising safety in a high-risk work environment. Construction Management and Economics, 27(10), pp. 949-957. ISSN 1466433X

Baba, K (1990) Principal nature of management in Japanese construction industry. Journal of Construction Engineering and Management, 116(2), pp. 351-364. ISSN 0733-9364

Baborska-Narozny, M; Bandurski, K and Grudzinska, M (2025) Understanding shading through home-use experience, measurement and modelling. Buildings & Cities, 6(1), pp. 466-489. ISSN 2632-6655

Bachman, L R (2008) Architecture and the four encounters with complexity. Architectural Engineering and Design Management, 4(1), pp. 15-30. ISSN 1745-2007

Baden-Hellard, R (1996) The partnering philosophy: A procurement strategy for satisfaction through a teamwork solution to project quality. Journal of Construction Procurement, 2(1), pp. 41-55. ISSN 1358-9180

Badger, W W and Mulligan, D E (1995) An implementation model of an alliance. Journal of Construction Procurement, 1(1), pp. 21-37. ISSN 1358-9180

Badra, N; Hegazy, H; Mousa, M; Zhang, J; Syed Zakaria, S A; Aboul Haggag, S and Abdul-Rashied, I (2025) Preliminary cost forecasting and optimization for the construction of steel pedestrian bridges in Egypt. Engineering, Construction and Architectural Management, 32(4), pp. 2210-2241. ISSN 0969-9988

Badra, N; Hegazy, H; Zhang, J; Yahia, M; Fathy, M and AboulHaggag, S (2025) Application of fuzzy multi-objective model for crashing the construction of steel structure projects post-pandemic (Covid-19). International Journal of Construction Management, 25(3), pp. 363-374. ISSN 1562-3599

Bae, Juhyeon (2024) Integrating wearable biosensing with social norm to empower construction workers for preventive job site safety. PhD thesis, University of Michigan, USA.

Bagies, A and Fortune, C (2006) Bid/no-bid decision modelling for construction projects. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Bahadur, A V (2014) Policy climates and climate policies: analysing the politics of building resilience to climate change. PhD thesis, University of Sussex, UK.

Bahammou, Y; Kouhila, M; Moussaoui, H; Lamsyehe, H; Tagnamas, Z; Lamharrar, A and Idlimam, A (2022) Evaluation of the influence of ambient air temperature and air velocity on mortar cement durability using a forced convection solar dryer. International Journal of Building Pathology and Adaptation, 40(4), pp. 462-480. ISSN 23984708

Bahram, D. (2025) Briefing: Importance of trust when adopting an intelligent environment. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 179(1), pp. 3-6. ISSN 1751-4304

Bai, L; Xie, X; Sun, Y; Qu, X and Han, X (2025) Assessing project criticality in project portfolio: A vulnerability modeling approach. Engineering, Construction and Architectural Management, 32(5), pp. 2890-2919. ISSN 0969-9988

Bajar, K; Kamat, A; Shanker, S and Barve, A (2024) Blockchain technology: A catalyst for reverse logistics of the automobile industry. Smart and Sustainable Built Environment, 13(1), pp. 133-178. ISSN 2046-6099

Baker, F (2013) Housing and planning regulation: England and Ireland. International Journal of Law in the Built Environment, 5(2), pp. 118-136. ISSN 17561469

Baker, H; Smith, S; Masterton, G and Hewlett, B (2020) Data-led learning: Using natural language processing (NLP) and machine learning to learn from construction site safety failures. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Baker, M; Ali, M and French, E (2021) Leadership diversity and its influence on equality initiatives and performance: Insights for construction management. Journal of Construction Engineering and Management, 147(10): 02147, ISSN 0733-9364

Bakheet, M T (1995) Contractors' risk assessment system. PhD thesis, Georgia Institute of Technology, USA.

Bakhoum, E S and Brown, D C (2012) Developed sustainable scoring system for structural materials evaluation. Journal of Construction Engineering and Management, 138(1), pp. 110-119. ISSN 0733-9364

Bakhtiyari, S; Kalali, A; Taghi Akbari, L and Farahbod, F (2017) The experimental behavior of CFRP-strengthened reinforced concrete slabs with fire protection systems subjected to standard fire exposure. International Journal of Disaster Resilience in the Built Environment, 8(3), pp. 238-250. ISSN 1759-5916

Bakry, I; Moselhi, O and Zayed, T (2016) Optimized scheduling and buffering of repetitive construction projects under uncertainty. Engineering, Construction and Architectural Management, 23(6), pp. 782-800. ISSN 0969-9988

Balamurali, B; Anand, N; Thomas, M and Chin, C (2025) High-strength geopolymer based engineered cementitious composites (ECC) for sustainable and resilient construction. Journal of Engineering, Design and Technology, 23(5), pp. 1751-1769. ISSN 1726-0531

Balatbat, M C A; Lin, C Y and Carmichael, D G (2011) Management efficiency performance of construction businesses: Australian data. Engineering, Construction and Architectural Management, 18(2), pp. 140-158. ISSN 0969-9988

Baldissera, P and Delprete, C (2020) From PBL to innovation: A decennial case-study from an HPV student team. Journal of Engineering, Design and Technology, 18(4), pp. 773-786. ISSN 1726-0531

Ballal, T M A (1999) The use of artificial neural networks for modelling buildability in preliminary structural design. PhD thesis, Loughborough University, UK.

Bamana, F; Lehoux, N and Cloutier, C (2019) Simulation of a construction project: Assessing impact of just-in-time and lean principles. Journal of Construction Engineering and Management, 145(5): 05019005, ISSN 0733-9364

Banerjee, A and Nayaka, R R (2022) A comprehensive overview on BIM-integrated cyber physical system architectures and practices in the architecture, engineering and construction industry. Construction Innovation, 22(4), pp. 727-748. ISSN 1471-4175

Banihashemi S Y, L L (2013) A socio-economic framework for adopting governance mechanisms in large construction projects. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Banks, N A (2006) “The last bastion of discrimination”: The New York city building trades and the struggle over affirmative action, 1961–1976. PhD thesis, Columbia University, USA.

Bansal, V K and Pal, M (2009) Extended GIS for construction engineering by adding direct sunlight visualisations on buildings. Construction Innovation, 9(4), pp. 406-419. ISSN 1471-4175

Bansal, V K and Pal, M (2011) Construction projects scheduling using GIS tools. International Journal of Construction Management, 11(1), pp. 1-18. ISSN 1562-3599

Barbosa, Gino Caldatto (2020) Modern work: Roberto simonsen's construction company. PhD thesis, Universidade de São Paulo, Brazil.

Barbosa, S; Alberto, K C and Piroozfar, P (2025) Natural daylighting through double skin façades: A review. Architectural Engineering and Design Management, 21(2), pp. 231-251. ISSN 1745-2007

Barcia, R M (1985) Construction production planning and optimal control. PhD thesis, University of Waterloo, Canada.

Barnes, L R and Croker, N (2013) The relevance of the ISO 26000 social responsibility issues to the Hong Kong construction industry. Construction Economics and Building, 13(3), pp. 37-50. ISSN 2204-9029

Barnes, W C (2000) Defective workmanship: A transatlantic analysis of construction law and practice. PhD thesis, University of Birmingham, UK.

Barrett, J (2020) Choose your future: A feminist perspective on Construction 4.0 as techno-utopia or digital dystopia. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(4), pp. 153-157. ISSN 17514304

Barrett, J; Goulding, J and Qualter, P (2013) The social life of the novel idea: What did social psychologists ever do for us? Engineering, Construction and Architectural Management, 20(3), pp. 250-266. ISSN 0969-9988

Barrett, M (2009) Forum policy challenges for building stocks. Building Research & Information, 37(2), pp. 201-205. ISSN 0961-3218

Barrett, P S and Barrett, L C (2003) Research as a kaleidoscope on practice. Construction Management and Economics, 21(7), pp. 755-766. ISSN 01446193

Barrett, P S; Sexton, M G and Green, L (1999) Integrated delivery systems for sustainable construction. Building Research & Information, 27(6), pp. 397-404. ISSN 0961-3218

Barros, Mércia Maria Semensato Bottura de (1996) A model to introduce innovative technologies into the building construction. PhD thesis, Universidade de São Paulo, Brazil.

Barrows, M; Clevenger, C M; Abdallah, M and Wu, W (2020) Value of certifications when seeking construction employment. International Journal of Construction Education and Research, 16(1), pp. 61-79. ISSN 1557-8771

Basford, J L (2000) Earned value reporting for the department of energy. PhD thesis, Walden University, USA.

Bashford, H H; Walsh, K D and Sawhney, A (2005) Production system loading-cycle time relationship in residential construction. Journal of Construction Engineering and Management, 131(1), pp. 15-22. ISSN 0733-9364

Bashir, Muhammad Rizwan (2022) Big data management and analytics framework for IoT-enabled smart buildings. PhD thesis, University of Technology Sydney, Australia.

Batouli, M and Joshi, D (2025) Pathways to socially sustainable adaptation: Real-time and context-specific vulnerability assessment in South carolina after hurricane dorian. Journal of Construction Engineering and Management, 151(2): 04024197, ISSN 0733-9364

Bauch, G T (1999) A statistical project control tool for engineering managers. PhD thesis, University of Houston, USA.

Bavi, R (2005) The development of a model design-build specification document for educational facilities construction projects. EdD thesis, Wilmington College (Delaware), USA.

Bayraktar, M E (2006) A decision model to determine the optimal time-cost trade off in highway work zone projects. PhD thesis, Purdue University, USA.

Bayraktar, M E and Hastak, M (2010) Scoring approach to construction bond underwriting. Journal of Construction Engineering and Management, 136(9), pp. 957-967. ISSN 0733-9364

Bearup, W K (1995) An environment to support computer-assisted design review. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Bebelaar, N; Braggaar, R C; Kleijwegt, C M; Meulmeester, R W E; Michailidou, G; Salheb, N; van der Spek, S; Vaissier, N and Verbree, E (2018) Monitoring urban environmental phenomena through a wireless distributed sensor network. Smart and Sustainable Built Environment, 7(1), pp. 68-79. ISSN 2046-6099

Beemsterboer, S and Koch, C (2016) Building information standards: Big data technologies prevented from becoming big in building. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Belayutham, S; Ibrahim, K I and Hussain, A (2019) Shaping the future of prevention through design (PTD) practice in the Malaysian construction industry. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Beliveau, Y J (1984) A cost control model for on-site work activities for construction (estimating, cost-codes, forms). PhD thesis, Purdue University, USA.

Beliveau, Y J; Dixit, S S; Dal, T and Morad, A A (1993) Multitask motion planning for material handling in construction. Journal of Construction Engineering and Management, 119(1), pp. 180-191. ISSN 0733-9364

Bell, L C and McCullouch, B G (1988) Bar code applications in construction. Journal of Construction Engineering and Management, 114(2), pp. 263-278. ISSN 0733-9364

Bellifa, S and Boumechra, N (2019) Effects of calcium leaching on the physical and mechanical properties of aerial lime-cement mortars. Journal of Engineering, Design and Technology, 17(3), pp. 649-666. ISSN 1726-0531

Bemelmans, Jeroen (2012) Buyer-supplier relationship management in the construction industry. PhD thesis, University of Twente, Netherlands.

Benhart, B L and Shaurette, M (2014) Establishing new graduate competencies: Purdue University's construction management curriculum restructuring. International Journal of Construction Education and Research, 10(1), pp. 19-38. ISSN 1557-8771

Benjaoran, V and Bhokha, S (2009) Enhancing visualization of 4D CAD model compared to conventional methods. Engineering, Construction and Architectural Management, 16(4), pp. 392-408. ISSN 0969-9988

Bennett, J and Ormerod, R N (1984) Simulation applied to construction projects. Construction Management and Economics, 2(3), pp. 225-263. ISSN 01446193

Benster, N A (1970) A study and assessment of water penetration and rapid deterioration in existing dwellings-developed as a guide to future building design, production and maintenance management. PhD thesis, University of Manchester Institute of Science and Technology, UK.

Bentivegna, V; Curwell, S; Deakin, M; Lombardi, P; Mitchell, G and Nijkamp, P (2002) A vision and methodology for integrated sustainable urban development: Bequest. Building Research & Information, 30(2), pp. 83-94. ISSN 0961-3218

Bentley, D (2000) Control and emergence: The paradox of construction management. PhD thesis, University of Hertfordshire, UK.

Bentlin, F (2023) The urban expansion of Berlin, 1862–1900: Hobrecht's plan. Buildings & Cities, 4(1), pp. 36-54. ISSN 2632-6655

Beran, V and Dlask, P (2007) Nonlinear optimisation and rational cash flow. Engineering, Construction and Architectural Management, 14(3), pp. 277-292. ISSN 0969-9988

Berends, T C (2007) Contracting economics of large engineering and construction projects. PhD thesis, Delft University of Technology, Netherlands.

Berenyi, R O (2001) The conservation of buildings: A philosophical examination. PhD thesis, University of Salford, UK.

Bergsdal, H; Brattebø, H; Bohne, R A and Müller, D B (2007) Dynamic material flow analysis for norway's dwelling stock. Building Research & Information, 35(5), pp. 557-570. ISSN 0961-3218

Bernold, L E and Treseler, J F (1991) Vendor analysis for best buy in construction. Journal of Construction Engineering and Management, 117(4), pp. 645-658. ISSN 0733-9364

Berryman, C W; Fischer, B; Wentz, T and Nobe, M D (2004) Distance education with internet 2 audio/video technology. International Journal of Construction Education and Research, 1(1), pp. 45-60. ISSN 1557-8771

Bertero, R D (2014) Great 2010 American earthquakes: Lessons for seismic design and construction. Journal of Construction Engineering and Management, 140(4): B4013003, ISSN 0733-9364

Bertolin, C and Berto, F (2024) Sustainable management of heritage buildings in long-term perspective (symbol): Current knowledge and further research needs. International Journal of Building Pathology and Adaptation, 42(1), pp. 1-17. ISSN 23984708

Bertolin, C and Sesana, E (2024) Natural hazards affecting cultural heritage: Assessment of flood and landslide risk for the 28 existing Norwegian stave churches. International Journal of Building Pathology and Adaptation, 42(1), pp. 48-91. ISSN 23984708

Besenyöi, Z (2022) Towards a BIM-supported facility management knowledge management system for energy efficient building operations by rule-based code compliance checking. PhD thesis, Technische Universitaet Berlin, Germany.

Besser, D (2006) The experience of women in construction management: A hermeneutic phenomenological study. PhD thesis, University of Minnesota, USA.

Best, Eric A (2008) The development and testing of a purchasing power parity method for comparing construction costs internationally. PhD thesis, University of Technology Sydney, Australia.

Betts, M; Cher, L; Mathur, K and Ofori, G (1991) Strategies for the construction sector in the information technology era. Construction Management and Economics, 9(6), pp. 509-528. ISSN 01446193

Betts, M and Ofori, G (1992) Strategic planning for competitive advantage in construction. Construction Management and Economics, 10(6), pp. 511-532. ISSN 01446193

Betts, M and Ofori, G (1994) Strategic planning for competitive advantage in construction: The institutions. Construction Management and Economics, 12(3), pp. 203-217. ISSN 01446193

Beynon, K S (2005) Dispute resolution and access to justice, with particular reference to the construction industry in the United Kingdom. PhD thesis, Swansea University, UK.

Bhardwaj, A and Sharma, R K (2020) Effect of industrial wastes and lime on strength characteristics of clayey soil. Journal of Engineering, Design and Technology, 18(6), pp. 1749-1772. ISSN 1726-0531

Bhasha, A V and Reddy, B D V (2022) A multi-objective opposition-based barnacles mating optimization for image super resolution using hyper-spectral images. Journal of Engineering, Design and Technology, 20(6), pp. 1538-1564. ISSN 1726-0531

Bhat, A; Gupta, V; Aulakh, S S and Elsen, R S (2023) Generative design and analysis of a double-wishbone suspension assembly: A methodology for developing constraint oriented solutions for optimum material distribution. Journal of Engineering, Design and Technology, 21(3), pp. 927-942. ISSN 1726-0531

Bhavya Swathi, I; Suvarna Raju, L and Ramulu, P J (2020) Surface development by reinforcing nano-composites during friction stir processing: A review. Journal of Engineering, Design and Technology, 18(3), pp. 653-687. ISSN 1726-0531

Bhutto, K; Thorpe, T and Stephenson, P (2005) E-commerce and the construction industry. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Bibby, L (2003) Improving design management techniques in construction. EngD thesis, Loughborough University, UK.

Bibby, L; Bouchlaghem, D and Austin, S (2003) Design management in practice: Testing a training initiative to deliver tools and learning. Construction Innovation, 3(4), pp. 217-229. ISSN 1471-4175

Bidarianzadeh, G R and Fortune, C J (2002) Lean thinking and the delivery of sustainable construction projects. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Biesenthal, Christopher (2013) Projects as arenas for pragmatic management practices : Improvisation, capabilities and change. PhD thesis, University of Technology Sydney, Australia.

Bigelow, B F; Bilbo, D; Mathew, M; Ritter, L and Elliott, J W (2015) Identifying the most effective factors in attracting female undergraduate students to construction management. International Journal of Construction Education and Research, 11(3), pp. 179-195. ISSN 1557-8771

Bigelow, B F; Zarate, V; Soto, J; Arenas, J and Perrenoud, A (2019) Attracting and retaining tradespeople, an evaluation of influencers on construction workers in two different trades in Texas. International Journal of Construction Education and Research, 15(3), pp. 163-178. ISSN 1557-8771

Biggs, H and Williamson, A R (2012) Safety impacts of alcohol and other drugs in construction: Development of an industry policy and cultural change management program. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bijleveld F R, D e A G (2013) Method-based learning: A case in the asphalt construction industry. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Bina, K and Moghadas, N (2021) BIM-abm simulation for emergency evacuation from conference hall, considering gender segregation and architectural design. Architectural Engineering and Design Management, 17(5-6), pp. 361-375. ISSN 1745-2007

Birgonul, M T; Dikmen, I and Bektas, S (2015) Integrated approach to overcome shortcomings in current delay analysis practices. Journal of Construction Engineering and Management, 141(4): 04014088, ISSN 0733-9364

Birkeland, J L (2014) Positive development and assessment. Smart and Sustainable Built Environment, 3(1), pp. 4-22. ISSN 2046-6099

Birnie, J (1998) Risk allocation to the construction firm within a private finance initiative (PFI) project. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Birnie, J (1999) Private Finance Initiative (PFI): UK construction industry response. Journal of Construction Procurement, 5(1), pp. 5-14. ISSN 1358-9180

Bishop, D (1994) The professionals' view of the Health and Safety Commission's draft Construction (Design and Management) Regulations. Construction Management and Economics, 12(4), pp. 365-372. ISSN 01446193

Biswas, A (2019) Exploring Indian post-disaster temporary housing strategy through a comparative review. International Journal of Disaster Resilience in the Built Environment, 10(1), pp. 14-35. ISSN 1759-5916

Biziorek, S; De Marco, A and Castelblanco, G (2023) Public-private partnership national programs through the portfolio perspective: A system dynamics model of the UK PFI/PF2 programs. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Bjornstad, F A (1991) "A revolution in ideas and methods": The construction industry and socioeconomic planning in the United States, 1915-1933. PhD thesis, University of Iowa, USA.

Björk, B (2002) A formalised model of the information and materials handling activities in the construction process. Construction Innovation, 2(3), pp. 133-149. ISSN 1471-4175

Black, Warren (2023) Investigating a complex systems theory approach to controlling risk within complex projects. PhD thesis, Queensland University of Technology, Australia.

Blackman, I Q and Picken, D H (2010) Height and construction costs of residential high-rise buildings in Shanghai. Journal of Construction Engineering and Management, 136(11), pp. 1169-1180. ISSN 0733-9364

Blanchard, F L (1992) Construction industry organization, labor relations and productivity. PhD thesis, Massachusetts Institute of Technology, USA.

Blayse, A M and Manley, K (2004) Key influences on construction innovation. Construction Innovation, 4(3), pp. 143-154. ISSN 1471-4175

Blismas, N G; Sher, W and Thorpe, A (1998) National and global multi-site projects. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Bloechle, Robert A (1969) Equal employment opportunity in the construction industry. PhD thesis, Creighton University, UK.

Blomgren, S (2003) Changes to building research funding in Sweden. Building Research & Information, 31(6), pp. 474-478. ISSN 0961-3218

Blyth, K; Lewis, J and Kaka, A (2004) Developing a framework for a standardized works programme for building projects. Construction Innovation, 4(4), pp. 193-210. ISSN 1471-4175

Boehm, S and Kopec, D (2016) Interior design as a post-disaster team partner. International Journal of Disaster Resilience in the Built Environment, 7(3), pp. 276-289. ISSN 1759-5916

Boes, H and Dorée, A (2008) Public procurement of local authorities in the Netherlands: A case of breaking tradition for a more strategic approach? In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Boes, H; Dorée, A and Veen, B v d (2002) First evaluation of new scheme for design-construct procurement in the Netherlands. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Boes H, D A (2013) Public procurement at local level in the Netherlands: Towards a better client-contractor cooperation in a competitive environment. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Bogusz, B (2013) Regulating public/private interests in town and village greens. International Journal of Law in the Built Environment, 5(1), pp. 21-39. ISSN 17561469

Bohne, R A (2005) Eco-efficiency and performance strategies in construction and demolition waste recycling systems. PhD thesis, Norges Teknisk-Naturvitenskapelige Universitet, Norway.

Bolier, I (2025) From tinkering to transitioning: Cultivating innovation within public agencies operating in the construction industry. PhD thesis, Delft University of Technology, Netherlands.

Bon, R and Hutchinson, K (2000) Sustainable construction: Some economic challenges. Building Research & Information, 28(5-6), pp. 310-314. ISSN 0961-3218

Bondin, I (2022) Inter-organisational relationships in construction projects: an analysis of inter-organisational relationships over time through the theoretical lens of trust and power. PhD thesis, Loughborough University, UK.

Bonilla, M; Castelblanco, G and Rasdorf, W (2026) The paradox of project performance: The role of procurement, contextual, and contractor-related factors. Journal of Construction Engineering and Management, 152(6): 04026062, ISSN 0733-9364

Bonnal, P; Gourc, D; Hameri, A P and Lacoste, G (2005) A linear-discrete scheduling model for the resource-constrained project scheduling problem. Construction Management and Economics, 23(8), pp. 797-814. ISSN 01446193

Booth, Peter Charles (2023) Digitally integrated material practice: Computational methods of engaging non-standardised plantation hardwood in architecture. PhD thesis, University of Technology Sydney, Australia.

Bordass, B (2020) Metrics for energy performance in operation: The fallacy of single indicators. Buildings & Cities, 1(1), pp. 260-276. ISSN 2632-6655

Borer, J (2020) Object oriented design of safety critical programmable equipment systems. Journal of Engineering, Design and Technology, 18(5), pp. 1081-1089. ISSN 1726-0531

Borg, L and Lind, H (2014) Framework for structuring procurement contracts. Construction Economics and Building, 14(4), pp. 71-84. ISSN 2204-9029

Bornstein, L; Lizarralde, G; Gould, K A and Davidson, C (2013) Framing responses to post-earthquake Haiti: How representations of disasters, reconstruction and human settlements shape resilience. International Journal of Disaster Resilience in the Built Environment, 4(1), pp. 43-57. ISSN 1759-5916

Borthwick, F; Galloway, R L and Seden, R (1999) The impact of the european construction products directive on uk construction product manufacturers. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Bos-de Vos, M and Volker, L (2017) Constructing business models around identity: Tensions in architectural firms. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Bosché, F; Turkan, Y; Haas, C T and Haas, R (2010) Fusing 4D modelling and laser scanning for construction schedule control. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Bosher, L; Dainty, A; Carrillo, P; Glass, J and Price, A (2007) Towards a protocol for built-in resilience to disasters. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Bosher, L; Dainty, A; Carrillo, P; Glass, J and Price, A (2009) Decision support for integrating disaster risk management strategies into construction practice. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Bosserman, B E and Ford, M E (1984) Development of computerized specifications. Journal of Construction Engineering and Management, 110(3), pp. 375-384. ISSN 0733-9364

Bossink, B (2004) Co-innovation research in construction. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Bossink, B A G (2002) A Dutch public-private strategy for innovation in sustainable construction. Construction Management and Economics, 20(7), pp. 633-642. ISSN 01446193

Bossink, B A G (2004) Managing drivers of innovation in construction networks. Journal of Construction Engineering and Management, 130(3), pp. 337-345. ISSN 0733-9364

Botha, P S and Scheepbouwer, E (2015) Christchurch rebuild, New Zealand: Alliancing with a difference. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 168(3), pp. 121-129. ISSN 17514304

Bou Hatoum, Makram Bou (2023) Value propositions, adoption factors, and implementation considerations: Building a path towards construction innovation. PhD thesis, University of Kentucky, USA.

Boudeau, C (2013) Design team meetings and the coordination of expertise: The roof garden of a hospital. Construction Management and Economics, 31(1), pp. 78-89. ISSN 1466433X

Boukendour, S (2007) Preventing post-contractual opportunism by an option to switch from one contract to another. Construction Management and Economics, 25(7), pp. 723-727. ISSN 1466433X

Bourgeois, D; Reinhart, C F and Ward, G (2008) Standard daylight coefficient model for dynamic daylighting simulations. Building Research & Information, 36(1), pp. 68-82. ISSN 0961-3218

Boussabaine, A H and Elhag, T (1999) Applying fuzzy techniques to cash flow analysis. Construction Management and Economics, 17(6), pp. 745-755. ISSN 01446193

Boutilier, R G and Zdziarski, M (2017) Managing stakeholder networks for a social license to build. Construction Management and Economics, 35(8-9), pp. 498-513. ISSN 01446193

Bouwer, P (2022) A critical appraisal of South Africa's political approach to competition regulation. LLD thesis, University of Pretoria, South Africa.

Bowen, P; Edwards, P and Cattell, K (2015) Perceptions of the relative importance of job control and support factors, as moderators of workplace stress, among South African construction professionals: Preliminary findings. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Bowen, P; Govender, R and Edwards, P (2017) Condom use by South African construction workers. Construction Management and Economics, 35(7), pp. 432-444. ISSN 01446193

Bowers, H J (2000) Public policy: Affirmative action, social equity, and employment patterns in Michigan's construction industry, 1966-1997. DPA thesis, Western Michigan University, USA.

Bowers, R (2019) Gendered economies of extraction: seeking permanence amidst the rubble of Bengaluru's construction industry. PhD thesis, London School of Economics and Political Science, UK.

Boyd, D (2013) Using events to connect thinking and doing in knowledge management. Construction Management and Economics, 31(11), pp. 1144-1159. ISSN 1466433X

Boyd, D and Danks, S (2000) An analysis of 'the architectural practice' in the construction industry. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Boyd, D and Foss, P (1997) Developing intimacy in construction industry groups. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Boyd, D and Wild, A (1999) Construction projects as organization development. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Boyd, N J P (2016) From bicycles to buildings: a SCOT analysis of project level adoption of BIPV. PhD thesis, University of Reading, UK.

Boyd, P; Larsen, G D and Schweber, L (2014) Perspectives on the specification of building integrated photovoltaic (BIPV) technology in construction projects. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Boyd, P; Larsen, G D and Schweber, L (2015) The co-development of technology and new buildings: Incorporating building integrated photovoltaics. Construction Management and Economics, 33(5-6), pp. 349-360. ISSN 01446193

Boyd, P and Schweber, L (2018) Unintended consequences: Institutional artefacts, closure mechanisms and the performance gap. Building Research & Information, 46(1), pp. 10-22. ISSN 0961-3218

Bradford, C W (2017) The impact of the systematic incorporation of tolerances on gypsum board installation. PhD thesis, Indiana State University, USA.

Bradley, A; Li, H; Qin, H; Xi, W; Peel, D and Nisbet, N (2022) Requirements and process analysis for ports and waterways openbim ISO standards development. Construction Innovation, 22(4), pp. 705-726. ISSN 1471-4175

Bradley, P E (2019) Methodology for the sequence analysis of building stocks. Building Research & Information, 47(2), pp. 141-155. ISSN 0961-3218

Brady, T; Davies, A and Gann, D (2005) Can integrated solutions business models work in construction? Building Research & Information, 33(6), pp. 571-579. ISSN 0961-3218

Brager, G; Zhang, H and Arens, E (2015) Evolving opportunities for providing thermal comfort. Building Research & Information, 43(3), pp. 274-287. ISSN 0961-3218

Braimah, N; Ndekugri, I and Gameson, R (2007) A systematic methodology for analysing disruption claims. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Branche, C M (1988) An assessment of conditional risks for severe occupational traumatic injury during falls from elevations at work among North Carolina construction workers. PhD thesis, University of North Carolina at Chapel Hill, USA.

Branco Pedro, J; Meijer, F and Visscher, H (2009) The Portuguese building regulation system: A critical review. International Journal of Law in the Built Environment, 1(2), pp. 156-171. ISSN 1756-1450

Brand, M C and Davenport, P (2011) Proposal for a "dual scheme" model of statutory adjudication for the Australian building and construction industry. International Journal of Law in the Built Environment, 3(3), pp. 252-268. ISSN 1756-1450

Brand, M C and Davenport, P (2012) Adjudication in Australia: An analysis of the amendments introduced by the building and construction industry Security of Payment Amendment Act 2010 (NSW). International Journal of Law in the Built Environment, 4(3), pp. 189-202. ISSN 1756-1469

Brandalise, F M P; Formoso, C T and Viana, D D (2022) Development of a typology for understanding visual management concepts and their relationships. Journal of Construction Engineering and Management, 148(7): 04022041, ISSN 0733-9364

Brandon, P S and Loforte Ribeiro, F (1997) The assessment of applications for the house renovation grant system (hrgs): A multistrategy knowledge-based framework. Engineering, Construction and Architectural Management, 4(1), pp. 41-57. ISSN 0969-9988

Brandon, P S and Ribeiro, F L (1998) A knowledge-based system for assessing applications for house renovation grants. Construction Management and Economics, 16(1), pp. 57-69. ISSN 01446193

Brauner, M (2020) Developing an optimized sustainability assessment tool for building information modelling (BIM) systems: incorporation of hygrothermal modelling into BIM. PhD thesis, Auckland University of Technology, New Zealand.

Bremer, W and Kok, K (2000) The Dutch construction industry: A combination of competition and corporatism. Building Research & Information, 28(2), pp. 98-108. ISSN 0961-3218

Brennan, M C E (2014) Sustainable construction in the 21st century: An educational perspective to shifting the paradigm. PhD thesis, Liverpool John Moores University, UK.

Bresnen, M (2009) Living the dream? Understanding partnering as emergent practice. Construction Management and Economics, 27(10), pp. 923-933. ISSN 1466433X

Bresnen, M (2013) Advancing a new professionalism: Professionalization, practice and institutionalization. Building Research & Information, 41(6), pp. 735-741. ISSN 0961-3218

Bresnen, M and Marshall, N (2000) Partnering in construction: A critical review of issues, problems and dilemmas. Construction Management and Economics, 18(2), pp. 229-237. ISSN 01446193

Bresnen, M and Marshall, N (2001) Understanding the diffusion and application of new management ideas in construction. Engineering, Construction and Architectural Management, 8(5-6), pp. 335-345. ISSN 0969-9988

Bresnen, M and Swan, J (2002) Understanding the implementation of new management initiatives in the construction firm. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Bresnen, M J; Ford, J R; Bryman, A E; Keil, E T; Beardsworth, A D and Wray, K (1986) Labour recruitment strategies and selection practices on construction sites. Construction Management and Economics, 4(1), pp. 37-55. ISSN 01446193

Bressan, Nicolò Maria (2024) VR as design management tool. PhD thesis, Università Iuav di Venezia, Italy.

Brett, R; Dainty, A R J and Fernie, S (2024) Direct employment of construction workers: Skill and productivity in site practice. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Brett, R; Thomson, D and Dainty, A (2022) Exploring craft in construction with short-term ethnography: Reflections on a researcher's prior insight. Construction Management and Economics, 40(5), pp. 359-373. ISSN 01446193

Brewer, G; Gajendran, T and Le Goff, R (2012) Contextualizing innovation in construction firms in regional areas. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bridge, A J and Tisdell, C (2004) The determinants of the vertical boundaries of the construction firm. Construction Management and Economics, 22(8), pp. 807-825. ISSN 01446193

Bridge, C and Carnemolla, P (2014) An enabling BIM block library: An online repository to facilitate social inclusion in Australia. Construction Innovation, 14(4), pp. 477-492. ISSN 1471-4175

Bridgeman, J; Murdock, A; Maple, P; Townley, C and Graham, J (2015) Putting a value on young people's journey into construction: Introducing SROI at construction youth trust. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Bright, K (1992) Computer assisted teaching system for the diagnosis of building defects. Construction Management and Economics, 10(3), pp. 203-226. ISSN 01446193

Bright, S (2010) Carbon reduction and commercial leases in the UK. International Journal of Law in the Built Environment, 2(3), pp. 218-231. ISSN 1756-1450

Briscoe, G (1982) Recent trends in the construction occupations. Construction Papers, 1(3), pp. 55-63. ISSN 0144-8587

Briscoe, G H; Dainty, A R J and Millett, S J (1999) The likely impact of the tax system on self-employment in the british construction industry. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Brito, Luiz Antonio Perrone Ferreira de (2006) Corrections in the determination of the sound power level obtained through intensimetry technique. PhD thesis, Universidade Estadual de Campinas, Brazil.

Britton, P and Bailey, J (2011) New homes and consumer rights: England and Australia compared. International Journal of Law in the Built Environment, 3(3), pp. 269-295. ISSN 1756-1450

Broadhurst, S J (2000) Non-man-entry sewer renovation robot characteristics. PhD thesis, Sheffield Hallam University, UK.

Brocklesby, M (1999) The environmental impact of frame materials: an assessment of the embodied impacts for building frames in the UK construction industry. PhD thesis, University of Sheffield, UK.

Brockman, T M (2008) Personality factors influencing Bemidji State University industrial technology majors making heavy industrial construction career choices. PhD thesis, University of North Dakota, USA.

Broemser, G M (1968) Competitive bidding in the construction industry. PhD thesis, Stanford University, USA.

Bromilow, F J and Pawsey, M R (1987) Life cycle cost of university buildings. Construction Management and Economics, 5(4), ISSN 01446193

Brooks, T and Gunning, J (2022) Walking a fine line: Examining the position of the construction quality auditor through the lens of financial audit literature. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Brown, D C (2003) Novel method of excavation. Journal of Construction Engineering and Management, 129(2), pp. 222-225. ISSN 0733-9364

Brown, L A (2016) The contaminated land regime and austerity. International Journal of Law in the Built Environment, 8(3), pp. 210-225. ISSN 1756-1450

Brown, M M (1995) The architecture of steel: Site planning and building type in the nineteenth-century American Bessemer steel industry. PhD thesis, University of Pittsburgh, USA.

Brown, R (2009) Legal incoherence and the extra-constitutional law of regulatory takings: The Canadian experience. International Journal of Law in the Built Environment, 1(3), pp. 179-193. ISSN 1756-1450

Brown, V (2004) Making home: A study of recent self-build projects in the UK. PhD thesis, De Montfort University, UK.

Bruni, M (1981) Business cycles and seasonality in the Italian construction sector. PhD thesis, University of California, Berkeley, USA.

Brunklaus, B; Thormark, C and Baumann, H (2010) Illustrating limitations of energy studies of buildings with LCA and actor analysis. Building Research & Information, 38(3), pp. 265-279. ISSN 0961-3218

Brunso, T P and Siddiqi, K M (2003) Using benchmarks and metrics to evaluate project delivery of environmental restoration programs. Journal of Construction Engineering and Management, 129(2), pp. 119-130. ISSN 0733-9364

Bryde, M B D and Fearon, D (2011) A model of stakeholder management strategies for sustainable construction. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Bröchner, J (1990) Impacts of information technology on the structure of construction. Construction Management and Economics, 8(2), pp. 205-218. ISSN 01446193

Bröchner, J; Josephson, P E and Kadefors, A (2002) Swedish construction culture, quality management and collaborative practice. Building Research & Information, 30(6), pp. 392-400. ISSN 0961-3218

Bröchner, J and Sjöström, C (2003) Quality and coordination: Internationalizing Swedish building research. Building Research & Information, 31(6), pp. 479-484. ISSN 0961-3218

Bu, Guoping (2013) Development of an integrated deterioration method for long-term bridge performance prediction. PhD thesis, Griffith University, Australia.

Bubshait, A A and Cunningham, M J (1998) Comparison of delay analysis methodologies. Journal of Construction Engineering and Management, 124(4), pp. 315-322. ISSN 0733-9364

Bubshait, A A; Farooq, G; Jannadi, M O and Assaf, S A (1999) Quality practices in design organizations. Construction Management and Economics, 17(6), pp. 799-809. ISSN 01446193

Buckingham, P (2007) International process plant contracts for use on other performance-based projects. Construction Management and Economics, 25(7), pp. 709-713. ISSN 1466433X

Bueno, C; Pereira, L M and Fabricio, M M (2018) Life cycle assessment and environmental-based choices at the early design stages: An application using building information modelling. Architectural Engineering and Design Management, 14(5), pp. 332-346. ISSN 1745-2007

Buertey, J T; Dadadzogbor, E and Atsrim, F (2021) Procurement path influencing factors in Ghana: Managing the challenge of cultural shift. International Journal of Construction Management, 21(1), pp. 78-92. ISSN 1562-3599

Bull, R and Janda, K B (2018) Beyond feedback: Introducing the 'engagement gap' in organizational energy management. Building Research & Information, 46(3), pp. 300-315. ISSN 0961-3218

Bulut, M B; Wilkinson, S; Khan, A; Jin, X H and Lee, C L (2022) Thermal performance of retrofitted secondary glazed windows in residential buildings: two cases from Australia. Smart and Sustainable Built Environment, 11(4), pp. 1182-1192. ISSN 2046-6099

Burbridge, A and Troutbeck, R (2017) Zero roadworker harm: Ethical and legal challenges. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(2), pp. 77-84. ISSN 17514304

Burfoot, M; Naismith, N; GhaffarianHoseini, A and Ghaffarianhoseini, A (2023) Intelligent passive room acoustic technology to satisfy acoustic design standards in classrooms. Smart and Sustainable Built Environment, 12(5), pp. 1031-1055. ISSN 2046-6099

Burgett, J M; Perrenoud, A and Smith, J P (2018) Identification and prioritization of critical subject matter within mechanical systems curriculum in construction management education. International Journal of Construction Education and Research, 14(4), pp. 295-312. ISSN 1557-8771

Burleson, R C; Haas, C T; Tucker, R L and Stanley, A (1998) Multiskilled labor utilization strategies in construction. Journal of Construction Engineering and Management, 124(6), pp. 480-489. ISSN 0733-9364

Burr, K L and Jones, C B (2010) The role of the architect: Changes of the past, practices of the present, and indications of the future. International Journal of Construction Education and Research, 6(2), pp. 122-138. ISSN 1557-8771

Burrows, B G and Seymour, D E (1983) The evaluation of change in the construction industry. Construction Management and Economics, 1(3), pp. 199-215. ISSN 01446193

Burrus, R T; Dumas, C F and Graham, J E (2011) Hurricane risk and coastal property owner choices. International Journal of Disaster Resilience in the Built Environment, 2(2), pp. 118-138. ISSN 1759-5916

Burt, R (2024) The role of the colleges of advanced technology in the development of construction education. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Burton, C A; Ryan, C; Rismanchi, B and Candy, S (2020) Urban shared energy systems and behaviour change: simulating a common pooled resource problem. Smart and Sustainable Built Environment, 9(1), pp. 17-26. ISSN 2046-6099

Buser, M and Koch, C (2012) Women at top level management at contractors in Denmark and Norway. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Buser M, K C (2013) Swedish poverty: An oxymoron? Taking issue with social sustainability in urban renewal. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Butler, L J and Bright, G (2010) Control strategy for a mobile self-balancing materials handling platform. Journal of Engineering, Design and Technology, 8(1), pp. 6-27. ISSN 1726-0531

Bygballe, L E; Ingemansson Havenvid, M; Hughes, W P; Orstavik, F and Torvatn, T (2015) The significance of diverse economic logics for innovation in the construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Byrne, J; Clarke, L and Van Der Meer, M (2005) Gender and ethnic minority exclusion from skilled occupations in construction: A Western European comparison. Construction Management and Economics, 23(10), pp. 1025-1034. ISSN 01446193

Büchmann-Slorup, R (2014) Applying critical chain buffer management theory in location-based management. Construction Management and Economics, 32(6), pp. 506-519. ISSN 01446193

Caerteling, Jasper (2008) Technology development in road construction: How government roles affect project performance. PhD thesis, University of Twente, Netherlands.

Cahill, D (2000) Utilising information in architectural design drawings. PhD thesis, Heriot-Watt University, UK.

Cai, W.; Hua, D.; Li, S.; Xue, S. and Xu, Z. (2026) 3D reconstruction of building interiors based on scan-to-BIM and generative design for as-built building. Engineering, Construction and Architectural Management, 33(3), pp. 1959-1979. ISSN 0969-9988

Cai, H; Rahman, A; Su, X and Zhang, H (2014) A GIS-microscopic simulation approach for optimizing road barrier placement and configuration in university campus emergency evacuation. International Journal of Disaster Resilience in the Built Environment, 5(4), pp. 362-379. ISSN 1759-5916

Cai, J (2020) Data-driven approach to holistic situational awareness in construction site safety management. PhD thesis, Purdue University, USA.

Cai, Q Y; Ng, F F; Chen, H and Ding, Z K (2004) A framework for intelligent change management in the construction process. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Cajzek, R and Klanšek, U (2019) Cost optimization of project schedules under constrained resources and alternative production processes by mixed-integer nonlinear programming. Engineering, Construction and Architectural Management, 26(10), pp. 2474-2508. ISSN 0969-9988

Caldas, C H; Gibson Jr, G E; Weerasooriya, R and Yohe, A M (2009) Identification of effective management practices and technologies for lessons learned programs in the construction industry. Journal of Construction Engineering and Management, 135(6), pp. 531-539. ISSN 0733-9364

Caldas, C H S (2003) Integration of project documents in model-based information systems. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Callaghan, N; Avery, T and Mulville, M (2017) Smart motorway' innovation for achieving greater safety and hard shoulder management. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Campagnac, E (2000) The contracting system in the French construction industry: Actors and institutions. Building Research & Information, 28(2), pp. 131-140. ISSN 0961-3218

Campbell, J M and Smith, S D (2007) Safety, hazard and risk identification and management in infrastructure management: A project overview. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Campo, S (2002) Asymmetry and risk aversion in first -price sealed bid auctions: Identification, estimation, and applications. PhD thesis, University of Southern California, USA.

Campos, C R (2023) Simplified Matlab calculation tool for LCA optimization of domestic buildings. PhD thesis, University of Strathclyde, UK.

Candaş, A B (2022) Multipurpose semantic analysis of construction text documentation. PhD thesis, Middle East Technical University, Turkey.

Candaş, A B and Tokdemir, O B (2022) Automated identification of vagueness in the FIDIC silver book conditions of contract. Journal of Construction Engineering and Management, 148(4): 04022007, ISSN 0733-9364

Candaş, A B and Tokdemir, O B (2022) Automating coordination efforts for reviewing construction contracts with multilabel text classification. Journal of Construction Engineering and Management, 148(6): 04022027, ISSN 0733-9364

Cao, X.; Hong, C.; Xu, Y.; Lee, C. Y. and Skitmore, M. (2026) Effects of abusive supervision on construction industry workers' work efficiency: A study based on EEG. Journal of Construction Engineering and Management, 152(6): 04026073, ISSN 0733-9364

Cao, Y.; Zhong, N.; Li, M. and Yang, A. (2026) Analysis and research of shougang park industrial heritage redevelopment space based on residents' spatial behaviour. Building Research & Information, 54(5), pp. 535-551. ISSN 0961-3218

Cao, J; Said, H; Savov, A and Hall, D (2024) Graph-based evolutionary search for optimal hybrid modularization of building construction projects. Journal of Construction Engineering and Management, 150(8): 04024098, ISSN 0733-9364

Cao, W (2019) Data interpretation for infrastructure system diagnosis and prognosis based on model falsification. PhD thesis, National University of Singapore, Singapore.

Capper, P N (1995) The adjudicator under NEC 2nd edition: A new approach to disputes. Engineering, Construction and Architectural Management, 2(4), pp. 317-326. ISSN 0969-9988

Carbonara, N; Costantino, N and Pellegrino, R (2015) A model for designing the tendering process in public-private partnerships. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 168(3), pp. 146-156. ISSN 17514304

Carbonara, N; Costantino, N and Pellegrino, R (2016) A transaction costs-based model to choose PPP procurement procedures. Engineering, Construction and Architectural Management, 23(4), pp. 491-510. ISSN 0969-9988

Carbonara, N and Pellegrino, R (2018) Revenue guarantee in public-private partnerships: A win–win model. Construction Management and Economics, 36(10), pp. 584-598. ISSN 01446193

Cariño, J M N and Garciano, L E O (2020) Proposed evacuation safety index (ESI) for school buildings. International Journal of Disaster Resilience in the Built Environment, 11(3), pp. 309-328. ISSN 1759-5916

Carley, L A; Haas, C T; Borcherding, J D and Goodrum, P M (2003) Experiences with multiskilling among non-union craft workers in us industrial construction projects. Engineering, Construction and Architectural Management, 10(6), pp. 374-381. ISSN 0969-9988

Carmichael, D G and Karantonis, J P (2015) Construction contracts with conversion capability: A way forward. Journal of Financial Management of Property and Construction, 20(2), pp. 132-146. ISSN 1366-4387

Carmichael, S (2002) The development of implementation processes for partnering in construction. PhD thesis, University of Salford, UK.

Carpenter, W J (2004) Design and construction in architectural education: 1963-2003. PhD thesis, Birmingham City University, UK.

Carr, R I (1997) Engineering and construction management: Leadership and opportunity. Journal of Construction Engineering and Management, 123(3), pp. 292-296. ISSN 0733-9364

Carr, R I and Maloney, W F (1983) Basic research needs in construction engineering. Journal of Construction Engineering and Management, 109(2), pp. 181-189. ISSN 0733-9364

Carreira, P; Castelo, T; Gomes, C C; Ferreira, A; Ribeiro, C and Costa, A A (2018) Virtual reality as integration environments for facilities management: Application and users' perceptions. Engineering, Construction and Architectural Management, 25(1), pp. 90-112. ISSN 0969-9988

Carreira, P; Castelo, T; Gomes, C C; Ferreira, A; Ribeiro, C and Costa, A A (2018) Virtual reality as integration environments for facilities management: Application and users perception. Engineering, Construction and Architectural Management, 25(1), pp. 90-112. ISSN 0969-9988

Carrillo, P M and Dainty, A R J (2012) Workshops as embyronic boundary objects for collaborative university-industry innovation in construction. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Carson, C and Abbott, M (2012) A review of productivity analysis of the New Zealand construction industry. Construction Economics and Building, 12(3), pp. 1-15. ISSN 2204-9029

Carter, Nanette (2014) Do it yourself: The making of the modern home in post-war Australia. PhD thesis, University of Melbourne, Australia.

Carty, G J (1995) Construction. Journal of Construction Engineering and Management, 121(3), pp. 319-328. ISSN 0733-9364

Casady, C B (2019) Assessing public-private partnership (PPP) governance, institutionalization, and market maturity in the United States and abroad. PhD thesis, Stanford University, USA.

Cassimatis, P J (1967) The performance of the construction industry, 1946-1965. PhD thesis, New School for Social Research, USA.

Castelblanco, G; Fenoaltea, E M; De Marco, A and Chiaia, B (2025) Influence of macroeconomic factors on construction costs: An analysis of project cases. Construction Management and Economics, 43(3), pp. 196-212. ISSN 0144-6193

Castelblanco, G; Guevara, J; Mangano, G and Rafele, C (2024) Financial system dynamics model for multidimensional flexibility in toll road PPPs: a life-cycle analysis. Construction Management and Economics, 42(9), pp. 802-821. ISSN 01446193

Castelblanco, G; Mangano, G; Zenezini, G and De Marco, A (2025) Once concessioned, twice shy? Asymmetries of "reconcession" in national PPP programs. Construction Management and Economics, 43(6), pp. 405-427. ISSN 0144-6193

Castán Broto, V; Olazabal, M and Ziervogel, G (2024) Disrupting the imaginaries of urban action to deliver just adaptation. Buildings & Cities, 5(1), pp. 199-214. ISSN 2632-6655

Cattell, D W; Bowen, P A and Kaka, A P (2011) Proposed framework for applying cumulative prospect theory to an unbalanced bidding model. Journal of Construction Engineering and Management, 137(12), pp. 1052-1059. ISSN 0733-9364

Caven, V (2008) Architecture: A good career for girls? In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Cerić, A and Ivić, I (2025) Communication challenges and blockchain in building energy efficiency retrofits: Croatia case. Engineering, Construction and Architectural Management, 32(1), pp. 1-15. ISSN 0969-9988

Cerulli, C (2004) Supporting the knowledge management of design decision making in architecture. PhD thesis, University of Sheffield, UK.

Chabbi, R; Ferhoune, N and Bouabdallah, F (2023) Diagnostic of degraded reinforced concrete bridges explaining the environmental condition effect and reinforcement method. International Journal of Building Pathology and Adaptation, 41(4), pp. 825-848. ISSN 23984708

Chakravarty, S (2002) Essays on contracting in the construction industry. PhD thesis, University of Southern California, USA.

Chambers, M L (2021) Fine particulate air pollution and accident risk: Three essays. PhD thesis, Vanderbilt University, USA.

Chammout, B; El-Adaway, I H; Abdul Nabi, M and Assaad, R H (2024) Price escalation in construction projects: Examining national and international contracts. Journal of Construction Engineering and Management, 150(9): 04024109, ISSN 0733-9364

Champion, R (2011) A consideration of recovery of prolongation costs in a construction context. International Journal of Law in the Built Environment, 3(3), pp. 237-251. ISSN 1756-1450

Chan, A T S and Chan, E H W (2005) Impact of perceived leadership styles on work outcomes: Case of building professionals. Journal of Construction Engineering and Management, 131(4), pp. 413-422. ISSN 0733-9364

Chan, C F P (2001) The development of construction law in singapore. PhD thesis, University of London, UK.

Chan, C H F (2010) To talk or to fight? Collective effects of strategic, cultural, and institutional factors on investors' renegotiation approach in public-private concessions. PhD thesis, Stanford University, USA.

Chan, E H W (1997) Amicable dispute resolution in the people's republic of China and its implications for foreign-related construction disputes. Construction Management and Economics, 15(6), pp. 539-548. ISSN 01446193

Chan, H-W E (2003) A study of factors relevant to disputes arising in international construction projects involving both European and Asian cultural factors. PhD thesis, King's College London, UK.

Chan, Hon-Wan Edwin (2003) A study of contractual provisions relevant to disputes arising in international construction projects involving both European and East Asian cultural factors. PhD thesis, King's College London (University of London), UK.

Chan, J K W; Tam, C M and Cheung, R K C (2005) Construction firms at the crossroads in Hong Kong: Going insolvency or seeking opportunity. Engineering, Construction and Architectural Management, 12(2), pp. 111-124. ISSN 0969-9988

Chan, P W (2011) Queer(y)ing construction: Exploring sexuality and masculinity in construction. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Chan, P W (2013) Queer eye on a 'straight' life: Deconstructing masculinities in construction. Construction Management and Economics, 31(8), pp. 816-831. ISSN 1466433X

Chan, P W; Abbott, C; Cooper, R and Aouad, G (2005) Building future scenarios: A reflection for the research agenda. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Chan, P W and Connolly, M (2006) The role of schools careers advisers in encouraging new entrants into construction. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Chan, P W and Dainty, A R J (2007) Resolving the UK construction skills crisis: A critical perspective on the research and policy agenda. Construction Management and Economics, 25(4), pp. 375-386. ISSN 1466433X

Chan, P W and McCabe, S (2010) Emerging disparities: Exploring the impacts of the financial crisis on the UK construction labour market. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Chan, T K (2017) Global supply chains: A preliminary analysis of the Australian construction industry. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Chancellor, W and Abbott, M (2015) The Australian construction industry: Is the shadow economy distorting productivity? Construction Management and Economics, 33(3), pp. 176-186. ISSN 01446193

Chang, C Y (2013) When might a project company break up? The perspective of risk-bearing capacity. Construction Management and Economics, 31(12), pp. 1186-1198. ISSN 1466433X

Chang, C Y (2013) A critical review of the application of tce in the interpretation of risk allocation in PPP contracts. Construction Management and Economics, 31(2), pp. 99-103. ISSN 1466433X

Chang, C Y and Chen, S (2016) Transitional public-private partnership model in China: Contracting with little recourse to contracts. Journal of Construction Engineering and Management, 142(10): 05016011, ISSN 0733-9364

Chang, C Y and Ive, G (2007) Reversal of bargaining power in construction projects: Meaning, existence and implications. Construction Management and Economics, 25(8), pp. 845-855. ISSN 1466433X

Chang, Chen-Yu (2002) An economic interpretation of construction procurement behaviour for the commercial and industrial buildings. PhD thesis, University College London, UK.

Chang, L M; Georgy, M E and AbdelRazig, Y A (2000) Warranting quality of steel bridge coating. Journal of Construction Engineering and Management, 126(5), pp. 374-380. ISSN 0733-9364

Chang, L M; Hancher, D E; Napier, T R and Kapolnek, R G (1988) Methods to identify and assess new building technology. Journal of Construction Engineering and Management, 114(3), pp. 408-425. ISSN 0733-9364

Chang, S-W (2002) Development and assessment of the Tier II work force strategy implementation index. PhD thesis, University of Texas at Austin, USA.

Chao, C-H (2001) Formulation of an e -business inter-enterprise collaboration for the construction industry. PhD thesis, Northwestern University, USA.

Chaphalkar, N and Iyer, K C (2014) Factors influencing decisions on delay claims in construction contracts for Indian scenario. Construction Economics and Building, 14(1), pp. 32-44. ISSN 2204-9029

Chapman, M (2016) Litigation following UK Water Resources Act section 110 appeal. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 169(2), pp. 85-90. ISSN 17514304

Chapman, P H J (2009) Dispute boards on major infrastructure projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 162(1), pp. 7-16. ISSN 17514312

Charkhakan, M H and Heravi, G (2019) Evaluating the preventability of conflicts arising from change occurrence in construction projects. Engineering, Construction and Architectural Management, 26(8), pp. 1777-1800. ISSN 0969-9988

Charles, A (2012) Factors affecting the transformation of existing (no-fines concrete) dwellings to low carbon homes. PhD thesis, Glasgow Caledonian University, UK.

Charley, J (1995) The dialectic of the built environment: A study in the historical transformation of labour and space. PhD thesis, University of Strathclyde, UK.

Chau, C K; Lee, W L; Yik, F W H and Burnett, J (2000) Towards a successful voluntary building environmental assessment scheme. Construction Management and Economics, 18(8), pp. 959-968. ISSN 01446193

Chau, K W; Lai, L W C; Liang, J; Ng, F F and Wong, K T (2021) The negative impact of public sector-led redevelopment projects on the prices of old and new housing units in high density urban areas. International Journal of Construction Management, 21(11), pp. 1156-1164. ISSN 1562-3599

Chauhan, H; Jang, Y and Jeong, I (2026) Assessing the impact of human-robot collaboration on worker productivity in construction through psychophysiological response analysis. Journal of Construction Engineering and Management, 152(3): 04025273, ISSN 0733-9364

Che Ibrahim, C K I; Costello, S B and Wilkinson, S (2018) Making sense of team integration practice through the "lived experience" of alliance project teams. Engineering, Construction and Architectural Management, 25(5), pp. 598-622. ISSN 0969-9988

Che Wan Putra, C W F (1998) CAPE construction application protocol for data transfer: a building data model. PhD thesis, University of Salford, UK.

Cheah, Charmaine Yi Ting (2017) Development of a methodology to quantify installation damage on geotextile for coastal application. PhD thesis, Queensland University of Technology, Australia.

Cheah, Y J (2002) Fundamental analysis and conceptual model for corporate strategy in global engineering and construction markets. PhD thesis, Massachusetts Institute of Technology, USA.

Chellappa, V and Salve, U R (2023) Exploring barriers to effective safety risk assessment in Indian construction projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(3), pp. 122-130. ISSN 17514304

Chellappa, V and Srivastava, V (2024) Science mapping approach based review of thermal comfort studies in Indian residential buildings. Journal of Engineering, Design and Technology, 22(2), pp. 297-315. ISSN 1726-0531

Chen, C (2016) Crane planning optimization for construction. PhD thesis, National University of Singapore, Singapore.

Chen, C; Lv, L; Wang, Z and Qiao, R (2023) Bargaining optimization model for risk renegotiation with fairness concerns in infrastructure PPP projects. Engineering, Construction and Architectural Management, 30(9), pp. 3876-3894. ISSN 0969-9988

Chen, J (2021) Study on the joint mechanical properties of steel structure buildings. International Journal of Building Pathology and Adaptation, 39(4), pp. 655-665. ISSN 23984708

Chen, J H; Yang, L R; Chen, W H and Chang, C K (2008) Case-based allocation of onsite supervisory manpower for construction projects. Construction Management and Economics, 26(8), pp. 805-814. ISSN 01446193

Chen, J J (1997) China's construction industry and foreign investment. Building Research & Information, 25(1), pp. 5-10. ISSN 0961-3218

Chen, J J (1997) The impact of Chinese economic reforms upon the construction industry. Building Research & Information, 25(4), pp. 239-245. ISSN 0961-3218

Chen, J J (1998) The characteristics and current status of China's construction industry. Construction Management and Economics, 16(6), pp. 711-719. ISSN 01446193

Chen, J J and Chambers, D (1999) Sustainability and the impact of Chinese policy initiatives upon construction. Construction Management and Economics, 17(5), pp. 679-687. ISSN 01446193

Chen, K; Loo, S C and Alias, A (2024) A bibliometric review of maturity model studies in the construction industry. Journal of Construction in Developing Countries, 29(2), pp. 129-145. ISSN 1823-6499

Chen, K; You, B; Zhang, Y and Chen, Z (2025) Automatic lift path planning of prefabricated building components using semantic BIM, improved A* and GA. Engineering, Construction and Architectural Management, 32(6), pp. 4100-4124. ISSN 0969-9988

Chen, L; Lu, Q and Zhao, X (2022) A semi-automatic image-based object recognition system for constructing as-is IFC BIM objects based on fuzzy-maut. International Journal of Construction Management, 22(1), pp. 51-65. ISSN 1562-3599

Chen, P; Partington, D and Qiang, M (2009) Cross-cultural understanding of construction project managers' conceptions of their work. Journal of Construction Engineering and Management, 135(6), pp. 477-487. ISSN 0733-9364

Chen, Q (2007) An object model framework for interface management in building information models. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Chen, Q; Garcia de Soto, B and Adey, B (2022) Transshipment approach to coordinate materials for a contractor's project portfolio. International Journal of Construction Management, 22(16), pp. 3065-3076. ISSN 1562-3599

Chen, Q; Reichard, G and Beliveau, Y (2008) Multiperspective approach to exploring comprehensive cause factors for interface issues. Journal of Construction Engineering and Management, 134(6), pp. 432-441. ISSN 0733-9364

Chen, Qian (2020) A systematic approach to enabling digital supply chain coordination in construction projects. PhD thesis, ETH Zürich, Switzerland.

Chen, T Y-J (2019) Advancing quantitative risk analysis for critical water infrastructure. PhD thesis, University of Michigan, USA.

Chen, W-T (1994) Developing a knowledge-based expert system to determine contract duration for highway construction. PhD thesis, University of Florida, USA.

Chen, X B and Kim, T W (2017) Automated mapping of user activities onto flexible space in space-use analysis. Journal of Construction Engineering and Management, 143(8): 04017034, ISSN 0733-9364

Chen, Y-T (2008) Automated on-site productivity evaluation using RFID and GPS. PhD thesis, Purdue University, USA.

Chen, Z (2003) An integrated analytical approach to environmental management in construction. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Cheng, M.; Chong, H. Y.; Xu, Y.; Chi, M. and Liu, G. (2026) Dynamic interplay for blockchain-smart contracts (sc) adoption among government, private owners and general contractors across stages of contract development. Engineering, Construction and Architectural Management, 33(7), pp. 5445-5468. ISSN 0969-9988

Cheng, G and Wilmot, C G (2009) Louisiana highway construction cost trend after hurricanes Katrina and Rita. Journal of Construction Engineering and Management, 135(7), pp. 594-600. ISSN 0733-9364

Cheng, J (2005) A simulation access language and framework with applications to project management. PhD thesis, Stanford University, USA.

Cheng, J C P; Chen, K; Wong, P K Y; Chen, W and Li, C T (2021) Graph-based network generation and CCTV processing techniques for fire evacuation. Building Research & Information, 49(2), pp. 179-196. ISSN 0961-3218

Cheng, M Y and Tsai, M H (2003) Reengineering of construction management process. Journal of Construction Engineering and Management, 129(1), pp. 105-114. ISSN 0733-9364

Cheng, T; Soo, G; Kumaraswamy, M and Jin, W (2010) Security of payment for Hong Kong construction industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 163(1), pp. 17-28. ISSN 17514312

Cheong, S P (2004) Functional briefing for whole life performance. PhD thesis, Loughborough University, UK.

Cheung, F Y K; Rowlinson, S; Jefferies, M and Lau, E (2005) Relationship contracting in Australia. Journal of Construction Procurement, 11(2),

Cheung, S O and Pang, K H Y (2013) Anatomy of construction disputes. Journal of Construction Engineering and Management, 139(1), pp. 15-23. ISSN 0733-9364

Cheung, S O; Yiu, K T W and Suen, H (2004) Construction negotiation online. Journal of Construction Engineering and Management, 130(6), pp. 844-852. ISSN 0733-9364

Chew, M Y L and De Silva, N (2004) Factorial method for performance assessment of building facades. Journal of Construction Engineering and Management, 130(4), pp. 525-533. ISSN 0733-9364

Chi, Sae (2018) Developing a methodology for evaluating privately operated toll road projects using stochastic cost-benefit analysis. PhD thesis, Queensland University of Technology, Australia.

Chia, F C (2012) Construction and economic development: The case of Malaysia. International Journal of Construction Management, 12(1), pp. 23-35. ISSN 1562-3599

Chiang, R (2002) Agency and incentive contract in private investment of transport project: An exploration of fundamental relationships. PhD thesis, Massachusetts Institute of Technology, USA.

Chiang, Y H and Lok, L K L (2006) Sustainable advantages and corporate strategies: The case of prefabrication in Hong Kong. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Chiang, Y H; Tang, B S and Leung, W Y (2001) Market structure of the construction industry in Hong Kong. Construction Management and Economics, 19(7), pp. 675-687. ISSN 01446193

Chih, Y Y; Kiazad, K; Li, M; Capezio, A; Zhou, L and Restubog, S L D (2017) Broken promises: Implications for the job insecurity and job performance of Chinese construction workers. Journal of Construction Engineering and Management, 143(4): 04016114, ISSN 0733-9364

Chih, Y Y; Kiazad, K; Zhou, L; Capezio, A; Li, M and Restubog, S L D (2016) Investigating employee turnover in the construction industry: A psychological contract perspective. Journal of Construction Engineering and Management, 142(6): 04016006, ISSN 0733-9364

Chileshe, N (2006) Investigating practitioner's understanding of TQM in small and medium construction companies. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Chileshe, N (2007) Quality management concepts, principles, tools and philosophies: A valid methodology for deployment within UK construction-related SMEs. Journal of Engineering, Design and Technology, 5(1), pp. 49-67. ISSN 1726-0531

Chin, K S and Choi, T W (2003) Construction in Hong Kong: Success factors for iso9000 implementation. Journal of Construction Engineering and Management, 129(6), pp. 599-609. ISSN 0733-9364

Chinanuwatwong, S (1998) Scheduling overtime in construction using time-cost trade-off. PhD thesis, University of Texas at Austin, USA.

Chinda, Thanwadee (2008) A system dynamics approach to construction safety culture. PhD thesis, Griffith University, Australia.

Chinowsky, P; Diekmann, J and Galotti, V (2008) Social network model of construction. Journal of Construction Engineering and Management, 134(10), pp. 804-812. ISSN 0733-9364

Chinowsky, P S and Diekmann, J E (2004) Construction engineering management educators: History and deteriorating community. Journal of Construction Engineering and Management, 130(5), pp. 751-758. ISSN 0733-9364

Chiozzi, Maria Alma (2020) A collaborative contracting framework supported by BIM and lean. PhD thesis, Queensland University of Technology, Australia.

Chiponde, D; Gledson, B and Greenwood, D (2019) Examining construction and project management perspectives of project-based failure. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Chiu, L F; Lowe, R; Raslan, R; Altamirano-Medina, H and Wingfield, J (2014) A socio-technical approach to post-occupancy evaluation: Interactive adaptability in domestic retrofit. Building Research & Information, 42(5), pp. 574-590. ISSN 0961-3218

Chmutina, K; Lizarralde, G; von Meding, J K and Bosher, L (2023) Standardised indicators for "resilient cities": The folly of devising a technical solution to a political problem. International Journal of Disaster Resilience in the Built Environment, 14(4), pp. 514-535. ISSN 1759-5916

Cho, C; Kim, K; Park, J and Cho, Y K (2018) Data-driven monitoring system for preventing the collapse of scaffolding structures. Journal of Construction Engineering and Management, 144(8): 04018077, ISSN 0733-9364

Choe, Sooyoung (2015) 4-dimensional process-aware site-specific construction safety planning. PhD thesis, University of Texas at Austin, USA.

Choi, C Y and Honda, R (2019) Motive and conflict in the disaster recovery process: Housing reconstruction in Sri Lanka after the 2004 Indian ocean tsunami. International Journal of Disaster Resilience in the Built Environment, 10(5), pp. 408-419. ISSN 1759-5916

Choi, H H and Mahadevan, S (2008) Construction project risk assessment using existing database and project-specific information. Journal of Construction Engineering and Management, 134(11), pp. 894-903. ISSN 0733-9364

Choi, J O; O'Connor, J T and Kim, T W (2016) Recipes for cost and schedule successes in industrial modular projects: Qualitative comparative analysis. Journal of Construction Engineering and Management, 142(10): 04016055, ISSN 0733-9364

Choi, K; Kwak, Y H; Pyeon, J H and Son, K (2012) Schedule effectiveness of alternative contracting strategies for transportation infrastructure improvement projects. Journal of Construction Engineering and Management, 138(3), pp. 323-330. ISSN 0733-9364

Chomicka, B A (2013) Drivers and cost implications of quality failures in commercial offices. PhD thesis, Glasgow Caledonian University, UK.

Chong, H Y; Wang, T; Lee, C Y; Goh, C S and Li, S (2026) Integrating BIM, ar, GPS, and 5g for real-time construction management: Application to water infrastructure projects. Journal of Construction Engineering and Management, 152(5): 05026001, ISSN 0733-9364

Chong, D; Wang, Y; Guo, H and Lu, Y (2014) Volatile organic compounds generated in asphalt pavement construction and their health effects on workers. Journal of Construction Engineering and Management, 140(2): 04013051, ISSN 0733-9364

Chong, H Y; Zin, R M and Chong, S C (2013) Employing data warehousing for contract administration: E-dispute resolution prototype. Journal of Construction Engineering and Management, 139(6), pp. 611-619. ISSN 0733-9364

Choo, H J; Tommelein, I D; Ballard, G and Zabelle, T R (1999) Workplan: Constraint-based database for work package scheduling. Journal of Construction Engineering and Management, 125(3), pp. 151-160. ISSN 0733-9364

Chotibhongs, R (2011) Managing the bidding process for the construction owner-detection and prevention of unbalanced bids and collusive bids. PhD thesis, Illinois Institute of Technology, USA.

Choudhury, T (2013) Experiences of women as workers: A study of construction workers in Bangladesh. Construction Management and Economics, 31(8), pp. 883-898. ISSN 1466433X

Choudhury, T (2014) Masculinities, feminities and gender relations in contemporary Bangladesh: an analysis of the construction sector in Sylhet. PhD thesis, University of Hull, UK.

Chovichien, V (1981) The discounted cost model and application to acquisition and utilization policies of construction equipment. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Chovichien, V and Suriyanon, N (2011) Attitudes of people in the Thai construction industry sector on issues related to delay in the approval of submittals. Journal of Construction in Developing Countries, 16(1), pp. 41-67. ISSN 1823-6499

Chow, V W and Leiringer, R (2014) The translation of power: A study of boundary objects in public engagement processes. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Christensen, T H; Aagaard, L K; Juvik, A K; Samson, C and Gram-Hanssen, K (2024) Promoting practices of sufficiency: Reprogramming resource-intensive material arrangements. Buildings & Cities, 5(1), pp. 629-644. ISSN 2632-6655

Christudason, A (2009) Property rights: Achieving a fine balance in collective sales of strata developments in Singapore. International Journal of Law in the Built Environment, 1(1), pp. 26-41. ISSN 1756-1450

Christudason, A and Kenna, P (2010) Can housing rights be applied to modern housing systems? International Journal of Law in the Built Environment, 2(2), pp. 103-117. ISSN 1756-1450

Christudason, A; Kenna, P; Amann, W and Mundt, A (2010) Designing a new rental housing law for Romania. International Journal of Law in the Built Environment, 2(2), pp. 157-177. ISSN 1756-1450

Christudason, A; Kenna, P and Lujanen, M (2010) Legal challenges in ensuring regular maintenance and repairs of owner-occupied apartment blocks. International Journal of Law in the Built Environment, 2(2), pp. 178-197. ISSN 1756-1450

Christudason, A; Kenna, P and Ponce, J (2010) Housing discrimination and minorities in European cities: The Catalan Right to Housing Act 2007. International Journal of Law in the Built Environment, 2(2), pp. 138-156. ISSN 1756-1450

Chritamara, S; Ogunlana, S O and Bach, N L (2002) System dynamics modeling of design and build construction projects. Construction Innovation, 2(4), pp. 269-295. ISSN 1471-4175

Chua, D K H and Li, G M (2002) RISim: Resource-interacted simulation modeling in construction. Journal of Construction Engineering and Management, 128(3), pp. 195-202. ISSN 0733-9364

Chua, D K H and Shen, L J (2005) Key constraints analysis with integrated production scheduler. Journal of Construction Engineering and Management, 131(7), pp. 753-764. ISSN 0733-9364

Chua, D K H; Shen, L J and Bok, S H (2003) Constralnt-based planning with integrated production scheduler over internet. Journal of Construction Engineering and Management, 129(3), pp. 293-301. ISSN 0733-9364

Chung, B; Skibniewski, M J and Kwak, Y H (2009) Developing ERP systems success model for the construction industry. Journal of Construction Engineering and Management, 135(3), pp. 207-216. ISSN 0733-9364

Chung, H C P and Adeyeye, K (2018) Structural flood damage and the efficacy of property-level flood protection. International Journal of Building Pathology and Adaptation, 36(5), pp. 471-499. ISSN 23984708

Clark, G G (1993) Rule-based integrated building management systems. PhD thesis, Brunel University, UK.

Clarke, G M (1995) The integration of economic and environmental factors in project feasibility planning. PhD thesis, Texas A&M University, USA.

Clarke, L; Gleeson, C and Winch, C (2017) What kind of expertise is needed for low energy construction? Construction Management and Economics, 35(3), pp. 78-89. ISSN 01446193

Clarke, L; Sahin-Dikmen, M and Winch, C (2020) Transforming vocational education and training for nearly zero-energy building. Buildings & Cities, 1(1), pp. 650-661. ISSN 2632-6655

Clarke, N J; Kuipers, M C and Roos, J (2020) Cultural resilience and the smart and sustainable city: Exploring changing concepts on built heritage and urban redevelopment. Smart and Sustainable Built Environment, 9(2), pp. 144-155. ISSN 2046-6099

Clegg, P (2012) A practitioner's view of the 'regenerative paradigm'. Building Research & Information, 40(3), pp. 365-368. ISSN 0961-3218

Clemens, R J (1982) A history of the United Brotherhood of Carpenters and Joiners in Missouri, 1881-1981. PhD thesis, University of Missouri - Columbia, USA.

Clement, D; Aliabadi, A A; MacKey, J; Thé, J and Gharabaghi, B (2021) Dust emissions management model for construction sites. Journal of Construction Engineering and Management, 147(8): 04021092, ISSN 0733-9364

Clevenger, C M and Haymaker, J R (2012) The value of design strategies applied to energy efficiency. Smart and Sustainable Built Environment, 1(3), pp. 222-240. ISSN 2046-6099

Clossick, J and Khonsari, T (2025) Living labs: Epistemic modelling, temporariness and land value. Buildings & Cities, 6(1), pp. 841-861. ISSN 2632-6655

Cockerill, J E (1993) The construction industry in belfast 1800-1914. PhD thesis, Queen's University Belfast, UK.

Cody, B; Loeschnig, W and Eberl, A (2018) Operating energy demand of various residential building typologies in different European climates. Smart and Sustainable Built Environment, 7(3-4), pp. 226-250. ISSN 2046-6099

Coenen, T B J; Volker, L and Visscher, K (2021) Introducing circular innovation in the construction industry: The case of the circular viaduct. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Coffey, M (2010) The attitude of construction employees towards authority and employers. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Coffey, M and Langford, D (1998) The propensity for employee participation by electrical and mechanical trades in the construction industry. Construction Management and Economics, 16(5), pp. 543-552. ISSN 01446193

Coggins, J (2011) From disparity to harmonisation of construction industry payment legislation in Australia: A proposal for a dual process of adjudication based upon size of progress payment claim. Construction Economics and Building, 11(2), pp. 34-59. ISSN 2204-9029

Cohen, L (1972) A study of the effect of legal requirements on the design and construction of public school buildings in Pennsylvania. EdD thesis, Temple University, USA.

Cole, R J (2023) Transition to a regenerative future: A question of time. Buildings & Cities, 4(1), pp. 457-474. ISSN 2632-6655

Cole, R J; Brown, Z and McKay, S (2010) Building human agency: A timely manifesto. Building Research & Information, 38(3), pp. 339-350. ISSN 0961-3218

Collett, M; Hardy, A; Meulemans, J and Glew, D (2022) Evaluating the performance of a high thermal mass dwelling: Comparing predictions and in-situ measurements. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Collier, C A and Jacques, D E (1984) Optimum equipment life by minimum life-cycle costs. Journal of Construction Engineering and Management, 110(2), pp. 248-265. ISSN 0733-9364

Collinge, W (2020) Stakeholder engagement in construction: Exploring corporate social responsibility, ethical behaviors, and practices. Journal of Construction Engineering and Management, 146(3): 04020003, ISSN 0733-9364

Collinge, W H (2011) Understanding stakeholder requirements on an NHS hospital project: Application of semiotics-rooted theories. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Collinge, W H (2025) Advancing social practice understandings of digital innovation delivery in construction project management. Engineering, Construction and Architectural Management, 32(7), pp. 4611-4630. ISSN 0969-9988

Collins, F (2013) 2nd generation concrete construction: Carbon footprint accounting. Engineering, Construction and Architectural Management, 20(4), pp. 330-344. ISSN 0969-9988

Comelli, T; Pelling, M; Hope, M; Ensor, J; Filippi, M E; Menteşe, E Y and McCloskey, J (2024) Normative future visioning: A critical pedagogy for transformative adaptation. Buildings & Cities, 5(1), pp. 83-100. ISSN 2632-6655

Connaughton, J and Meikle, J (2013) The changing nature of UK construction professional service firms. Building Research & Information, 41(1), pp. 95-109. ISSN 0961-3218

Connell, A and Mason, J (2014) Isn't all loss consequential? A review of recent case law and its relevance to contractual practices within the built environment. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Connell, A and Mason, J (2015) Isn't all loss consequential? A review of recent case law and its relevance to contractual practices within the built environment. International Journal of Law in the Built Environment, 7(3), pp. 176-194. ISSN 1756-1450

Conradie, D C U (2001) The use of software systems to implement case-based reasoning enabled intelligent components for architectural briefing and design. SkoglDr thesis, University of Pretoria, South Africa.

Contarini, A and Meijer, A (2015) LCA comparison of roofing materials for flat roofs. Smart and Sustainable Built Environment, 4(1), pp. 97-109. ISSN 2046-6099

Cooke, John Richard (1973) Methods of documentation and administration of building contracts. PhD thesis, University of New South Wales, Australia.

Cooke, T and Lingard, H (2011) A retrospective analysis of work-related deaths in the Australian construction industry. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Cooke, T; Lingard, H; Blismas, N and Stranieri, A (2008) ToolSHeD™: The development and evaluation of a decision support tool for health and safety in construction design. Engineering, Construction and Architectural Management, 15(4), pp. 336-351. ISSN 0969-9988

Coombe-Davies, M (1985) The laws on contract liability as they specifically relate to architectural practice. PhD thesis, University College Cardiff, UK.

Cooper, Arthur Ashley (1971) An economic study of housing production and associated works in Australia. PhD thesis, University of New South Wales, Australia.

Cooper, I (1997) The UK's changing research base for construction. Building Research & Information, 25(5), pp. 268-300. ISSN 0961-3218

Cooper, I (2009) Comfort in a brave new world. Building Research & Information, 37(1), pp. 95-100. ISSN 0961-3218

Coram, W R (1997) The privatisaton of the property services agency. PhD thesis, University of Manchester, UK.

Costantino, N (2006) The contribution of Ranko Bon to the debate on sustainable construction. Construction Management and Economics, 24(7), pp. 705-709. ISSN 1466433X

Costantino, N; Pellegrino, R and Pietroforte, R (2011) Asset specificity and specialization in the U.S. Construction industry: A transaction cost theory interpretation. International Journal of Construction Management, 11(4), pp. 13-30. ISSN 1562-3599

Costantino, N and Pietroforte, R (2004) Production arrangements by us building and non-building contractors: An update. Construction Management and Economics, 22(3), pp. 231-235. ISSN 01446193

Costanzo, V; Fabbri, K; Schito, E; Pretelli, M and Marletta, L (2021) Microclimate monitoring and conservation issues of a baroque church in Italy: A risk assessment analysis. Building Research & Information, 49(7), pp. 729-747. ISSN 0961-3218

Couto, A and Couto, J (2007) Why deconstruction is not adequately considered in Portuguese building refurbishment. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Couto, J P and Teixeira, J C (2005) Using linear model for learning curve effect on highrise floor construction. Construction Management and Economics, 23(4), pp. 355-364. ISSN 01446193

Cox, A and Townsend, M (1997) Latham as half-way house: A relational competence approach to better practice in construction procurement. Engineering, Construction and Architectural Management, 4(2), pp. 143-158. ISSN 0969-9988

Crawford, L (2001) Project management competence: the value of standards. PhD thesis, Henley Business School, UK.

Crawford, L T (2002) Public policy, the modern view and the training-investment decisions of the firm: Is a minimalist approach to public sector intervention the answer? PhD thesis, University of Western Sydney, Australia.

Crespin-Mazet, F (2007) Co-Development as an alternative to competitive bidding in project business. PhD thesis, University of Manchester, UK.

Croome, D J (1978) Building environmental engineering. PhD thesis, Loughborough University, UK.

Crowley, A J (1998) The development & implementation of a product model for constructional steelwork. PhD thesis, University of Leeds, UK.

Cuervo, J C and Pheng, L S (2003) Significance of location factors for Singapore transnational construction corporations. Engineering, Construction and Architectural Management, 10(5), pp. 342-353. ISSN 0969-9988

Cui, L (2023) Collusion governance strategies under the construction supervision system in China. Construction Management and Economics, 41(9), pp. 724-738. ISSN 01446193

Cui, L (2025) Incentive contract design and selection for inhibiting unethical collusion in construction projects. Engineering, Construction and Architectural Management, 32(2), pp. 870-892. ISSN 0969-9988

Curtis, B (1994) Roles, responsibilities and risks in management contracts. PhD thesis, University of Southampton, UK.

Curwell, S and Cooper, I (1998) The implications of urban sustainability. Building Research & Information, 26(1), pp. 17-28. ISSN 0961-3218

Cushman, N S; Nam, C H and Tatum, C B (1992) Technology transfer in building construction: case of seismic design. Journal of Construction Engineering and Management, 118(1), pp. 129-141. ISSN 0733-9364

Czekajlo, A; Alva, J; Szeto, J; Girling, C and Kellett, R (2023) Impact of 2050 tree shading strategies on building cooling demands. Buildings & Cities, 4(1), pp. 817-837. ISSN 2632-6655

D'Onofrio, R M (2017) CPM scheduling: A 60-year history. Journal of Construction Engineering and Management, 143(10): 02517010, ISSN 0733-9364

Dabash, M S (2022) Applications of computer vision to improve construction site safety and monitoring. PhD thesis, University of Delaware, USA.

Dabbas, M A A (1981) Computerized decision making in construction. PhD thesis, Georgia Institute of Technology, USA.

Dabirian, S; Abbaspour, S; Khanzadi, M and Ahmadi, M (2022) Dynamic modelling of human resource allocation in construction projects. International Journal of Construction Management, 22(2), pp. 182-191. ISSN 1562-3599

Daegu, C (2009) Construction information database framework (CIDF) for integrated cost, schedule, and performance control. PhD thesis, University of Wisconsin - Madison, USA.

Dahlan, N D; Ghaffarianhoseini, A and Hassan, N (2022) Sensory and physiological assessment of spatial transient thermal environment changes at a tropical university campus. Smart and Sustainable Built Environment, 11(3), pp. 516-531. ISSN 2046-6099

Dainty, A R J; Bagilhole, B M and Neale, R H (1998) Improving the retention of construction professionals: A soft HRM approach. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Dainty, A R J; Briscoe, G H and Millett, S J (2001) Subcontractor perspectives on supply chain alliances. Construction Management and Economics, 19(8), pp. 841-848. ISSN 01446193

Dainty, A R J; Harty, T E and Neale, R H (2000) Improving employee resourcing within large construction organizations. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Dainty, A R J; Ison, S G and Briscoe, G H (2005) The construction labour market skills crisis: The perspective of small-medium-sized firms. Construction Management and Economics, 23(4), pp. 387-398. ISSN 01446193

Dainty, A R J and Moore, D R (2000) The performance of integrated D&B project teams in unexpected change event management. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Dallı, M and Soyluk, A (2024) Ethical analysis of architecture on structural irregularities in major earthquakes in Turkey. International Journal of Disaster Resilience in the Built Environment, 15(2), pp. 259-273. ISSN 1759-5916

Damas Mollá, L; Sagarna Aranburu, M; Uriarte, J A; Aranburu, A; Zabaleta, A; García-García, F; Antigüedad, I and Morales, T (2020) Understanding the pioneering techniques in reinforced concrete: The case of Punta Begoña Galleries, Getxo, Spain. Building Research & Information, 48(7), pp. 785-801. ISSN 0961-3218

Damci, A; Arditi, D and Polat, G (2013) Multiresource leveling in line-of-balance scheduling. Journal of Construction Engineering and Management, 139(9), pp. 1108-1116. ISSN 0733-9364

Damdelen, O and Tansu, A (2022) Influence of recycled plastic on the thermal transmittance and sustainable assessment of concrete mixes. Journal of Construction Engineering and Management, 148(12): 04022135, ISSN 0733-9364

Danks, S; Shephard, A and Wild, A (1998) Architecture as the practice of design and the organization of practice. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Dar, J (2020) Solar splitting day-lighting system "SolsDays": The first beam splitting day-lighting system. Smart and Sustainable Built Environment, 9(2), pp. 130-143. ISSN 2046-6099

Dave, N; Guduru, R; Misra, A K and Sharma, A K (2022) Experimental evaluation of bond behavior in controlled, binary and quaternary concretes developed using scms. Journal of Engineering, Design and Technology, 20(6), pp. 1430-1448. ISSN 1726-0531

Dave, N; Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology, 18(5), pp. 1321-1333. ISSN 1726-0531

Davenport, D M and Smith, R (1995) International procurement systems: Assessment of required levels of client participation in construction projects. Journal of Construction Procurement, 1(1), pp. 38-49. ISSN 1358-9180

Davenport, P (2010) Harmonisation of chalk and cheese. Construction Economics and Building, 10(3), pp. 36-50. ISSN 2204-9029

Davenport, P and Brand, M C (2013) The effectiveness of time bar clauses following the high court in decision in Andrews v. Australia and New Zealand Banking Group. International Journal of Law in the Built Environment, 5(3), pp. 241-252. ISSN 17561469

Davey, C L; Powell, J A; Cooper, I and Powell, J E (2004) Innovation, construction SMEs and action learning. Engineering, Construction and Architectural Management, 11(4), pp. 230-237. ISSN 0969-9988

Davidson, C H (2001) Technology watch in the construction sector: Why and how? Building Research & Information, 29(3), pp. 233-241. ISSN 0961-3218

Davies, R (2006) Talking about construction innovation. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Davis, K; Ledbetter, W B and Burati, J L (1989) Measuring design and construction quality costs. Journal of Construction Engineering and Management, 115(3), pp. 385-400. ISSN 0733-9364

Davis, Michael (2023) A phenomenology examining perceptions of knowledge management techniques in construction and practical possibilities to retain organizational knowledge. EdD thesis, Drake University (Iowa), USA.

Davtalab, O (2018) A data driven software platform for process automation, planning and inspection of contour crafting large-scale robotic 3D printing system. PhD thesis, University of Southern California, USA.

Dawood, N N and Marasini, R (1999) Optimization of stockyard layout for the pre-cast building products industry. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

De Biasio, A and Murray, A (2017) The social network of the UK PPP secondary equity market: Returns and competition in an emerging market. Construction Management and Economics, 35(8-9), pp. 468-481. ISSN 0144-6193

De Garay, A (1982) Evaluation of public housing strategies in Mexico City: an exploratory goal programming approach. PhD thesis, Aston University, UK.

De La Garza, J M and Mitropoulos, P (1992) Flavors and mixins of expert systems technology transfer model for AEC industry. Journal of Construction Engineering and Management, 118(3), pp. 435-453. ISSN 0733-9364

De La Garza-Rodriguez, J M (1988) A knowledge engineering approach to the analysis and evaluation of schedules for mid-rise construction. PhD thesis, University of Illinois at Urbana-Champaign, USA.

De Luca, A; Chen, L and Gharehbaghi, K (2021) Sustainable utilization of recycled aggregates: Robust construction and demolition waste reduction strategies. International Journal of Building Pathology and Adaptation, 39(4), pp. 666-682. ISSN 23984708

De Marco, A; Rafele, C and Thaheem, M J (2016) Dynamic management of risk contingency in complex design-build projects. Journal of Construction Engineering and Management, 142(2): 04015080, ISSN 0733-9364

De Toldi, T; Craig, S and Sushama, L (2022) Internal thermal mass for passive cooling and ventilation: Adaptive comfort limits, ideal quantities, embodied carbon. Buildings & Cities, 3(1), pp. 42-67. ISSN 2632-6655

De Toldi, T and Pestre, T (2023) The relevance of cut-stone to strategies for low-carbon buildings. Buildings & Cities, 4(1), pp. 229-257. ISSN 2632-6655

Dean, W E (1992) Earthquakes and old buildings: Seismic risk permits for California structures. PhD thesis, RAND Graduate School, USA.

Dehdasht, G; Ferwati, M S; Mohandes, S R; El-Sabek, L and Edwards, D J (2023) Towards expediting the implementation of sustainable and successful lean paradigm for construction projects: A hybrid of dematel and SNA approach. Engineering, Construction and Architectural Management, 30(9), pp. 4294-4318. ISSN 0969-9988

Del Caño, A and De La Cruz, M P (2002) Integrated methodology for project risk management. Journal of Construction Engineering and Management, 128(6), pp. 473-485. ISSN 0733-9364

Delaney, F T and Wamuziri, S C (2001) Mergers and acquisitions in the construction industry. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Delaney, F T and Wamuziri, S C (2002) Efficiency and performance effects of mergers and acquisitions in the construction industry. Journal of Financial Management of Property and Construction, 7(3), pp. 141-150. ISSN 1366-4387

Delatte, N J (2017) Challenges of civil engineering megaprojects in North America. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(4), pp. 161-166. ISSN 17514304

Delavar, M (2017) BIM assisted design process automation for pre-engineered buildings (PEB). PhD thesis, University of Western Ontario, Canada.

Delgado, O A H (1998) Decision making for the selection of investment projects. PhD thesis, University of Nottingham, UK.

Deltas, G M (1996) Essays in auctions and procurement: An analysis of bidding rings, left bids, stochastic properties of winning bids, and two step structural estimators of bidding for contracts. PhD thesis, Yale University, USA.

Delwar, M (1998) A generic LCCA algorithm for pavement management decisions. PhD thesis, Washington State University, USA.

Deng, L. and Zu, F. (2026) Promoting public housing development on private land: The case of Hong Kong. Engineering, Construction and Architectural Management, pp. 1-24. ISSN 0969-9988

Deng, F; Smyth, H and Anvuur, A (2012) A critical review of pms in construction: Towards a research agenda. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Deng, T; Sharafat, A; Lee, S and Seo, J (2024) Automatic vision-based dump truck productivity measurement based on deep-learning illumination enhancement for low-visibility harsh construction environment. Journal of Construction Engineering and Management, 150(11): 04024154, ISSN 0733-9364

Deng, X (2008) Research on agent construction management mode and principal-agent relationship. PhD thesis, Wuhan University, China.

Denny-Smith, G and Loosemore, M (2017) Integrating indigenous enterprises into the Australian construction industry. Engineering, Construction and Architectural Management, 24(5), pp. 788-808. ISSN 0969-9988

Denny-Smith, G and Loosemore, M (2017) Assessing the impact of australia's indigenous procurement policy using strain theory. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Denny-Smith, G and Loosemore, M (2018) Cultural counterfactuals: Assessing the impact of indigenous social procurement in Australia. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Deotale, N T (2022) Mimo-orthogonal space time block code system joint with BCH-TC in rayleigh fading channel for performance of transmit antenna selection. Journal of Engineering, Design and Technology, 20(6), pp. 1648-1663. ISSN 1726-0531

Dethridge, L and Quinn, B (2016) Realtime emergency communication in virtual worlds. International Journal of Disaster Resilience in the Built Environment, 7(1), pp. 26-39. ISSN 1759-5916

Devapriya, K A K and Pretorius, F I H (2002) Project finance in Asia: Governing variables of past, present, and future pf arrangements in power projects. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Dhandapani, K and Reddy Sathi, R (2011) Embedded controlled low-frequency AC to high-frequency AC converter fed induction heater. Journal of Engineering, Design and Technology, 9(1), pp. 7-18. ISSN 1726-0531

Dhanshyam, M and Srivastava, S K (2021) Governance structures for public infrastructure projects: Public-private management regimes, contractual forms and innovation. Construction Management and Economics, 39(8), pp. 652-668. ISSN 01446193

Dharmayanti, Gusti Ayu Putu Candra (2013) The impact of organisational culture in project selection process: Case of public infrastructure project in Indonesia. PhD thesis, Queensland University of Technology, Australia.

Dhawan, K; Tookey, J; Fredriksson, A and Tetik, M (2026) Decarbonising construction logistics: The role of supplier-led distribution and integrated warehousing. Construction Innovation, 26(9), pp. 21-48. ISSN 1471-4175

Di Maddaloni, F (2018) Stakeholder inclusiveness in megaprojects: Managing the locals for sustainable developments. PhD thesis, Kingston University, UK.

Dias Jr, A and Ioannou, P G (1996) Company and project evaluation model for privately promoted infrastructure projects. Journal of Construction Engineering and Management, 122(1), pp. 71-82. ISSN 0733-9364

Diaz-Murillo, M (1993) A strategy for the implementation of quality function deployment in the design-construction industry. PhD thesis, Texas A&M University, USA.

Dib, H; Adamo-Villani, N and Issa, R R A (2013) A GIS-based visual information model for buildng construction project management. International Journal of Construction Management, 13(1), pp. 1-18. ISSN 1562-3599

Dib, H Y (2006) Visual information access and management for life cycle project management. PhD thesis, University of Florida, USA.

Dickson, R (2023) What's it going to take? Lessons learned from COVID-19 and worker mental health in the Australian construction industry. Construction Management and Economics, 41(9), pp. 758-780. ISSN 01446193

Diekmann, J E (2007) Past perfect: Historical antecedents of modern construction practices. Journal of Construction Engineering and Management, 133(9), pp. 652-660. ISSN 0733-9364

Dina Koutsikouri, D A A S (2006) Critical success factors for multidisciplinary engineering projects. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Ding, G (2013) Demolish or refurbish: environmental benefits of housing conservation. Construction Economics and Building, 13(2), pp. 18-34. ISSN 2204-9029

Dispoto, W A (2009) Selection and prioritization of leadership attributes: Creating a leadership model for the domestic construction industry. PhD thesis, Capella University, USA.

Dissanayake, D M Nayana S (2017) Fuzzy multi-attribute analysis model for engineering-procurement-construction contractor selection. PhD thesis, Queensland University of Technology, Australia.

Dissart, J C and Ricaurte, L (2023) Assessing social value in housing design: Contributions of the capability approach. Buildings & Cities, 4(1), pp. 867-882. ISSN 2632-6655

Dixit, A; Chauhan, R and Shaw, R (2025) Application of smart systems and emerging technologies for disaster risk reduction and management in Nepal. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 328-343. ISSN 1759-5908

Dixit, V; Chaudhuri, A and Srivastava, R K (2018) Procurement scheduling in engineer procure construct projects: A comparison of three fuzzy modelling approaches. International Journal of Construction Management, 18(3), pp. 189-206. ISSN 1562-3599

Dixon, M (2013) Title by registration or conquest: Interpreting the Land Registration Act 2002 in England and Wales. International Journal of Law in the Built Environment, 5(3), pp. 194-206. ISSN 17561469

Dmaidi, N (1995) Simplified estimating and control procedures for the offshore oil construction industry. PhD thesis, University of Dundee, UK.

Do, Q; Le, T and Le, C (2024) Uncovering critical causes of highway work zone accidents using unsupervised machine learning and social network analysis. Journal of Construction Engineering and Management, 150(3): 04023168, ISSN 0733-9364

Do, Q; Moriyani, M A; Le, C and Le, T (2023) Cost-weighted tf-idf: A novel approach for measuring highway project similarity based on pay items' cost composition and term frequency. Journal of Construction Engineering and Management, 149(8): 04023069, ISSN 0733-9364

Do, Q; Le, T; Trinh, M T and Le, C (2025) Multiobjective project clustering optimization for enhancing highway contract bundling decisions. Journal of Construction Engineering and Management, 151(11): 04025166, ISSN 0733-9364

Doan, D T and Chinda, T (2016) Modeling construction and demolition waste recycling program in Bangkok: Benefit and cost analysis. Journal of Construction Engineering and Management, 142(12): 05016015, ISSN 0733-9364

Doerstling, K W (2003) Building inspectors: Bureaucrats, professionals or heroes? PhD thesis, University of Southern California, USA.

Domdouzis, K (2007) Applications of wireless sensor technologies in construction. PhD thesis, Loughborough University, UK.

Domdouzis, K; Anumba, C and Thorpe, A (2004) Wireless sensor networking in the construction industry: Prospects and problems. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Domingo, L (2023) Influence of method and media interventions in creative remote design team collaboration. PhD thesis, Stanford University, USA.

Domínguez-Herrera, M M; González-Morales, O and González-Díaz, E (2023) Social responsibility of construction company as strategy for sustainability in island territories. Construction Economics and Building, 23(1-2), pp. 30-55. ISSN 2204-9029

Donato, Matteo (2016) The influence of resource dependency on collaboration in the construction supply chain. PhD thesis, Victoria University, Australia.

Donato, V; Lo Turco, M and Bocconcino, M M (2018) BIM-QA/QC in the architectural design process. Architectural Engineering and Design Management, 14(3), pp. 239-254. ISSN 1745-2007

Dong, Z.; Lu, W.; Wu, L.; Jiang, C. and Fu, Y. (2026) Efficiency-enhanced machine learning on blockchain (MLOB) framework for real-time construction activities recognition. Engineering, Construction and Architectural Management, pp. 1-19. ISSN 0969-9988

Dong, Z; Qin, R; Zou, P; Yao, X; Cui, P; Zhang, F and Yang, Y (2025) Occupational health risk assessment of PC production-caused pollution based on damage assessment and cyclic mitigation model. Engineering, Construction and Architectural Management, 32(6), pp. 3679-3699. ISSN 0969-9988

Dongjie, Y (2018) How to choose the agent construction mode in Chinese government investment projects? PhD thesis, ISCTE - Instituto Universitario de Lisboa, Portugal.

Donohoe, S and Coggins, J K (2015) Soft landings or a bumpy touch down? In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Dorward, F; Akintoye, A and Hardcastle, C (1997) Towards a composite cyclical leading indicator for private construction new orders. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Dorée, A and Miller, S (2008) Is technology a new challenge for the field of construction management? In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Dorée, A; Wal, G v d and Boes, H (2011) Client leadership in sustainability: How the Dutch railway agency created CO2 awareness in the industry. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Dorée, A G (1996) Tendering practice of Dutch municipalities. PhD thesis, University of Twente, Netherlands.

Dorée, A G (1997) Construction procurement by Dutch municipalities. Journal of Construction Procurement, 3(3), pp. 78-88. ISSN 1358-9180

Dossick, C; Osburn, L and Neff, G (2025) Innovation through practice: The messy work of making technology useful for architecture, engineering and construction teams. Engineering, Construction and Architectural Management, 32(7), pp. 4887-4899. ISSN 0969-9988

Dossick, C S and Sakagami, M (2008) Implementing web-based project management systems in the United States and Japan. Journal of Construction Engineering and Management, 134(3), pp. 189-196. ISSN 0733-9364

Dou, Y; Yan, X; Dong, B; Zhong, L and Lin, H (2026) Predicting the interorganizational diffusion of prefabricated construction technology: Agent-based modeling and simulation. Journal of Construction Engineering and Management, 152(3): 04025266, ISSN 0733-9364

Dou, Y; Xue, X; Wang, Y; Xue, W and Huangfu, W (2022) Evaluation of enterprise technology innovation capability in prefabricated construction in China. Construction Innovation, 22(4), pp. 1059-1084. ISSN 1471-4175

Dou, Y; Xue, X; Wu, C; Luo, X and Wang, Y (2020) Interorganizational diffusion of prefabricated construction technology: Two-stage evolution framework. Journal of Construction Engineering and Management, 146(9): 04020114, ISSN 0733-9364

Dowsett, R; Harty, C and Davies, R (2017) Epistemological differences and new technology in construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Dowsett R M, H C F (2013) Evaluating the benefits of BIM for sustainable design: A review. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Dreicer, G K (1993) The long span. Intercultural exchange in building technology: Development and industrialization of the framed beam in Western Europe and the United States, 1820-1870. PhD thesis, Cornell University, USA.

Drew, D S; Ho, L C Y and Skitmore, M (2001) Analysing a consultant's competitiveness in two-envelope fee tendering. Construction Management and Economics, 19(5), pp. 503-510. ISSN 01446193

Driessen, M (2014) Asphalt encounters: Chinese road building in Ethiopia. PhD thesis, University of Oxford, UK.

Du, J; Liu, B; Hu, Y and Castro-Lacouture, D (2024) Analyzing Prefabricated Components Supply Chain Cooperation Patterns with Multiparty Dynamics Using Evolutionary Game Theory. Journal of Construction Engineering and Management, 150(12): 04024175, ISSN 0733-9364

Du, Q; Zhang, Y; Zeng, L; Ma, Y and Li, S (2025) Dynamic assessment of the abatement effects of the low-carbon practices in the prefabricated building supply chain. Engineering, Construction and Architectural Management, 32(7), pp. 4918-4945. ISSN 0969-9988

Du Plessis, C (1999) Sustainable development demands dialogue between developed and developing worlds. Building Research & Information, 27(6), pp. 379-389. ISSN 0961-3218

Du Plessis, C (2001) Sustainability and sustainable construction: The African context. Building Research & Information, 29(5), pp. 374-380. ISSN 0961-3218

Du Plessis, C and Cole, R J (2011) Motivating change: Shifting the paradigm. Building Research & Information, 39(5), pp. 436-449. ISSN 0961-3218

Duan, P and Zhou, J (2023) Cascading vulnerability analysis of unsafe behaviors of construction workers from the perspective of network modeling. Engineering, Construction and Architectural Management, 30(3), pp. 1037-1060. ISSN 0969-9988

Duan, P; Zhou, J and Goh, Y M (2023) Safety risk diagnosis based on motion trajectory for construction workers: An integrated approach. Journal of Construction Engineering and Management, 149(11): 04023116, ISSN 0733-9364

Duan, P; Fu, X; Guo, H; Guo, P and Zhou, J (2025) Using graph attention network for causal reasoning of construction safety accidents. Journal of Construction Engineering and Management, 151(11): 04025167, ISSN 0733-9364

Duerr, D (1990) Lift of Shippingport reactor pressure vessel. Journal of Construction Engineering and Management, 116(1), pp. 188-197. ISSN 0733-9364

Duerr, D (1991) Transportation of shippingport reactor pressure vessel. Journal of Construction Engineering and Management, 117(3), pp. 551-564. ISSN 0733-9364

Duffy, F (2008) Linking theory back to practice. Building Research & Information, 36(6), pp. 655-658. ISSN 0961-3218

Duffy, F and Rabeneck, A (2013) Professionalism and architects in the 21st century. Building Research & Information, 41(1), pp. 115-122. ISSN 0961-3218

Duksh, Y S; Kaushik, B K; Sarkar, S and Singh, R (2010) Performance comparison of carbon nanotube, nickel silicide nanowire and copper vlsi interconnects: Perspectives and challenges ahead. Journal of Engineering, Design and Technology, 8(3), pp. 334-353. ISSN 1726-0531

Duksh, Y S; Kaushik, B K; Sarkar, S and Singh, R (2013) Analysis of propagation delay and power with variation in driver size and number of shells in multi walled carbon nanotube interconnects. Journal of Engineering, Design and Technology, 11(1), pp. 19-33. ISSN 1726-0531

Dulaimi, M F and Hwa, T F (2001) Developing world class construction companies in Singapore. Construction Management and Economics, 19(6), pp. 591-599. ISSN 01446193

Dulaimi, M F and Kumaraswamy, M M (2000) Procuring for innovation: The integrating role of innovation in construction procurement. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Duman, D U; Green, S D and Larsen, G D (2017) Competitive strategy and the role of narrative infrastructure: The case of Turkish contractors. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Duman, D U; Löwstedt, M and Sundquist, V (2022) Moving beyond business as usual? Exploring digital transformation in the Swedish construction sector. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Duncan, K; Philips, P and Prus, M (2009) The effects of prevailing wage regulations on construction efficiency in British columbia. International Journal of Construction Education and Research, 5(2), pp. 63-78. ISSN 1557-8771

Duncan, R; Neale, R H and Bagilhole, B M (1999) Equal opportunities and the reconciliation of work and family within the construction process. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Dunston, P S and Wang, X (2005) Mixed reality-based visualization interfaces for architecture, engineering, and construction industry. Journal of Construction Engineering and Management, 131(12), pp. 1301-1309. ISSN 0733-9364

Dutch, W G (1989) The capital cost aspects of the environmental impact of new highways in association with the new design technique: the commercial route methodology. PhD thesis, Loughborough University, UK.

Dzeng, R J (2006) Identifying a design management package to support concurrent design in building wafer fabrication facilities. Journal of Construction Engineering and Management, 132(6), pp. 606-614. ISSN 0733-9364

Dzeng, R J and Tommelein, I D (1997) Boiler erection scheduling using product models and case-based reasoning. Journal of Construction Engineering and Management, 123(3), pp. 338-347. ISSN 0733-9364

Dzeng, R J and Wu, J S (2013) Efficiency measurement of the construction industry in Taiwan: A stochastic frontier cost function approach. Construction Management and Economics, 31(4), pp. 335-344. ISSN 1466433X

Dzramado, E D; Asiedu, R O; Owusu-Manu, D G; Edwards, D J; Adesi, M and Acheampong, A (2025) Exploring the socioeconomic factors affecting green cities development. Smart and Sustainable Built Environment, 14(7), pp. 2112-2144. ISSN 2046-6099

Eaglestone, F N (1993) An improved method of requesting insurance under UK construction contracts. PhD thesis, City, University of London, UK.

Eames, M; Dixon, T; May, T and Hunt, M (2013) City futures: Exploring urban retrofit and sustainable transitions. Building Research & Information, 41(5), pp. 504-516. ISSN 0961-3218

Easa, S M and Hossain, K M A (2008) New mathematical optimization model for construction site layout. Journal of Construction Engineering and Management, 134(8), pp. 653-662. ISSN 0733-9364

East, E W and Kim, S (1993) Standardizing scheduling data exchange. Journal of Construction Engineering and Management, 119(2), pp. 215-225. ISSN 0733-9364

Eastman, C M and Sacks, R (2008) Relative productivity in the AEC industries in the United States for on-site and off-site activities. Journal of Construction Engineering and Management, 134(7), pp. 517-526. ISSN 0733-9364

Eaton, J R (1998) Architectural project briefing: A study of discovery, innovation and architectural problem statement. PhD thesis, University of Nottingham, UK.

Eaves S, G D G A (2013) Building healthy construction workers by better workplace design: Understanding the context. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Ebrahimy, Y; AbouRizk, S M; Fernando, S and Mohamed, Y (2011) Simulation modeling and sensitivity analysis of a tunneling construction project's supply chain. Engineering, Construction and Architectural Management, 18(5), pp. 462-480. ISSN 0969-9988

Edike, U E; Adenuga, O A; Idusuyi, D U and Oke, A A (2025) Effect of curing media on the performance of clay bricks partially stabilised with pulverised cow bone ash. Journal of Engineering, Design and Technology, 23(2), pp. 442-457. ISSN 1726-0531

Edirisinghe, R and Gunathilake, L (2025) IoT-based smart vest for heat stress management in construction. International Journal of Construction Management, 25(16), pp. 2137-2149. ISSN 1562-3599

Edum-Fotwe, F T; Gibb, A G F and Benford-Miller, M (2004) Reconciling construction innovation and standardisation on major projects. Engineering, Construction and Architectural Management, 11(5), pp. 366-372. ISSN 0969-9988

Edward Back, W and Bell, L C (1995) Quantifying process benefits of electronic data management technologies. Journal of Construction Engineering and Management, 121(4), pp. 415-421. ISSN 0733-9364

Edwards, B and Eckblad, J (1984) Motivating the British construction industry. Construction Management and Economics, 2(2), pp. 145-156. ISSN 01446193

Edwards, D J; Harris, P T and Holt, G D (1996) The greenhouse effect: impact upon and the role to be played by construction. Building Research & Information, 24(2), pp. 97-103. ISSN 0961-3218

Edwards, D J and Holt, G D (2000) Quantifying the cost of plant operators' productivity. Journal of Financial Management of Property and Construction, 5(1-2), pp. 85-92. ISSN 1366-4387

Edwards, D J and Holt, G D (2009) New stability field tests for construction excavators. Engineering, Construction and Architectural Management, 16(4), pp. 337-352. ISSN 0969-9988

Edwards, P J and Bowen, P A (1999) Risk and risk management in construction projects: concepts, terms and risk categories re-defined. Journal of Construction Procurement, 5(1), pp. 47-57. ISSN 1358-9180

Egbelakin, T; Wilkinson, S; Potangaroa, R and Ingham, J (2013) Improving regulatory frameworks for earthquake risk mitigation. Building Research & Information, 41(6), pp. 677-689. ISSN 0961-3218

Egbu, C O (2004) Managing knowledge and intellectual capital for improved organizational innovations in the construction industry: An examination of critical success factors. Engineering, Construction and Architectural Management, 11(5), pp. 301-315. ISSN 0969-9988

Egbu, C O; Gaskell, C and Howes, J (2002) The improvement of teamworking through the exploitation of IT: Lessons from the construction, manufacturing and finance sectors. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Eguchi, T S R I I I D A (2010) The role of the design practice as an arena for innovation. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Eilouti, B (2022) Form follows users: A framework for system-based design. Architectural Engineering and Design Management, 18(3), pp. 204-225. ISSN 1745-2007

Eizakshiri, F; Chan, P W and Emsley, M (2011) Delays, what delays? A critical review of the literature on delays in construction. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Ejohwomu, O; Olugboyega, O; Omopariola, E D and Ejohwomu, I J (2024) Exploring the discrepancy between bribery-related legal and social norms in public project procurement in Nigeria. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Ekanayake, B; Ahmadian Fard Fini, A; Wong, J K W and Smith, P (2024) A deep learning-based approach to facilitate the as-built state recognition of indoor construction works. Construction Innovation, 24(4), pp. 933-949. ISSN 1471-4175

Ekanayake, E M A C; Xue, J; Shen, G Q and Kumaraswamy, M M (2021) Dynamic supply chain vulnerability analysis of Hong Kong-Zhuhai-Macao Bridge construction: A topic modelling approach. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Eke, G; Elgy, J and Wedawatta, G (2019) Establishing a link between contractor selection strategy and project outcomes: Simulation study. Journal of Construction Engineering and Management, 145(10): 04019062, ISSN 0733-9364

Eken, G (2022) Using natural language processing for automated construction contract review during risk assessment at the bidding stage. PhD thesis, Middle East Technical University, Turkey.

Eker, S; Zimmermann, N; Carnohan, S and Davies, M (2018) Participatory system dynamics modelling for housing, energy and wellbeing interactions. Building Research & Information, 46(7), pp. 738-754. ISSN 0961-3218

Ekström, D (2019) Integrated structural and construction engineering: a study of project team performance in Swedish bridge design. PhD thesis, Chalmers University of Technology, Sweden.

Ekung, S; Odesola, I A and Adewuyi, T (2022) Green cost premium for attaining energy-efficiency rating in Nigeria's hot-humid residential buildings. International Journal of Building Pathology and Adaptation, 40(2), pp. 248-268. ISSN 23984708

El Anwar, O H E D (2009) Multi-objective optimization for temporary housing arrangements after natural disasters. PhD thesis, University of Illinois at Urbana-Champaign, USA.

El Hawary, M and Marzouk, M (2023) Predicting buildings life cycle sustainability behaviour using system dynamics. Architectural Engineering and Design Management, 19(4), pp. 323-339. ISSN 1745-2007

El Kholy, S M (1991) Time and architecture: Problems of duration and sequence in architectural design. PhD thesis, University of Pennsylvania, USA.

El Sawalhi, N I and El Agha, O (2017) Multi-attribute utility theory for selecting an appropriate procurement method in the construction projects. Journal of Construction in Developing Countries, 22(1), pp. 75-96. ISSN 1823-6499

El-Anwar, O and Chen, L (2013) Computing a displacement distance equivalent to optimize plans for postdisaster temporary housing projects. Journal of Construction Engineering and Management, 139(2), pp. 174-184. ISSN 0733-9364

El-Aroud, A S (1980) Road network investment model for developing countries. PhD thesis, Pennsylvania State University, USA.

El-Batal, R S (1995) Reasoning by abstraction for public works contracts using a blackboard architecture. PhD thesis, Polytechnic University, USA.

El-Bibany, H (1997) Parametric constraint management in planning and scheduling: Computational basis. Journal of Construction Engineering and Management, 123(3), pp. 348-353. ISSN 0733-9364

El-Diraby, T E (2012) Epistemology of construction informatics. Journal of Construction Engineering and Management, 138(1), pp. 53-65. ISSN 0733-9364

El-Itr, Z and Kangari, R (1994) Minority contractors: Framework for new policy development. Journal of Construction Engineering and Management, 120(3), pp. 632-648. ISSN 0733-9364

El-Itr, Z M (1992) Equal business opportunity programs in the construction industry: A framework for development and implementation. PhD thesis, Georgia Institute of Technology, USA.

El-Khatib, A and Salhieh, S M (2026) Interconnected success factors for offsite modular construction in developing economies: A fuzzy-DEMATEL approach. International Journal of Construction Management, 26(3), pp. 445-469. ISSN 1562-3599

El-Medany, W M (2014) A cost-effective programmable soc for network security using xilinx spartan 3an fpga. Journal of Engineering, Design and Technology, 12(2), pp. 280-291. ISSN 1726-0531

El-Rayes, K (2001) Optimum planning of highway construction under A+B bidding method. Journal of Construction Engineering and Management, 127(4), pp. 261-269. ISSN 0733-9364

El-Rayes, K and Kandil, A (2005) Time-cost-quality trade-off analysis for highway construction. Journal of Construction Engineering and Management, 131(4), pp. 477-486. ISSN 0733-9364

El-Sayegh, S (2018) Resource levelling optimization model considering float loss impact. Engineering, Construction and Architectural Management, 25(5), pp. 639-653. ISSN 0969-9988

El-adaway, I H (2008) Construction dispute mitigation through multi-agent based simulation and risk management modeling. PhD thesis, Iowa State University, USA.

El-adaway, I H; Ali, G G; Eissa, R; Abdul Nabi, M; Ahmed, M O; Elbashbishy, T and Khalef, R (2023) Construction Management and Economics 40th anniversary: Investigating knowledge structure and evolution of research trends. Construction Management and Economics, 41(4), pp. 338-360. ISSN 01446193

Elavaar Kuzhali S and Pushpa M K, P (2024) Adaptive deep learning for deep COVID-19 diagnosis. Journal of Engineering, Design and Technology, 22(3), pp. 763-794. ISSN 1726-0531

Elazouni, A; Alghazi, A and Selim, S Z (2015) Finance-based scheduling using meta-heuristics: Discrete versus continuous optimization problems. Journal of Financial Management of Property and Construction, 20(1), pp. 85-104. ISSN 1366-4387

Elbarkouky, M M G and Fayek, A R (2011) Fuzzy similarity consensus model for early alignment of construction project teams on the extent of their roles and responsibilities. Journal of Construction Engineering and Management, 137(6), pp. 432-440. ISSN 0733-9364

Elbarkouky, M M G and Robinson Fayek, A (2011) Fuzzy preference relations consensus approach to reduce conflicts on shared responsibilities in the owner managing contractor delivery system. Journal of Construction Engineering and Management, 137(8), pp. 609-618. ISSN 0733-9364

Elder, John (2007) The history of the master builders association of NSW: The first hundred years. PhD thesis, University of Sydney, Australia.

Eldosoky, A I (1987) Dealing with uncertainty in construction projects with particular reference to Egypt. PhD thesis, University of Manchester, UK.

Eldukair, Z A R (1988) Safety assessment and optimization of construction operations based on fuzzy sets. PhD thesis, University of Maryland, College Park, USA.

Eleftheriadis, E (2018) Decision-based and BIM-embedded optimisation framework for material, cost and carbon efficiency of RC building structures. PhD thesis, University College London, UK.

Elfving, J A (2003) Exploration of opportunities to reduce lead times for engineered-to-order products. PhD thesis, University of California, Berkeley, USA.

Elghaish, F; Matarneh, S; Abdellatef, E; Rahimian, F; Hosseini, M R and Farouk Kineber, A (2025) Multi-layers deep learning model with feature selection for automated detection and classification of highway pavement cracks. Smart and Sustainable Built Environment, 14(2), pp. 511-535. ISSN 2046-6099

Elghaish, F; Matarneh, S T and Alhusban, M (2022) The application of "deep learning" in construction site management: Scientometric, thematic and critical analysis. Construction Innovation, 22(3), pp. 580-603. ISSN 1471-4175

Elghaish, F; Matarneh, S T; Talebi, S; Abu-Samra, S; Salimi, G and Rausch, C (2022) Deep learning for detecting distresses in buildings and pavements: A critical gap analysis. Construction Innovation, 22(3), pp. 554-579. ISSN 1471-4175

Elghaish, F; Talebi, S; Abdellatef, E; Matarneh, S T; Hosseini, M R; Wu, S; Mayouf, M; Hajirasouli, A and Nguyen, T Q (2022) Developing a new deep learning CNN model to detect and classify highway cracks. Journal of Engineering, Design and Technology, 20(4), pp. 993-1014. ISSN 1726-0531

Elinwa, A U and Joshua, M (2001) Time-overrun factors in Nigerian construction industry. Journal of Construction Engineering and Management, 127(5), pp. 419-425. ISSN 0733-9364

Elkhatib, M M (1995) Developing an integrated highway information system for safety management using GIS. PhD thesis, Wayne State University, USA.

Elliott, J W; Thevenin, M K and Lopez del Puerto, C (2016) Role of gender and industry experience in construction management student self-efficacy, motivation, and planned behavior. International Journal of Construction Education and Research, 12(1), pp. 3-17. ISSN 1557-8771

Ellis, R C T; Wood, G D and Thorpe, T (2004) Technology-based learning and the project manager. Engineering, Construction and Architectural Management, 11(5), pp. 358-365. ISSN 0969-9988

Ellsworth-Krebs, K; Reid, L and Hunter, C J (2019) Integrated framework of home comfort: Relaxation, companionship and control. Building Research & Information, 47(2), pp. 202-218. ISSN 0961-3218

Elmisalami, T; Walters, R and Jaselskis, E J (2006) Construction IT decision making using multiattribute utility theory for use in a laboratory information management system. Journal of Construction Engineering and Management, 132(12), pp. 1275-1283. ISSN 0733-9364

Elmisalami, T E (2001) Developing a multi-attribute utility model (MAUM) for selecting information technologies in the construction industry. PhD thesis, Iowa State University, USA.

Elmualim, A A (2008) Moral leadership education in construction. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Elnabwy, M T; Khalaf, D; Mlybari, E A and Elbeltagi, E (2025) An integrated machine learning approach for evaluating critical success factors influencing project portfolio management adoption in the construction industry. Engineering, Construction and Architectural Management, 32(11), pp. 7449-7468. ISSN 0969-9988

Elshaboury, N; Mohammed Abdelkader, E; Al-Sakkaf, A and Bagchi, A (2025) A deep convolutional neural network for predicting electricity consumption at grey nuns building in Canada. Construction Innovation, 25(2), pp. 270-289. ISSN 1471-4175

Elyamany, A H M (2010) Developing a rational approach for contractor selection based on history of construction quality and long-term performance. PhD thesis, North Dakota State University, USA.

Elzarka, H M and Bell, L C (1995) Object-oriented methodology for materials-management systems. Journal of Construction Engineering and Management, 121(4), pp. 438-445. ISSN 0733-9364

Emekci, Ş (2018) A life cycle costing based decision support tool for cost-optimal energy efficient design and/or refurbishments. PhD thesis, Middle East Technical University, Turkey.

Emmanuel, R (2021) Urban microclimate in temperate climates: A summary for practitioners. Buildings & Cities, 2(1), pp. 402-410. ISSN 2632-6655

Emmitt, S and Heaton, B (2003) The introduction of Approved Document L: A study of enforced change. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Engida Woldemichael, D. and Mohd Hashim, F. (2011) A framework for functionbased conceptual design support system. Journal of Engineering, Design and Technology, 9(3), pp. 250-272. ISSN 1726-0531

Engida Woldemichael, D and Mohd Hashim, F (2011) A framework for function-based conceptual design support system. Journal of Engineering, Design and Technology, 9(3), pp. 250-272. ISSN 1726-0531

English, J (2002) The communication problems experienced by workforce on site, and their possible solutions. Journal of Construction Research, 3(2), pp. 311-321. ISSN 1609-9451

Enshassi, A (1997) Construction projects and the environment in Palestine. Building Research & Information, 25(2), pp. 111-114. ISSN 0961-3218

Enshassi, A; Al-Hallaq, K and Mohamed, S (2006) Causes of contractor's business failure in developing countries: The case of Palestine. Journal of Construction in Developing Countries, 11(2), pp. 1-14. ISSN 1823-6499

Enshassi, A; Choudhry, R M; Mayer, P E and Shoman, Y (2008) Safety performance of subcontractors in the palestinian construction industry. Journal of Construction in Developing Countries, 13(1), pp. 51-62. ISSN 1823-6499

Enshassi, A and Shaath, K (2007) Training assessment of palestinian contractors. Journal of Construction in Developing Countries, 12(1), pp. 39-58. ISSN 1823-6499

Eppler, M J (2007) Toward a visual turn in collaboration analysis? Building Research & Information, 35(5), pp. 584-587. ISSN 0961-3218

Erfani, A (2023) Data-driven risk modeling for infrastructure projects using artificial intelligence techniques. PhD thesis, University of Maryland, College Park, USA.

Ershadi, M; Jefferies, M; Davis, P and Mojtahedi, M (2021) Enhancing productivity in infrastructure development: The key role of project management offices. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Ertekin, A O (2013) Probabilistic life cycle cost optimization of bridges. PhD thesis, Rutgers The State University of New Jersey, School of Graduate Studies, USA.

Esa, M (2015) The influence of project manager’s cognitive styles on project success in the Malaysian construction industry. PhD thesis, University of Malaya, Malaysia.

Espinoza Vigil, A J and Booker, J D (2023) Building national disaster resilience: Assessment of enso-driven disasters in Peru. International Journal of Disaster Resilience in the Built Environment, 14(4), pp. 423-433. ISSN 1759-5916

Essaghouri, L.; Xu, F.; Zhu, C.; Aletoum, E. and Li, X. (2026) Two decades of embodied carbon in MENA's construction sector: Regional insights and policy implications. Journal of Construction Engineering and Management, 152(10): 04026171, ISSN 0733-9364

Esteves, I C A; Medeiros-Junior, R A and Medeiros, M H F (2018) NDT for bridges durability assessment on urban-industrial environment in Brazil. International Journal of Building Pathology and Adaptation, 36(5), pp. 500-515. ISSN 23984708

Etmektzoglou, Apostolos (2013) The impact of the financial crisis on industrial relations in Greek industry. DBA thesis, Nottingham Trent University, UK.

Everett, J G and Frank Jr, P B (1996) Costs of accidents and injuries to the construction industry. Journal of Construction Engineering and Management, 122(2), pp. 158-164. ISSN 0733-9364

Eyiah, A K (2001) An integrated approach to financing small contractors in developing countries: A conceptual model. Construction Management and Economics, 19(5), pp. 511-518. ISSN 01446193

Eziefula, U G; Opara, H E and Eziefula, B I (2020) Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria. Journal of Engineering, Design and Technology, 18(5), pp. 1053-1061. ISSN 1726-0531

Fabianski, C J C (2017) Complex partnership for the delivery of Urban Rail Infrastructure Project: how culture matters for the treatment of risk and uncertainty. PhD thesis, University College London, UK.

Fahmy, K A; Yahya, A and Zorkany, M (2022) A decision support healthcare system based on IoT and neural network technique. Journal of Engineering, Design and Technology, 20(3), pp. 727-748. ISSN 1726-0531

Faisol, N; Dainty, A R J and Price, A D F (2005) The concept of 'relational contracting' as a tool for understanding inter- organizational relationships in construction. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Fan, C; Li, X and Li, H (2024) Optimizing the regulation of commercial real estate presale deposits: The role of third-party regulation and the design of government incentives. Journal of Construction Engineering and Management, 150(10): 04024143, ISSN 0733-9364

Fang, D; Zhao, C and Zhang, M (2016) A cognitive model of construction workers' unsafe behaviors. Journal of Construction Engineering and Management, 142(9): 04016039, ISSN 0733-9364

Fang, Y and Ng, S T (2011) Applying activity-based costing approach for construction logistics cost analysis. Construction Innovation, 11(3), pp. 259-281. ISSN 1471-4175

Fang, Y and Ng, S T (2019) Genetic algorithm for determining the construction logistics of precast components. Engineering, Construction and Architectural Management, 26(10), pp. 2289-2306. ISSN 0969-9988

Faria, Bruna Fernanda de (2012) The influence of the solid waste disposal areas in campinas city, São Paulo state (Brazil) on water quality. PhD thesis, Universidade Estadual de Campinas, Brazil.

Farid, F (1981) Fair and reasonable markup (FaRM) pricing model: A present value approach to pricing of construction contracts. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Farmer, C M (2018) Constructing program management offices for major defense acquisition programs: Factors to consider. DEng thesis, George Washington University, USA.

Farmer, G and Guy, S (2010) Making morality: Sustainable architecture and the pragmatic imagination. Building Research & Information, 38(4), pp. 368-378. ISSN 0961-3218

Farmer, I W (1996) Performance of chain trenchers in mixed ground. Journal of Construction Engineering and Management, 122(2), pp. 115-124. ISSN 0733-9364

Farnsworth, C B; Beveridge, S; Miller, K R and Christofferson, J P (2015) Application, advantages, and methods associated with using BIM in commercial construction. International Journal of Construction Education and Research, 11(3), pp. 218-236. ISSN 1557-8771

Farnsworth, C B; Warr, R O; Weidman, J E and Mark Hutchings, D (2016) Effects of CM/GC project delivery on managing process risk in transportation construction. Journal of Construction Engineering and Management, 142(3): 04015091, ISSN 0733-9364

Farrington, J J (1987) A methodology to identify and categorize costs of quality deviations in design and construction. PhD thesis, Clemson University, USA.

Faruk, M; Ormerod, M; Newton, R and MacLennan, H (2010) A toolkit to measure attributes that support or hinder pedestrian movement on pedestrian crossings. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Fathi, M and Shrestha, P P (2022) Public-private partnership project performance analysis compared to design-build in highway projects. Journal of Construction Engineering and Management, 148(11): 04022118, ISSN 0733-9364

Faulkenberry, L M (1993) Impact of emerging contract employment patterns on training, competitiveness, and company operation in the electrical construction industry. EdD thesis, Texas A&M University, USA.

Faust, K M and Kaminsky, J A (2017) Building water and wastewater system resilience to disaster migration: Utility perspectives. Journal of Construction Engineering and Management, 143(8): 04017058, ISSN 0733-9364

Fazeli, A; Banihashemi, S; Hajirasouli, A and Mohandes, S R (2024) Automated 4D BIM development: The resource specification and optimization approach. Engineering, Construction and Architectural Management, 31(5), pp. 1896-1922. ISSN 0969-9988

Fazeli, A; Dashti, M S; Jalaei, F and Khanzadi, M (2021) An integrated BIM-based approach for cost estimation in construction projects. Engineering, Construction and Architectural Management, 28(9), pp. 2828-2854. ISSN 0969-9988

Fazeli, A; Jalaei, F; Khanzadi, M and Banihashemi, S (2022) BIM-integrated TOPSIS-fuzzy framework to optimize selection of sustainable building components. International Journal of Construction Management, 22(7), pp. 1240-1259. ISSN 1562-3599

Fazlipour, M and Samadzad, M (2026) Engineering and economic feasibility of a new prefabrication ecosystem for steel construction in diverse low-rise residential buildings. Journal of Construction Engineering and Management, 152(2): 04025238, ISSN 0733-9364

Federle, M O; Rowings, J E and Devany, T S (1993) Model of career choice for craftworkers. Journal of Construction Engineering and Management, 119(1), pp. 105-114. ISSN 0733-9364

Fellows, R and Liu, A M M (2000) Human dimensions in modelling prices of building projects. Engineering, Construction and Architectural Management, 7(4), pp. 362-372. ISSN 0969-9988

Fellows, R and Liu, A M M (2012) Managing organizational interfaces in engineering construction projects: Addressing fragmentation and boundary issues across multiple interfaces. Construction Management and Economics, 30(8), pp. 653-671. ISSN 1466433X

Fenais, A (2020) Developing an augmented reality solution for mapping underground infrastructure. PhD thesis, Arizona State University, USA.

Feng, H; Song, Q; Yin, C and Cao, D (2022) Adaptive impedance control method for dynamic contact force tracking of robotic excavators. Journal of Construction Engineering and Management, 148(11): 04022124, ISSN 0733-9364

Feng, K; Chen, S; Lu, W; Wang, S; Yang, B; Sun, C and Wang, Y (2023) Embedding ensemble learning into simulation-based optimisation: A learning-based optimisation approach for construction planning. Engineering, Construction and Architectural Management, 30(1), pp. 259-295. ISSN 0969-9988

Feng, K; Wang, S; He, L and Li, Y (2025) Leader–member exchange and emotional exhaustion in registered construction engineers: Mediating role of active management by exception and moderating role of self-esteem. Engineering, Construction and Architectural Management, 32(13), pp. 49-67. ISSN 0969-9988

Fernando, N; T.A, K D and Zhang, H (2024) An artificial neural network (ann) approach for early cost estimation of concrete bridge systems in developing countries: The case of Sri Lanka. Journal of Financial Management of Property and Construction, 29(1), pp. 23-51. ISSN 1366-4387

Fernie, S; Leiringer, R and Thorpe, T (2006) Change in construction: A critical perspective. Building Research & Information, 34(2), pp. 91-103. ISSN 0961-3218

Fernie, S; Weller, S; Green, S D; Newcombe, R and Williams, M (2001) Learning across business sectors: Context, embeddedness and conceptual chasms. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Fernández-Solís, J L (2008) The systemic nature of the construction industry. Architectural Engineering and Design Management, 4(1), pp. 31-46. ISSN 1745-2007

Ferreira, J (2024) Analysis of urban parameters via geoprocessing as a basis for city's master plans: The case of Ribeirão das Neves city, MG Brazil. International Journal of Building Pathology and Adaptation, 42(2), pp. 257-277. ISSN 23984708

Few, J F M (2021) Ventilation in occupied homes: measurement, performance and sociotechnical perspectives. PhD thesis, University College London, UK.

Figueiredo, W C (1995) A KBES to analyze the environmental impact of proposed highway design alternatives. PhD thesis, University of Central Florida, USA.

Filho, A J (1995) Technological change and informal housebuilding in Brazil. PhD thesis, University College London, UK.

Finch, E (1992) Environmental assessment of construction projects. Construction Management and Economics, 10(1), pp. 5-18. ISSN 01446193

Finch, E; Flanagan, R and Marsh, L (1996) Auto-ID application in construction. Construction Management and Economics, 14(2), pp. 121-129. ISSN 01446193

Finke, M R (1998) A better way to estimate and mitigate disruption. Journal of Construction Engineering and Management, 124(6), pp. 490-497. ISSN 0733-9364

Finnie, D (2012) Contract delay what is it and how are we performing? Construction Economics and Building, 12(1), pp. 83-91. ISSN 2204-9029

Finnimore, B (1986) The industrialisation of building: building systems and social housing in postwar Britain 1942 to 1975. PhD thesis, University College London, UK.

Fiorineschi, L; Conti, L; Rossi, G and Rotini, F (2024) Conceptual design of a small production plant for eco-friendly packaging. Journal of Engineering, Design and Technology, 22(4), pp. 1257-1281. ISSN 1726-0531

Firman, Tommy (1988) Labor flows and the construction industry: The case of housing development in Bandung, Indonesia. PhD thesis, University of Hawaii at Manoa, USA.

Firmenich, J (2017) Customisable framework for project risk management. Construction Innovation, 17(1), pp. 68-89. ISSN 1471-4175

Firouzi, A and Vahdatmanesh, M (2019) Applicability of financial derivatives for hedging material price risk in highway construction. Journal of Construction Engineering and Management, 145(5): 04019023, ISSN 0733-9364

Fisher, A (2014) Late modern industry: The politics, rhetoric, and design of industrialized housing in France, 1954-1981. PhD thesis, Northwestern University, USA.

Fisher, T F and Ranasinghe, M (2001) Culture and foreign companies' choice of entry mode: The case of the Singapore building and construction industry. Construction Management and Economics, 19(4), pp. 343-353. ISSN 01446193

Fitz, D V and Saleeb, N (2019) Examining the quality and management of non-geometric building information modelling data at project hand-over. Architectural Engineering and Design Management, 15(4), pp. 297-310. ISSN 1745-2007

Fogleman, V (2014) The contaminated land regime: Time for a regime that is fit for purpose (Part 1). International Journal of Law in the Built Environment, 6(1-2), pp. 43-68. ISSN 1756-1450

Folagbade, S O and Newlands, D M (2014) Suitability of cement combinations for carbonation resistance of structural concrete. Journal of Engineering, Design and Technology, 12(4), pp. 423-439.

Forbes, D; Smith, S and Horner, M (2008) Tools for selecting appropriate risk management techniques in the built environment. Construction Management and Economics, 26(11), pp. 1241-1250. ISSN 1466433X

Forbes, D; Smith, S D and Horner, M (2007) A case-based reasoning approach for selecting risk management techniques. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Forbes, D; Smith, S D and Horner, M (2009) Risk and its analysis in the sustainability assessment of the built environment. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Ford, B; Mumovic, D and Rawal, R (2022) Alternatives to air-conditioning: Policies, design, technologies, behaviours. Buildings & Cities, 3(1), pp. 433-447. ISSN 2632-6655

Ford, D N; Anderson, S D; Damron, A J; De Las Casas, R; Gokmen, N and Kuennen, S T (2004) Managing constructibility reviews to reduce highway project durations. Journal of Construction Engineering and Management, 130(1), pp. 33-42. ISSN 0733-9364

Ford, D N and Bhargav, S (2006) Project management quality and the value of flexible strategies. Engineering, Construction and Architectural Management, 13(3), pp. 275-289. ISSN 0969-9988

Fore, S and Mudavanhu, T (2011) Application of RCM for a chipping and sawing mill. Journal of Engineering, Design and Technology, 9(2), pp. 204-226. ISSN 1726-0531

Forgues, D (2008) Using boundary objects to generate better value in the construction industry. PhD thesis, University of Salford, UK.

Forgues, Daniel (2008) Using boundary objects to generate better value in the construction industry: Interpreting cases from an activity theory perspective. PhD thesis, University of Salford, UK.

Formoso, C T; Soibelman, L; De Cesare, C and Isatto, E L (2002) Material waste in building industry: Main causes and prevention. Journal of Construction Engineering and Management, 128(4), pp. 316-325. ISSN 0733-9364

Forsythe, P (2006) Consumer-perceived appearance tolerances in construction quality management. Engineering, Construction and Architectural Management, 13(3), pp. 307-318. ISSN 0969-9988

Forsythe, P (2008) Modelling customer perceived service quality in housing construction. Engineering, Construction and Architectural Management, 15(5), pp. 485-496. ISSN 0969-9988

Foruzanmehr, A and Vellinga, M (2011) Vernacular architecture: Questions of comfort and practicability. Building Research & Information, 39(3), pp. 274-285. ISSN 0961-3218

Foth, M (2018) Participatory urban informatics: Towards citizen-ability. Smart and Sustainable Built Environment, 7(1), pp. 4-19. ISSN 2046-6099

Foulds, C; Powell, J and Seyfan, G (2013) Investigating the performance of everyday domestic practices using building monitoring. Building Research & Information, 41(6), pp. 622-636. ISSN 0961-3218

Fox, S and Hietanen, J (2007) Interorganizational use of building information models: Potential for automational, informational and transformational effects. Construction Management and Economics, 25(3), pp. 289-296. ISSN 1466433X

Francis, V (2004) Supportive organisational cultures and their effects on male civil engineers. Construction Economics and Building, 4(1), pp. 1-10. ISSN 2204-9029

Francis, V and Lingard, H (2002) The case for family-friendly work practices in the Australian construction industry. Construction Economics and Building, 2(1), pp. 28-36. ISSN 2204-9029

Franz, B W and Olopade, J (2024) Exploring pathways to project success through project delivery team integration: A qualitative comparative analysis. Construction Management and Economics, 42(6), pp. 564-581. ISSN 01446193

França, Ana Judite Galbiatti Limongi (2016) Continuous improvement applied to standardized typology of buildings: Knowledge management in the context of the asset portfolio. PhD thesis, Universidade de São Paulo, Brazil.

Fraser, C and Zarkada-Fraser, A (2001) The philosophy, structure and objectives of research and development in Japan. Construction Management and Economics, 19(8), pp. 831-840. ISSN 01446193

Fredslund, L M; Gottlieb, S C and Leiringer, R (2019) Understanding supply chain integration as recoupling. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Freire, J and Alarcón, L F (2002) Achieving lean design process: Improvement methodology. Journal of Construction Engineering and Management, 128(3), pp. 248-256. ISSN 0733-9364

Friend, R M; Thinphanga, P; Macclune, K; Henceroth, J; van Gai Tran, P and Nghiem, T P (2015) Urban transformations and changing patterns of local risk: Lessons from the Mekong region. International Journal of Disaster Resilience in the Built Environment, 6(1), pp. 30-43. ISSN 1759-5916

Frommweiler, C and Poirier, E (2025) Facilitating the building commissioning process using building information modeling: An action-research project. Engineering, Construction and Architectural Management, 32(1), pp. 601-620. ISSN 0969-9988

Fuentes, M E G (2019) Co-creation and co-destruction of experiential value: A service perspective in projects. Built Environment Project and Asset Management, 9(1), pp. 100-117. ISSN 2044-124X

Fung, I W H and Tam, V W Y (2013) Occupational health and safety of older construction workers (aged 55 or above): Their difficulties, needs, behaviour and suitability. International Journal of Construction Management, 13(3), pp. 15-34. ISSN 1562-3599

Fung, I W H; Tam, V W Y; Chu, J O C and Le, K N (2022) A stress-strain model for resilience engineering for construction safety and risk management. International Journal of Construction Management, 22(12), pp. 2308-2324. ISSN 1562-3599

Gabe, J (2016) Successful greenhouse gas mitigation in existing Australian office buildings. Building Research & Information, 44(2), pp. 160-174. ISSN 0961-3218

Gade, A N; Jensen, C; Sandelin, S; Lilja, K and Joosten, F (2022) Sustainable Development Goals in construction engineering education: Comparison of current curricula in Denmark, Finland, and Belgium. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Gajendran, T; Brewer, G; Dainty, A and Runeson, G (2012) A conceptual approach to studying the organisational culture of construction projects. Construction Economics and Building, 12(2), pp. 1-26. ISSN 2204-9029

Gajendran, T; Brewer, G and Marimuthu, M (2013) Internationalisation of construction business and e-commerce: Innovation, integration and dynamic capabilities. Construction Economics and Building, 13(2), pp. 1-17. ISSN 2204-9029

Galea, N; Powell, A and Salignac, F (2023) The role of homosociality in maintaining men's powerfulness in construction companies. Construction Management and Economics, 41(2), pp. 172-182. ISSN 01446193

Gall, G (2012) Industrial conflict in the engineering construction industry in Britain. Construction Management and Economics, 30(7), pp. 535-544. ISSN 1466433X

Gallego Sánchez-Torija, J; García López, C and Fernández Nieto, M A (2024) Energy, water and economic savings by changing habits of users in twelve schools in Spain. Building Research & Information, 52(5), pp. 596-609. ISSN 0961-3218

Gambatese, J A (1996) Addressing construction worker safety in the project design. PhD thesis, University of Washington, USA.

Gambatese, J A (2003) Controlled concrete demolition using expansive cracking agents. Journal of Construction Engineering and Management, 129(1), pp. 98-104. ISSN 0733-9364

Gambatese, J A and Hallowell, M (2011) Factors that influence the development and diffusion of technical innovations in the construction industry. Construction Management and Economics, 29(5), pp. 507-517. ISSN 1466433X

Ganguly, I; Bowers, T; Eastin, I and Cantrell, R (2013) Role of green building programs in enhancing the usage of environmentally certified wood in the U.S. Residential construction industry. International Journal of Construction Education and Research, 9(3), pp. 183-202. ISSN 1557-8771

Gann, D (1997) Should governments fund construction research? Building Research & Information, 25(5), pp. 257-267. ISSN 0961-3218

Gao, M Y; Han, J; Yang, Y; Tiong, R L K; Zhao, C and Han, C (2024) BIM-based and IoT-driven smart tracking for precast construction dynamic scheduling. Journal of Construction Engineering and Management, 150(9): 04024117, ISSN 0733-9364

Gao, Q; Liu, B; Sun, J; Liu, C and Xu, Y (2023) Border-crossing frequencies of CO2 embodied in international trade of construction products for final demand. Engineering, Construction and Architectural Management, 30(6), pp. 2360-2380. ISSN 0969-9988

Gao, R and Liu, J (2019) Selection of government supervision mode of PPP projects during the operation stage. Construction Management and Economics, 37(10), pp. 584-603. ISSN 01446193

Gao, S; Jin, R and Lu, W (2020) Design for manufacture and assembly in construction: A review. Building Research & Information, 48(5), pp. 538-550. ISSN 0961-3218

Gao, Y; Liu, X; Zhang, S; Zhang, J and Guo, Q (2022) BIM application and collaboration in construction projects: A perspective of the Chinese construction market. Construction Management and Economics, 40(6), pp. 429-441. ISSN 01446193

Garcia Punhagui, Katia Regina (2014) Potential reducing of CO2 emissions and embodied energy in housing construction in Brazil by increasing the use of wood. PhD thesis, Universidade de São Paulo, Brazil.

Garcia-Lopez, N P (2017) An activity and flow-based construction model for managing on-site work. PhD thesis, Stanford University, USA.

García de Soto, B; Agustí-Juan, I; Joss, S and Hunhevicz, J (2022) Implications of construction 4.0 to the workforce and organizational structures. International Journal of Construction Management, 22(2), pp. 205-217. ISSN 1562-3599

García de Soto, D B; Streule, T; Klippel, M; Bartlomé, O and Adey, B T (2020) Improving the planning and design phases of construction projects by using a case-based digital building system. International Journal of Construction Management, 20(8), pp. 900-911. ISSN 1562-3599

García-León, R A; Quintero-Quintero, W and Rodriguez-Castilla, M (2020) Thermal analysis of three motorcycle disc brakes. Smart and Sustainable Built Environment, 9(2), pp. 208-226. ISSN 2046-6099

Garg, S and Misra, S (2023) Framework for estimating quality-related incentive and disincentive in construction projects. Journal of Construction Engineering and Management, 149(5): 04023018, ISSN 0733-9364

Gatti, M P (2018) Maintenance, reconstruction and prevention for the regeneration of historic towns and centers. International Journal of Disaster Resilience in the Built Environment, 9(1), pp. 96-111. ISSN 1759-5916

Gatton, T M (1991) Designing for construction automation: Advanced automation technologies for computer integrated construction. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Gbadamosi, S L and Nwulu, N I (2020) Optimal planning of renewable energy systems for power loss reduction in transmission expansion planning. Journal of Engineering, Design and Technology, 18(5), pp. 1209-1222. ISSN 1726-0531

Geekiyanage, D and Ramachandra, T (2021) Running costs indices for commercial buildings using the hedonic price imputation approach: A case of Sri Lanka. Construction Management and Economics, 39(8), pp. 704-721. ISSN 01446193

George, T. and Ganesan, V. (2026) Advanced cuttlefish optimizer-random decision forest (acordf) based design of fractional order pid controller for higher-order time-delay system. Journal of Engineering, Design and Technology, 24(4), pp. 1-34. ISSN 1726-0531

Gerber, J K and Yacoubian G.S, Jr (2001) Evaluation of drug testing in the workplace: Study of the construction industry. Journal of Construction Engineering and Management, 127(6), pp. 438-444. ISSN 0733-9364

Gerwick, B C (1990) Implementing construction research. Journal of Construction Engineering and Management, 116(4), pp. 556-563. ISSN 0733-9364

Geus, Lucio Marcos de (2016) A support model for defining the location of voluntary delivery points for small construction and demolition waste generators. PhD thesis, Pontifícia Universidade Católica do Paraná, Brazil.

Ghaeli, M R (1998) Pavement and bridge cost allocation analysis of the Intario intercity highway network. PhD thesis, University of Waterloo, USA.

Ghafoor, S.; Kocaturk, T.; Hosseini, M. R.; Weiss, M. and Barnett, M. (2026) Navigating complexity: Systems thinking insights on deploying the pss for circular economy housing. Architectural Engineering and Design Management, 22(1), pp. 1-18. ISSN 1745-2007

Ghafoori, M and Abdallah, M (2025) Multi-criteria decision support model for material and supplier selection in the construction industry. International Journal of Construction Management, 25(4), pp. 409-418. ISSN 1562-3599

Ghanbarpour, S; Mazaheripour, H; Mirmoradi, S H and Barari, A (2010) The effect of type and volume fraction (vf) of steel fiber on the mechanical properties of self-compacting concrete. Journal of Engineering, Design and Technology, 8(3), pp. 247-256. ISSN 1726-0531

Ghannad, P and Lee, Y C (2023) Optimizing modularization of residential housing designs for rapid postdisaster mass production of housing. Journal of Construction Engineering and Management, 149(7): 04023046, ISSN 0733-9364

Ghannoum, M; Assaad, J; Daaboul, M and El-Mir, A (2025) Deterministic and stochastic finite element modeling of reinforced concrete beams without stirrups containing plastic wastes. International Journal of Building Pathology and Adaptation, 43(4), pp. 614-632. ISSN 2398-4708

Gharaie, E; Lingard, H and Cooke, T (2015) Causes of fatal accidents involving cranes in the Australian construction industry. Construction Economics and Building, 15(2), pp. 1-12. ISSN 2204-9029

Gharehbaghi, K and McManus, K (2019) TIS condition monitoring using ANN integration: an overview. Journal of Engineering, Design and Technology, 17(1), pp. 204-217. ISSN 1726-0531

Ghodki, M K (2024) A new solar powered robotic arm guided master–slave electric motors of biomass conveyor. Journal of Engineering, Design and Technology, 22(3), pp. 739-762. ISSN 1726-0531

Ghodki, M K; Swarup, A and Pal, Y (2020) A new IR and sprinkler based embedded controller directed robotic arm for automatic cleaning of solar panel. Journal of Engineering, Design and Technology, 18(4), pp. 905-921. ISSN 1726-0531

Ghosh, A; Jha, S K and Hasan, A (2022) A scientometric review of technological applications in occupational health and safety management in the construction industry. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Ghosh, S; Kochhar, K; Sharma, A; Kaushal, S; Agrawal, J; Garg, A; Kumar, A and Dugar, Y (2016) Investigating structure generated turbulence using an unmanned aerial vehicle: A prelude to optimal ventilation strategies in India's upcoming smart cities. Smart and Sustainable Built Environment, 5(4), pp. 372-392. ISSN 2046-6099

Gibberd, J (2015) Measuring capability for sustainability: The built environment sustainability tool (BEST). Building Research & Information, 43(1), pp. 49-61. ISSN 0961-3218

Gibson-Graham, J K; Hill, A and Law, L (2016) Re-embedding economies in ecologies: Resilience building in more than human communities. Building Research & Information, 44(7), pp. 703-716. ISSN 0961-3218

Gil, N (2022) Megaprojects: A meandering journey towards a theory of purpose, value creation and value distribution. Construction Management and Economics, 40(7-8), pp. 562-584. ISSN 01446193

Gilbert, R T (1982) The limitations of the employment function of the construction sector: The case of Brazil. PhD thesis, University of London, University College London, UK.

Gilleard, J (1989) Computerized reference sources in the construction industry. Construction Management and Economics, 7(4), pp. 321-330. ISSN 01446193

Gillis III, W L (2013) Development of an integrative commissioning methodology for new-building construction. PhD thesis, Missouri University of Science and Technology, USA.

Gilly, B A; Touran, A and Asai, T (1987) Quality control circles in construction. Journal of Construction Engineering and Management, 113(3), pp. 427-439. ISSN 0733-9364

Gines, J A (2024) Mass timber utilization in architecture: Carbon sequestration, building materials and construction practices. PhD thesis, Mississippi State University, USA.

Ginevan, S R (2022) The difference of how gender perceives project complexity: A cross sectional study. PhD thesis, Capella University, USA.

Giorgi, Serena (2020) Circular economy and regeneration of building stock: Policy improvements, strategic partnerships and life cycle decision-making tools. PhD thesis, Politecnico di Milano, Italy.

Giritli, H; Sozen, Z; Flanagan, R and Lansley, P (1990) International contracting: A Turkish perspective. Construction Management and Economics, 8(4), pp. 415-430. ISSN 01446193

Giuliani, F; De Falco, A; Cutini, V and Di Sivo, M (2021) A simplified methodology for risk analysis of historic centers: The world heritage site of san gimignano, Italy. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 336-354. ISSN 1759-5916

Givoni, B; Khedari, J; Wong, N H; Feriadi, H and Noguchi, M (2006) Thermal sensation responses in hot, humid climates: Effects of humidity. Building Research & Information, 34(5), pp. 496-506. ISSN 0961-3218

Gkeredakis, E (2009) Explaining the distinctiveness of coordination through an in-depth study of a major construction project. PhD thesis, University of Liverpool, UK.

Gkritza, K (2006) Economic development effects of highway investment. PhD thesis, Purdue University, USA.

Glad, W (2012) Housing renovation and energy systems: The need for social learning. Building Research & Information, 40(3), pp. 274-289. ISSN 0961-3218

Glagola, C R and Sheedy, W M (2002) Partnering on defense contracts. Journal of Construction Engineering and Management, 128(2), pp. 127-138. ISSN 0733-9364

Glatte, T (2015) Location strategies: Methods and their methodological limitations. Journal of Engineering, Design and Technology, 13(3), pp. 435-462.

Glavinich, T E (1990) Development of a model microcomputer-based project management system. DrEng thesis, University of Kansas, USA.

Gledson, B; Williams, D and Littlemore, M (2018) Construction planning efficiency and delivery time performance: Analysing failure in task-level 'hit rates'. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Gluch, P and Bosch-Sijtsema, P (2016) Conceptualizing environmental expertise through the lens of institutional work. Construction Management and Economics, 34(7-8), pp. 522-535. ISSN 01446193

Godfrey Ochieng, E and Price, A D (2009) Framework for managing multicultural project teams. Engineering, Construction and Architectural Management, 16(6), pp. 527-543. ISSN 0969-9988

Golden, S K (2008) Immigration and construction: An analysis of the impact of immigration on construction project costs. PhD thesis, University of Maryland, College Park, USA.

Golizadeh, H; Hosseini, M R; Edwards, D J; Abrishami, S; Taghavi, N and Banihashemi, S (2019) Barriers to adoption of RPAs on construction projects: a task–technology fit perspective. Construction Innovation, 19(2), pp. 149-169. ISSN 1471-4175

Gomes, V and Da Silva, M G (2005) Exploring sustainable construction: Implications from Latin America. Building Research & Information, 33(5), pp. 428-440. ISSN 0961-3218

Gomez, C P (2002) A study of the situated practice of benchmarking in the UK construction industry. PhD thesis, University of Birmingham, UK.

Gomez, C P (2006) Reconceptualizing the management of technology in construction: A Malaysian perspective. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Gomez, M and Pryke, S (2009) An examination of tacit knowledge networks in a colombian construction project: Communities of practice and project culture. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Goncikowski, M (2022) The tactics of illumination of high-rise buildings in the cities skyline. Research by design on skyreach tower skyscraper in warsaw. Architectural Engineering and Design Management, 18(6), pp. 870-893. ISSN 1745-2007

Gong, X (2019) Vertical integration and reputation: the case of real estate companies. PhD thesis, University of Hong Kong, Hong Kong.

Goodarzizad, P; Mohammadi Golafshani, E and Arashpour, M (2023) Predicting the construction labour productivity using artificial neural network and grasshopper optimisation algorithm. International Journal of Construction Management, 23(5), pp. 763-779. ISSN 1562-3599

Goodfellow-Smith, M (2019) How can finance and insurance institutions help deliver sustainable city infrastructure? PhD thesis, University of Birmingham, UK.

Goodhew, S; Latour, J M; Duthie, J; Shirreff, H; Riddlestone, P; Metcalfe, J and Fox, M (2020) Hospital ward temperatures related to hypothermic risk in orthopaedic patients. Building Research & Information, 48(3), pp. 286-300. ISSN 0961-3218

Gorse, C; Dickinson, I; Ashraf, I; Whitehead, P; Shepherd, T; Smith, M and Platten, A (2010) Distribution and use of digital learning materials: An evaluation of a virtual maths website and surrounding activities. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Gorse, C A and Emmitt, S (2003) Investigating interpersonal communication during construction progress meetings: Challenges and opportunities. Engineering, Construction and Architectural Management, 10(4), pp. 234-244. ISSN 0969-9988

Gorse, C A; Emmitt, S; Lowis, M and Howarth, A (2000) A critical examination of methodologies for studying human communication in the construction industry. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Gosling, J; Naim, M; Sassi, P; Iosif, L and Lark, R (2008) Flexible buildings for an adaptable and sustainable future. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Gottlieb, S C; Frederiksen, N; Koch, C and Thuesen, C (2020) Hybrid organisations as trading zones: Responses to institutional complexity in the shaping of strategic partnerships. Construction Management and Economics, 38(7), pp. 603-622. ISSN 01446193

Gottlieb, S C and Jensen, J S (2016) Governmentalities of construction: From mortar to modular systems and markets. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Gouda Mohamed, A and Hathout, T (2025) Reinvigorating the process of contractor selection in adaptive reuse projects: a novel decision-making and evaluation paradigm. International Journal of Construction Management, 25(2), pp. 171-181. ISSN 1562-3599

Gough, K (1992) From bamboo to bricks: Self-help housing and the building materials industry in urban Colombia. PhD thesis, University of London, University College London, UK.

Gould, C H (1988) Rolling fours: Novel work schedule. Journal of Construction Engineering and Management, 114(4), pp. 577-593. ISSN 0733-9364

Goulding, J S (2000) GAPP-IT: A generic it training model for construction. PhD thesis, University of Salford, UK.

Goulding, J S; Pour Rahimian, F; Arif, M and Sharp, M D (2015) New offsite production and business models in construction: Priorities for the future research agenda. Architectural Engineering and Design Management, 11(3), pp. 163-184. ISSN 1745-2007

Gowri, K (1990) Knowledge-based system approach to building envelope design. PhD thesis, Concordia University, Canada.

Goyal, P K; Datta, T K and Vijay, V K (2012) Vulnerability of rural houses to cyclonic wind. International Journal of Disaster Resilience in the Built Environment, 3(1), pp. 20-41. ISSN 1759-5916

Goyal, S; Routroy, S and Singhal, A (2019) Analyzing environment sustainability enablers using fuzzy DEMATEL for an Indian steel manufacturing company. Journal of Engineering, Design and Technology, 17(2), pp. 300-329. ISSN 1726-0531

Gradeci, K and Labonnote, N (2020) On the potential of integrating building information modelling (BIM) for the additive manufacturing (AM) of concrete structures. Construction Innovation, 20(3), pp. 321-343. ISSN 1471-4175

Graham, D; Smith, S D and Crapper, M (2006) Refining the case-based reasoning model of construction processes. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Graham, D; Smith, S D and Tommelein, I D (2005) Cost of concrete placement for contractors. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Graham, P (2000) Building education for the next industrial revolution: Teaching and learning environmental literacy for the building professions. Construction Management and Economics, 18(8), pp. 917-925. ISSN 01446193

Gransberg, D D and Riemer, C (2009) Impact of inaccurate engineer's estimated quantities on unit price contracts. Journal of Construction Engineering and Management, 135(11), pp. 1138-1145. ISSN 0733-9364

Grant, A and Hinze, J (2013) Underlying causal factors associated with construction worker fatalities involving stepladders. Construction Economics and Building, 13(1), pp. 13-22. ISSN 2204-9029

Graversen, H (2022) Interchanges: Construction of the U.S. Interstate highway system and artistic practice, 1956-1984. PhD thesis, University of Chicago, USA.

Gravina da Rocha, C; El Ghoz, H B C and Jr Guadanhim, S (2020) A model for implementing product modularity in buildings design. Engineering, Construction and Architectural Management, 27(3), pp. 680-699. ISSN 0969-9988

Gravina da Rocha, C; Korb, S and Sacks, R (2022) Work structuring and product design for customized repetitive projects. Construction Management and Economics, 40(7-8), pp. 526-547. ISSN 01446193

Greasley, K; Bryman, N K A; Dainty, A R J and Price, A D F (2003) Perceptions of empowerment by construction senior management. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Grecksch, K and Holzhausen, J (2017) Property rights revisited: Are narratives the way forward? International Journal of Law in the Built Environment, 9(2), pp. 94-107. ISSN 1756-1450

Greed, C (1997) Cultural change in construction. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Green, S D and Liu, A M M (2007) Theory and practice in value management: A reply to Ellis et al. (2005). Construction Management and Economics, 25(6), pp. 649-659. ISSN 1466433X

Green, S D and May, S C (2003) Re-engineering construction: Going against the grain. Building Research & Information, 31(2), pp. 97-106. ISSN 0961-3218

Green, S D and Sergeeva, N (2020) The contested privileging of zero carbon: Plausibility, persuasiveness and professionalism. Buildings & Cities, 1(1), pp. 491-503. ISSN 2632-6655

Greenberg, D G (1978) Fixing things: A phenomenological study of ten persons. PhD thesis, Union Institute and University, USA.

Griffey, T (2011) Black power's labor politics: The united construction workers association and Title VII law in the 1970s. PhD thesis, University of Washington, USA.

Griffin, G S (1996) Complexity theory in construction management. PhD thesis, Colorado State University, USA.

Griffith, A (2006) Expanding knowledge and practice of construction management systems and procedures. DSc thesis, Sheffield Hallam University, UK.

Griffith, A and Sidwell, A C (1997) Development of constructability concepts, principles and practices. Engineering, Construction and Architectural Management, 4(4), pp. 295-310. ISSN 0969-9988

Gross, M E (2010) Aligning public-private partnership contracts with public objectives for transportation infrastructure. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Grosse, H (2018) Investigating trust in the German construction industry: a contractor's autoethnographic exploration of trust and Le?vinas. PhD thesis, University of Gloucestershire, UK.

Grosse, H (2018) Conflicts and alternative solutions: How hostilities obstruct alternative solutions. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Grosse, H (2022) Exploring sustainability and identities from an investor's perspective: An autoethnography. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Grove, E; Dainty, A; Thomson, D and Thorpe, T (2018) Becoming collaborative: A study of intra-organisational relational dynamics. Journal of Financial Management of Property and Construction, 23(1), pp. 6-23. ISSN 1366-4387

Groák, S (1994) Is construction an industry? Notes towards a greater analytic emphasis on external linkages. Construction Management and Economics, 12(4), pp. 287-293. ISSN 01446193

Gruneberg, S and Fraser, B (2012) Construction purchasing power parities: Potential roles and limitations. Building Research & Information, 40(3), pp. 348-356. ISSN 0961-3218

Gruneberg, S L; Hughes, W P and Ancell, D J (2007) Risk under performance-based contracting in the UK construction sector. Construction Management and Economics, 25(7), pp. 691-699. ISSN 1466433X

Grytnes, R; Tutt, D E and Andersen, L P S (2020) Developing safety cooperation in construction: Between facilitating independence and tightening the grip. Construction Management and Economics, 38(11), pp. 977-992. ISSN 01446193

Guerrero, J R and Lindblad, H (2018) Client strategies for stimulating innovation in construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Gunarathna, C; Yang, R; Wijeratne Mudiyanselage, P; Amarasinghe, G; Samarasinghalage, T; Weerasinghe, R P N; Zhao, H; Zhang, C; Liu, C; Wang, K and Dev Sureshkumar Jayakumari, S (2024) Project-based learning for proactive skills development of postgraduate students in solar energy building design digitalisation. Smart and Sustainable Built Environment, 13(4), pp. 828-855. ISSN 2046-6099

Gunning, J G (2003) The enhancement of quality in construction project management. PhD thesis, Ulster University, UK.

Gunning, J G (2008) Towards a more playful approach to construction management. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Gunning, J G and Hanna, J I C (2001) The application of risk management principles to crisis management in construction. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Gunning, J G and McAleenan, C (2010) Safe-T-Cert: An Irish solution to the universal problem of assuring construction safety. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Guo, L; Zhang, S; Wu, P; Wang, J and Jiang, S (2026) A review on the global communication research in construction: A bibliometric perspective. International Journal of Construction Management, 26(6), pp. 974-993. ISSN 1562-3599

Guo, K; Minchin, E and Ferragut, T (2005) The shift to warranties and performance specifications: What of method specifications? Construction Management and Economics, 23(9), pp. 953-963. ISSN 01446193

Guo, S; Ding, L; Zhang, Y; Skibniewski, M J and Liang, K (2019) Hybrid recommendation approach for behavior modification in the Chinese construction industry. Journal of Construction Engineering and Management, 145(6): 04019035, ISSN 0733-9364

Guo, S; Wang, J and Wu, H (2021) Profit distribution of IPD projects using fuzzy alliance. Engineering, Construction and Architectural Management, 28(8), pp. 2069-2089. ISSN 0969-9988

Guo, S; Wang, J and Xiong, H (2023) The influence of effort level on profit distribution strategies in ipd projects. Engineering, Construction and Architectural Management, 30(9), pp. 4099-4119. ISSN 0969-9988

Guo, Y; Su, Y; Chen, C and Martek, I (2024) Inclusion of "managing flexibility" valuations in the pricing of PPP projects: A multi-objective decision-making method. Engineering, Construction and Architectural Management, 31(11), pp. 4562-4584. ISSN 0969-9988

Gupta, R and Gregg, M (2012) Appraisal of UK funding frameworks for energy research in housing. Building Research & Information, 40(4), pp. 446-460. ISSN 0961-3218

Gupta, R; Gregg, M and Liu, C (2025) Local area energy mapping approach for high-density heat pump deployment. Buildings & Cities, 6(1), pp. 561-579. ISSN 2632-6655

Gurieva, V; Ilyina, A; Klyuev, S; Saidumov, M; Khezhev, T; Nedoseko, I; Fediuk, R; Shamanov, V and Yazyev, B (2025) Production of ceramic bricks using nickel slags as contribution to decarbonization. International Journal of Building Pathology and Adaptation, 43(4), pp. 652-664. ISSN 2398-4708

Gurmu, A T; Krezel, A and Mahmood, M N (2023) Analysis of the causes of defects in ground floor systems of residential buildings. International Journal of Construction Management, 23(2), pp. 268-275. ISSN 1562-3599

Gurtu, A and Goswami, A (2022) Emissions in different stages of economic development in nations. Smart and Sustainable Built Environment, 11(3), pp. 608-621. ISSN 2046-6099

Gussias, A (2002) Service life management of concrete harbour structures. DrIng thesis, Norges Teknisk-Naturvitenskapelige Universitet, Norway.

Gweon, G (2012) Assessment and support of the idea co-construction process that influences collaboration. PhD thesis, Carnegie Mellon University, USA.

Gyadu-Asiedu, W (2009) Assessing construction project performance in Ghana: modelling practitioners' and clients perspectives. PhD thesis, Eindhoven University of Technology, Netherlands.

Gyampoh-Vidogah, R (2002) Improving project administration in the construction industry using EDMS: an integrated IS/IT solution. PhD thesis, University of Wolverhampton, UK.

Güney, E E (2025) Conservation of the village institutes’ heritage as a driver of sustainable development. PhD thesis, Middle East Technical University, Turkey.

Haas, C; Waugh, L and Froese, T (2007) History and renaissance of construction engineering and management in Canada. Journal of Construction Engineering and Management, 133(9), pp. 678-683. ISSN 0733-9364

Haas, T C; Rodriguez, A M; Glover, R and Goodrum, P M (2001) Implementing a multiskilled workforce. Construction Management and Economics, 19(6), pp. 633-641. ISSN 01446193

Habermann, N and Hedel, R (2018) Damage functions for transport infrastructure. International Journal of Disaster Resilience in the Built Environment, 9(4-5), pp. 420-434. ISSN 1759-5916

Habib, M and Spang, K (2014) Alternative project delivery systems for transport infrastructure in Germany. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Habibi, S (2020) A review of ICT-based applications to monitor environmental parameters. Construction Innovation, 20(1), pp. 112-127. ISSN 1471-4175

Hachem, A A K; Khatib, J M and Ezzedine El Dandachy, M (2025) Assessment of interfacial mortar-mortar bond and pure shear strength of metakaolin-based geopolymer. International Journal of Building Pathology and Adaptation, 43(4), pp. 732-748. ISSN 2398-4708

Haddad, B (2007) Risk management in the contractual language in the construction industry: The effect of exculpatory clauses on contractor bid price. PhD thesis, Indiana State University, USA.

Hadizadeh-Bazaz, M.; Navarro, I. J. and Yepes, V. (2026) Smart integration of non-destructive damage detection and life-cycle assessment for sustainable maintenance of coastal bridges. Smart and Sustainable Built Environment, pp. 1-27. ISSN 2046-6099

Hadj, George (2024) Sustaining competitive advantage within the australian building industry: The strategic place of offshore procurement. PhD thesis, University of Melbourne, Australia.

Hagan, G; Bower, D and Smith, N (2011) Managing complex projects in multi-project environments. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Hagan, S K (2000) Gaining ground: The new contract between architecture and nature. PhD thesis, University of London, Birkbeck College, UK.

Hagerty, D J; Schmitt, N G and Vandevelde, G T (1988) Shot-rock fill construction: Case history. Journal of Construction Engineering and Management, 114(3), pp. 489-502. ISSN 0733-9364

Haghdadi, H (1989) The role of micro computers on the construction site. PhD thesis, Aston University, UK.

Hajarolasvadi, H and Shahhosseini, V (2022) Assignment of engineers to constructions project teams based on person-team fit. International Journal of Construction Management, 22(15), pp. 2895-2904. ISSN 1562-3599

Haji Md Yusof, I (2019) Development of lean design process for building construction projects. PhD thesis, University of Birmingham, UK.

Hajiashrafi, R (2025) Streamlined shapley value models for contribution-based compensation allocation in scheduling networks in construction project management. PhD thesis, Catholic University of America, USA.

Hajibabai, L; Aziz, Z and Peña-Mora, F (2011) Visualizing greenhouse gas emissions from construction activities. Construction Innovation, 11(3), pp. 356-370. ISSN 1471-4175

Hajj, C E; Jawad, D and Montes, G M (2021) Analysis of a construction innovative solution from the perspective of an information system theory. Journal of Construction Engineering and Management, 147(9): 03121003, ISSN 0733-9364

Hakkarainen, M.; Oskierko-Jeznacki, E. and Braham, W. W. (2026) Evaluation of the potential of water vapor to be used as a tracer gas for determining air change rates. International Journal of Building Pathology and Adaptation, 44(9), pp. 1-15. ISSN 2398-4708

Hale, D R; Shrestha, P P; Gibson, G E and Migliaccio, G C (2009) Empirical comparison of design/build and design/bid/build project delivery methods. Journal of Construction Engineering and Management, 135(7), pp. 579-587. ISSN 0733-9364

Halfawy, M M R (1998) A multi-agent collaborative framework for concurrent design of constructed facilities. PhD thesis, Ohio State University, USA.

Hall, D M (2017) The early stages of integrated project delivery: Institutionalization and impact on adoption of systemic innovations. PhD thesis, Stanford University, USA.

Hall, M and Tomkins, C (2001) A cost of quality analysis of building project: Towards a complete methodology for design and build. Construction Management and Economics, 19(7), pp. 727-740. ISSN 01446193

Hallowell, M R and Gambatese, J A (2010) Population and initial validation of a formal model for construction safety risk management. Journal of Construction Engineering and Management, 136(9), pp. 981-990. ISSN 0733-9364

Hallowell, M R; Hardison, D and Desvignes, M (2016) Information technology and safety: Integrating empirical safety risk data with building information modeling, sensing, and visualization technologies. Construction Innovation, 16(3), pp. 323-347. ISSN 1471-4175

Halpin, D W (2007) Fifty years of progress in construction engineering research. Journal of Construction Engineering and Management, 133(9), pp. 635-639. ISSN 0733-9364

Halpin, D W; Paulson, B C; Schub, A and Willenbrock, J H (1987) Construction education and research in central Europe. Journal of Construction Engineering and Management, 113(3), pp. 468-479. ISSN 0733-9364

Hamdi, I M (1996) Multimedia applications in construction project management: An owner's perspective. PhD thesis, University of Kentucky, USA.

Hamid, Z A and Anuar Mohamad Kamar, K (2012) Aspects of off-site manufacturing application towards sustainable construction in Malaysia. Construction Innovation, 12(1), pp. 4-10. ISSN 1471-4175

Hamidi, Behzad (2015) A BIM-based object-oriented data model to support sustainable demolition waste management decision making at end-of-life. PhD thesis, Virginia Tech, USA.

Hamilton, I G; Summerfield, A J; Steadman, J P; Stone, A and Davies, M (2010) Exploring energy integration between new and existing developments. Building Research & Information, 38(6), pp. 593-609. ISSN 0961-3218

Hamledari, H (2021) Impact assessment of blockchain-enabled smart contracts on the visibility of construction payments. PhD thesis, Stanford University, USA.

Hampson, K and Kwok, T (1997) Strategic alliances in building construction: a tender evaluation tool for the public sector. Journal of Construction Procurement, 3(1), pp. 28-41. ISSN 1358-9180

Hampton, D; Jin, J S and Clark, E A (1990) Foundation construction within wastewater-treatment plant. Journal of Construction Engineering and Management, 116(4), pp. 564-573. ISSN 0733-9364

Han, J and Huang, H (2023) Cooperative behavior, supervision, and contract choice in PPP projects: An evolutionary game theory approach incorporating an other-regarding preference. Journal of Construction Engineering and Management, 149(12): 04023140, ISSN 0733-9364

Han, J; Kim, J; Kim, S and Wang, S (2024) Effectiveness of image augmentation techniques on detection of building characteristics from street view images using deep learning. Journal of Construction Engineering and Management, 150(10): 04024129, ISSN 0733-9364

Han, J; Rapoport, A and Fong, P S W (2020) Incentive structures in multi-partner project teams. Engineering, Construction and Architectural Management, 27(1), pp. 49-65. ISSN 0969-9988

Han, S H and Diekmann, J E (2001) Approaches for making risk-based go/no-go decision for international projects. Journal of Construction Engineering and Management, 127(4), pp. 300-308. ISSN 0733-9364

Han, S S and Ofori, G (2001) Construction industry in China's regional economy, 1990-1998. Construction Management and Economics, 19(2), pp. 189-205. ISSN 01446193

Han, S-H (2004) A working prototype of distributed collaborative architectural design system. PhD thesis, University of Michigan, USA.

Han, Y; Li, Y; Taylor, J E and Zhong, J (2018) Characteristics and evolution of innovative collaboration networks in architecture, engineering, and construction: Study of national prize-winning projects in China. Journal of Construction Engineering and Management, 144(6): 04018038, ISSN 0733-9364

Han, Y; Shen, J; Zhu, X; An, B and Bao, X (2024) Interaction mechanisms of interface management risks in complex systems of high-speed rail construction projects: An association rule mining-based modeling framework. Engineering, Construction and Architectural Management, 31(5), pp. 2101-2127. ISSN 0969-9988

Handa, V and Adas, A (1996) Predicting the level of organizational effectiveness: A methodology for the construction firm. Construction Management and Economics, 14(4), pp. 341-352. ISSN 01446193

Hanggara, D and Wijeyewickrema, A C (2020) Vulnerability assessment of reinforced concrete buildings in Indonesia subjected to tsunami inundation forces. International Journal of Disaster Resilience in the Built Environment, 11(2), pp. 204-218. ISSN 1759-5916

Hanid, M (2014) Design science research as an approach to develop conceptual solutions for improving cost management in construction. PhD thesis, University of Salford, UK.

Hanna, A S; Menches, C L; Sullivan, K T and Sargent, J R (2005) Factors affecting absenteeism in electrical construction. Journal of Construction Engineering and Management, 131(11), pp. 1212-1218. ISSN 0733-9364

Hao, J L; Hills, M J and Huang, T (2007) A simulation model using system dynamic method for construction and demolition waste management in Hong Kong. Construction Innovation, 7(1), pp. 7-21. ISSN 1471-4175

Harmelink, D J and Rowings, J E (1998) Linear scheduling model: Development of controlling activity path. Journal of Construction Engineering and Management, 124(4), pp. 263-268. ISSN 0733-9364

Harmon, K M J (2003) Dispute review boards and construction conflicts: Attitudes and opinions of construction industry members. PhD thesis, Nova Southeastern University, USA.

Haroglu, H and Leiringer, R (2010) Achieving whole-life value: The challenges of service-led construction. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Haroon, M; Khan, R B N and Khitab, A (2025) Performance of concrete containing waste demolished concrete powder as a partial substitute for cement. International Journal of Building Pathology and Adaptation, 43(4), pp. 573-590. ISSN 2398-4708

Harre-Young, S; Bosher, L; Dainty, A and Glass, J (2009) The implications of the UK's counter-terrorism strategy on the construction sector. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Harris, H J (2008) Conquering winter: US consumers and the cast-iron stove. Building Research & Information, 36(4), pp. 337-350. ISSN 0961-3218

Harris, M A (2007) Developing a scorecard to evaluate the use of personal fall arrest systems. PhD thesis, University of Florida, USA.

Harris, R B (1992) A challenge for research. Journal of Construction Engineering and Management, 118(3), pp. 422-434. ISSN 0733-9364

Harris, R B and Ioannou, P G (1998) Scheduling projects with repeating activities. Journal of Construction Engineering and Management, 124(4), pp. 269-278. ISSN 0733-9364

Harris Sr., C E (2023) Public private partnerships in infrastructure: A study on performance and equity improvement. DBA thesis, National University, USA.

Hartenberger, U; Lorenz, D and Lützkendorf, T (2013) A shared built environment professional identity through education and training. Building Research & Information, 41(1), pp. 60-76. ISSN 0961-3218

Hartmann, A (2023) Learning between projects: An accomplishment of social-material practices in projects. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Hartmann, A and Girmscheid, G (2004) The innovation potential of integrated services and its utilisation through co-operation. Engineering, Construction and Architectural Management, 11(5), pp. 335-341. ISSN 0969-9988

Hartmann, A and Hietbrink, M (2013) An exploratory study on the relationship between stakeholder expectations, experiences and satisfaction in road maintenance. Construction Management and Economics, 31(4), pp. 345-358. ISSN 1466433X

Harty, C (2008) Implementing innovation in construction: Contexts, relative boundedness and actor-network theory. Construction Management and Economics, 26(10), pp. 1029-1041. ISSN 1466433X

Harty, C; Themsen, T N and Tryggestad, K (2014) Risk management and uncertainty in infrastructure projects: What role(s) for knowledge and construction management? In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Harty, C and Tryggestad, K (2012) The roles of representations in building design: Materiality and visualization. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Harty, C; Tryggestad, K and Jacobsen, P H (2015) Visualisations and calculations of spaces: Negotiating hospital design during on-boarding. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Harvey, E; Waterson, P and Dainty, A (2015) Comparing safety intelligence in air traffic management and construction: A conceptual comparison. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Hasan, A and Kamardeen, I (2022) Occupational health and safety barriers for gender diversity in the Australian construction industry. Journal of Construction Engineering and Management, 148(9): 04022100, ISSN 0733-9364

Hassan, O A B (2016) Effect of foundation designs of passive house on the thermal bridges at the ground. Journal of Engineering, Design and Technology, 14(3), pp. 602-613.

Hassan, O A B (2016) An integrated approach to assessing the sustainability of buildings. Journal of Engineering, Design and Technology, 14(4), pp. 835-850.

Hassan, P F (2005) A best practice framework for training UK construction site managers. PhD thesis, Sheffield Hallam University, UK.

Hassan, T M; McCaffer, R O N and Thorpe, T (1999) Emerging clients' needs for large scale engineering projects. Engineering, Construction and Architectural Management, 6(1), pp. 21-29. ISSN 0969-9988

Hassan, Z (1997) CONPLAN: Construction planning and buildability evaluation in an integrated and intelligent construction environment. PhD thesis, University of Salford, UK.

Hassanain, M A (2002) Integrated systems for maintenance management. PhD thesis, University of British Columbia, Canada.

Hassanein, A A G and Hakam, Z H R (1996) A bidding decision index for construction contractors. Building Research & Information, 24(4), pp. 237-244. ISSN 0961-3218

Hassanein, A A G and Khalifa, R A (2007) Financial and operational performance indicators applied to public and private water and wastewater utilities. Engineering, Construction and Architectural Management, 14(5), pp. 479-492. ISSN 0969-9988

Hassanein, A A G and Khalil, B N L (2006) Building Egypt 1: a general indicator cost index for the Egyptian construction industry. Engineering, Construction and Architectural Management, 13(5), pp. 463-480. ISSN 0969-9988

Hassanein, A A G and Khalil, B N L (2006) Developing general indicator cost indices for the Egyptian construction industry. Journal of Financial Management of Property and Construction, 11(3), pp. 181-194. ISSN 1366-4387

Hastak, M (1994) Decision support system for project cost control strategy and planning. PhD thesis, Purdue University, USA.

Hastak, M; Halpin, D W and Vanegas, J (1996) COMPASS: new paradigm for project cost control strategy and planning. Journal of Construction Engineering and Management, 122(3), pp. 254-264. ISSN 0733-9364

Hauer, M (2012) A game-based learning approach to building conservation education in UK undergraduate built environment degrees. PhD thesis, University of Portsmouth, UK.

Haupt, T C; Munshi, M and Smallwood, J (2005) HIV and AIDS in South African construction: Is age nothing but a number? Construction Management and Economics, 23(1), pp. 107-119. ISSN 01446193

Hauptfleisch, A C and Verster, J J P (2007) Mentoring: A key intervention in small construction contractor capacity building in South Africa. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Hautamäki, R; Kulmala, L; Ariluoma, M and Järvi, L (2025) How urban green infrastructure contributes to carbon neutrality. Buildings & Cities, 6(1), pp. 272-280. ISSN 2632-6655

Haynes, W A (2002) An exploration of the nexus of the public and private sectors in the project management organizations for two boston megaprojects: The central artery/tunnel project and the Boston Harbor cleanup. PhD thesis, Northeastern University, USA.

He, C.; Liu, M.; He, W.; Wang, Z. and Hsiang, S. (2026) Addressing the information silo of construction planning constraints: A graph retrieval augmented generation approach. Engineering, Construction and Architectural Management, 33(7), pp. 5565-5591. ISSN 0969-9988

He, C; Liu, M; Hsiang, S M; Pierce, N; Megahed, S and Godfrey, A (2025) An ontological knowledge-driven smart contract framework for implicit bridge preservation decision making. Journal of Construction Engineering and Management, 151(4): 04025008, ISSN 0733-9364

He, Y; Shi, L and Li, Z (2021) The combined effect of marginal social and private benefit on the socially optimal equity structure of PPP projects. Construction Management and Economics, 39(10), pp. 807-823. ISSN 01446193

Healy, J; Ryan, W; Stewart, S and Stewart, R (2002) Training needs analysis in an SME in the Irish construction industry. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Hearne, R (2013) Realising the "right to the city": Developing a human rights based framework for regeneration of areas of urban disadvantage. International Journal of Law in the Built Environment, 5(2), pp. 172-187. ISSN 17561469

Hecht, H R (2001) Development of major transportation projects in California. PhD thesis, University of California, Davis, USA.

Hedayati, M; Iyer-Raniga, U and Crossin, E (2014) A greenhouse gas assessment of a stadium in Australia. Building Research & Information, 42(5), pp. 602-615. ISSN 0961-3218

Hedborg Bengtsson, S (2019) Coordinated construction logistics: An innovation perspective. Construction Management and Economics, 37(5), pp. 294-307. ISSN 01446193

Hegazy, T; Shabeeb, A K; Elbeltagi, E and Cheema, T (2000) Algorithm for scheduling with multiskilled constrained resources. Journal of Construction Engineering and Management, 126(6), pp. 414-421. ISSN 0733-9364

Hegazy, T and Wassef, N (2001) Cost optimization in projects with repetitive nonserial activities. Journal of Construction Engineering and Management, 127(3), pp. 183-191. ISSN 0733-9364

Hegazy, T M (1994) Integrated bid preparation with emphases on risk assessment using neural networks. PhD thesis, Concordia University, Canada.

Hein, M F; Dougherty, M and Hobbs, T (2013) Cleaning methods for pervious concrete pavements. International Journal of Construction Education and Research, 9(2), pp. 102-116. ISSN 1557-8771

Hein, M F and Houck, K D (2008) Construction challenges of adaptive reuse of historical buildings in Europe. International Journal of Construction Education and Research, 4(2), pp. 115-131. ISSN 1557-8771

Helmrich, A M (2021) Alternative design approaches for advancing infrastructure resilience. PhD thesis, Arizona State University, USA.

Hema, C; Nshimiyimana, P; Messan, A; Lawane, A and Van Moeseke, G (2024) Reducing overheating risk in naturally ventilated houses through the design of compressed earth blocks walls in hot dry climate. International Journal of Building Pathology and Adaptation, 42(6), pp. 1203-1222. ISSN 2398-4708

Hemström, K; Gustavsson, L and Mahapatra, K (2017) The sociotechnical regime and Swedish contractor perceptions of structural frames. Construction Management and Economics, 35(4), pp. 184-195. ISSN 01446193

Henin, Eliya E A (2012) Efficient precast/prestressed floor system for building construction. PhD thesis, University of Nebraska - Lincoln, USA.

Henriksen, H M (2023) From science to sales: Changing representations of zero emission housing. Buildings & Cities, 4(1), pp. 594-611. ISSN 2632-6655

Herbert, M (2000) Performance and the virtual team. PhD thesis, Loughborough University, UK.

Hermans, M; van Zoest, S and Volker, L (2016) Assessing the maturity of public construction client organisations. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Hernandez Delgado, O A (1998) Decision-making for the selection of investment projects. PhD thesis, University of Nottingham, UK.

Hernandez Mendez, A (2018) Improving project performance through implementation of agile methodologies in the renewable energy construction industry. DEngr thesis, George Washington University, USA.

Hesse, K A (2006) Development of information communication technologies in construction project management: The relationship between theory and technology and its application to the construction industry, including a retrospective on the development of technology that demonstrates how theory was altered and how practice was influenced. PhD thesis, University College London, UK.

Hettiarachchi, M; Athukorale, K; Wijekoon, S and de Alwis, A (2014) Urban wetlands and disaster resilience of Colombo, Sri Lanka. International Journal of Disaster Resilience in the Built Environment, 5(1), pp. 79-89. ISSN 1759-5916

Heydari Torkamani, M; Shahbazi, Y and Belali Oskoyi, A (2024) Explaining resilience model of historical bazaars using artificial neural network. Smart and Sustainable Built Environment, 13(6), pp. 1538-1559. ISSN 2046-6099

Heylighen, A; Martin, W M and Cavallin, H (2007) Building stories revisited: Unlocking the knowledge capital of architectural practice. Architectural Engineering and Design Management, 3(1), pp. 65-74. ISSN 1745-2007